HP Photosmart B110: I can not scan with my photosmart B110

Similar Questions

• I can not scan with my Photosmart 6510 via a wireless connection.

  I recently bought a 6510 Photosmart all-in-one.  I can print without problem.  I could not scan.  I get the message: "unsuccessful Scan, an error occurred during the scan.  Please make sure that your computer is connected to the printer and try again. "I use Windows 7 64-bit.  The printer indicates that it is connected to my home network.  This printer has replaced another HP printer.  I have disabled my firewall but still the error message.  I ran the HP diagnostics for printers and networking with no precise answer.  You can provide any help would be appreciated.

  Hello 30million

  Error 1068 when you try to start a Windows Service indicates a problem with dependencies. The instructions below will explain how to locate dependencies and make sure they are enabled. Depending on your version of windows, you may need less listed dependencies. Let me know if you have other problems.

  Restart the services of dependencies:
  1. Click Start, in the search box type "services" without the quotes.
  2. scroll down until you see Windows Image Acquisition (WIA).
  3. double click on it and go to the Dependencies tab.
  4-2 services must be listed.
  5. close this window and look for the remote procedure call (RPC).
  6. make sure it's on manual or if it is enabled automatically, just leave it. Make sure the service is started.
  7. go to hardware detection kernel and Double click.
  8. set the Startup Type to manual and click on apply.
  9. you should be able to start the service by pressing Start.
  10 now, you are done and the Twain Manager must work and gives you is not a mistake.
   
  Check the dependencies or sous-dependances:
   
  Right-click WIA (Windows Image Acquisition) by selecting the first properties, and then click the Dependencies tab. It should list: remote procedure call and detection material core
   
  Under the CPP he then list Launcher process for the Service DCOM and RPC Endpoint Mapper to go back to the main list services.msc and then right click, will launch all the items listed as dependencies or void dependencies under WIA

• Can now print :-), but still can not scan with USB or wireless

  Hello

  Like many of us, I just upgraded to Windows 8 Pro (64-bit) and discovered during my first attempt to analyze the printer can't find my printer.  I uninstalled the HP software and re-installed using the installer on the HP website. Printing but scanning doesn't always work, fade via the USB cable or wifi.

  I'm quite a common scanner and need someones help with this.

  My printer is a Deskjet 3050 a - all in one.

  Thank you

  Eddie

  Hello, Eddie.

  The software for your Deskjet 3050 a is available:

  • 32-bit: DJ3050A_J611_1315.exe
  • 64-bit: DJ3050A_J611_1315.exe

  Before installing the new software, unplug your all-in-one to your pc.

  If you still have problems, try uninstalling/reinstalling the new software.  The OS upgrades are sometimes tricky.

• Can not scan with windows 8

  Recently installed WIN 8 - followed all directions for using windows fax and scan and challenging HP scan and capture on all-in-one HP J4680. They return all two 'impossible to find the device"type messages. Printer works fine print and is online as a printer default wifi and scanned fine with win 7.

  Hi rigary,

  I want to help you scan from our Windows 8 operating system. Please first start by printing HP and the Scan doctor.

  HP printing and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems. HP recommends that you run the tool every time that you need to solve a problem.

  Printing and scanning doctor diagnoses and resolves common printing, scanning and connectivity problems, including:

• HP 2210 printer all-in-one: after updating WIndows 10, I can print but not scan with my HP 2210 all in one

  I've updated to Windows 10 and since then I can print but not scan with my HP 2210 all-in-one printer.  I tried to download the software updates, but nothing seems to work.  Any suggestions

  Hi @Sajapand @ddegan

  I see that you both scan problems after upgrade to Windows 10, and I may be able to help.

  Most of the products have updated software available on the HP support Web site for Windows 10.

  I also saw a few posts that say Windows 8.1 driver works for Windows 10 as well, then you could try also.

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning problems. I recommend you to download and run the HP print and Scan Doctor , if she doesn't fix it automatically I would know what errors or messages that you receive.

  Do you know if you are able to scan using paint?

  To perform a scan of the painting: HP Multifunction printers - how Scan: Windows 8

  (This is the same for Windows 10, of what I said)

  1. Click the Start button () in the lower left corner of the screen, click on Searchand type Paint.
  2. Click on the painting in the results.
  3. Click fileand then click on from a scanner or camera.
  4. Select your printer, click OK, and then click Scan.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• Photosmart 7520 - can not scan to computer directly

  I have a 7520 new.  And using a Mac OSX 10.8.5.  The printer works perfectly.  When I try to scan, I get a message that there is no commumication with the printer.  I arrived at the printer utilities and the attempt to activate the scan and get the same message.  However, if I go to the web operation shipped it see communication, and if I use the operation of analysis on the web server it scans correctly.  How can I get rid of having to go to the web to analyze and do it in my printer?

  Hello

  I'm sorry to hear you can't scan with your Photosmart 7520 and your Mac OS X 10.8.5. I would like to help. I have studied this problem for you and have found a troubleshooting guide that I'll post for you below to follow.

  I hope this helps!

  Problems of communication during the analysis

  Kind regards

• All-in-one HP Photosmart C6280 not connected to the internet, and can not scan to computer

  My HP Photosmart C6280 all-in-one not connected to the internet, and can not scan to the computer.  I got it for a few years and must plugged into my Macbook to print, but now I want to use it to scan photos directly to my computer.  Can someone help me to do this?  Much appreciated!  (Not sure where are my original softward records!)

