HP Photosmart 7760 was working fine but suddenly will not print

Similar Questions

• I have a hp netbook and it turns on and works fine, but it will not charge?

  My netbook was purchased in November, worked perfectly, then the other day I was using it and noticed a low battery. I plugged it in and it would not charge. Thinking it's maybe taken, I moved around, but nothing helped. Is there a reason that this is happening? A short, perhapse? Or should I try to buy a new power cord? Or should I just send it back with my one year warranty? Thanks in advance!

  Lauren

  I was thinking more in terms of a defective battery. If it turns on and works but the battery won't charge, the most likely thing is the battery. On netbooks, I believe that the battery is covered for one year, but you will have to pay the shipping to get help from the warranty on a netbook. I don't know if they will send just a spare battery and allow you to return the defective one (possibly). The catch-22 is that you don't know if the battery is bad until you try a new.

• Hi guys, can someone help. my e-mail was working fine, but suddenly, I can receive but not send error like below. Any ideas. Thank you

  The message could not be sent because the server rejected the sender's e-mail address. E-mail address of the sender was * address email is removed from the privacy *'. Subject 'test', account: * e-mail address is removed from the privacy *', server: 'smtp.ntlworld.com', Protocol: SMTP, server response: 555 denied (the Mail From external address). Please enable authentication SMTP send mail.', Port: 25, secure (SSL): no, Server error: 555, error number: 0x800CCC78

  If you use OE, then go to tools | Accounts | Mail | Properties | Server and check the box at the bottom that says that the output server requires authentication.  If this does not work, then you must contact your ISP to find out the correct settings for OE.

  Steve

• I D:\My Documents in my office. It was working fine but all of a sudden I said access denied. How can I solve this problem.

  I D:\My Documents in my office. It was working fine but all of a sudden I said access denied. If restore system 2 or 3 days before this date my document becomes available. How can I solve this problem. I have a user and admin in this system. But the user has the power to admin. I use Windows XP.

  Hello

  · Were there any changes made on the computer before the show?

  · Who is the service pack installed?

  Follow the steps from the link below when you receive the error and check to see if this helps: how is ownership of a file or folder in Windows XP: http://support.microsoft.com/kb/308421

• Photosmart B109a-m printer suddenly will not print.

  My Photosmart B109a-m printer suddenly will not print. It worked last night and no connections or settings have been affected since then.  It will not print the test page and the printer Utulity advises that means a problem with the printer, not the computer.  The computer shows it sends data to the printer and indicates that it is printing but nothing happens with the printer.  Any ideas how can I fix?  I'm on an iMac with Lion.

  How is the printer connected?

  Try to reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Photosmart 130 for windows 7, had to install a new driver, now its photosmart 330. I followed the instructions but it will not print an image of the computer.

  Photosmart 130 for windows 7, had to install a new driver, now its photosmart 330. I followed the instructions but it will not print an image of the computer.

  There is no Windows 7 driver for your printer, BUT...

  HP provide instructions that should get your printer working at least... follow them to the letter...

  BTW, the printer MUST be connected through a USB cable...

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01796821&LC=en&DLC=en&cc=us&product=75939&lang=en Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• I use PS extended 6. It works well, but it will not be updated. I'll take a notice in my application creative cloud he has an update waiting. I'll click on the UPDATE button and it works 100% and then give me a update failure message.

  I use PS extended 6. It works well, but it will not be updated. I'll take a notice in my application creative cloud he has an update waiting. I'll click on the UPDATE button and it works 100% and then give me a update failure message.

  I fixed the old-fashioned way. Uninstall - reinstall. Works fine now.

• Pro9 Acrobat on Mac suddenly will not print pdf unless I put it on the Image to print.  Downloaded drivers for printer Canon updated and rebooted - same problem.  Problem appeared after update of Adobe, but not sure we - in the last 45 days.

  Acrobat 9 pro, suddenly will not print pdf except for the print image.  Begun in the last 45 days after the update from Adobe.  Have installed drivers for Canon updated and rebooted, but no change.

  If you look at system requirements for Acrobat 9 for Mac, you will see that it is only compatible with Mac OS X v. 10.4.11 or 10.5.

• my Windows xp pro computer was working fine, but after five days, when I stat from my computer I could show only the information of the bios on the screen and then the screen freezes

  my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• Vista Home Prem64 runs just older games (compatible XP) fine and suddenly will not work the games and id is 'a problem' without code or soln.

  I have a newish Vista Home Premium 64 NB and HAD no problem playing games, I played on my DT Pro XP until a few weeks ago. Now, when I go to open games, windows tells me that "there is a problem and needs to close the game" and "If a solution can be" it will inform me! Using compatibility, updated drivers, uninstalling and reinstalling have not worked. I do not understand why they worked very well and now they do not? Anyone have any ideas? It looks like my Direct X? changed to 32 bits, for some reason any-is it a problem? The Direct X is 64-bit? I also notice that it is very skittish about some other applications that I try to DL as well now - IE Puran Defrag. Thank you

  Hello
   
  Welcome to the Microsoft Windows Vista newsgroups!

  Try the following steps:
   
  Step 1:
   
  Select the game in the State of clean boot and check.

  Try to perform a clean boot. Follow the steps below:
  1. sign the computer by using an account with administrator rights.
  2. click on start, type msconfig.exe in the box start search and then press ENTER to start the System Configuration Utility.If you are prompted for an administrator password or for confirmation, type your password or click on continue.
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  5. click OK and then click on restart.
  6. try to play games and check.

