HP photosmart 7525: printing from tray automatic feeder

Similar Questions

• HP LASERJET 4050: HP LASERJET 4050 PRINT JOBS WILL NOT PRINT FROM TRAY 2

  I have a HP Laserjet 4050 printer and it won't tank prnt 2.  It prints from the manual feed tray 1.  It does not recognize tray 2 printing, but it will let me know when the tiroir2 is missing.  No idea what this could be or how to fix it?

  Any help would be greatly appreciated.

  Toni

  If you print a configuration page using Tray 1, then you can look and see what paper size and type it thinks are in tray 2.

  You will see probably is one of these elements is bad and most likely it is misdetecting the size of the paper due to a failure of the Board of Directors that detects the position of the fingers on the side of the status bar.

  I think you have probably found a message on the screen that says load paper in Tray 1 whenever you try to print from tray 2, if this is the case it should also allow you to hit the go button and print using any type of paper or the size it considers is in tray 2.

• Office Pro 476dw - don't print from Tray 1

  Hello!

  I recently bought a 476dw Office Pro, and it will print from Tray 1 when I select an envelope #10 or legal size paper.  I am trying to print labels with a format sheet letter Tray 1.  I chose precisely the paper as "Tray1" Source, but it will not draw labels and printing from tray 2.  Can you please adivse how I can direct the printer to Tray 1?

  Thank you!

  It is a configuration problem simple set tray.  You must make sure that the sending application fits on the correct document settings work before it hits the printer.  Once the printer receives the job he will review the parameters type and format of the document as well as the tray configurations it has available.  At that point, he will decide to print on a platter or another or ask the user to perform an action so that it can continue.

  Try to print a sample of work such as work from another application.  If the same problem happens then there is a mismatch of the status bar on the printer.  If the problem does not recur from a different application there is a configuration problem on the initial application, which must be found and corrected.

• Fax printing from tray 2

  I added my 8600 Pro Officejet tray 2. I have #10 envelopes in tray one and paper in tray 2. I can get it to print in all modes except the incoming faxes and he tries to print from Tray 1. I have the default to tray #2, I tray locked 1, in printing preference selections in the printer, I chose a tray 2, but this option is not available in the fax printing preferences. I tried to remove and reinstall tray and driver, I tried to download the latest driver from HP to no cure to my problem. Help, please!

  Hello ambulance,

  Welcome to the HP Forums.

  If you use something else than standard paper in tray 2, the default printer in Tray 1 for fax.  If you try to use the legal size in the second tray, this will also cause the issue.

  Please remove the paper from Tray 1 just enough so that it is not recognized by sensors in the printer. This will test the printer to make sure it will default to try the 2.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

• The model HP LaserJet 2430 Q5964A only print from the manual feeder

  The LaserJet printer will no print (Tray 1) manual feeding.  We need the printer to print only starting from tray 2.  I tried to change the settings to the local node as a server-side.  I tried to make the Tray 1 not available both client-side and server without result.  Regardless of what I select settings, the printer will always say, ' manually feeding heavy extra paper.  I do not use a card stock.  I use a brand line 2 MACO of 10 very similar to Avery label sheets.  How can I get the printer to pass the Tray 1 and only draw starting from tray 2.

  Please, do not provide generic answers to change the size and type of paper.  I did this several times.

  Currently, tray 1 is A4 size, and the Type of tray 1 is labels.  I also settheis to envelope #10.  No matter what is put here the printer insists on the use of Tray1.

  Tray 2 has currently the size value LETTER.  Default paper size is set to letter.

  

  Without the help of HP, on mine I found a solution.

  1 remove the printer from the server

  2. go to the computer of each user who uses the said printer and remove it form the devices and printers

  3. return to the server and add a printer again (used PCL 6) since August 2013 instead of new

  4. replace in the computers of users and add the printer again.

  5 test printing.  It worked correctly in my situation.

• HP Photosmart 7525: printer constantly lose wireless connectivity

  I can't keep the connectivity on my HP Photosmart 7525. It worked fine for over a year, no change to my wireless network, all drivers updated on the printer. Help! What should I do next to fix this?

  Hi simiburtons,

  I'm glad to hear that you found a way to solve your problem. Feel free to visit the HP Support forum again if there are any issues that need attention.

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.

• HP Officejet Pro 8600: Printing from tray 2 Hp8600

  I recently bought a 3 microsoft surface, and for some reason when I go to print I can no longer select tray 2, happens with tray 1. I have tried a number of things, looked at preferences and even followed the steps in this post http://h30434.www3.hp.com/t5/Printer-Software-and-Drivers/Easy-selection-printing-to-tray-1-or-2/td-... all the way to step 33, but the paper/quality tab is not either.

  Can anyone help?

  Hi danjambal,

  Thank you for your answer!

  The steps for Windows 8 will run on Windows 10. Please, try the following:

  1. Right click or touch and hold the bottom left of the screen to open the menu. In the menu, click or tap on the Control Panel, then click on or type printers and display devices.

  2. Right click or tap and hold the icon of the printer () for your printer, and then click or tap Print Preferences.

  3. In the Printing Preferences menu, select paper/quality.

  4. In the paper Source drop-down list, select tray 2.

  5. In the paper size drop-down list, select the size of paper suitable for the print job.

  6. Click or click on apply, and then click or tap on OK.

     NOTE:

     Follow these same steps for the default print tray back to Tray 1.

