HP Photosmart C7280 - cannot get top of breaks on the screen

Similar Questions

• on my laptop of his fathers ' key stopped working and now he cannot get on his laptop because the password has a S in there.

  original title: laptop trouble

  Good so recently on my laptop of his fathers has ' key stopped working and now he cannot get on his laptop because the password has a S in there. He tried to clean the key to bored all possible ways, and nothing works. He wondered if he had a Ctrl function that would allow him to put a s with the key or bypass the password lock. Also, it has no access to a USB keybored.

  If the account in question was not the built-in account named Administrator, and then log on to that account and go to control panel > users to change the password.

  The password for the administrator built-in account is blank (no password).

  To connect to the built-in Administrator account:

  Reboot safe mode: press F8 immediately after power on.  The administrator account is displayed on the homescreen mode without failure.

• And how does one remove Christmas lights that have been offered as a decoration for the top and shifts of the screen. They tend to hide the navigation bar.

  And how one removes the Christmas lights that have been offered as a decoration for the top and bottom of the screen. They tend to hide the navigation bar. Several days ago Firefox gave the 'dress-up' in a message.

  It seems that https://addons.mozilla.org/firefox/addon/christmas-lights/ is added as an extension, but is categorized as a character (lightweight themes). Go to tools > Modules then check extensions and themes, and then uninstall it.

  Now that the status bar is now the toolbar addons that I see those that are listed are all personas and they do not affect the toolbar addons you would also find a theme, and think that it must be very confused now that I no longer able to filter topics with a Google addons research - phooey.

  Extensions can be identified with intitle: Add - ons and have changed my research of extension add-ons accordingly.

• HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

  Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

  Hi @Ron9871,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.

  Please restart the router, the printer and the computer in this sequence.

  If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  You can try to change your WSD printer port by a Standard TCP/IP port.

  To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

   

• Photos appear white and cannot get images to display on the photos

  Original title: I CANNOT GET PICTURES TO DISPLAY ON THUMNAILS, THEY APPEAR as WHITE, WITH a RECORD #, WHY?

  WHEN I NAVIGATE TO UPLOAD PICTURES, MY PICTURES APPEAR IN WHITE, WITH A FILE # BELOW THEM, I CAN'T S EE THE MINIATURE OF THE PHOTOS, I DID CHANGE SOMETHING?

  Hi marvin z..

  1. are you using Windows Photo gallery?

  2. were you able to view a thumbnail preview?

  2. you remember to make changes to the computer before this problem?

  You need enable preview of thumbnails in the navigation pane.

  a. open the pictures folder by clicking the Start button, click photos.

  b. in the Navigation pane, click the folder that contains the images that you want to display.

  All images in this folder are displayed.

  c. click on the arrow next to the view button and then move the slider to change the size of thumbnails.

  Check out the link:

  View and print picture thumbnails

  http://Windows.Microsoft.com/en-us/Windows-Vista/view-and-print-picture-thumbnails

  Also check out the link:

  Change the thumbnail size details and file

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-thumbnail-size-and-file-details

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Photosmart c7280 will not keep Wi - Fi. said the radio but the radio works failed. repairable

  HP photosmart c7280 wireless printer has been working and connected to the router. Stop printing. The test report under collar "Radio on", according to Radio wireless working' fail. Is - fixable? The printer is only used wireless and not as part of a networked system.

  I thank very you much for your help and confirmation. I certainly could have been more specific about the problem and what I did. It was my first time, and you were very understanding.

  Thank you once again

  Sandy

• Cannot get 12.4SE to use the encrypted password for ODBC

  Hello

  We run gendata/genprint on the Linux platform and move from 11.5 to 12.4SE. The MRL is in a database of DB2 installed on MVS (and connect via ODBC). We installed the 12.4SE on the server, the engines and copied the entire folder structure, including our ISP * files, our installation of 11.5 - didn't change at all. If I run the motors with an unencrypted password, it works fine. The problem I'm running is when I run with a password encrypted in the ODBC DBHandler (that is what we have in our configuration 11.5), I get a lot of mistakes (the first letter is actually absent from these messages, I'm not myself truncating):

  Error in main(): unable to RunGenData(). See the errors file for more messages.

