HP Photosmart C4580 WIFI adapter

Similar Questions

• Win 8 - Photosmart c4580 not scan with HP Solution Center lack wifi

  HP Photosmart c4580

  8 64-bit Windows

  My printer is Photosmart c4580, and I have Windows 8 64-bit operating system.

  I can print throw my wi - fi connection, but I can't scan.

  If I want to analyze I need to plug the usb cable (10 meters long, because the printer is in the other room).

  I want to see the level of ink and I can't because I don't have the win8 HP Solution Center.

  Try to install the drivers win7 and Solution Center (PS_AIO_04_C4500_USW_Full_Win_WW_130_140.exe) (propriety - win7 run mode), and the program crashes.

  What can I do to scan using my wifi connection and installation of HP Solution Center

  Thank you

  Everything is ok now with the new drivers.

  Thank you

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109997-1 & CC = UK & DLC = in & LC = on & os = 4132 & Product = 3418707 & sw_lang = El

• HP Photosmart C4580 all-in-One: the hp Device Manager

  I recently moved and wireless printing is no longer available, because I have a new router, etc. I'm trying to go through the steps to get my printer to print wireless again. I started with the (difficult to understand) online books and forums, but I encountered a problem.

  A step now asks me to open on my Mac HP Device Manager, but I do not have this program. I guess that it has deleted along the way. Where can I download to continue to implement the capabilities of my wifi printer?

  Thank you!

  Hello @joyandlady,

  Welcome to the Forums of HP Support!

  I would like to help you today with the configuration of your HP Photosmart C4580 all-in-One printer to print wirelessly with your computer Mac OS X 10.7. The Device Manager is a feature of the Windows operating system. I don't know why you got a quick for you going into the Device Manager, but it is not possible for your Mac operating system. Now, because of the age of your unit HP Photosmart there is no downloadable HP full feature software or driver for your printer in Mac OS X 10.7. Therefore, you rely on an update from Apple to install printing and scanning of the capabilities of your printer on your Mac. For this reason, you are not able to perform normal wireless setup wireless for your printer configuration is done via the installation package. For this reason, we have two options.

  Option 1: Install the printer on a supported operating system and run the wireless installation. Once the wireless feature is successfully configured you simply (+) add your printer to your Mac OS X 10.7 for printing and scanning.

  Your printer has a pilot full of features in favor:

  • Mac OS X 10.4
  • Mac OS X 10.5
  • Mac OS X 10.6
  • Windows XP
  • Windows Vista
  • Windows 7
  • Windows 8
  • Windows 8.1

  These operating systems listed will allow you to easily configure the feature wireless on your printer.

  Option 2: Run an Ad Hoc of the wireless installation. This can be a bit difficult. To set up your printer through the Ad-Hoc connection, please follow the steps below.

  1. Let's start by you information computers Mac network gathering because we will need shortly. Go to the Apple and select System Preferences

  2. Select the network

  3. when the network window opens, choose Airport (or Wifi) on the left side:

  

  4. click on the button "Advanced" at the bottom on the left.

  5. Select the TCP/IP tab at the top

  6. take note of the IP address of your computer that we need to reference later

  7 enter your subnet mask and the numbers of your router (default gateway) , because we have also to those too:

  

  8. close the network window.

  9. click on the icon Wireless at the top of your Mac on the right side:

  

  10. connect to the network that appears with your HP C4580 inside.

  11. on your printer wireless light should go solid after a few minutes. At this point, you want to print a Network Configuration report.
  

  Print a Network Configuration report using the button Wireless on the product, press the grey button until print a Network Configuration Page is highlighted, and then press the Green button. A Configuration page prints, including the IP address you need to the next step.

  12. the Network Configuration report new take the new IP address 169.254.xxx.xxx and open your Internet browser.

  13. your Internet browser will not load a real Web site, because you are not on the Internet right now:

  

  14 take your new 169.254.xxx.xxx IP address and enter it in the address bar of web page anyway and go to this site. Do not include the www.

  15. click on the Networking at the top tab:

  

  16. Select connection on the left hand side

  17 select Wireless at the top and then Advanced:

  

  18 type your SSID (your home or business Internet network name)

  19 select Infrastructure

  20 choose your encryption. He will already be WEP or WPA (you may need to ask your internet provider if you don't know what yours is)

  21 type your network (password/password) in the field below WPA or WEP key, one that corresponds to your type of encryption that is given to you by your internet provider.

  22. click on apply bottom-right:

  

  23. on your Mac , click the Wireless at the top:

  

  24. reconnect to your normal Internet

  25. go to Apple - System Preferences - select print and scan

  26. click on the Plus (+) button to add your printer Hello

  Now that your wireless printer is added, please test printing.

  Please reply to this message with the result of your troubleshooting. If you prefer to run the installation Wireless under an operating system that is supported, please let me know which operating system you use, and I can guide you through these steps. Good luck!

• Photosmart c4580 print problem

  Hello, I have a photosmart c4580 running on wifi... I have two mac osx on 10.7.4 but when I print, it says 'printing 100% ' then I get a messase saying 'this printer is not responding' IV ' e removed the software from the computer off and removed the printer and reinstalled but it still has the same problem...

