HP Photosmart C3140

Just got this Photosmart C3140from a friend. I downloaded the product software & drivers for Windows 7.  The two cartrideges are inside, but when I try a test print I get nothing on paper. Through the movement, but nothing is displayed. I took the cartridges and replace the again, but no alignment page will print or go even in the movement when I do. Troubleshooting says my ink level is low. I bought a 94 black cartridge, but when I inserted, he says that it is not compatible? How is that? Site HP says it should work.

Should I replace both cartridges 92 & 93 to work or is there another problem?

Thanks, but I discovered that I had to only replace both cartridges.  I'm a little worried that HP online said

the HP Photosmart C3140 may take the 94 cartridge, but mine said it was incompatible.  Fortunately, Wal-Mart

Let me repeat.

Tags: HP Printers

Similar Questions

  • All-in-one HP Photosmart C3140: pension / Reset C3140 all-in-one for gift

    Hi all

    I'm retiring my all-in-one HP Photosmart C3140 printer/scanner. Is there a way to reset it completely, reformat or erase all the settings and memory on the machine, especially all preliminary scans?

    I scanned documents with the bank details, social security numbers, etc. on the device, and want to be sure, that it is perfectly clean before giving. (That, or I guess I'll take a hammer to the old fashioned way!)

    Thanks for your advice.

    More complex? I guess that not on this printer. That's what the textbook says.

  • HP Photosmart C3140: error constant "paperless."

    Hello.  Recently, I had a few problems of "transport jam" on my printer Photosmart C3140.  It seemed a lot of old ink had accumulated internally, so I disassembled the printer and cleaned as much ink as I could.  After reassembling, the problem of transport occurs jam is more.  However, when I tried to print a test page, the fire ' load paper ' came.  I put my usual diet of paper on the tray of food and tried to print again, but it's the same thing.  It seems that the printer detects not the paper that is in the status bar.  Any suggestions on what I should look for?  Your comments would be greatly appreciated.  Thank you!

    I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

    If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions

  • Error "Scanner could not be undertaken. Scanner not found. "on HP Photosmart C3140

    Everything worked fine until I updated to Snow Leopard 10.6.2 (apparently... I can't think of anything that went wrong) and now when I try to scan using the software of my MacBook HP Device Manager, I got this error message. Printer and copier functions work fine. Help!

    Printer: HP Photosmart C3140 all in one.

    In 10.6 you do not use the HP software to scan, use Preview or Capture of Image.  Search for your printer on the left column, select it and go from there.

    If this does not work, there are other things we can do.

  • HP Photosmart C3140 All in One - printer, Scanner & Copier

    I really need help! I've been on this site since yesterday just trying to post my question. I'd appreciate any assistance really. I have Windows XP 2007 - HP Photosmart C3140 all in one. Everything worked fine until I installed a new router - Linksys router Cicso Wireless-N-Home. My roommate has a wireless computer, not a laptop. He installed the router - my printer goes through the motions as if it will print even if nothing prints. I tried to locate the my HP Photosmart C3140 all in one on my computer is not listed. My old printer that I use to have installed HP Photosmart C3100 series Advanced Document list my computer. There are at least 5 items listed in printing (QC) how can I get my C3140 reinstalled? It's so frustrating. I really want to hire a geek to fix. With instructions step by step I hope that you can provide, I am confident, I can do it myself. Sorry for TMI (too much info)

    Sindi pebbles

    Thank you!!!

    [email protected]

    Sindi

    What is a PCU?  The printer is connected directly to your computer via the USB port?

  • Photosmart C3140: Don't scan after update to the Mavericks on Mac

    After updating my Mac to the Mavericks, now my printer not scan.  It will print, however. But when I try to scan, I get this error message:

    Cannot perform the analysis because another program has control of the HP imaging device. Try the following steps: start the program again. Close all programs that might be using the device. Restart the computer.

    I did everything above. I have also turned off the printer and unplugged for a few minutes. I rebooted several times. Thanks for any help you can offer!

    Hello

    Thanks for your help. I have a successful solution of Apple that I wanted to share with other people who may have this problem - it involves an impression through the preferences system, a bit bulky but not too expensive:

    Go to system preferences

    Printers, Scanners &

    Choose Scan from Print/Scan above the name of the printer

    Open scanner

    In the dialog box that appears:

    Make sure that "scan to" say where you want to be saved, otherwise you can not know where TI saved.

    Press Scan.

    (If the dialog box opens to the top immediately, please be patient.)

  • Photosmart C3140: (Photosmart C3140) HP Solution Center does not work on my system after upgrading windows8.1

    When I try to launch the HP Solution Center, get the error like - "HP Solution Center cannot work because your device installation is not complete. Please connect the USB cable or re-run the Setup program from the installation to a network installation CD. "If it does not complete the installation, or you do not have the CD, access the HP help files by clicking on the Start Menu.

    HP Solution Center worked very well with Windows8. Windows updates updated Windows8.1 and Solution Center stopped Frank.

    Any suggestions to fix this? What is the Windows8.1 question upgraded or because of something else?

    Appreciate any help.

    Hello PradhanAK,

    You may need to uninstall the existing printing software.

    Restart the PC.

    Please, download and run the Installer printer HP www.hp.com/go/tools

  • Photosmart C3140 all-in-One - loot, additional page RSS

    Printer works well for years.  Then recently, he started (often, not always) feeding an additional sheet completed a work, thoughtfully spoil the sheet by printing one or more mysterious figures in his corner.

    I downloaded and installed the fresh drivers (or at least dragged the bundle downloadded in my folder of the applications in accordance with the instructions, so I guess it is installed).  Did not help.

    Nothing appears wrong when I peer into the printer.

    Only seems to happen if I remove and squares up to the supply of paper each time before printing a page.

