HP Pavilion TouchSmart 15-b130sa need new/charger lead and need help

Can someone help me find the correct replacement / charger lead for Pavilion TouchSmart 15. The number on the back of the laptop says 15-b130 his.

Don't know if it of useful or not.

Would be very grateful if there is someone out there who has the answer.

Thank you

Hello

Yes, I have. I have found some on Amazon, if the number I got is 15-130SA

Could you please confirm this?

Thank you

Sandy

Tags: Notebooks

Similar Questions

  • HP Pavilion TouchSmart 15-b130sa (lead/charger required) do not know the number

    Can someone help me find the correct replacement / charger lead for Pavilion TouchSmart 15. The number on the back of the laptop computer says 15 130 her. Don't know if it of useful or not.

    Would be very grateful if there is someone out there who has the answer.

    Thank you

    Hello

    Unfortunately I don't have coulnd't find part for you as well to the United Kingdom and the United States:

    http://PartSurfer.HP.com/WSearch.aspx?WCHAR=Y&SearchText=D4L77EA

    I can't find it in the list:

    http://www.shopping.HP.com/shopping/PDF/HP_NB_Battery_Compatibility_Chart.PDF

    Please try Amazon UK:

    http://www.Amazon.co.UK/15-B153CL-15-B130SA-15-B130EA-15-B120SG-compatible-replacement/DP/B00CCPJH00

    Kind regards.

  • HP Pavilion Touchsmart 14-b173: need drivers for integrated 10/100BASE-T Ethernet LAN, HP Pavilion Touchsmart 14-b173, Win7 64-bit

    I went down my laptop (HP Pavilion Touchsmart 14-b173TU ) Windows 8 for win 7 64 bit, but I can't connect to internet because I need the driver for network card (integrated 10/100BASE-T Ethernet LAN (RJ-45 connector). It is not found on the website of Hp.

    I tried earlier post for the same issue & the link provided doesn't have drivers available now. Someone at - he he. Thank you very much...

    Hello:

    You need this driver... a 2nd on the list...

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  • HP Pavilion Notebook - 15-p199: need help with the installation and activation of 10 Windows after completely uninstalling Windows

    Hello HP assistants.

    I need help for a specific problem. My laptop came with an installation of Windows 8.1. Then I upgraded to 10 Windows when it became available. After a while, I decided to uninstall Windows completely (to wipe the hard drive) and install a Linux operating system.

    Now, I decided that I want to use some software that is not available on Linux and if I want to reinstall Windows 10. My problem is that Windows has completely disappeared in a form any. So now, I need to download Windows 10 from an official source (which I think can be done fairly easily from the official source of Microsoft, although if there is a better, HP official medium to do this then please recommend it) and then I need to activate Windows some how.

    As has been made clear, I have the right to use Windows 8.1 and 10 but I would need to download Windows 10 and turn it on. Is there a way to do this? I'm literally stuck without solution.

    Thanks in advance.

    Hello

    As long as the previous installation of Windows 10 had activated Ok after upgrade from 8.1, you can simply perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

    http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

    Kind regards

    DP - K

  • HP Pavilion Notebook - 15-p233: need help to reset the password for notebook 15 "pavilion

    I need to reset the password for pavilion notebook 15 "15 p 233

    could you please help

    The error code generated after that 3 test is 687 47 264

    Thanks for your help!

    @simpleuser001

    Enter: 77625860

    Kind regards

    DP - K

  • HP Pavilion Slimline s5 - 1140d: need help with relocation to Windows 7 from Windows 10 Technical Preview

    Hello. I am currently using a Windows 10 Technical Preview in my office and want to install the official version of Windows 10. However, Microsoft has answered me, in order to install the FREE Windows Home 10 fresh new official retail version, I have to go back to the previous version which is Windows 7 then updated via windows update. I tried to check with HP Recovery Manager, but there is no option to return to windows 7. Only it has option to reset the tech 10 preview windows. So I went to the Microsoft website to download the ISO of Windows 7 files to install in flash player, it asks for the product key. And then I entered the key correctly which is stuck on my Windows product key sticker desktop. But he didn't and the message that this is a key of the OS preinstalled, contact your manufacturer. Now, I'm stuck with how to return to Windows 7! I need help ASAP! Thank you. I did backup and everything so much already.

    Yes, M$ makes it seem as if the OEM product key will work, but it does not work. There are choices and it depends on how you wish to just to proceed.