  Can anyone help?

  Thank you

  Daniel

  Unfortunately, the problem of compatibility makes it is a bit difficult.  The update of the firmware will fix the problem, but it does not work with 10.8.

  The only way to get the updated firmware update is to find a system that uses OS X 10.5 or more.  The update utility lists Mac OS x 10.4, Mac OS X 10.5 and Mac OS X as in charge.  I suspect that the last option, although it is not listed, is 10.6.  10.6 may work, but I recommend you find a 10.5 system to ensure the update will be a success.

• RALink RT5390 802.11b/g/n WiFi Adapter will remain not connected

  I use a laptop of Hp 2000, and the adapter installed on the computer provided wireless is a Ralink RT5390 802.11b/g/n WiFi Adapter.  I ran the driver update tool, and it says I have install the driver update.  I have also run the tool to "Diagnose the problem", and he says that he has no problem.  However, the computer loses internet connection constantly.  I guess it has something to do with the wireless adapter, because all other wireless in the House have no problems. The operating system is Windows 7.  I'm a little tech savvy and can normally include questions to just play with it for a while, but this one has me dumb founded, and its very annoying when you try to do something and you just loose connection and have to start all over again. Help, please!

  Hello:

  I found that the relying on a tool the driver does not always provide information.

  Here is the link to the latest version of the driver if you don't v.3.2.12.0 (13 April 2012) installed.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-104619-1 & mode = 3

  Paul

• Reader BDX4350 Blu - Ray - Wifi adapter needed

  I just got my BDX4350 Blu - Ray and am looking to buy a wifi adapter to connect to my network but can't find anywhere that says which adapter to use! Even the instructions did not help...

  The wifi adapter Toshiba only I can find is this a http://www.home-entertainment.toshiba.co.uk/Televisions/Accessories/WiFi-Dongle-WLM-20U2/#/detailsTab
  so, should I assume that it will work in my Blu - Ray player?

  Thank you

  Rich

  Yes, this Toshiba WLM20U2 - USB Dongle must be compatible with this Toshiba Blu - ray player

• BDX4350KB Wifi adapter and firmware upgrade doesn't work do not

  It is a sequel to my earlier question about if the WLM-20U2 Wifi adapter will work in my blu - ray player.

  After buying the adapter I plugged it and a message 'not supported', if I tried to connect wireless it says there was no an adapter connected.

  So I assumed that this necessary upgrade, so I formatted a 1 Gb USB drive with the FAT file system, downloaded the file level (version 39 http://www.dl.toshiba.com/player/NA/GB/EN/BDX4350KB.html) and copied the file .bin on the USB.

  When I plugged into the player and said to check the disk for a file to update it tells me that "frontend file is not found"... There was only one file to download, and it wasn't in a folder so I guess I'm supposed to just copy that file on the USB drive.

  I checked the USB port with a memory stick with photos on and it works fine.

  How to get the upgrade to work in the hope that it will enable the wifi adapter to work?

  Thank you

  Have you checked the guide in PDF firmware update?
  [Update firmware BDX4350KB | http://fget.dl.toshiba.com/manual/install/10009/Installation_Instruction.pdf?fromPid=%2Fplayer%2FN A%2FGB%2FEN%2FBDX4350KB.html&f=Installation_Instru ction.pdf]

  _ * How to upgrade the F/W * _

  (1) update firmware requires the USB of size max.2GB. Please make sure you format the Flash DRIVE to FAT/FAT32 before you start the upgrade procedure.
  ? Create a new folder on the USB drive and name it UPG_ALL
  ? Unzip the firmware file and copy it in the folder UPG_ALL.

  2) turn on the BD? Drive and make sure that you can see the player's on-screen Menu.
  ? Insert the USB key containing the Firmware upgrade file in the USB of the Blu slot? ray player

  3) press the "SETUP" button on the remote control.

  ? Select keys on the remote control UP/DOWN
  ? Symptom
  ? Upgrade
  ? USB storage device

  4) press the OK button on the remote control depending on the USB storage device.
  ? Now the upgrade file is under research. Please wait massage will appear

• HP Pavilion dv7 Notebook PC: dual band wifi adapter card required for HP Pavilion DV7 - 6157cl, product # LW465UA #ABA

  I would like to replace an a single band with a dual band wifi wifi adapter card for HP Pavilion DV7 products - 6157cl # LW465UA #ABA.  A6 - 3400M = AMD processor.

  Help?

  Thank you.

  Hey @dct1954 ,

  I called support and they confirm that even if it shows that it will be compatible, there will be a problem. They recommend using a USB dongle to give you the 5 GHz, you need.

  Thank you.

• Photosmart C4580 all-in-One - color print is not true

  Regardless of the software application in use, our printer does not print the colors on the screen. We have worked through all the settings and the types of paper and color choices, and nothing seems to make a difference. Tonight I prepared a certificate using PowerPoint and one of the predefined themes - nice blue background prnited on a Brown dirty. Ideas, suggestions, etc.?

