HP Photosmart C4580, Windows 7, no disk, need to scan?

Similar Questions

• I have a Photosmart C4580 all-in-one, do I need a wired connection to analyze instead of the wireless

  PhotoSmart C4580 - windows 7 - wireless set up - how to scan? No problem to print or copy, except the printing from the internet. Keep getting errror occurred in the script on this page. HP does support not any help so far

  Thanks Sabretooth04 works great now. Much better than with an old computer and printer just to analyze something

• Recovery disk need to reinstall Windows Vista

  original title: need to help restore my laptop and do not have disc for windows vista untimate, how do I do that

  I have windows vista ultimate and need to reinstall operating system but do not have the disc to do this, what can I do, please email me at * address email is removed from the privacy * with a solution to this problem.  My computer is about to crash because of a sort of Trojan horse.  Please notify.

  Hello

  Here are the other ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  or try to remove malicious software

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Problems to install the driver for printer HP Photosmart C4580 point Windows 8.1

  I bought a new laptop (Asus i7 with Win 8.1) and I'am trying to install the current driver for my HP Photosmart C4580 printer. I downloaded the driver full HP website: size 233 Kb, but when I try to install it I get the same message: ' Impossibile find it file specificato: c:\Users\Appdata\Local\Temp\7zs08EC\Setup\hpzpnp.ic...» »

  Please help me. TXS a lot.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• HP Photosmart C4580 all-in-One Printer compatibility with Windows RT

  Original title: HP Photosmart C4580 all-in-One Printer

  My HP Photosmart C4580 all-in-one printer will always be compatible with Windows RT and my new Surface?

  Hello Jade_E,

  Your printer will be compatible with your Surface RT when HP develops and releases a pilot of RT for the HP Photosmart C4580. Hope it's soon.

  Have you tried any other HP drivers when you install this printer on the Surface? Because these drivers are generic, one of the other HP drivers might work.

  If you find a driver that works, please let us know which driver he is. Thank you!

• Win 8 - Photosmart c4580 not scan with HP Solution Center lack wifi

  HP Photosmart c4580

  8 64-bit Windows

  My printer is Photosmart c4580, and I have Windows 8 64-bit operating system.

  I can print throw my wi - fi connection, but I can't scan.

  If I want to analyze I need to plug the usb cable (10 meters long, because the printer is in the other room).

  I want to see the level of ink and I can't because I don't have the win8 HP Solution Center.

  Try to install the drivers win7 and Solution Center (PS_AIO_04_C4500_USW_Full_Win_WW_130_140.exe) (propriety - win7 run mode), and the program crashes.

  What can I do to scan using my wifi connection and installation of HP Solution Center

  Thank you

  Everything is ok now with the new drivers.

  Thank you

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109997-1 & CC = UK & DLC = in & LC = on & os = 4132 & Product = 3418707 & sw_lang = El

• HP Photosmart C4580: disc lost installation for HP Photosmart C4580

  Hello

  My apologies if I am asking about a problem solved a million times before, but I'm a newbie here and have tried and tried to google the answer...

  I got my C4580 for several years and has struggled to implement the wireless have been use it via the USB port.  But now, I need to move my printer and would like to use wireless.  But I lost the installation disc.  Because I use a Mac I can not find via download installation disk because Apple is apparently SO smart it does everything what in the background.

  I can't have parameters to configure my wireless network, and it makes me a little crazy.  When I go the HP on the Mac utility, it says "this printer is already implemented".

  Someone knows how to change the wireless set up on a Mac?

  Thanks in advance for any help.

  H

  Welcome to the community of HP @hkmarlborough,

  I appreciate that you try to set up your HP Photosmart C4580 as a wireless printer. I'll be happy to help you.

  Below, I've posted a link to a document that provides information on how to configure the printer for a wireless network. When you open the link, scroll down to the section called 'OS X v10.8 Mountain Lion and OS X v10.9 Mavericks' (should work for OS x 10.11).