    As the model number is not included in the post, it is only a general Council, here.  You can make one of these to restore Windows 7 to useful step.

    (1) reinstall Windows from the recovery disks set - if you do not, order of HP for a low price ~ $ 25 - $30 US

    (2) check if the recovery Partition (usually D :) there is and run recovery from that)

    3) reinstall using Winows 7 retail disc and allows to activate the COA key

    (4) buy 10 Windows and install

  • Failure of hard drive on HP laptop DV 6000 Pavilion Windows XPsp3 OS - need help data recovery

    Failure of hard drive on HP laptop DV 6000 Pavilion - need help data recovery

    HP Pavilion DV 6108 NR, RG365UA, purchased late 2006 at best buy, with Windows XP, upgrade to Service Pack 3. It has a Fujitsu 60 GB HDD partitioned into C: and a D: Recovery.

    Windows tries to start, but goes to a blue screen with the message: "Unmountable Boot Volume" for a second, then just guard recycling until I force a shutdown.

    Phoenix BIOS, hard drive test result: "Fail #1-08".

    I ran a program to drive on the Cdrive analysis/recovery and it seems to show the directory structure intact, and he was able to recover some files. I used the free Seagate (which only retrieves the small files). The second pass only works so well and in the third set as the program says that I should not go further, and I need to contact a professional drive recovery company.

    However, drive D seems to be intact, so I wonder if the disc is damaged or just one aspect of the logical drive C is bad.

    How can I get the D: to run recovery on it software? The recovery discs, made by Best Buy, just proceed to the R / F / Q option screen, and when I press R, I get a blue screen every time.
    Pressing the F10 key at startup bothers me nowhere. Ditto the key F11.

    I don't like hard disk; This is the data (files, documents, images, etc.) that I want to.
    I contacted HP to order recovery disks, but they are no longer available for my computer.

    Any suggestions would be greatly appreciated!
    Jon

    Update...

    I found a site that offers the following:

    http://www.computersurgeons.com/p-13442-recovery-kit-435422-001-for-HP-model-number-dv6108nr.aspx

    Recovery Kit 435422-001 for HP model dv6108nr number

  • Pavilion dv6-3100sa: installed the new drive hard and now I need drivers windows 7

    Hi people,

    Can someone point me in the right direction for all the drivers for my laptop. I had to replace the hard drive and I can't get the correct drivers and software on the hp site.

    Windows 10 does not work on this machine because the graphics drivers are not available, so I need to re - install windows 7 original...

    any help is appreciated...

    Stephen

    Hello:

    All the drivers, specifications and manuals are missing from pages support again.

    This happened earlier in the week also.

    Another Member of the forum has reported the problem to administrators forum, which will be in touch tour HP, but since I am not employed by, nor do I represent HP, I don't know how long it will take to restore the missing data to the support pages.

    Whether the weekend will not help much either.

  • HP pavilion touchsmart slee 14: need network drivers

    I got this laptop for windows 7 Windows 8 for a friend, but now I can't get the network adapter to work. I do not have internet access on your laptop, wired or wireless, if it is difficult to test pilots. I have a flash drive.

    taken from the hardware ID for the device for the network card Manager and these

    PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01
    PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C
    PCI\VEN_168C & DEV_0032 & CC_028000
    PCI\VEN_168C & DEV_0032 & CC_0280

    Thanks in advance.

    Hello:

    See if this driver works...

    This package contains the installation package driver for LAN Qualcomm Atheros QCA9000 wireless controller series in the laptop models running a supported operating system.

    FTP://ftp.HP.com/pub/SoftPaq/sp70501-71000/sp70859.exe

  • Pavilion 15 p002st: I need help on the speed of the processor (HELP)

    When the computer is idle when browsing the Internet seems same 2.9 GHz processor 2.6. But when I went to the game processor speed 2.1 GHz fixed. Please help I need to increase the speed of the processor. If can be found, why wouldn't you be?

    Let me put it this way I wrote may be cancelled...

    System idle 2.9 Ghz

    2.1 game set

    How to play 2.9 can I do?

    HP Pavilion 15 p002 st

    AMD 10 5745 M

    HD8610G & R7M260

    SLYMN

    I have an older AMD desktop computer and it runs something called AMD Cool and quiet - which causes the processor to slow down when is not necessary. I like it because it causes run cooler, thus extending its life.

