"" HP Photosmart e-all-in-one Pr: "HP Photosmart e-all-in-one printer - D110a installed 10 windows now scanner does not work

Similar Questions

• HP5610 All in One Printer and for some reason any fax does not work

  * - Original title - the printer does not properly

  I have a HP5610 All in One Printer and for some reason any fax does not work.  What could be the problem?  I don't have the CD installation disc.

  Hello

  To provide a proper resolution, I would need more information on your side.

  1. what operating system is installed?

  2. don't you make changes to the computer before this problem?

  We can refer to this article and check if that helps.

  Unable to send or receive Fax: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01670485

  You can also ask your question in the Forums of HP Support (scanning, fax and copy): http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/bd-p/Scan

  Thank you.

• Scanner does not work for all users on the computer Windows 7

  Photosmart 7510 Scanner does not work.  My scanner has the habit of work.   Now it does not for one of the three users on my Windows 7 desktop.

  I spent over 3 hours on the phone with HP.   They had me restart the computer, Plug and unplug the printer, reinstall the software twice under different names. The software depending on what user id, it is installed under allows access to the scanner/printer to one or more users.  The scanner works with Windows Paint software for all three nicknames.

  HP response is that some user control prevents the scanner software, who used to work on all three nicknames on the computer, which now works on one or more of the users.  They couldn't tell me which user control need changing.

  The HP solution is to restore my system when I could scan for all users of three.   I don't want to do that.   Does anyone have a better solution?

  The real problem is HP error messages.   When I click on scan a document, there is no answer.  Nothing happened.

  Then I tried to scan using Windows Fax and Scan.   I got an error message which helped me locate the source of the error.   I was able to fix the problem without creating a new user account.  I had deleted bu error the file MY Document.   Restore this file fixes the problem.

• Scanner does not work in a series w/All

  scanner does not work with the Deskjet F4100 series.  My printer disappeared when I tried to print a PDF file.  I had to uninstall/reinstall, but now I don't have access to Solutions HP Digital Imaging Monitor has it always says "no device found" and closes.  I have Window Vista 32. I tried to find the ".exe" file, but the errors say file is not found. The printer works, but the scanner. It shows that I have scanner Xerox Work Center but the profile shows no resolution or file name.  The properties that the scanner does not work properly, but solutions HP cannot detect a device.  Help

  Hello

  I received an update from HP on sat urday and when I finished the update (took about 3 hours) the long w/reinsert the disc provided F4100 w / all in one, I could finally connect to the Solutions Center, and now I can scan. YEA! When I turned on my computer the update automatically came and the restore point during a previous installation attempt.  Thank you very much, it means the world to me.  I will also send this message to someone else who was helping me.

  Richards

• CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  Try creating a new profile as a test to check whether your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• One of my ID Windows Live ID does not work

  One of my ID Windows Live ID does not work, I can't reset the password (I get an error), I can not connect with her online (I get an error).

  When I get the Live ID to submit a case on the support of Live ID site I get an error.  To clarify, errors are associated with the Live ID and come from Microsoft, it is not my PC that produces errors.

  I tried calling and e-mailing for the support to unsuccessfully (was returned to the site, which generates an error when I enter this Live ID, which means that I have no way to submit this problem in the right group - Live ID team)... What can I do to fix this problem?

  Hello

  The question you have posted is related to windows live ID and would be better suited to the community of windows live. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/product.aspx?ProductID=10

• I currently have an ad - one that I use frequently on IE8 which does not work on IE9. How can I stop to get a message that I have new updates when IE9 is the only update?

  I currently have an ad - one that I use frequently on IE8 which does not work on IE9.  How can I stop to get a message that I have new updates when IE9 is the only update?

  Hi altak38,
   
  -What is the add-on which you speak?
  -Are you referring to Windows Update with Internet Explorer 9 update several times even if it has been installed?
   
  If so, follow the steps in the following article to resolve this problem.
   
  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
   
  Post back with more information for the issuance of the add-on - to help you help.

• Assistant of migration used just one new imac and now cc does not work!

  Please help I just transferred all of old imac to a new imac with the migration but assistant now cc does not work, I got error message saying: "cc is needed to solve this problem. However, it is missing or damaged. Please download and install a new copy of the cc. "Well I've done a few times now and re mac began and also updated but still say the same thing.

  Hello

  Creative cloud apps cannot be migrated as a return to the top, you will need to download and install apps as a new on the new machine, please follow the steps below to remove and reinstall the creative cloud application:

  1 force quit Adobe all processes in the activity monitor (for example, CC, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  2-go to: Finder > Applications > utilities > Adobe installer > uninstall Adobe Creative cloud (if problems uninstall Trash)

  3-go to: Finder > Applications > utilities > (delete these two folders - creative cloud Adobe and Adobe Application Manager )

  4 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (It will open the folder of the user's library.)

  5. browse to the Application Support > Adobe > trash folder OOBE and AAM Updater folder so

  6. new > right-click on the icon in the Finder and select "go to" folder option. > you will get a text box, type in the following command and then press the 'return '.

  / library (It will open the library system folder.)

  7. browse to the Application Support > Adobe > trash folder OOBE and Adobe Application Manager / after that, rename the SL-STORE like SL-STORE_OLD

  8 - go to the Apple icon > System Preferences > privacy and security > firewall > OFF (to do this, you will need to click on the padlock in the lower left of this machine and then enter your mac password)

  9 - go to the Apple icon > System Preferences > Security and privacy > General > allow applications downloaded on should be put on ANYWHERE

  10 - Make sure of course there is no other program security Internet enabled - if it is then go ahead and launch CC app and login and check (check your extensions as well id browser it disable any toolbar security or advertising, blocking of extensions you installed them)

  Adobe 11 - run cleanup tool. > If so, select "Adobe Application Manager for Mac OS X 10.6 ' and then click on"Clean up selected. "

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

  12 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

  Let us know if that helps.

