I have a hp photosmart C6380 all-in-one and it will not print

PRINTER

I have a hp photosmart C6380 all-in-one and it will not be printed. Saids it is disabled in case of problems and it is not off! Tried to turn it off, then comes back on but still saids its judgment. What should do?

Hello

Make sure that your print spooler service is started.

At this point, on your computer, check the status of the print spooler service. Restart the print spooler services.

a. Click Start, type services.msc and press ENTER.
b. scroll down to print spooler.
c. start the print spooler service.

Tags: Windows

Similar Questions

  • I have a hp photosmart c7250 all-in-one wireless radio does not work

    I have a HP Photosmart C7250 all-in-one and the Wireless does not work.  When I try to go through the wireless configuration wizard, the test report shows the following - 'the wireless radio does not work.  Contact HP support.  Can you help me?

    We will reset the printer.  Turn the power off, hold it # and 6 keys all on again.  Go to Configuration > network > wireless network Test later to see if it worked.

  • I have a hp photosmart 2575 all-in-one and I got a new computer and I can find my cd how to load

    I have a hp 2575 all-in-one and I got a new computer and I can't find my cd so how can I down load to new computer

    Hi bdworley79,

    Click on the link below and select the operating system on your new computer to download the drivers.

    Downloads of software & driver - HP Photosmart 2575 All - in - One Printer

  • Photosmart c4280 all-in-one and Maverics no color printing

    My photosmart c4280 worked for me like a champ for years, that is until what I plugged my new macbook pro with OS 10.9.3 Mavericks. Now the printer will not print in color. I know that he peut still print in color because I copy/print a document in color that I had and it worked fine.  I have ASUs available and, as far as I know, have downloaded the correct driver.

    Any help out there?

    Thank you

    Hi 6pick! Welcome to the forums

    I noticed your post on your Photosmart C4280 is no longer printing in color and would like to make a suggestion to you that might help!

    Try:

    Mac OS X: how to reset the printing system

    Add the printer again and make sure that you add the HP print driver and not the driver AirPrint

    I hope this works!

  • scanner doesn't work now on an hp photosmart c7180 all in one solution Center will not come on i', running on vista

    My scanner used to work on my vista machine, now it does not work. When you try to open the center of solutions for my photosmart c7180 all in one i get an unrecognized message just after a momentary flash of the starting solution Center screen.

    Hello

    What is the complete error message you get?

    Follow the steps below and check if that helps.

    Method 1: Troubleshoot scanning.

    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-scanning-problems

    Method 2: I suggest you install drivers for HP photosmart c7180 all in one manually from the manufacturer's Web site.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=1153754&

    See also: messages of error & lights.

    http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=2697&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=1153754

  • HP photosmart 5515 all-in-one: HP5515 all-in-one black ink will not print

    I'm having the same problem that other messages that I have seen posted - my black ink will not print

    Help!

    You can try to unlock the black cartridge using a cotton swab soaked in hot water.

    Turn the printer off by removing the power cable.

    Remove the black cartridge & you we see a wire mesh DAB gently with the Q-Tip.

    A cleanup operation between attempts.

  • Photosmart C6380 all-in-One: Photo ink instead of printing ink (Dutch HP)

    My printer keeps using ink photo instead of the printer ink, but it seems to me impossible to change. I found a solution somewhere on the forum to check the box "use black ink only" in preferences > advanced > grey but it is not this option in the Dutch version...

    I have already tried several things: cleaning the printerheads, handed over to defaultsettings, try changing preferences with the HP ePrint, printermaintanence of the printingheads and cartridge, etc...

    Please help me to be able to use my printer.

    Welcome to the HP community @IrisvdL,

    I stumbled on your post about how you cannot select this option to print in "black ink only" when you try to change the settings of the printer for you Photosmart C6380 and I wanted to answer. Although I'm not familiar with the Dutch language, I suggest you make sure you download and install the full feature software and driver on your computer to have access to all the options of the printer.

    Click on this link to download the driver and software: series all-in-one printer, HP Photosmart C6300/6324 full feature software and driver

    If that does not give you the option of selecting black ink only, then I would recommend contacting HP directly to see if a technical support representative can connect remotely to your computer to help others.

    Testify of my answer by hitting the thumbs below and press the button "Accept as Solution" if I helped you reach a solution!

    I hope this helps you!

