HP Photosmart eStation C510a

Similar Questions

• Photosmart eStation c510a: My zineb EXPLODED!

  I have a HP Photosmart eStation c510a aio with the removable "ZINEB" tablet. The Zeen has not lived up to its hype and seems to have been abandonded by HP. The Zeen is rooted in my aio printer to load and is customizable to show news/weather/emails, etc. Last night, I heard a shot, came into my office and concluded that the Zeen tablet had cracked open around it is sewing and fell from the printer on the ground. I don't know if the sound was the open pop Zeen or hit the carpet. Physically, other than to be partially open, the Zeen is fine. However the Zeen is the control panel of the printer, and now I can't use most of the features of this printer. What should I do? I took the printer off my credenza and plan throw away, give up the HP and get a Xerox WorkCentre 6027NI. I was loyal to HP for decades, but think that maybe it's time to change.

  @dp77449

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).

  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.

  Thank you for visiting the Forum from HP Support.

• My printer of estation C510a there some Apple software?

  I continue to receive notifications to install the update software Apple 2.1.3 ~ is that what I'm supposed to do? My laptop is HP dv4-2105dx & my printer HP photosmart estation C510a. Please advise!

  I asked this question even in the discussion of Notebook software & got my answer.  The person who answered said that I probably had some Apple software, if I had QuickTime or iTunes.  Didn't know that Quick Time was Apple.

• Apps print does not print with eStation C510a. Draws thin line at the top of the page.

  My C510a eStation printer does not print using printing applications.  Only, it prints a thin line at the top of page.  Everything works fine until I feel.

  All other functions seem to work.  It prints computer via WiFi.  It prints when I send an email to it.  It copies via the Zeen.  It does not print using printing applications.

  Does anyone else have this problem?  What is the solution?

  2010-12-23 15:00.  I just got got off the phone with a HP engineer.  She said that the station is still in TESTING phase and to call to report problems, allowing them to improve the product.  (I thought that the product would have been fully tested before being released to the public!)

  She had me reset the zineb display by pressing the volume keys during power on.  This erases everything that had been done on the Zeen by me and gave rise to no HOME screens, which will need to be implemented by me.  The only application at the bottom of the blank home page was Yahoo!.  The app of the printer was still missing.  I had to move the tray app home page.  Now, I have to spend hours, once again, setting up the Zeen.

  After the reset, the printer apps seem to work now.  The Zeen will copy by using the application of the printer.  My computer seems to still be able to print and scan to/from the station.

  The printer station eStation C510a and zineb display are very exciting.  However, they are not for someone do not want to spend the time necessary so that it can work properly.  If you have a cell phone, be prepared to use a lot of minutes while on the support.

  The HP engineer said that soon will be a new version of Android on the Zeen enabling it to be faster.

  Note: I've updated the original post with new information.

• Photosmart eStation C510 does not print

  Hi my (?) Photosmart eStation C510 printer does not print! I checked all settings changed ink cartridges, it will print a color image, but it will not print black and text is missing from the photo - I cleaned the printheads three times. I found the 'helpline' inaccessible HP and am pretty much scream of rage and frustration. I don't understand why it will not be printed. Printing ink level indicator is not telling the truth because I replacead all the cartridges this morning and he said one of them is half empty! If I see another white page out of this printer I'll cry! I guess it's maybe that black ink nozzle is completely blocked - it's the only thing I can think. Other peoples encountered this problem? and Yes, I restarted, six times

  You both seem to have some problems with printing caused by your print quality.

  Suzyd (and I would like you to try this too, CPilenza), I recommend do you a similar process that is Cipelenza. I would like to open your machine and remove the cartridges and print heads. Then unplug your machine while it is still open. Then use a fluffy cloth (like a coffee filter) and little water to clean the contacts on the back of the printhead (the bumps in copper). Then clean the contacts inside the machine. So shut up and plug it / turn it on. Replace the printhead and cartridges in order ask the machine.

  Sometimes, if the print head is damaged, the part will be replaced.

  The two of you run this software to diagnose your hardware: http://support.hp.com/us-en/document/c02762272

  Let me know the results.

• Cannot save with eFax on printer eStation C510a

  When I try to record with eFax on my eStation C510a printer, I get the message "unable to get a fax number.  HP support has not been able to find a solution to this problem.

  Does anyone else have this problem?  What is the solution?

  12-29-2010 09:10

  I just tried to sign up with eFax again and it worked!  He gave me a FAX number and my email address has sent a confirmation e-mail.

  I had thought that it me limited to 20 entrants and 20 outgoing faxes each month.  It turns out that these are 20 PAGES incoming AND outgoing of 20 PAGES each month.

• Impossible to get ipad, iphones to print using wireless on Photosmart estation e510

  I have a photosmart estation e-510 and I'm trying to get my assortment ipads, iphones to print wireless using this printer.

  I downloaded the iprint applications, and I have the function working on the printer wireless. Apple products will not recognize the printer. I use a router dual-band.

  I looked on the forums, on the HP website to no help.

  Any help would be appreciated

  Bob

  Let's start with a reboot of the router.  Pull his plug for a few seconds, reconnect and wait for it to start.

  So who disobeys, restart your printer and your iOS devices.   Make sure that all devices have the latest firmware.

• HP Photosmart eStation c510

  I am looking for a new printer.  I have a HP Photosmart eStation and it must be the biggest waste of money I spent.