  Hello there Hermits2,

  I saw your post on the issue of "print quality" you have little matter where you want to print from your Photosmart C4580.

  I understand that you have already tried several troubleshooting steps however, browse the guide below and if anything that you have not yet tried, try them. The print heads could very well be on their way if do not help the steps. If this is the case, then I would say calling HP support to see about a trade in option for you.

  Missing colors in printing

  If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a great Monday

• How can I change the SSID to a Photosmart C4580?

  I browsed the forum and read some articles which none still worked. I use a Mac and spin the OS of Yosemite. In the sourse of trying to get the ro printer recognize the new router I have rest the factory default, so he now tells me that the SSID is hpsetup. How can I now change that to pick up the new router SSID?

  Hey Andy,

  You can try to enter the password in the section "WPA - PSK", instead of "WEP encryption" section, to see if it will work. It won't hurt to not test.

  Here are a few screenshots from another thread with someone who has the same issue which may help:

  Photosmart C4580 spend direct USB for iMac, wireless through Time Capsule

  If try your password does not work, you can try an application called Keychain, which can be used to retrieve wireless password, just to make sure that you use the same one.

  How to manage passwords with Keychain Access

  I hope that helps you

• WiFi adapter for hp compaq 15 computer pc laptop 15-s006tu - windows 7 (32 bit)

  WiFi adapter for hp compaq 15 computer pc laptop 15-s006tu - windows 7 (32 bit)

  Hello:

  I see that something is wrong here.

  This link works...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.tpst=swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_131223_1 & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• WiFi adapter has gone from one day to the next

  HI - can someone help me understand why the wifi adapter might have disappeared since the device from one day to the next Manager? And how do I get it back?

  Thank you very much

  P

  Hi P_1

  One of the reasons why a device disappear are simple a hardware malfunction.
  It would be very interesting to know what model of laptop you have and what card WLan disappeared.
  But generally if the Wlan chip isn t listed in Device Manager, and if there is no yellow or peripheral exclamation points strangers, then everything looks like a hardware failure.

• Update for hp pavilion g6-1d73us WiFi adapter

  I have a HP Pavilion g6-1d73us running Windows 7 Home Premium with Intel Core i3 2.30 GHz, 4 GB RAM, 64-bit OS and want to upgrade my wireless WiFi 802.11ac 802.11n wifi adapter so I can also change my modem & router to the new, faster standard. The current wifi adapter I have is Realtek RTL8188CE 802.11 b/g/n wifi adapt. I studied the material on the internet and I think I want an Intel Wireless AC 7260 wifi adapter, but I don't know if it is compatible with my laptop. Could you please tell me what 802.11ac wireless card or adapter is compatible with my laptop or if I'm even able to upgrade that component. My computer works fine and has no problem. Thank you.

  Sorry no. The computer HP laptop motherboard has a BIOS program that is configured to stop the boot process, if all the wireless but very specific cards is installed. In the case of your laptop, no adapter 802.11ac lies on the 'white list' to boot.

  Do not shoot the Messenger.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• M70: WiFi adapter does not connect to the wifi Lan

  Hello
  I have the Satellite M70-122 with an Intel PRO set wireless adapter 2200BG Driver version 9.0.2.25. ConfigFree radar screen correctly identifies the wifi router of my Motorola, but when I click on and get the router on the icon of the laptop, no connection is established and there is a message that says:
  "Sell another application is controlling the wireless card."

  I disabled the "use Windows to configure my wireless" box under settings to connect wireless but no luck.

  In addition, there is no wifi adapter icon in the status bar, or I can get to a window with the settings of the adapter to enter the SSID and WEP details.

  Any help will be appreciated.

  Hello

  Have you used a tool of connectivity like Atheros WLan client utility?
  On WEP:
  PC card encryption is hardware specific. Maybe if it of not possible to use WEP encryption, because the card doesn t that supports.

  Please also see this page:
  http://support.Intel.com/support/wireless/WLAN/pro2200bg/index.htm

  Good bye

• Wifi adapter A6100 lag spikes / logout

  Hello

  I bought a computer on an online store last month and I need to buy a USB wireless adapter, so I bought this USB of A6100 WiFi adapter. Since I was able to connect to the internet, I noticed a lot of split shift (of 75ms to 500 + for a few seconds) that I had not on my laptop, even if the signal quality is Excellent. Also when I turn on my computer, there is a great chance that I can connect to my router, but not to the internet. In this case, I simply right click / solve problems and the same error appears 9 times out of 10 every time: there's a protocol missing on the computer.

  I tried to update my drivers but nothing works. If I want a replacement for this card, I obviously need to go back to the store I bought it will take probably a few weeks but I can't wait and I have no other possibility to connect to my router (any other USB adapters / no ethernet not cable because I am a little too far from the router).

  Furthermore, I use Windows 10.

  Is there a quick fix for me or I must send my rear adapter for a replacement?

  Thank you!

  I decided to buy a cable and everything works fine now. The adapter was defective from the beginning... I'll return to the store where I bought it and try to get a refund or a replacement...

  Thanks for your help!