    You should check to see if you have it on your PC.

    Disable it CAN allow your CPU to run faster on a regular basis - it's worth a try.

    Good luck

  • HP Pavilion p6520y desktop PC: need help to upgrade my ram

    I have a HP Pavilion p6520y Desktop PC model #: WW636AA with a FOXCONN 2 92 motherboard, AMD 785 G Chipset. I'm currently upgrading my ram of the current 6gbs maximally whatever my computer supports. My motherboard says it supports up to 16gbs (since I am running Windows 7 64 - bit), and I'm trying to figure out what I should update.  I scanned my pc on Crucial and they gave me a bunch of suggestions, but I still don't know what I should buy.

    Analysis of the computer on the essentials: http://www.crucial.com/usa/en/scanview/65CC1E0131D926C3

    HP computer specifications: http://support.hp.com/us-en/document/c02179806

    Card mother: http://www.findlaptopdriver.com/foxconn-2a92-mainboard-specs-742010h517p/

    Is it smart to upgrade to the maximum ram and what type of memory should I update? In addition, my computer can even support 16gbs of ram? I have receieved conflicting information about it and I need to check the info I got is correct. I will include a picture of my computer listing of Speccy.

    There are a few suggestions on crucial, such as the Crucial Ballistix Sport 8 GB Kit (4GBx2) DDR3-1600 UDIMM LP or the Crucial Ballistix Sport 8 GB Kit UDIMM DDR3-1600 (4GBx2) or 8 GB Crucial Kit UDIMM DDR3-1600 (4GBx2) and so on. (I don't know if you can see the recommended memory when you view my scan. I guess you can, but might as well include some of them that I'm interested in.)

    Here are the specs of the computer of Speccy:

    Thanks for the help in advance!

    The funny thing is, I was about to buy this one right before I posted this, but I just wanted to see what others thought and if I'm right that my pc supports this amount of RAM. Thanks for the suggestion and response

  • HP Pavilion p7 - 1280t: Add a new card in the machine help gtx

    How will I know if my pc is compatible with the addition of a

    GeForce GTX 950

    I have already installed a 500 Watt power supply.

    I looked at the motherboard. Unless you replaced the motherboard (and I guess you haven't if you post here) you have a card mother IPISB-CU (Carmel2) in this machine. The unfortunate news is that you will not be able to use a GTX 950 with this motherboard.

    The reason? This bios on this motherboard is inherited and the latest graphics cards require UEFI. There is no update or the fix for it from HP. Your option is to find a graphics card that will run with a legacy bios or replace the motherboard.

    I just discovered this problem myself. I have a h8-1114 with the same motherboard. I bought a GTX 960 FTW assuming that HP offered updates for their hardware (bios). After hours on the phone with Nvidia, we finally understood that it was the bios. And a call to Evga quickly confirmed that it was the bios and there is no solution for it and HP is not providing an update problem.

    Personally I'm working on a limited budget, but the original video card that came with this machine is not an option for me (it was the newspaper ago given to my daughter for her machine to play Minecraft). I use an old GTX 260 we had laying around and can not read some of the games that I enjoy because of it.

    I've replace the mobo and will NEVER NEVER buy a pre-built computer.  HP has completely disgusted me with this machine. This isn't the first question I had and which would not have existed if I had built the machine myself.

    Here's the mobo, I chose to replace the piece of garbage HP which should be compatible with all other materials, you (your RAM, CPU, etc.).  http://www.Amazon.com/DP/B008NA1K0S/ref=wl_it_dp_o_pd_nS_ttl?_encoding=UTF8&ColId=MPPXIPPUEMIQ&coliid=I1YAAN0FVVCEWP

  • HP Pavilion Slimline s3760in D: need help in Clean install Windows 10 pro 64-bit?

    Hello

    For the past few months I am running windows 10 pro where I had to upgrade windows 8.1 pro 32 - bit windows 10 pro 32-bit. If my system is activated in windows 10 pro and it is authentic.

    When I checked in the type of system, it says operating system 32-bit, x 64 processor.  4 GB RAM only 3.12 GB of RAM is usable.

    This means that my processor supports 64-bit operating system. That's why I intend to clean windows install 10 pro and install the 64-bit version so that I can use all 4 GB of RAM.