  I'm looking at an HP OfficeJet Pro 8600.  But my p [problem is I won't be in the same mess I am with the eStation.]

  I print a lot of documents, as I am a seller on eBay.  My priority is the life of the cartridge and the cost of replacements.

  Can someone give me advice on if I'm going in the right direction, or if I'm not point me in the right direction?

  Thank you.

  Here a link to a page that discusses how the yields of ink are measured with HP printers.  It will show you the 5 standard pages used in this test to measure. Ink using the Officejet 8600 is the 950 and 950XL.  Here is a link to view the price and watch the overview for the black cartridge 950 XL. Officejet printers are great for small businesses and also clear and precise output products. I hope this helps you make your decision.

• HP Photosmart eStation e-all-in-one printer - C510a print Yellow!

  Installed new cartridge, cleaned heads and still yellow!

  The printer has worked for five 5 months without any problem and has been used for about a month after it happened:

  Cyan and yellow does not work, a clean head got cyan to work. But the yellow is still not working even after than install new cartridge and 10 + head cleans.

  Even tried to manually clean the heads with rubbing alcohol.

  What can I do else?

  Well... I resolved myself.

  Here's what I did:

  Removed cartridges

  Removed print head

  Place the printhead in the alcohol to friction for an hour

  Dried head

  And assembled the printer again and everything worked.

• Photosmart eStation C510: I have a Photosmart eStation C510 series with a print head problemo

  Error message indicates that there is an unknown problem with the print head.  When I went to the customer support told me that this model is no longer one of HP services

  Welcome to the community @mickster71 HP

  I wanted to reach out to the issue you are having with the print head on your printer Photosmart C510. See the link below to see if these measures can help the issue. If this isn't the case, then looking at needing a new printer. You can call the phone support to see what are your activities in the options if this happens.

  'Ink system failure' or "0 x... "Error code is displayed

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• HP Photosmart estation C510 on Windows 7 scan but will not print

  I have a HP Photosmart C510 Windows 7 Home Premium 64-bit-based station.  I moved our office where she operated 2 months ago very well.  I can't send a print job to the printer and it reads print but is just idol.  I can scan a document very well.  I loaded and unloaded the software 4 times.  I bought new ink cartridges and install them as well.  I removed the print head and cleaned it and the contacts at the back. I tried the diagnostic tool at least 10 times, and everything indicates that the printer is ready and no problems found. I tried troubleshooting on windows and it shows the status is fine.  I used the HP convenience store and status show ready for use.  I checked the Device Manager, and no abnormalities.  I spent at least 20 hours on this forum, try to find a solution and try each and everything I could find that still resembled a possible fix.  Before I throw this machine on the street, I would like some help that I paid a lot for the machine, but I have to be able to do more than scan with it.  I read a lot of many post of some truly smart people then you are my last hope line.

  I understand now.  Would you be interested to try a full reset which should put this in 'as new' condition or you have done that already?  There is nothing that is in any document on the internet and I will have private message it you if you want to try it.

• eStation C510a Zeen problems-broken Scan & Apps does not print

  I have 2 new problems with my zineb:

  1. we will not analyze on an SD card.  It will preview the analysis but the locks upwards when you press the scan button.

  2. Printing apps won't work.  They eject a blank sheet of paper.

  3. still no sign up with eFax.

  Anyone else having these problems?

  HP Support AGAIN to me to do a hard reset on the Zeen by power off and then turn on the power while holding down the two volume buttons.  This allowed again my zineb lose all settings, including the home screens.

  After the reset of long-term, zineb on SD card scan works now and print now print correctly on paper.

  eFax still does not work.

• Estation c510a: replaced C510 printhead to no black printing, now it does not print anything!

  A few weeks ago, my printer started printing black as a very light gray. I replaced all cartridges, removed the print head and tried to clean the contacts on the back. From advice on the HP website here, I bought a new print head. Just installed and reinstalled the fundamentally new cartridges. He gave me that a message about old print cartridges may not have enough to complete the new initialization of the print head. I just rejected because the cartridges are fundamentally new (XL version, no less).

  Now, the printer does not print anything. He's not even trying. Zineb screen shows he gets something to print, but it is just there to always say "now printing...". "without actually doing anything. There is an occasional (perhaps every 10 seconds) inside the printer, the noise that resembles something moves back, but it never attracts any document.

  As far as I know, HP has decided that without cartridges NEW NEVER OPEN, my printer is now a brick with a shiny new print head $85.

  Yes, I tried to copy with the same results.

  Help, please. I really want to spend a different $70 on new cartridges and lose the new game that is already there!

  Hi @skills4lou,

  The printhead you bought must carry a parts warranty. I'll send you a PM with some information to help. If you are unsure how to check your PMs, here is a post that can help - How to check your messages.

  If it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

• Photosmart estation doesn't copy. prints a black page. any suggestions?

  Printer is not copy but it prints everything from the computer. Copying out a page full of black. Any suggestions on how to fix this?

  You may not be able to solve this problem.  Try to scan and see if it does the same thing.  If so, then the scanner lamp is out, and you need a new printer.  If not, I'll see what I can find.

• Photosmart estation 510

  Zen station connects to the wireless network but is not connected.

  I'm not going to lie the C510 can be a pain to make it work, but once get you it working, it's a good printer.  The network connection is normally one of the most difficult things to operate directly, but this document should help a lot.  If it's just the Zeen giving you trouble, try also this document .  Let me know what happens.