HP Photosmart C4180: B82C3ED8 Error Message

Similar Questions

• HP photosmart 6520: communication error message - distorted impression

  I updated my computer and when I install my printer hp photosmart 6520 goodbut everything then when I go to print I get the following message.

  Unable to communicate with the computer

  The print job is not complete because the printer is unavailable or offline. Check your wireless connection or the cable and make sure the printer is powered on and ready.

  If you have installed this printer by IP address, you may need to update the IP address. Use the element to IP address update at the entrance to start for this printer menu.

  Click Help for additional support information.

  To cancel the print job, click Cancel.

  I am connected via a cable and you have never configured with an IP address. The printer will print on what I want, but it is all distorted and the colors are all off. Please can someone help me solve this problem.

  Thank you

  Hi @Jo_74,

  Welcome to the HP Forums!

  I see that you get an error of communication, with your printer HP Photosmart 6520, Windows 8.1. And I'm happy to help you!

  What happens when you print a test page from the printer control panel? Video: printing a Test Page. See you again distorted impression?

  You see error messages on the display of the printer?

  In the meantime, try the following steps:

  (You can skip step 6 If you want to, because it is not a network connection)

  Step 1: Set the default printer driver

   

• Photosmart D110a. Error message: at least one of the cartridges has a problem.

  Photosmart D110a, Windows 7 32-bit, error message: at least one of the cartridges has a problem. Will print black if the deleted color cartridge. New cartridges does not solve the problem. Everything suggests not tried twice, cleaning, disconnect, etc..

  There is a document with the right information on how to help solve this problem located here.

  It seems that you have already made certain steps to help with this. If the printer is under warranty, then you may want to contact the HP Support on this device.

  Let me know if it helps.

• Photosmart pro B91980: error message

  Hello

  I wonder if anyone can help.

  I get an error message on my printer that reads, 'Service stall... '. Press ok to continue.

  I pressed ok, disconnected the power and then turned on the power to return, verified that the cartridges etc but still cannot print. I can't even print a test page.

  A. What does this message mean?

  Can B.How I solve the problem?

  Thanks for your help, but I managed to solve the problem. Nothing was blocked that was the problem. But I cleaned the bar along the print head and then cleaned the print heads and the surrounding area with distilled water. There was a lot of ink autour. This seems to have solved the problem. Hope it's useful for anyone that has this problem, especially this printer is a particularly expensive machine.

• Photosmart 7525e: print error message on the monitor, but PDF print OK

  W10 64 bit Office current with Windows updates.

  HP7525E connected via USB.  Current with updates from HP and exploit the full package of driver HP

  When I click to print a PDF file, I get a message popup Windows that quickly disappears, but the part of the message says «Error printing...» «or ' unable to print on...» ».  But the page prints OK anyway.  I have today when it appeared has clicked to print a Groupon in mode 2-sided but also chose to print only the current "page (and in my opinion, there is only 1 page).  Do not print in color, btw.

  A ran HP Print & doctor Scan that found no problems.

  Do not restart.

  Close the browser (Edge).

  Launch of the new browser and returned to Groupon.

  This time the same groupon (in monochrome) of printing simple face mode or mode 2 faces, that the error did not appear and the PDF printed fine as before.

  I have seen the error several times before but have not been studied.  I know I saw him several times when printing PDF files.  I don't remember if I saw it when you print other things.

  Completely uninstall Acrobat Reader on your system.  Now, go to Adobe and download and install Acrobat Reader DC.  Try now.

• HP Photosmart D110: scanning Error Message

  I get an error messgae when I try to scan another program or device use my printer, is the error 8, [(0, 18, - 2147467259)] someone can tell me how to solve this problem. I would really appreciate any help you can give me

  @cassamia

  Try to run this.

  HP printer install wizard for Windows

  http://FTP.HP.com/pub/softlib/software13/COL50403/ mp-2-150580/hppiw.exe

  After that.

  HP Print and Scan Doctor

  http://FTP.HP.com/pub/softlib/software13/COL50849/ mp-145514-3/HPPSdr.exe

  REO

• I have a mac os 10.6, hp photosmart c4795 and error message says offline.