  Set up your printer for a wireless network for the printer HP Photosmart C4380-C4500 all-in-one series

  Let me know if you are able to get the printer put in place for the wireless, or if you have other questions.

• PHOTOSMART C4580: SOLUTION CENTER WRONG FUNCTION

  I can't access the solution center to change the print setting. An error message reads ' error in C:\Program HP analysis-Imaging\bin\hpqscloc\1033.xml. I uninstalled and reinstalled at least three times makes no difference can someone help please.

  Hey @SANDY6,

  Welcome to the Forums of HP Support!

  I understand that you get the message "Parsing Error... 1033.XML' when accessing the HP Solution Center software on your computer in Windows 7 for your HP Photosmart C4580 all-in-One Printer. I would like to help you today with this error message. Appears not to be a conflict between the HP full feature software and driver for your printer and your computer package. Can I please you follow the steps below to resolve this issue.

  If you have a USB cable connecting your printer to your computer, please unplug this cable now.

  Step 1: Remove temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  5. Close the Temp folder when it is empty
  6. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 2: Run the uninstall of level 3:

  1. Please click here to download the package full feature software and driver for your printer

  2. when the download is complete, please allow it to run

  3. an extraction should now take place. If the installation window opens automatically, please close it. You do not want to run a facility.

  4. click on the Start menu

  5. in the "search programs and files" box located just above to start after you click it, type %temp% , and press enter on your keyboard

  6. when the opening of the Temp folder please locate the 7z... file. Double left click on this folder to open it.

  

  7. left click on the Util folder to open it

  

  8. left click on the CCC folder to open it

  

  9 locate the Uninstall_L3 file at the bottom of the file. Double-click it to start the uninstall program.

  

  10. where the uninstall program launches, click continue.

  

  11. follow the prompts on the screen to complete the level 3 Uninstall. Restart the computer if prompted. Once the uninstall is complete, proceed to the next step.

  Step 3: Run a disk cleanup:

  1. Click the Start button to open Disk Cleanup . In the search box, type Disk Cleanup, then, in the list of results, click on Disk Cleanup.
  2. In the drives list, click the drive you want to clean (drive C), and then click OK.
  3. In the dialog box disk cleanup, on the Disk Cleanup tab, select the check boxes for the types of files that you want to remove, and then click OK.
  4. In the message that appears, click delete files.

  Microsoft: Delete files using disk cleanup

  Step 4: Install the latest Version of Adobe Flash:

  Please click here to download and install the latest version of Adobe Flash Player. Once the last version has been installed, please proceed to the next step.

  Step 5: Install the device:

  Please click here to download and install the drivers for your printer, once more. Once the download is complete, follow the prompts on the screen to install your printer. If you are using a USB connection cable please do not connect the USB cable until the installation program invites you to. Once installation is complete, please try to access to the HP solutions Center to check if the problem is now resolved.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• HP Photosmart C4580 all-in-One: the hp Device Manager

  I recently moved and wireless printing is no longer available, because I have a new router, etc. I'm trying to go through the steps to get my printer to print wireless again. I started with the (difficult to understand) online books and forums, but I encountered a problem.

  A step now asks me to open on my Mac HP Device Manager, but I do not have this program. I guess that it has deleted along the way. Where can I download to continue to implement the capabilities of my wifi printer?

  Thank you!

  Hello @joyandlady,

  Welcome to the Forums of HP Support!

  I would like to help you today with the configuration of your HP Photosmart C4580 all-in-One printer to print wirelessly with your computer Mac OS X 10.7. The Device Manager is a feature of the Windows operating system. I don't know why you got a quick for you going into the Device Manager, but it is not possible for your Mac operating system. Now, because of the age of your unit HP Photosmart there is no downloadable HP full feature software or driver for your printer in Mac OS X 10.7. Therefore, you rely on an update from Apple to install printing and scanning of the capabilities of your printer on your Mac. For this reason, you are not able to perform normal wireless setup wireless for your printer configuration is done via the installation package. For this reason, we have two options.