  Warning in RPDefDisplayProc(): display user procedure has not been defined.

  arningCountSIFileNamecratch/home/dmkr/documaker/rel124/rps100/rplib/unix /... /c/rperr.cSILineNumber099

  rrorCountSIFileNamecratch/home/dmkr/documaker/rel124/rps100/rplib/unix /... /c/rperr.cSILineNumber115

  lapsedTimeSIFileNamecratch/home/dmkr/documaker/rel124/rps100/rplib/unix /... /c/rperr.cSILineNumber193

  enData Completed-

  When I go to the ERRFILE.dat, I see:

  Transaction error report - system timestamp: Mon oct 19 12:36:33 2015
  DM12041: Error: error library FAP: Transaction: <>, area: ODBC error >
  Code1: <-30082 >, code2: < 4294937214 >
  message: 08001-30082 [unixODBC] [IBM] [CLI driver] security SQL30082N treatment failed with reason "3' ("PASSWORD MISSING").  SQLSTATE = 08001 >.
  DM12041: Error: error library FAP: Transaction: <>, area: < LBYInitializeLoaders() >
  Code1: < 0 >, code2: < 0 >
  message: failed to initialize the library < FJ§ > >.
  DM15066: Error RunGenData: could not LBYInitializeLoaders().   The system is configured to use the library, but the library could not be initialized.  Verify that the library is properly specified in the INI file and is accessible.

  == > Number of warning: 0
  == > Error number: 3

  When I look to the top of DM15066, I see:

  Explanation
  The call to LBYInitializeLoaders failed in function (GenTrn.c, GenData.c or GenPrint/PrintEnv.c). The usual reason that LBYInitializeLoaders do not is that the library is stored in a DBMS (DB2, Oracle or SQL Server) and the DBMS or database in the DBMS is not accessible.

  Programmer's response
  Check that the DBMS or database in the DBMS used by the MRL is running. If this isn't the case, please re - initialize the DBMS or database in the DBMS.

  Anyone has an idea why my installation 12.4SE dislikes the encrypted passwords?

  Thank you

  Gregg

  I hope that I am not striking myself, but I think I have it working now. I started a support ticket about not being not able to get the cryrun utility to work on Linux, and when I hit the stage 2 ("solutions"), one of the proposed solutions talked about this specific question. He explained that specifying a folder deflib allow the utility Cryruw32.exe to place a file 'Omar', and that you then this odek file in your deflib when you try to run the documaker engine. I read the release notes, pointing to the "reference help utilities" for more information, but there is NOTHING in this guide for the Cryrun utility which mentions the file "odek".

  Anywho, I made a generic file deflib, run the utility, FTP'd the file down to the deflib of my application on the Linux server, copied the encrypted password new/different in fsiuser.ini, and voila, it ran!

  For those interested, it was Doc ID 2006951.1

  Thanks for your help.

• HP xw6200 workstation - cannot get to BIOS with F10 Setup screen

  HP xw6200 workstation - cannot get to the configuration screen of the BIOS with the question of the language with F10.  Because of a mental lapse, I turned on the SATA RAID Option ROM.   System fails to start on the C drive. It turns out that the system has an Adaptec 1420SA SATA HostRaid map three discs. I see now three readers at the start after I enable readers to show in the Adaptec utility. Two of the disks are configured in RAID 1 Boot on the C: drive.  He could not see the third disc in Windows Explorer, only the C: drive.

  At startup by pressing F10 I have only three options:

  1 Ethernet Boot Agent

  2 RAID Adaptec Configuration utility

  3 Intel RAID for Serial ATA

  My question is "How to get back in the BIOS to achieve the Advanced tab to disable the RAID SATA ROM Option?"

  This article is similar to your problem.  I would try to clear the CMOS memory.  If you open your PC, you should find a rider to move that will define your CMOS to default values.  When you move the jumper, let up for a minute and then bring it back.  If you can't find the jumper then try to remove the CMOS battery for a minute then replace.

• VMware workstation 8 briged connection cannot get an ip address from the dhcp server

  Hello, I hope someone can help me with this problem, my virtual machines are unable to obtain an ip address from my dhcp server in windows server 2008R2.

  VMware workstation 8 is running in windows 7 proff. 64-bit OS. My gets physical computer an ip Server dhcp without problem have access to the internet and everything works fine, but my VMs for some reason any cannot obtain an ip address from the DHCP server.  I updated virtual nework Briged editor one of my physical network interface cards. Then I put my VM NIC to briged in for some reason my VMs are unable to obtain an ip address. The ips only I get are 169.254.43.129 Add 255.255.0.0. any help would be very happy. Thank you very much.

  FYI - you have posted some of the vmware.log

• 2nd generation Apple Tv cannot get menu or menu settings on screen

  How can I get the menu or the menu of the settings for my generation Apple 2nd TV on my tv screen.

  I the have not used for some time and now the screen just displays pictures of wildlife from apple with the message from the Inbox on airplay

  I click the button menu on the remote control and if that had no effect then I pull the plug of the appletv and when I put it back in and he started it would still not be respons on the remote control, then I would change the battery of the remote control and if that did not help I she would connect to a computer with a usb end and normal microUSB cable in the other and then use iTunes on the computer for restore its firmware

• I use the helper downloader (ver. 2.2) when you save a video of WWII, during the reading period, I get some equidistant points from the screen and Flash

  I use the helper downloader (ver. 2.2)
  When you save a video of WWII on my Windows 7 Desktop, during the period of the video, I get points at equal distance between the screen and flashing arrow as well. What is the problem with my download?