    Can we do anything to solve this problem... the ability to an old fart?

    I have a MacBook Pro with OSX 10.7.5

    Thank you!

    Patch installed.  Problem was intermittent.   I'll go after that experience.

  • HP Solution Center crashes on scan

    I want to use the HP Solution Center to scan so that I can scan multiple pages into a single file.  I recently got a new computer with Windows 7; on my old computer with XP, I could use the windows scanner to achieve this functionality (windows 7 scanner works but will only scan simple pages).

    I have a hp photosmart C3140 with windows 7.  The printer thought it was paper for a long time, so I don't know if the printing software works.  I use it as a scanner.

    After getting my new computer, I downloaded the version of the recommended on the site of hp Solution Center.  It has problem in figure 3 shows http://support.hp.com/us-en/document/c01928924 'you can't cancel scanning the computer.

    Y at - there no fix for this in order to use the solution Center and not to scan one page per file in the windows scanner?

    Uninstall the software and drivers for the printer and then re-install.

  • C3100 printer windows 7

    where can I get the printer driver for the printer C3100 so it does not work with windows 7

    Hi LFritz,

    What printer model C3100 do you have?

    Select the model from the list below and click Download software and driver.

    HP Photosmart C3100 all-in-One Printer series
    » Range of all-in-one printers, HP Photosmart C3125
    » Range of all-in-one printers, HP Photosmart C3135
    » Range of all-in-one printers, HP Photosmart C3140
    » Range of all-in-one printers, HP Photosmart C3150
    » All-in-one printer, HP Photosmart C3180 range
    » Range of all-in-one printers, HP Photosmart C3183
  • Why my printer to its good installation used series c3140

    Why used my install photosmart with correct serial number? He said a c3100 when it's an error c3140

    Hello

    C3100 is a series of many printers, can be of C3100 C3199 and your printer C3140 is one of them. HP can produce C31xxaa and so on, that can be thousands of models that have the SAME root/series.

    Kind regards.

  • HP Photosmart C7280 Scanner not detected since Mac OS installed Sierra

    Hello

    I installed Mac OS sierra

    Since then, my HP Photosmart C7280 scanner is not longer detected:

    • In the system preferences tab scan
    • Image transfer can not find any device

    I reinstalled the device

    Print shops

    Scanner is connected to the router (Hello) by Eternet

    Scanner still works when you use a Windows 10

    MacBook Pro (retina, 13 inches, end 2012)

    macOS Sierra Version 10.12 (French)

    Here is a link to the HP support pages, please read carefully including the FAQ, there is a link to the HP scanning utility.

    Drivers for HP printers and scanners are downloaded on the App Store, have checked whether there are updates for your HP product.

    What OS did you go to?

  • HP Photosmart C8100 upgrade to Mac OS Sierra Scanner no longer works.

    After that, I'm going to macOS Sierra my HP Photosmart C8100 Scanner no longer works.

    I had try HP they don't site any upgrade in the Sierra. I get my scanner to work.

    I do not have this as a new printer/scanner each time new software upgrade of the Mac computer.

    It sounds like Hello multifunction.

    Have you tried to install the HP drivers, reboot, then delete and add the printer again?

  • 29 Firefox won't print on my laserjet1020 and printers hp photosmart c4780

    In previous versions of Firefox, print with my HP Photosmart c4780 and Laser Jet 1020 worked well. Now, all that happens is the flow of the page. The pages are blank.

    Hi k9ahl,

    Can you explain if this happens with all pages or only PDF files open with Firefox 29,0? If it's from PDF files, I have been informed that this a bug that will be fixed by an update published Friday morning time Pacific.

    I hope this helps.

    Best regards.

    Kosai

  • Photosmart 7520: News on the firmware updated

    Hello

    I was talking to HP support problems with the latest firmware pushed for the 7520 breach ePrint and network services and they told me that there is an updated release due to be released for download via the software / support site, I was wondering when the new firmware is supposed to be available?

    Matt

    Hello

    A new firmware to restore the ePrint feature are available on hp.com, however it is currently available for MS Windows :

    http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5199462/swItemId/OJ-113641-5

    I don't know if / when it wil become available for Mac OS, that's why I suggest you get a Windows PC and update of the printer, if you can have such an or can borrow a laptop to a member, family, etc.

    If you need to use another PC, remember to install the printer drivers first prioor runs the update:

    http://ftp.HP.com/pub/softlib/software12/COL43773/MP-108670-3/PS7520_1315-1.exe

    Kind regards

    Shlomi

Maybe you are looking for

  • Disable auto correct?

    It is very frustrating when the automatic correction becomes "mit" "MIT" because AutoCorrect is programmed to capitalize "mit" abbreviation of Massachusetts Institute of Technology and becomes "Bis Freitag" to "Bus freitag. I would like to disable th

  • Satellite P30-145: White Rectangle on screen

    I have a Toshiba Satellite P30-145, and he has recently developed a problem with the display. Whenever the computer is turned on, there is a large white rectangle covering part of the screen from top to bottom. Stopping and restarting the computer di

  • Update video card for m8430f

    I currently have a Geoforce 8500GT. Is there a better update available. I have 300 w power, windows 7 64 bit, 8 MB of ram ddr2 and single slot pci express.

  • When you close the popup only proceed

    Hello In my fieldChanged(), I ask a pop-up message. The popup has a close button that closes the popup. I don't want the application to perform the work until the context menu does not close. I am not able to do this. The code is: public void fieldCh

  • Running in parallel DML not forced

    HelloI work with an Oracle RDBMS 12cR1,I amcurrently how can I influence parallel experimentation DML and parallel DDL (for example edit.For example, I have the following settings:parallel_degree_level = 100parallel_degree_limit = CPUparallel_degree_