  Oh, OK, well this isn't probably the problem, but for good measure, you should get the latest version of the software for your printer from the "support & drivers" link at the top of this page.

  In the meantime, we will reset the printing system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Top of the window, Select the default tab . Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Photosmart 7520 e ALL-IN-ONE: can not scan to e-mail BLAH display panel eprint photosmart 7520 e all-in-one

  my printer can not scan to e-mail to printer display panel in the months ago very well but right now not working it says unable to connect to web services (work wireless) how fix it please help

  How to check it

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• HP Officejet 150: Can not scan wireless

  I have a HP all-in-ONE Officejet 150 and that you are unable to scan wireless.  Right now, I can't even the bluetooth icon to turn blue, although it said that the radio is on.  I took my old printer because of such problems.  I handed to factory, combined with my Sony computer, but it does not recognize my computer.  Suggestions?  I can use a cable and get it to the scan, but that defeats the purpose of bluetooth technology.

  Hi @Dragonbebe,

  Welcome to the HP Forums!

  I understand that you can not scan wireless with your mobile printer HP Officejet 150. I'm happy to discuss this issue for you!

  This printer can only scan with the printer cable USB is plugged. As the wireless Bluetooth connection is strictly to be printed. Please see the user's Guide, for more information your printer.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope that answers your question and have a nice day!

• HP 6500 has more than 4 in 1 machine can not scan wireless in Vista

  I can not scan from my HP 6500 a Plus 4 in 1 machine to my computer wireless wireless running Vista Home premium (64-bit). HP technical support says that the problem is with the function of WIA scan on my computer. Any help would be appreciated

  * original title - can 't scan from my HP 6500 wireless has more than 4 in 1 machine. According to HP, the problem is with the function of WIA scan on computer (Windows Vista). Any information would be appreciated *.

  Hello

  Uninstall and reinstall the HP scan utility and check if this solves the problem.

  You can download it from this link:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=3795406&

• HP envy 5532: can not scan from my hp envy 5532 to my PC.

  message says that the computer is not responding, check the USB and wireless works, both work. As this printer did not come with a USB, I used one of my old lexmark printer. Help I can not scan from printer to pc.

  Hello! Welcome to the forum @scoobby

  I posted a troubleshooting guide for you to try below, for the problem you are having with the scan on your computer. Afterwards, you should be scanning the image!

  An error 'the computer is not responding' for HP ENVY 5530 e-all-in-one HP Deskjet Ink Advantage e-all-in-one 4510 Printer series

  Good luck

• Canon MP250 will not scan with Windows 7. 2,155,2 error code

  Canon MP250 will not scan with Windows 7. 2,155,2 error code

  This Canon MP250 printer/scanner never worked well with Windows 7 and 8 for example. Printing would just hang out and print only the laptop restarts. Scanning has been difficult but eventually worked. Now, the scanner does not at all.

  This is the message that comes with the 2,155,2 Error Code:

  Cannot communicate with the scanner. Cable may be disconnected or scanner may be turned off. Check the status. Scanner driver will be closed.

  They aren't joking about the closing of the scanner driver. I didn't know that the closure would be permanent.

  Also, I get the following message when I plug in the printer:

  USB device not recognized.

  It appears to malfunction. Windows accepts the USB port only when I unplug the power cord of the printer and wait half a minute before plugging new.

  Canon told me I need to download the driver software of its UK site and updated. Fact that several times, also uninstalled and reinstalled the original software and the driver supplied with the disc.

  Software will download, but not install. Guard me with the message: do you want this program to make changes to your computer?

  I tried to install the updated driver manually, because Windows does not find a driver for this printer.

  It drives me crazy, slowly. Can anyone help?

  Sorry for the repetitions of my question. I'm new here and I'll try to find the right forum.

  Instead, please answer your original on the subject (this one) thread.

  It's his original-online http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-will-not-communicate-with-canon-mp250/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81 thread (June 8, 2013)

  @BryanBeeMM => Please post a follow-up while answers to your real in order to avoid even greater confusion original thread => http://answers.microsoft.com/thread/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81

  Thank you.

• To print from the computer, but can not scan from printer to computer. Tried everything. Disconnected power supply, etc, nothing works.

  Have no problem when you print a document from the computer. Can not scan from printer to computer. I don't know that I've scanned because I went from windows 7 to 10. Printer not repeat myself found computer.

  Hi, Rolland,.

  Welcome to the Microsoft community. I might help you.

  To better understand the issue, I would need more information on your side.

  1. What is the brand and model of the scanner?

  2. Do you get any error messages? If Yes, what is the full error message?

  This problem might have occurred because of these reasons:

  1. Corrupted driver.

  2. Hardware problem.

  Method 1:
  I suggest you to run hardware store and check if it helps.

  (a) press the Windows keyboard.

  (b) Troubleshooting type in the search box and press enter.
  (c) click on material and audio.

  (d) click on hardware and devices and follow the on-screen instructions.

  Method 2:
  If the problem persists, I suggest you to download and install the latest scanner driver\software on the manufacturer's Web site.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you more.

• I'm using Firefox Portable and lack the 'Extra' _Menue been updated to Version 11. And "No, I can not add with the toolbar customization."

  I am using Firefox Portable and lack the menu "Extra"since updated to Version 11. And "No, I can not add with the toolbar customization."

  What is this extra menu?

  In some languages of the menu Tools is called Extra, so you can watch in this menu to see if you can find what you are looking for.