  [email protected]

  Which may be caused by a problem with the codec that is used by this video and who is not taken care of correctly.

  You can open this video in another video player to see if it works there?

  What kind of video is it?

• the mouse cursor suddenly began to be stuck at the edge of the top or bottom of the screen.

  using Win 7 and all of a sudden today the mouse cursor would not and was stuck at the bottom or top of my edge of the screen.  I tried several different mice, both wireless and wired without result.  I rebooted several times and made a thinking system restore date was also a problem. I looked everywhere for a solution and can not find a.  I don't think it is specific drive due to different types of mouse, I've tried.

  Help!

  Hi RussCFP,
   
  1. have you installed the latest drivers for the mouse on your computer?
  2 did you check for any yellow exclamation point in Device Manager?
  3. other USB devices work properly?

  Method 1:

  I suggest to start in safe mode and check that the device.
  
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode 
  Method 2:

  Try to run the troubleshooter and check.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   
  Method 3:
  
  Try to uninstall and reinstall the drivers for the mouse on your computer, to do that follow the steps below.
   
  a. Click Start and then click Control Panel.
  b. double-click System.
  c. click on the Hardware tab.
  d. click on Device Manager.
  e. expand mice and other pointing devices.
  f. right click on the device IntelliMouse that you want to delete and then click on uninstall.
  When the confirmation message appears, click Yes.
  Note Your mouse does not work at this stage.
  g. restart the computer.
   
  When your computer restarts, Microsoft Windows automatically detects the hardware change.
  Install the mouse driver and check its operation.
   
  Contact your hardware manufacturer for the latest drivers for your mouse.
  

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• How to make scrolling Parallax image extend at the top and bottom of the screen of the iPad vertically and horizontally?

  My website: http://hawkspdx.Club has the functions of Parallax scrolling, which does not completely extend to the bottom of the screen or all the way to the top of the screen on an iPad in vertical or horizontal position. How can I fix this please? The Parallax features work perfectly on desktop version.

  

  Above the iPad is horizontal and the picture behind the (blue) pieces cut before the top of the screen.

  

  Here the picture of parallax (blue) low cut with the iPad upright.

  

  Here the image in red (green arrow) does not reach the bottom of my screen of the iPad upright.

  

  Here the function of parallax (red image) does not extend to the top of the screen of the iPad upright.

  It would be necessary to redefine the points of scrolling of the image on the page wells so that they overlap edge on parchment.

  https://www.YouTube.com/watch?v=8m2Lg241e3A

  Thank you

  Sanjit

• Video clip focuses on the top left corner of the screen

  I have a clip I load via ACE, but there always time centered on the top left corner of the window, instead of centered in the window itself. If I create a new instance of it manually on the scene (not using LIKE), he plays in the right place. How do I tell him where to position themselves? _X and FLF properties seem to have no effect.
  
  Here is the code:
  
  var mc1:MovieClip;
  MC1 = this.createEmptyMovieClip ("DR1", this.getNextHighestDepth ());
  this.attachMovie "(DR1,"mc1", this.getNextHighestDepth ());
  MC1._x = 500;
  MC1._y = 500;
  MC1. Play();
  
  Thank you
  Beth

  Well, it's embarrassing.

  Moving the proposed code,

  this.attachMovie ("DR1", "mc1", this.getNextHighestDepth (), {_x:500,_y:500});})

  to frame the 113 has conducted the clip starting at the right time and to display to the right place.

  Remove the stop(); the first line of the clip action allowed to play! (I swear to you that I don't know how it got there).

  I created a very simple example to show the problem I was having to post the actual files and that one worked, I was forced to review my code once more, including the clip. It is then that I found the stop().

  Thanks for your help.

  Beth

• HP Photosmart c7280, cannot print from Iphone 4S?

  HP Windows 7 on wireless network.  phone is connected to the wireless network... MSG:... "" he can't find printer Air Print.

  Should you buy Icloud software for windows and MAC, and try to use HP to print from there?  Or is it a firmware download for the c7280 to communication w/IPHONE?

  Or my wife take this iphone and get an Android, if I can lift out of her hands?

  Hello
  
  First of all, please check if your printer in the list:
  
  http://support.Apple.com/kb/ht4356
  
  If so, you can use this hotfix/install:
  
  iPad: http://www.Apple.com/support/iPad/Assistant/AirPrint/
  iPhone: http://www.Apple.com/support/iPhone/Assistant/AirPrint/
  
  If NOT you must print using other applications (if applicable) such as
  
  http://iTunes.Apple.com/au/app/HP-eprint/id299531647?Mt=8

  Kind regards.