  If these steps do not work, there could be a nuisance pilot. Please try our HP print and Scan Doctorand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this post is helpful!

• Photosmart 5520-printing from browser job queued sticks

  Running Windows 7 32 bit home edition and I am trying to print 9 Explorered Internet consistatnly.

  Since the purchase and installation of the 5520 printer, I've been running the questions where the jobs are in a print status in the queue but nothing comes out of the printer.  The printer is configured to print from WiFi and happens on all 3 of my computers.  I need to remove the task from the queue and then stop and restart the spooler before work service removes it from the queue.  I can print from Word, Excel and other applications, but when printing from the browser it happens at least once a day.  I would say that if a website has a button "print" the problem does not occur, but when you select just print in the menu of the browser, it happens more often.

  It becomes very annoying and would like this to be resolved.  This never happened with my Canon Pixma printer that has replaced this printer.  I ran the HP printer diagostics and there no question.

  The problem is caused by a conflict pilot between IE 9 and the print driver. The solution is to uninstall IE 9 and use IE 8. Normally, this solves the problem. If this isn't something you want to do, there are other options. First of all, you can try using another web browser. I'll include links to Firefox and Chrome downloads. Another of the options, is that you can try to use a different printer driver. I would add as well the instructions below. Hope that helps.

  Firefox:
  http://goo.GL/7ICv2

  Chrome:
  http://goo.GL/MAqrN

  To use a different print driver for printers HP with Windows 7:
  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. Select printer properties.
  5. click on the Advanced tab.
  6. click on new driver.
  7. click on next.
  8. Select HP in the first list.
  9. Select Deskjet 450 in the second.
  10. click Next.
  11. click on finish.
  12. click on apply.
  13. click OK to close the window.

• Photosmart 7525: printing preferences

  How can I choose to print only 1 of several pages?

  Hello

  I'm running around now from room to room to test all my laptops (including my wife of less than 1 year HP Envy 15) to recreate your screen, but I can't - I can't get (under Internet Explorer, even on Firefox)

  

  Kind regards.

• Who hide or minimize the applications on the touch screen for HP Photosmart 7525 printer?

  Although I might decide to use the apps I prefer not to look at whenever I print.  Is there a way to reduce or damp them?  They appeared after I pressed the calendar button during installation.  If I knew what would happen then, I would have avoided this button.  I know how to remove them completely.  This could be the final step.  Thank you

  Hi gdwalker100,

  I understand that you want to delete apps from your printer.  I regret that applications cannot be completely removed from the front of your printer.

• Photosmart 7525: Printer cartridges

  I bought a set according to market my local bestbuy printer cartridges and it seems that for some reason any, my printer does not print text documents, I went to costco and bought a new set of cartridges hp every 5 and I was wondering if it was possible save the ones I bought from bestbuy may try again at a later date like throwing $ 50 is not a way I want to start it seems to print photos fine but the text documents I get black spots on a single page and a second blank page so I want to try a different set of ink and see if that fixes anything

  I would stay on the cartridges, but it seems that I've lost the receipt and I just bought HP new ones and they work great... Maybe it was an empty photo cartridge that was the guilty al along

• Photosmart 7525 Printer Wizard does not work with Windows 8 Pro

  Just installed the 7525, networking and it. Print, fax, etc very well, but when I click on the Printer Wizard, Notepad will open with two separate screens, HPSPProgress.hta, and HPSolutionsPortal.hta with many sequences of text I do not understand.

  I have a Toshiba Satellite P755-S5278 upgrade Windows 7 to Windows 8 Pro.  I know he kept Windows 7. However, 8 is here so is there a solution?

  Thank you

  Hello

  Use the hotfix or follow the steps listed below, if the program the error described resolution:

  http://support.HP.com/us-en/document/c03640384

  Shlomi

• HP LaserJet 9050 noise to print from tray 2 and 3

  
  

  Yes, certainly, sounds like a problem with the paper entry unit.

  http://www.printertechs.com/shop/HP-LaserJet-8100-8150-paper-input-unit-refurbished-RG5-4334

• HP Photosmart 7525: Unwanted printing from the internet Hp Photosmart 7525

  Twice a day my Photosmart 7525 prints 'crap' on its 'own which is useless to me.  It's wasting my ink.  How can I stop this non-asked-for printing?

  Hello

  This is most probably a delivery Prinable calendar you wrogly registered in the applications menu.

  A printable should have his name indicated at the bottom of the printed page.

  Spend management scheduled delivery pads > management to the statements of expected delivery section below and follow the steps in your region disable printing and remove the printable:

  http://support.HP.com/us-en/document/c03614219

  Shlomi

• Printers HP 8630 (all-in-one): ON HP 8630 is there a quick way to print from the paper locked tray (using a Mac)?

  ON theHP is 8630 printer a quick way to print from the paper locked tray (using a Mac)?  I normally print from tray 2 and special letterhead in a status bar.  It would be nice to choose letterhead in Tray 1 at time of printing without having to reset the printer manually.  Is there a way?   Jim1949

  Hi @James1949,

  The application, click file and then click on print.