    Contact HP:

    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number appear

  • HP Photosmart all-in - one a 309 will not print from the main computer in network

    PULLING MY HAIR OUT and have spent endless hours trying to figure this one already, so any advice will be appreciated! This 'deal' of a printer had problems in time over the 18 months or so I got it, but this one takes the cake. My HP Pavilion 6140, Windows 7, 64-bit, isn't wireless, but is connected to a router. My 309 a is wireless, but is in the same room near my computer and is recognized on the network. My husband's computer is sitting across from home in his office and can print wireless from my printer. Sitting here beside him, I can't print anything. We were able to print test pages from it to my computer, but if I go to another file of any type of printing, the printer does nothing. We have uninstalled, reinstalled, tried drivers d/l. He tells us that we need a driver, but when we go to d/l, it says no driver needed, or your drivers are up to date. My crazy husband DID with the router last weekend, on the moment cela everything has started, but since he checked it out, and everything seems fine. Copy the scanner work very well, so printing them isn't a problem either. I can save a file from my computer to the network, run in there and shoot to the top of this file and send it to my printer to print. No problem.  So, can anyone please give me any suggestions as to why my computer is unable to send anything to the printer or the printer does not recognize. Control Panel says it all works well, and the printer is ready. If I go into the properties of the computer, it says "drivers for this device are not installed, code 28. We had other messages of error as well in recent days, but nothing has been solved little matter what we do. Also MY computer doesn't list MY printer in the choice IF I try to print, and it says "printer unknown error has occurred."

    HardBeatZ, I wanted to just say a last thank you for all your help with my computer/printer problems. I hope I won't need this forum in the near future, because once again, I had to choose a different password. Yikes! In any case, we've been on all the roller coaster of emotions these past few weeks. Once you and I spread the printer as being the problem, we have debated on buying a new computer or reload Windows. After shopping and comparison of computers and prices see on them, etc., we decided that we had nothing to lose. So we borrowed an external drive and loaded important data and reinstalled Windows. Once we did that, we could still see the printer on the network, and it would still print from her husband's computer, but not mine. However, it DOES not seem to take care of other issues, and the dreaded exclamation point next to the PC icon has disappeared, so I'm gutsy and reinstalled the printer. For some reason, it still does not work wireless from my computer (which he always did), but I plugged the USB cable and returned to printing, scanning and faxing capabilities. so, I hope that all is well now, and except for paying ridiculous shipping for return monitor (still in warranty) which is released before printer problems, we did not have to shell out the $$$ for computer or printer. Monitor is shipped to me right now, so here's hoping that $$ on shipping was not in vain. Now if only we could be repaid in $$$ for the moment, concern and effort we all time put them into this mess. It WAS definitely a learning experience, even if, in the future, that I'll be a lot less worried to the excavation to solve problems. Thanks again for your time and patience.

  • DeskJet 3050 a all-in-one J611 series will not print office with windows 8

    Hello, I'm setting up my office of engaged couples to my HP DESKJET 3050 ALL-IN-ONE J611 a series. It is said that he only supports the other windows, windows 8 not being is not one of them. Two are wireless and I thought that there must be a way to download a software that I can install in order to connect to this computer. Please any help I could get would be appreciated.

    Hi there @tabatha46

    Welcome to the forums

    Yes, the Deskjet 3050 a printer is compatible with Windows 8, and I will share a link below to download the driver and software. If you have any questions, please let me know and I'll do my best to help!

    HP Deskjet full feature software and drivers

    Happy Wednesday

  • I have the HP Photosmart C4500 all-in-one and it stopped scanning to my computer.

    Until 2 weeks ago, it was scanning fine on my computer, but now nothing happens and I get the message 'error analysis. try scan from computer or see the documentation. "Then when I search, it says that the scanner is not initialized. I have to uninstall and reinstall.  Why that would happen.  It prints very well.

    Hello is a process of discovery of device that must be present in a router to allow devices Apple find printers on the network.  A router Aple has obviously, Hello.

    We will begin by restarting the router by pulling on its power supply momentarily plug, then turn on the printer with its power button.  Make sure that the printer is connected to the network by printing a network Test Wireless in the menu on the front of the printer wireless.

  • HP Photosmart C4200 all - in-one series. Does not print because the undetected alignment page.

    Does not print not because Error Message "alignment Page not detected."  Thanks Chaso

    can someone reply to my message number 5, thank you. Chaso.

  • DeskJet 3050 all-in-One J610A series will not print an alignment page

    I have owned this printer for a year and a half and have had little problems with it. When I inserted a new ink cartridge, it wouldn't print an alignment page. The display shows "load plain white paper on tray and press OK", I did. When I pressed OK, it says "printing" but made no sounds and nothing print. I tried the reset of the printer, the printer and the print spooler reset, cleaning, but nothing works. I can print other documents, but he always wonder to print a page of alignment first of all, that it refuses to print. I am at one loss for what else to do. Help?

    My first thought would be to do a firmware update, but there is not an update for this printer.  It is not really a power problem since you are able to print any other documents.

