Photosmart eStation C510: I have a Photosmart eStation C510 series with a print head problemo

Error message indicates that there is an unknown problem with the print head.  When I went to the customer support told me that this model is no longer one of HP services

Welcome to the community @mickster71 HP

I wanted to reach out to the issue you are having with the print head on your printer Photosmart C510. See the link below to see if these measures can help the issue. If this isn't the case, then looking at needing a new printer. You can call the phone support to see what are your activities in the options if this happens.

'Ink system failure' or "0 x... "Error code is displayed

Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

Contact HP:
Step 1. Open the link: www.hp.com/contacthp/
Step 2. Enter the product number or select Auto detection
Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
Step 4. Scroll down and click on: contact HP options - click Get phone number
File number and phone number appear

Tags: HP Printers

Similar Questions

  • HP Photosmart Plus B210 Series does NOT print black

    I use Windows 7 to print to the printer HP Photosmart Plus B210 Series. The black cartridge has been listed as half full, but I installed a new black cartridge with no improvement. I selected the clean and align the print head, but the printer prints only the color inks and not black. I checked the vent of the cartridge on the black ink cartridge, and it is clear.

    Any suggestions?

    I have completed the troubleshooting steps and nothing fixed the problem. I even followed the instructions for soaking the printhead for 10 minutes in hot water. I guess that the printhead has gone bad and needs replaced. Thanks for your help.

  • Photosmart premium 3-in-1: Incompatible print head

    I recently changed the black cartridge on the 309 a. When I replaced the cartridge, an error message came "Incompatible print head printhead installed is not intended for this printer or is damaged"

    I've never had a problem before. I went through the process of cleaning the printhead etc., resettled, but he still has the same message.

    I've never had a problem before when you change an ink cartridge.

    Ideas to solve this problem or do I just throw

    Hi @Phil309a

    Best regards, you should be able to buy a print online head shop part of HP...

    https://parts.HP.com/hpparts/CountryChoice.aspx?mscssid=&CCODE=ZZ&lcode=ZZ

    http://support.HP.com/us-en/document/c01794817

  • Have a disorder of the function with the printer officejet J6480 all-in-one of analysis.

    I have a problem to use the scan and copy function.

    The result is a black image dark without texts even configured to scan as a PDF under Windows 7.

    It is even when you use the function "copy".

    Hello vtcy

    It doesn't seem to be a problem with the scanner itself because the copying and scanning are performed. The links below are for the abandonment of the warranty support options and the program of HP recovery. It may be useful to negotiate in some credit to acquire a new purchase of course that if you really like your printer, you can get a repair.

    HP out of warranty of the Support Options for selection of printers HP

    HP trade-in program

  • Hi, I have a sony vaio cs series with windows vista home premium 64-bit.

    any help is appreciated very much!

    There is a problem with my laptop screen
    inside, a line (2-3mm) keeps appearing / reappearing every 2 seconds.
    the line is a reflection of the top part of my screen.
    for example, now I have my mozilla open, then the line down flashes the upper part of a mozilla window.
    I tried print screen to show the line. but the screenshot won't capture it.
    Help, please! It's very distracting... There is a problem with my graphics card?
    my laptop isn't even that old (3 months)
    Thank you very much for reading!

    It is still under warranty.  Talk to Sony, it looks like a graphics problem.  They will have to replace the motherboard if the graphic chipset is integrated.

  • I have a Photosmart Premium all-in-one c310 printer. It will not print black.

    I tried changing the cartridge and still no black.  I also get an error message when I try to align the cartridges.

    Nothing special, just alignment cartridge error.  Any ideas why my black will not print

    It seems that some of the old black ink can be dried in the ports of the printhead from the C310, nyart12020.

    There are a few steps to help solve this problem in the document below:

    http://support.HP.com/us-en/document/c02187415

    The document led to replace the printhead from the C310.  That's when we could use check whether the printer is IN or out of warranty.

    In case of warranty, then call the HP Technical Support on this printer.

    If outside warranty, then you have two options:

    1. You can buy the print head for a printer C310 from the HP parts store by searching for the CN642a part number.
    2. We can try a step not sanctioned HP to attempt to manually clean the printhead across a dipping process.  Information for how to do this can be located underneath:
      http://h30434.www3.HP.com/T5/other-printing-questions/HP-6500-Office-Jet-E709a-black-printer-cartridge-HP-920-not/m-p/447545#M28623

    I hope this helps.

  • Photosmart C4580 all-in-One - color print is not true

    Regardless of the software application in use, our printer does not print the colors on the screen. We have worked through all the settings and the types of paper and color choices, and nothing seems to make a difference. Tonight I prepared a certificate using PowerPoint and one of the predefined themes - nice blue background prnited on a Brown dirty. Ideas, suggestions, etc.?

    Hello there Hermits2,

    I saw your post on the issue of "print quality" you have little matter where you want to print from your Photosmart C4580.

    I understand that you have already tried several troubleshooting steps however, browse the guide below and if anything that you have not yet tried, try them. The print heads could very well be on their way if do not help the steps. If this is the case, then I would say calling HP support to see about a trade in option for you.

    Missing colors in printing

    If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

    Have a great Monday

  • Photosmart 210 a: won't print black after installing new print heads

    Hello, I bought and installed a new printhead. It will print color but not black.  They were all new cartridges when the print head went down.  the tools to say all the cartridges are full, please help.