  I did get a new Netgear router and feel like it with the printer went haywire since that time. When I open the info from device printer, everything that says 'unknown' and the connected wireless printer has a status of research.  I renewed my lease DHCP status under apple > system prefs > network > advanced > TCIP, it did not work. I deleted the printer and has attempted to add once again but ended up renaming and this printer icon is different.  After adding it and a manual ip address are now under network search it permanently as the intellectual property and prints never... Help, please. I feel like I just need to somehow remove all printers and start all over again.

  Thank you very much!
  Kasia

  Well Yes, restart more is a good idea.

  First of all, on the front panel of the printer, go to Settings [Scan] > WIreless > default settings.

  Then, on your Mac, reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!

  If you have the right software for 10.6 (not on the CD, by the way), open Applications > HP > C4700 series > printer setup and software.  Run it.

• HP photosmart C4180 error message

  I get the error message REMOVE AND CHECK CARTRIDGE on RIGHT, I removed and cleaned and re-installed but no change. It is not printing

  I'm sorry that you are experiencing this issue. Here is a link that can help you with the problem.

  http://support.HP.com/us-en/document/c01650872

  Have you changed your cartridges lately?

  Re-installing your software and drivers will not solve the problem. It is a hardware problem with the printer itself?

• Photosmart C410 [6396F5]: Ipad recognizes my HP printer, and then displays an error message

  The printer is recognized, but displays an error and does not print

  Hello @PastorBetts.

  Welcome to the HP support forums.

  I understand that when you try to Airprint for your Photosmart C410, you get an error message.

  I would like to help.

  What is the error message you get?

  Here are some generic troubleshooting steps from apples web site.

  If you can't print to your printer AirPrint

  Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."

  • On your iPhone, iPad or iPod touch, check that your device uses the latest available IOS and the app that you print from is up to date.
  • On your Mac, use software update to update to OS X and applications that you have purchased from the Mac App Store.
  • Check with the manufacturer of your printer to see if the firmware updates are available for your printer model.
  • You can connect an AirPrint device to your network, either by bypass surgery or a direct connection to your Wi - Fi network.
  • AirPrint devices connected to the USB port on the Apple AirPort base station or Time Capsule AirPort use AirPrint. If your printer includes AirPrint, connect it directly to your Wi - Fi network or Ethernet LAN port on your Base Station to print wireless.
  • After turning on your printer, wait a few moments before trying to print. Some printers may take a minute or two after power to join your network.

  You will also find useful information in the following document.

  HP wireless printers compatible AirPrint - print on a wireless network with Apple AirPrint FAQs

• Photosmart HP 6520: HP Photosmart 6520 - error message when you try to use the apps

  I can't access is more apps on my Photosmart HP 6520.  I get the error message "error connection server - 1".

  I don't know if this problem just since I recently changed from a Windows PC on a Mac.

  I very rarely use the apps, so I don't know when it started.

  Everything else seems to work very well I would say.

  Can someone please tell me what could be the cause, or if there is something I can try to sort it out?

  I seem to be going round in circles, and I can't work on what is happening.

  Thanks for your help.

  Hey @TraceyMac,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you are unable to use the pads (Print Apps) on your HP Photosmart 6520 e-all-in-one printer.  I want to help you with this.  A recent installation of printer would not affect your performance of platelets but no loss of connection or wireless Web services could be a factor.

  Note that to access the applications and their use from the front panel of your printer requires two ingredients to be successful: 1) Wi - Fi connection and 2). the ePrint feature (webservices are enabled).

  • Touch the wireless icon () on the front panel of your printer - is the printer connected to your wireless network?  (If not, run the wireless configuration wizard, select your network name/SSID and enter your password wireless reconnect).  If you are connected, proceed as explained below.
  • Tap the icon of webservices/ePrint () on the front panel of your printer.
  • If webservices are not enabled, press OK in order to enable them and allow the automatic updates of printers.
  • This will cause your printer to print an information document describing the characters before @hpeprint.com your printer (ePrint address).  This is known as the claim code.  As another way to use printing applications available for your printer, you can sign in to http://www.hpconnected.com to program applications printing to print and review all the content that ideally will reappear on the front of your printer.
  • From there, you can click the devices tab and use the claimcode to add your printer to the site and take advantage of the available applications, it.