  Option 1: Install the printer on a supported operating system and run the wireless installation. Once the wireless feature is successfully configured you simply (+) add your printer to your Mac OS X 10.7 for printing and scanning.

  Your printer has a pilot full of features in favor:

  • Mac OS X 10.4
  • Mac OS X 10.5
  • Mac OS X 10.6
  • Windows XP
  • Windows Vista
  • Windows 7
  • Windows 8
  • Windows 8.1

  These operating systems listed will allow you to easily configure the feature wireless on your printer.

  Option 2: Run an Ad Hoc of the wireless installation. This can be a bit difficult. To set up your printer through the Ad-Hoc connection, please follow the steps below.

  1. Let's start by you information computers Mac network gathering because we will need shortly. Go to the Apple and select System Preferences

  2. Select the network

  3. when the network window opens, choose Airport (or Wifi) on the left side:

  

  4. click on the button "Advanced" at the bottom on the left.

  5. Select the TCP/IP tab at the top

  6. take note of the IP address of your computer that we need to reference later

  7 enter your subnet mask and the numbers of your router (default gateway) , because we have also to those too:

  

  8. close the network window.

  9. click on the icon Wireless at the top of your Mac on the right side:

  

  10. connect to the network that appears with your HP C4580 inside.

  11. on your printer wireless light should go solid after a few minutes. At this point, you want to print a Network Configuration report.
  

  Print a Network Configuration report using the button Wireless on the product, press the grey button until print a Network Configuration Page is highlighted, and then press the Green button. A Configuration page prints, including the IP address you need to the next step.

  12. the Network Configuration report new take the new IP address 169.254.xxx.xxx and open your Internet browser.

  13. your Internet browser will not load a real Web site, because you are not on the Internet right now:

  

  14 take your new 169.254.xxx.xxx IP address and enter it in the address bar of web page anyway and go to this site. Do not include the www.

  15. click on the Networking at the top tab:

  

  16. Select connection on the left hand side

  17 select Wireless at the top and then Advanced:

  

  18 type your SSID (your home or business Internet network name)

  19 select Infrastructure

  20 choose your encryption. He will already be WEP or WPA (you may need to ask your internet provider if you don't know what yours is)

  21 type your network (password/password) in the field below WPA or WEP key, one that corresponds to your type of encryption that is given to you by your internet provider.

  22. click on apply bottom-right:

  

  23. on your Mac , click the Wireless at the top:

  

  24. reconnect to your normal Internet

  25. go to Apple - System Preferences - select print and scan

  26. click on the Plus (+) button to add your printer Hello

  Now that your wireless printer is added, please test printing.

  Please reply to this message with the result of your troubleshooting. If you prefer to run the installation Wireless under an operating system that is supported, please let me know which operating system you use, and I can guide you through these steps. Good luck!

• HP Photosmart C4580 Wireless - can't get to work

  I just had to get a new computer and a new printer.  While I was there, I set up a wireless network.  I am running Windows Vista 64-bit on the new computer (gateway) and a HP Photosmart C4580 printer with wireless capability.  I can't the printer to work regularly.  Whenever I have reinstall, it works very well until it's the computer goes to sleep or stops.  Then, it no longer works.  Reinstall... it works... sleep, it stops working... vicious circle.

  I spent hours with HP cat trying to solve this problem and even more time to try to find me a solution.  This is my first HP product and I must say that I am at the end of my mind with him.  I can't believe that I'm the only one on Earth with a similar problem, but I can't find any help anywhere.  I'm sure I'm doing something wrong, but I did not have enough experience to understand and can't seem to find someone who does.

  I'd appreciate any help I can get at this point.  This is my last resort before you give up and go back to Dell!

  I have a few questions and suggestions:

  1. The IP address of the printer, the computer or both changes over time?
  2. I recommend that you set a computer DHCP reservation and the printer.  Connect to your wireless router, look for LAN Configuration, address reservation.  You should see a list of clients connected to the wireless router.  Define bookings of at least the printer and the computer.
  3. The SW (sorry about that) to uninstall and reinstall.