  See the link below for more details:
   
  http://support.Microsoft.com/kb/929135

  Step 2:
   
  Try to restore your computer to a time where it was working fine.

  It uses system restore to return your system files and settings to an earlier point in time, without affecting personal files, the restore points.
   
  For more information such as how to perform a system restore, you can follow the link below:

  http://windowshelp.Microsoft.com/Windows/en-us/help/517d3b8e-3379-46C1-B479-05b30d6fb3f01033.mspx#EI

  Step 3:

  Try to reduce the hardware acceleration on your computer and check.

  To reduce the hardware acceleration on your computer, perform the following steps:

  Click Start in the lower left corner of Windows Vista.

  Click Control Panel, click appearance and personalization, click personalization, click display settings and then click Advanced settings.

  Click the Troubleshooting tab, and then click on change settings.

  Note: The settings will be disabled if the graphics card driver does not support disabling hardware acceleration.

  Move the hardware acceleration slider to reduce it. It is the basis of acceleration.

  Kind regards

  Savan - Microsoft technical support.

• HP TouchSmart 4600 was printing find, but now will not print from Adobe

  I was printing fine, but all of a sudden when I try to print a form in Adobe format, it will not be printed.  First I get a dialog showing progress, then a 2nd box 'Print to file' output file name must be filled in, but it does not print the page.  ?????

  Hi Patricia,

  ·         Did recent changes to the computer?

  ·         Are you able to print from other applications?

  In the meantime you can check out the article below:

  Resolve PDF printing problems. Acrobat, Reader products affected

  http://kb2.Adobe.com/CPS/873/cpsid_87346.html

  I hope this helps.

• I have a hp photosmart C6380 all-in-one and it will not print

  PRINTER

  I have a hp photosmart C6380 all-in-one and it will not be printed. Saids it is disabled in case of problems and it is not off! Tried to turn it off, then comes back on but still saids its judgment. What should do?

  Hello

  Make sure that your print spooler service is started.

  At this point, on your computer, check the status of the print spooler service. Restart the print spooler services.

  a. Click Start, type services.msc and press ENTER.
  b. scroll down to print spooler.
  c. start the print spooler service.

• HP ENVY 5530: PRINTER SUDDENLY WILL NOT PRINT PHOTOS,.

  • MY PRINTER HAS PRINTED PHOTOS ALL THE TIME, BUT SUDDENLY HE STOPPED, I CHECKED WITH THE DOCTOR HP PHOTO AND SCAN AND PRINT TEST PAGE COMES OUT PERFECTLY, ACTUALLY I JUST PRINTED A PHOTO OF 8/10 AND PRESS A POCKET FORMAT THOSE AND HE SAYS IT OF PRINTING TO THE SCREEN BUT NOTHING DOESN'T I TRIED ANOTHER PHOTO OF 8/10 AND NOTHING DON'T GO OUT, I THEN PRINTED A RECIPE AND IT CAME OUT PERFECTLY AND THE IMAGE OF THE RECIPE ON THE COVER PAGE, WHAT CAN I DO?

  Hi @TRICIAPAT,

  Thank you for joining the HP Forums!

  I noticed your post on how your 5530 Envy of HP will not print photos. I'm happy to help you!

  If please try the instructions in this guide, Print Photos (Windows)and let me know what happens!

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this guide to solve your problem!

• Firefox is no longer load any website on my iMac Yosemite 10.10.5 running upward. It was working fine but now it does nothing but show the circle of rotation.

  Help! One day he was working, and the next day he was not. No update, nothing. I deleted and then got a new copy of Mozilla, but it did not.
  All I get is the circle of rotation; no load Web sites.

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

• exp works fine but expdp does not work... !!!

  Well, I used exp to export my database on 10g and it works absolutely fine but when I use expdp with the respective syntax I get this error
  
  ORA-39002: invalid Operation
  ORA-39070: unable to open the log file
  ORA-29283: invalid file Operation
  ORA-06512: AT SYS. UTL_FILE 475 line
  ORA-29283: invalid file Operation
  
  Published by: Chase Suhail on July 31, 2010 03:55

  Create a directory named expdp_dir located in the D:\oracle\product\10.2.0\db_1 enter the following sql statement:

  SQL > create directory expdp_dir as 'D:\oracle\product\10.2.0\db_1 ';

  Then grant read and write permissions for the users who will perform the data pump export and import.

  SQL > grant read, write on directory expdp_dir to the system, User1, User2, user3.

  How to export complete
  A full export is specified with the COMPLETE parameter. A database export is complete, the entire database is unloaded. This mode requires the role of permission. Example:

  expdp system $ / DIRECTORY = expdp_dir COMPLETE DUMPFILE = expfull.dmp = y LOGFILE = expfull.og

  Schema export mode
  The schema export mode is called using the SCHEMAS. If you don't have any role permission, you can export your own schema. If you have the role of the permission, you can export several patterns at once. You can optionally include the system privilege grants as well.

  $ expdp HR/hr DIRECTORY = expdp_dir DUMPFILE = schema_exp.dmp SCHEMAS = HR, sh, oe

  How to export table
  This export mode is specified using the parameter TABLES. In this mode, only the specified tables, partitions and their dependents are exported. If you do not have the role of the permission, you can only export tables in your schema. You can specify only the tables in the same schema.

  $ expdp HR/hr DIRECTORY = expdp_dir DUMPFILE = tables_exp.dmp TABLES = employees, jobs, services