  If these basic steps to respond to a resolution, please, try the following:

  When users encounter this type of problem in general, I suggest from scratch with wireless printer, webservices, and apps printing configuration.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • Front panel of the printer, arrow down and select Tools
  • Select restore default

  Then touch the wireless icon, run the Wireless Setup Wizard to restore your network connection, and then tap the Webservices () and reactivate your webservices.

  If you are able to successfully reactivate your webservices, tap on the icon of your printer wireless () and make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  No none of the suggestions above restored the functionality you're looking for?  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• Photosmart HP 7520: 10 Windows Error Message update for HP 7520

  Daily I get this message. This message started when I got a netbook XP approximately 1-1/2 years he is a. I was hoping that this message would have disappeared when I bought my new laptop running Win 10, but it didn't. I don't even have anymore of this printer.

  « Il problems were installing updates, but we will try again later. If you keep to see this and you want to perform an Internet search or contact support for further information, this can help:

  • Hewlett-Packard - hardware imaging, on the other - Null Fax - HP Photosmart 7520 series - error 0 x 80070490

  • Hewlett-Packard - hardware imaging, on the other - Null Print - series HP Photosmart 7520 - error 08024200 b ×"

  Until now what I was doing. I went into Device Manager, printers, and I uninstalled it. Then I went into settings, equipment and removed from the appliance.

  Upddate messages still appeared.

  In Device Manager, I noticed 6 unknown devices listed. When I went in their properties; events; There are mentions making reference to 7520 printer the latest in yesterday something on the installation of the printer. Should I uninstall these too?

  I do not know why this error message won't go away since I have no more of this printer.

  Helen

  Hello

  You simply uninstall the unknown device and the issue of the update of Windows no longer is, it's a reminder of the printer:

  http://support.HP.com/us-en/document/c05214529

  Kind regards

  Shlomi

• PhotoSmart Premium C310: Premium C310 printer Error Message

  PhotoSmart Premium C310

  New ink, etc.

  Printer error message: 0XC19A0041

  -What does this mean for the future of this printer?  Is dead, or can it be restored?

  Help!

  Gail50

  Hi, my advice would be a new printer.

  8lives

• Photosmart Premium C309: Faulty Error Message prevents printing.

  4-5 years used as stand-alone Copier only - NOT connected to a computer.  Was working fine, but 2 months ago got the error message "load paper into the main tray ' although the right type paper and the amount is loaded correctly.  Message and flashing lights must be cancelled manually.  Monitoring troubleshooting instructions re: loading, jams etc exactly as HP comes with paper unit.  Best Buy, a retailer, n 't printer repairs.  I followed the instructions on the page re HP online support: cleaning of the rollers - power of EXACTLY, but still does not print because the paper tray think is empty.  HP says they can't stand any more of this product.  I know that these printers are cheap these days, but it seems a waste just throw something out when the solution is perhaps a minor (but unknown!) fix.  Any ideas anyone?

  Hi @RLE41,

  Welcome to the community of HP,

  I understand your Photosmart Premium C309 gives you an error "on paper" and the printer does not pick up paper.

  Looks like you have exhausted all troubleshooting solutions available for this issue. All I can recommend is to contact HP telephone support to see about a replacement or upgrade.

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

  Good luck with your printer.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• Photosmart 5520 impression is more the MacBookPro - error message

  Hello

  Brand new Photosmart 5520 was print wirelessly from all devices in our home for a few days. Then we started to get the error message

  /Library/printers/HP/cups/Inkjet8.driver/Contents/MacOS/Inkjet8 failed

  I tried to uninstall and reinstall the software - no luck. When I print a test page, it works perfectly. But when we try to print now, she keeps poster "Looking for printer", then the error message.

  Any ideas? Frustration is now clouding lucidity...

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

• Photosmart C5180 using Windows 8. Error message = Z:\is is not accessible - the handle is invalid

  I just bought a new computer with Windows 8.  I loaded the software for my Photosmart C5180 all-in-one printer.  It seems to print fine but when Itry to read a memory card I get an error message: -.

  Z:\is is not accessible - the handle is invalid

  Hello numuc95.

  I guess that the printer is installed network? Have you tried to install the printer with a USB cable? This seems to work best for access to the card reader.

  If you can not install with USB, look at this link to see if it helps:

  http://support.HP.com/us-en/document/c00149194

  I hope this helps.