  With the IP address of the computer and the printer now set, the SW should not have problems to find the printer when it wakes up from sleep (I hope).

  BTW - unless you are using a surge protector, very inexpensive, the printer should be fine tuned on.   I think that the Councils to plug the printer directly into the wall, as a way to solve the problems SW is very interesting.

• HP Photosmart C4580 WIFI adapter

  I just bought a HP Photosmart C4580 WIFI, purchased from the United States. The included adapter is universal? It is, I simply a European plug on my power cable, or do I have to order a European adapter as well?

  Hello @andreasfmpro,

  I'm glad to hear that your all got power problem sorted.

  Regarding your print cartridge compatibility problems, this HP Photosmart is regionalized for cartridges. First installed cartridges will set the region in your printer in any region that the cartridges are purchased. Because you can not buy the HP 74 black cartridge or cartridge three colors HP 75 in Europe, your printer can be reset to allow a new regionalization to happen with your European cartridges.

  In order to reset the process of regionalization of the printer, you will need to call our technical helpline by phone.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  HP worldwide Support

  Happy holidays!

• HP Photosmart C4580 All in One

  Can I install a HP Photosmart C4580 All in one printer on a netbook with Windows 7 Starter

  Depending on the case, you have Windows 7 64-bit or 32-bit, you can find the drivers here:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=3418707&

  If you have any other questions please post back catocornelia

• Error message HP Photosmart C4580 - 'Lack of cartridges print or not detected'.

  Original title: error HP Photosmart C4580

  My HP Photosmart C4580 gives the following message: "Print Cartridge missing or not detected". I cleaned and reinstalled both cartridges, which has been printing fine until this message appeared suddenly. How can I make them disappear and return the printer mode?
  I'm not in the mood to buy new ink cartridges just to see if that will solve the problem, then waste your time with them I find this is a fatal problem with the printer hardware.

  Hello

  1 have had any changes made on the computer before the show?

  2 Windows operating system you are using?

  Method 1:

  See the article and try to run the Troubleshooter:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  See the article and try to run the HP diagnostic tools:

  Find and fix common printer problems using HP Diagnostic tools

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02073861&cc=us&DLC=en&LC=en

  Method 3:

  See the articles and check if that helps:

  "Cartridge problem" or "Incompatible cartridge" Message "Cartridge missing or damaged" appears on the computer

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01442936&cc=us&DLC=en&LC=en&product=3418707

  Let us know if it helps.

• How can I get one for my windows XP restore disk

  Original title: How to make one for my windows XP restore disk

  My laptop keeps just reboot. It does not start in safe mode. I think I may need to use the restore disc which I lost. How can I fix the laptop without a disc? Where can I get a drive?

  Have you tried last known good configuration?
  http://support.Microsoft.com/kb/307852

  What is your computer brand and model? You may be able to buy a drive for restoration of the manufacturer. Otherwise, the option to restore factory settings may be an option.

  Restore factory settings is destructive that it deletes all the data files or programs installed if you need to explore methods of recovery before restoring. It can be the installation of the hard drive as a second drive in another computer or using an external hard drive enclosure. You should be aware that portable players are 2.5 "and office disks are 3.5" as this afects the options available.

• Windows cannot run disk checking on this volume, because it is write protected.

  I can't get the start menu appears in safe mode then I have botted on a cd with the command prompt and when I type chkdsk/r, so, it gives me "windows cannot run disk checkingo n this volume because it is write protected."  Can someone tell me what I can do to fix this?

  If you encounter a problem that you need help, follow these steps:

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  What you see you don't think you need to see?

  What do not you think that you should see?

  Fill in the blank: my system worked well until: _.

  If you just want to start by running chkdsk /r on your hard drive (a good idea), I would follow the instructions below:

  Use the XP Recovery Console to check the file system on your HARD drive and fix all the problems.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!