  Kind regards

  BANI

• MiFi will not work unless that plugged into the computer... Verizon no help at all it explains a vista problem... He used to work, but I think that an update did something to it and now it does not work...

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: hours on the phone with verizon... nothing is ready to throw the Verizon mifi and go to TMobile... forums looking for answers but not help there... seems a lot of people have this problem... someone at - it help him?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  A Beyschau of Annette

  Hello

  Quote: ' MiFi will not work unless plugged in to the computer.

  Where it has been plugged in before?

  If you are using to connect via Wireless, then it might be that your wireless connection has a problem.

  ----------------------------

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• All HP6210 in a Scanner does not work in Snow Lepoard.

  I upgraded my OS to Snow Leopard.

  I deleted all the old applications and drivers and redownloaded new drivers for the HP6210 all in one printer.  The printer works but I cannot scan any document.

  I tried using Image Capture too - but still does not work.

  When I scan of the device (in pdf format) Manager, I hear the scanner works, but and the popup error message "sorry, an unknown error has occurred."

  I went into System Preferences to find the scanner in the Print & Fax, HP6210 all-in One - on the scanning tab - it says no scanner found.

  Help, please.

  You have downloaded the software wrong (according to the link you posted).  This software is under 10.5 and will not work in 10.6.

  Uninstall and download this.

• Get all the different values in a table - 'or array elements' does not work with I32

  Hello

  I just found out that "array elements or" does not work with a table 1 d of integer values. I didn't expect that.

  I did a semi quick forum search and did not find a pointer to an effective solution. Can someone give me a hint?

  Do not back my initial intention is to list all the values that appear in an array of integers.

  I thought that if I converted the figures for powers of 2 and or I had solved the problem at hand - only to discover that the elements of array does not.

  If someone could propose a different approach, I'd be happy too.

  I should mention that the execution time is a factor here - I need a fast code, but any suggestions are welcome because they could help me get started.

  Best regards Florian

  Hi Florian.

  try this:

  

  "Function, it seems, the table of GOLD ' is polymorphic (as written in the context-sensitive help), but does not support arrays of I32. At least the error message means just that...

• Media Player Windows Media Player does not work. no error message. nothing at all

  Windows media player will not work. no error messages have nothing at all. its like iff, it does not exsist

  Hello

  1 did you changes to the computer before the show?

  2. what version of Windows you use?

  3. what version of Windows media player you are using?

  4 when was the last time you were able to access the drive Windows media?

   
   
  Provide more information about the issue so that we can better help you.

• Cannot run the screen saver because it requires a newer video card or one that is compataible with Direct3D. Hotfix does not work/run

  I am running windows 7 ultimate, 64-bit, SP1

  The screen savers say they can't run, they need a new video card, or a compatible with direct3d.

  I ran the fix.  The issue is pending. Hotfix: KB2159238

  http://support.Microsoft.com/kb/2159238

  All of the video drivers are up to date and they support Direct3D.

  Seems a lot of people have this issue - how to fix? Yet once again, the fix does not work (says "this update is not applicable to your computer")

  

  

  Hello Dave,

  Thank you for your response.

  I appreciate your time and your concern.

  It is normal that the fix is made for the Windows 7 version without service pack 1.

  I hope you can try the following methods provided in the previous post.

  However, if the problem persists, I suggest you to uninstall and reinstall display drivers.

  Step 1:
  Uninstall the display driver.

  a. Click Start, type Device Manager in the start search box and press ENTER.
  b. expand 'graphics', right-click on the map and click Uninstall.
  c. restart the computer, if the prompt message.

  Step 2:
  Install the latest driver to display from this link:
  http://66.226.78.22/DownloadSite/drivers/Intel/VGA/VGA (v15.33.31.64.3993) .zip

  For reference:
  http://www.ASRock.com/MB/Intel/B85M-ITX/?cat=download&OS=Win764

  Please keep us updated on the status of the issue.

  Thank you

• PSC 2210 all-in-one: PSC 2210 all-in-one with Windows 10: ok printer but the scanner does not work

  
  

  Hey @Manu37520,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Photosmart 8750: pilot built-in printer in win 8.1 64 bit does not

  Hello

  My photosmart 8750 printer, which is a great printer and still works fine, at least with my old laptop that runs windows xp not... Unfortunately with the built-in windows 8.1 HP printer driver (64-bit) does not at all.

  What's the case up to now, first time connected, the printer is recognized by windows 8.1 and the driver is installed automatically, if a printer test page send it prints normally. But it is she, anything else, pdf, word doc or an image will not print!

  The printer responds to a print command, to start something that looks like it's going to print, but after a few seconds it stops and nothing happens after that, if I look in the dialog box where the docs are normally listed as they wait to be printed there, I'veallready restarted the service of spool printing, but that has not worked... also reinstalled the printer some times , but that did not help...

  My perception now is that the driver for win 8.1 is the problem, because the printer works fine with the original HP driver on my laptop to win XP.

  If all goes well, there is a work around for this problem...

  Thanks in advance for any help!

  Diederik

  Hello kwikkwekkwak,

  Welcome to the HP Forums.

  I see that you are seen and problem when you try to print from the computer.

  I suggest that we start by running the HP print and Scan Doctor.  Please let me know if you see messages or error codes.

  Thanks for your time.

  See you soon,.