    That's why went into a tool for creating media and downloaded Mediacreation Toolx64 but when I try to launch the app it shows error "this app cant run on your pc. But Mediacreation tool for 32 bit gently. According to me, given that my current OS is 32-bit so mediacreation toolx64 is not running.

    So I was wondering if I run 32-bit tool mediacreation and choose 'create multimedia installation for another pc' and chosen architecture (32-bit and 64-bit) times, then the clean installation of windows pro 10 OS will I have the option to choose between the version 64-bit and 32-bit version?

    [2] already my windows 10 pro is active in 32-bit version, I get a product key error when I clean install 10 pro for the 64 bit version of windows?

    [3] will be my windows 10 64-bit pro is activated? Since my windows 10 pro turned in a 32-bit version.

    Microsoft memo said "Your PC will activate online automatically as long as the same edition of Windows 10 has been activated successfully on this PC using the free Windows 10 upgrade offer."

    HI Varadar,

    You're right, you choose the installation program of the media creation tool that corresponds to your current system, but create a support for another PC and select 64-bit or both.  I would choose 64-bit.

    Yes, what you plan should work.  Once you have upgraded to Windows 10 32 - bit and Windows checked 10 32 - bit is set, you can use Media Setup to switch to Windows 10 64 - bit.  But... I could ask you to wait a month.  It was reported on the sites a Updatefor Windows 10 is expected in November.  This update will include some changes and corrections that we have already published to our group of insiders test.  The recent blog post is hereand scroll to the bottom of reading on the Activation stuff.  We also wrote about the changes, including the news of your task in our own forum.

    What do you think should work now today, if there is no problem or bug there is no backup.  But if you wait a bit, then the backup as explained will use your Windows 8.1 Pro key into your HP motherboard.

    I hope this helps,

    Charles

  • Pavilion DV6 3000 Entertainmet: Need help to install an SSD for my laptop

    Hello everyone, I want to get a SSD for my notebook to use as first HDD and system C, so I can have a better communication and speed faster for the system (like rendering, export audio & video).
    I can do in my HP Pavilion DV6 3000 entertainment? What type of SSD can adapt to the system?
    Running on Windows 10 (recently updated), Intel i5 M520 @2.4 GHz, Ati Radeon 1 Gb HD, 4 GB DDR3 Ram... HARD DRIVE 320 GB

    I don't want to talk negatively about a manufacturer's product, but it is a fact that we saw a few compatibility issues raised here on the Forum about an old series of SSD Crucial, the MX which is not what you're asking about. I have used other than the MX series Crucial SSD successfully, but they are not my first choice. Crucial is a very reputable company and will remain fully behind their product. If they say it is compatible you aren't risking anything to try it.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • SIS D7496A number HP Pavilion 4509 model 530 need help for upgrade hard drive

    I have a desktop HP Pavilion 4509. and have a hard drive 3,5 "(4,3 Go)." I want to replace or upgrade to 20 GB / 40 GB hard drive. is this possible? I also upgraded the memory (sdram) also. If possible, can someone tell me how I update my hard drive? should what brand I use?

    Thank you

    Dilip Kumar

    Dilip Kumar

    PC will have 40 GB of HDD (any brand).  Make sure that the drive is PATA (parallel).  SATA (serial) will not work.

Maybe you are looking for

  • NB250 - 10G - left button touchpad does not work

    I have a NB250 10 G which, until a few days ago had worked perfectly.However, I then found that I couldn't operate the netbook with the touchpad. However, it all works very well with my mouse USB plug-in.Everything seemed to go haywire with the touch

  • Help! I got this error 4MEM/62/40000000: 0x7f532190

    Hello world! Sorry to panic but I just got this error 4MEM/62/40000000: 0x7f532190 is that bad? Thank you!

  • CRIO Commucation with PLC

    Hi guys, I am trying to build the commucation between my CRIO9066 and PLC300, which means I want the CRIO to get data of PLC, but I don't know how to implement it, could someone give me a hand?      Moreover, I did possible communication between Labv

  • Important message to act

    I get a message from update to 8.1 and when I entered my product number, said that HP does not even recognize this computer. I'm not too tech savvy and I got it for Christmas and I am constantly to the red mark. I have the HP ENVY 15 laptop, I have n

  • 2702i convert offline

    Hi netpro,. I'm having some trouble trying to get a new 2702i to convert standalone / autonomous mode. I did what most of the articles say you should do. First SSH into AP, have it search the ios file that needs to be renamed to .default. (full name: