HP PAvillion M7U61EA #ABH: HDMI port no longer works

Similar Questions

• HDMI port no longer works on Mac Mini

  Hello

  I have a Mac Mini and I use usually 2 screens Dell. Everything worked fine until a couple of days, now the screen plugged into the HDMI port is no longer recognized. I changed monitors around and that did not help. Only the screen plugged on the stroke of lightning to the HDMI adapter works. I tried to use views to detect, but it still does not detect it. I unplugged and re plugged both monitors and restarted my computer. I don't know what else to do or if my Mac Mini is now a lost cause!

  Help, please!

  -Try resetting the SMC

  MacIntel: Reset of the controller (SMC) system management

  Then, connect a monitor to the HDMI port and see if the screen works when booting with the down Option. You should see drives bootable on the screen. This does not imply the OSX so if it works not that indicates a hardware problem

  If it works try to start normally with only this screen connected to HDMI. If this does not work then:

  Try resetting the NVRAM EXTRA memory

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• HDMI port no longer works on Satellite Pro R50 - B

  I was using an AOC monitor as a second monitor attached to my laptop via HDMI Windows 8.1.

  The monitor says there is no signal from the HDMI port. I changed the cable and changed the port on the monitor, but it still does not work.

  Can you help me?

  Could you give more information:

  1. What model of laptop do you have?
  2. What system is pre-installed?
  3. Have you tried to reinstall the graphics driver?

• 23 - d060qd envy: input set Windows 10 Upgarde HDMI port no longer works

  Just updated my PC Envy 23 to 10 Windows desktop computer.  I have a game on the PC HDMI input connection that I use in conjunction with my work laptop.  After the upgrade when I press the button for the game of entry so I can see my laptop using the view envy, nothing happens.   Is there a setting that needs to be changed 23 WANT to receive entrance to the laptop?  Help

  I've updated the hp my display application and it started working

• Ethernet port no longer works

  Hello

  I have an iMac (21.5 inch, mid 2011) running OSX 10.11.3 and today my ethernet port no longer works.

  Things I've tried:

  • Put the cable on another computer. The cable works fine.
  • Several reboots of the imac.
  • Go to safemode (SHIFT key at startup), still does not see the ethernet port.
  • Past to recovery (command + R to start) mode, the ethernet port is functioning normally. (Now I'm confused)

  Thus, it works in recovery, but not in normal mode or safe mode.

  Thanks in advance for any advice.

  -Ethernet-WiFi-Bluetooth-system-default-Mac-Macintosh/ http://mandarapte.com/Apple/Reset-Rebuild-Network-Settings-Preferences-including

• Satellite Pro L20 USB ports no longer work

  Hello

  A little bit ago, I experienced a few problems with my Satellite Pro L20. After he brought to life, I found out that the USB ports no longer work.

  Things I've tried so far:

  Reinstall the chipset drivers
  Update the BIOS.
  Ensure USB is enabled in BIOS
  Uninstall and reinstall the USB controllers via the Device Manager.

  

  The USB ports no longer work and I ran out of things to try. Any suggestions?

  Thank you

  Hello

  If possible, try to install the operating system with recovery media. On this way, you will have to factory settings. It's the best test you can do. If the problem persists, it may be a malfunction of the equipment. Sorry but on this path is not easy to tell what the problem may be.

• None of my USB ports no longer works

  Original title: activate the usb port

  Suddenly, the usb ports no longer work.

  Used a recoverypoint, but did not help

  Remove all usb ports and new discovered computer and installs but no result.

  There is power on the ports becase that a usb fan works

  What to try?

  Hi JoopSteenhuis,

  Try the methods and check the results below:

  Method 1: Run the patch from the link mentioned below and check if the issue still persistent.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   

  Method 2: Remove and reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  a. click Start, click run, type sysdm.cpl in the Open box and then click OK.

  b. click on the hardware tab.

  c. click the Device Manager button.

  d. expand Bus USB controllers.

  e. right-click every device under the USB Bus controllers node, and then click Uninstall to remove one at a time.

  f. restart the computer, and then reinstall the USB controllers.

  g. plug in the removable USB device and perform a test to ensure that the problem is solved.

  You can also see the following article for more information:

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

   

  I hope this helps.

• USB ports no longer work

  all usb ports no longer work and I tried to fix all the methods have failed and he tells me that all drivers are installed and work properly... not

  all my devices that worked in one of the 3 usb ports. I tried all methods on the 'help' with questions. I get a msg that says that all devices are up to date and working properly but it always starts as "computer does not recognize this device ' click here to solve. I can't solve

  Hello

  You did all the people?

  Try a Place Upgrade or repair Installation. If this does not work, you will need help of a
  real computer store (not the leeks and the glances at a BestBuy or other big box stores) or the system
  Support from the manufacturer.

  This tells you how to access the System Recovery Options and/or use of disks of Vista
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  How to perform a repair for Vista Installation (this keeps your data if the backup off the)
  Player is safe)
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  --------------------------------------------------------------------------

  Or you could do a clean install.

  How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on
  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  How to do a Custom Installation of Vista - this is a clean install should, however, save your data
  http://www.Vistax64.com/tutorials/241565-custom-install-Vista.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HDMI port does not work

  Original title: HDMI port stopped working after the update.

  This morning my laptop did an automatic restart to install updates and now my hdmi port does not work. I tried to restore the system to a previous point, but that has not helped. I have a HP Pavilion dv6.

  I worked with a team of online crash analysis and they had update me of the BIOS. That fixed the problem and the HDMI port is now working again. For those of you who have the same problem, go to http://ftp.hp.com/pub/softpaq/sp48501-49000/sp48953.exe .

  Update your BIOS can help you too.

• HDMI port does not work after you refresh the computer.

  Updated my computer and now my HDMI port does not work. I can not connect my labtop to TV.

  Are you sure that the additional monitor is turned on.  Try holding down the and then press P until it is selected to extend the screens.

  If this does not work, go to your computer manufacturer's website and download and install the latest version of your graphics drivers.

• Satellite R830 - HDMI port does not work

  Hello

  Is there a driver for the HDMI for the Satellite R830 port?
  It is no longer connects to a TV.

  I tried different TV but still nothing.
  Also there is no HDMI in under the control panel Device Manager, should there be?

  Thank you very much for any help or advice.

  Hello
  I put t know what Windows system that you use on this laptop, but the driver HDMI isn't available from the HDMI port driver is part of the system and should be recognized automatically.

  Capacity Audio HDMI you need to install the right audio driver and should allow this in Control Panel-> sound-> playback device

  HDMI (digital out) would be not listed there, right click and choose:
  Show devices disabled, view hidden devices.

  Usually the HDMI connection isn t very delicate. Everything should run automatically.
  Connect both devices with a HDMI cable.
  Turn on the TV, then the computer.
  Now, use the exit function FN (key) video combination in order to get to the video (HDMI).

  Note: the correct HDMI channel must be selected on your TV

  All that s

• HDMI connection no longer works on Studio 15 laptop computer

  I have a portable Studio 15, which is only 6 months old and I regularly used the HDMI output to connect directly to my Sony Bravia TV to watch the BBC iPlayer, etc..  It worked perfectly well until Thursday when I plugged the HDMI cable and the laptop was not thankful it being attached another screen.  Normally, what happens is that once the cable is connected the laptop automatically detects the TV and switches on the TV as my main screen and my laptop as the secondary display screen.  If I close the lid of the laptop the TV remains as main display.

  Thursday, but nothing.  I have reset the TV to factory settings, I also checked the cable and it worked very well and so was the TV when I plugged in my Blu Ray player.  I'm afraid that the HDMI port on the laptop can be fried, but I wanted to check other options before calling Dell.  Unfortunately, I don't have access to another screen/TV with HDMI, so I am not able to check if the HDMI Jack on the laptop is dead.  There has been no updates installed on the laptop just before this problem and as far as I can say that nothing had changed between my Wednesday night disconnect and try to reconnect the cable on Thursday night.  I even tried FN + F8 nothing consider the laptop is not recognizing the fact that TV is not recognized as a screen is not recognized in the first place.

  As I mentioned above, the laptop is old with only 6 months: -.

  Vista Ultimate (fully updated)

  256MB ATI Mobility RADEON HD 3450

  Any help provided would be fantastic.

  Have you been in display properties and made sure the 'Extend' option is enabled?

• Pavilion dv6-6c55se: My HDMI port is not working

  Hello

  I upgraded my windows to 8.1 - 64 bit and after that I found my HDMI port and Bluetooth does not work, since this page, I have Download Intel high definition (HD) Graphics Driver that complete the installation with an error that says:

  ---------------------------
  This computer does not meet the minimum requirements for installing the software.

  ---------------------------
  also, I downloaded Qualcomm-Atheros Bluetooth 4.0 + HS Driver for Microsoft Windows, but nothing happened, however, I'm prety sure that my bluetooth product is the Intel® PROSet/Wireless software for Bluetooth® technology (it was the previous windows driver) that I downloaded from this link, and it didn't work.

  I'd appreciate if someone helps me.

  Procuct model: pavilion dv6-6c55se

  Maybe your model didn't need driver wireless button.

  The dv6-7000 models require this driver running W8/8.1.

  Most of the older models do not use it, but I didn't know where the break was.

  I just guess that maybe that was the problem.

  Unfortunately, I don't have any other suggestions for you to try.

  I have rarely, if ever use bluetooth, so I have zero skills of troubleshooting for bluetooth.

• USB ports no longer works after L7680 OfficeJet Pro printer installed...

  I am running Windows XP Pro SP3.  Before you load the printer all my ports worked (4 on the monitor, 2 on the front of the PC).  Once I'm installing all of them stop working.  The only option is to work with one on the front of the printer.   I am able to get my Western Digital HD to work on the USB port printer, but this one is fickle and only works sometimes (I have to restart to operate when it gives out).  I'm not able to use on the printer port USB flash drives. I f the usb port on the printer does not work, so I have no options.  I tried with a powered hub and it works at all.

  I was chatting with representatives of HP without result. If a HUB on the printer does not work it is a useless tool for me.  I need one that has no readers, etc.  Is this a reason to return to the item under warranty?  Or y at - it a way to get this thing to work.

  HP wants to tell me it's Dell.  Dell says it's HP.  I'm so confused and frustrated.

  What I discovered, after about 3 years, the computers are generally obsolete.  My computer was 1.1 ports and the printer connection 2.0.  As see you all new USB components say they are 2.0, but can work with 1.1.  Long story short, after reading this somewhere, I decided that I had to upgrade my ports.  I went to Microcenter (they have an online store as well) and bought a USB 2.0 PCI Card for $11.00.  At opened her top and broke in the new port and everything works well again.  It may not be what you want to hear, but it was all I could do.  I was told all empty printer resources USB and this is why the upgrade was necessary.  Hope this makes some sense to you.

• On Latitude E6250 HDMI port has never worked

  Hello,
  
  I've got a Latitude E6520, and I haven't been able to use my HDMI port. Here's what I've tried:
  
  1. Pushing Fn+F8 or Windows key+P incessably to change displays and test all possible modes.2. Updated the Intel HD driver to the latest recommended version by Dell - that is 9.17.10.2867.3. Open display properties and click Detect and Identify. This creates a second display (aside from the embedded screen), showing as device "Display output device" (maybe not an accurate translation - my windows copy is in French). When clicking this, and then checking the creating display in the Intel HD panel, I realize this is Intel WiDi - not the intended HDMI port.
  
  My HDMI cable is working; it has been tested successfully in other devices. My BIOS version is A13.
  

  Any ideas?
  

  Thanks!
  

  Juan
  

  I got it. In case anyone has the same problem, I had to install the NVIDIA Control Panel since the support downloads for my Latitude E6250. I don't understand why I needed this, as my graphics chip is Intel HD 3000, and I do not know what NVIDIA has to do with it. But this solved my problem.

  And Dell has to watch "community contributors" with unnecessary remarks on cables at low price or brand of monitor. They are less useless.