    You could try a reset by unplugging the power cord directly from the back of the printer when the printer is always on, and then disconnect the other end of the power cord.  Wait a minute and plug the power cord directly into a wall socket (not a surge protector or battery backup) and then again in the printer.

    If there is no change, you might take a look at the following links and if you see a step not taken, that give a try.

    Alignment failed

    No more paper

  • Help!... PRINTER LEXMARK ALL-IN-ONE X 5650 WILL NOT PRINT MORE THAN ONE PAGE... Help! (READY TO BURN THIS * @# % ^ THING)

    THIS IS MY PROBLEM... IM RUNNING WINDOWS 7, I AM ABLE TO CONNECT THE PRINTER TO THE COMPUTER WITHOUT PROBLEM. IF I TRY TO PRINT OR COPY ONLY ONE PAGE AT A TIME MOER THE PRINTER WILL RESTART AFTER THE FIRST PAGE HAS FINISHED PRINTING. I ALSO NOTICED THAT THE PRINTER DOESN'T IS NOT DISPLAY INK CORRECT LEVEL ON THE SCREEN OF THE PRINTER, (BLACK INK INK DIRECT 0% 0%) BUT IF I CHECK THE LEVEL THROUGH THE PREFERENCES OF COMPUTER PRINTER IT SHOWS THAT THE BLACK INK IS USED MORE OF THE COLOR INK. (BLACK INK INK 75%-100%). THE QULITY IMPRESSION IS POOR TO MUCH GREEN... ALSO WHEN I CANCEL THE JOB IN THE MIDDEL OF A PRINT JOB IT ALSO RESTARTS. I LAUNCHED A PRINT OF THE COMPUTER TEST PAGE AND IT PRINTS OUT THERE BUT WHEN ITS DONE WITH THE FIRST IMPRESSION AGIN RESTART ANOTHER. AND THE SAME FOR ALL "CARTRIDGES CLEAN CARTRIDGES-ALINGN" THE ONLY THING THAT WORKS WELL IS THE SCANNER... WHEN I PRINT A TEST PAGE TO THE PRINTER, I SEE A MESSAGE 'BAD CHIP HEATING' CAN THIS BE THE CAUSE OF ALL MY PROBLEMS, OTHERWISE THAT MEANS...

    HELP.............................. HELP.................................... HELP.......................

    ......................................... WHERES MY GAS AND A LIGHTER...

    Hi MTCAIME,

    ·         If it works well before? Do you remember any recent software and hardware changes made on your computer?

    1. I even suggest to run the troubleshooter under construction, link, you can refer to the same thing: Open the printer Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Printer-troubleshooter

    2. make sure that the printer spooler is set to automatic, steps to set the service to automatic

    i. click on start and type services.msc in the search box

    II. search for the Printer Spooler service

    III. right-click on the service

    IV. If the service is stopped and then starts the service

    v. Select Properties

    VI. and in startup type, select automatic

    3 uninstall the driver and related software and reinstall it back. To uninstall, see the link below: Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

    Link for the drivers from the Lexmark Web site: http://support.lexmark.com/index?locale=en&productCode=LEXMARK_X5650&userlocale=EN_US&segment=DOWNLOAD&os=WINDOWS_7&page=downloadsList&oslocale=en_US#4

    Thank you, and in what concerns:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Photosmart C6380 all-in-One - printer error message question

    I have a HP Photosmart C6380 all-in-One printer.  It worked well for a number of years, but last year, whenever I want to print something, the orange light blinks and an error message is displayed in the window.  It is said: ' Please Oxc19a0035 turn printer off, then on.  If - before the printer print, I must turn off first and then on again.  It's more boring, to say the least.  Does anyone have a suggestion as to how I can solve this problem?  Thank you, Ms. Dahlia

    The troubleshooting steps described in this document may help to resolve the error.

  • Cannot install HP Photosmart C6380 all-in-One Printer

    Original title: HP Photosmart C6380 all-in-One Printer, it will not be installed in the computer disk or web site

    None of the things I have tried will allow programs to download and when I go to detect does not detect the printer at all so anything that I want to use this for is not good and I about ready to kill hp all to gether

    Hello

    1. who is the operating system installed on the computer?
    2. have you checked if the HP printer is compatible with the version of the operating system that you are using?
    3. do you get an error message when you try to install the driver?
    4. what all troubleshooting have you tried?

    If you use Windows 7, follow these methods.

    Method 1: You can also run the fixit of material.

    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/

    Method 2: in the Windows printer problems

    For more information, see these articles:

    Install a printer
     
    Find and install printer drivers

    Please provide us with more information on question help you also.

Maybe you are looking for