    Hey there @LMACE!

    Thanks for posting on the HP Forums!

    I see that your printer is not printing black once the print head had been replaced.  I would be more then happy to provide you with some suggestions that can make things work again.  The first thing I would suggest is to remove the cartridges and printheads the printer and manually clean the electrical contacts on the printhead and the printer.  It is possible ink sprayed on the copper contacts causing a bad connection, when the new print head has been installed.  If the printhead is not getting a good connection, you may notice messages on the printer error and poor print quality.

    To clean manually the printhead in the B210a Photosmart click here: manually clean the print head

    If please, after back and let me know how it goes!

  • Photosmart 5515 does no black ink print

    Not printing in black at all.  Full set of new ink cartridges.  Warranty is just exhausted.

    I've tried everything here

    http://support.HP.com/us-en/document/c03425035

    like everyone else I had read had this problem. No change.

    Any help out there?

    Seem to have solved.

    It was a clogged print head - probably due to the ink drying during the period of non-use.  Cleaning process all waste ink without much effect.

    Print head is not removable so manual cleaning is tricky.  Just wipe the filter did nothing.

    At the end of the day, slipped a piece of kitchen under the print head roll (it has a Groove where it will adapt and you roll the head top) folded.

    Removed the rubber around the offending ink filter washer.

    Slipped a long and tight fitting top pen top instead (felt tip seems best - but open at both ends, one tube, is what it takes, and it must be a tight fit).

    Refill pen with mouthwash (appropriate cleaning fluids are available, alcohol is the key it seems).

    Breath down on pen force the liquid through the printhead on paper towel.

    Printed later, but took a few prints to become completely clear.  It is time that clean the printhead automated may operate.

  • Photosmart eStn C510 series is not a driver error

    Sometimes my wireless printer works fine, but other times it is 'offline' when I try to print and when I troubleshoot I get error: eStn Photosmart C510 series is not a driver.  I reinstalled the driver from the CD and I also downloaded the driver from the HP website.  It will work fine for a while, but then it disappears.  I do not understand why and I would find a permanent problem solution so that I can simply print and don't have to waste his time to solve problems all the time.  Can someone help me with this frustrating problem?

    Hi JeanneDiffenderfer


    1. what operating system is installed on the computer?

    2. do you get errors in the device to the printer Manager?

    I suggest you to check and to provide us with the information about the installed operating system.

    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running


    Also, you can use the HP available for printing and hardware diagnostic utilities and check if this may help solve the problem-

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=5041262

    http://h10025.www1.HP.com/ewfrf/WC/document?docname=c02073861&LC=en&DLC=en&CC=US&OS=4062&sw_lang=

     

    If the problem persists I would suggest you contact the manufacturer for help support and to check if they can help you get the correct drivers installed for the printer and help solve the problem.

     

    I hope this helps.

  • I have a new HP Photosmart C311a 7510 with trouble printing envelopes.

    The 7510 does not print the addresses directly on envelopes. I took care to put the envelopes in the tray that does not seem to be the problem. In my view, returning the envelopes (duplex printing) before printing the cause of the problem with the alignment. Someone had this problem and that this is resolved the problem.

    Another issue I have with this printer is the delay of printing (ink drying). My Photosmart C7280 is a duplex printer and ink drying question but when you printed in draft mode it does not pause to dry ink. This 7510 a break time yet when printing in draft mode, which makes the dismal printing speed.

    Operating system is Windows 7 Ultimate. No change since the installation of the printer.

    Hi bill78759,

    You must change the driver settings when printing envelopes so that the duplex option is turned off. The C7280 printer used a different mechanism of the impression that the 7510. With the new type of ink used in the new printers, it will always take the printer pause before removing the paper in the printer. This time is essential, so that you get a print with print quality.

  • Have Photosmart Premium C310a. Ongoing problem to the loss of communication with the printer

    I have a HP Photosmart Premium 310 Ca and am running Windows XP.  About every month my computer loses contact with the printer.  The network works fine as is my email.  I tried restarting the computer, reset my router and the Setup error following to get instructions from XP. I tried to reinstall, and I can't seem to install.  I'm tired of this!

    I'm sorry that you are having this problem. There are several steps you can take to help your connection problem. First of all, when the printer is connected to your network, print a Network Setup page. On this page, use the ip address of the printer and that type in the address bar of your internet browser on your computer. Will take you to the server of the web integrated printer (EWS). Look for the Networking tab change the automatic ip addressing to public static ip (manual). You will then enter the ip address of the printer, followed by the subnet mask, and finally the default gateway, the info that will be on the Network Setup page you printed. Below, you'll assign 8.8.8.8 and 8.8.4.4 as the primary and secondary DNS. Who should manage the intermittent connection loss problems. With automatic addressing, the printer can request a new address whenever there is a network problem, which confuses the printer. Static IP or manual addressing, is tackling this problem. Let me know if it helps.

  • "HP Photosmart all in one single 7510: print greeting cards 5.5x10" on hp photosmart 7510

    "Unable to understand the print size of greeting card size full page stock measure 5.5x10.

    Hi @artdahlink,

    Thank you for joining the Forums of HP Support!

    I noticed that you are unable to print a 5.5 x 10 greeting cards on your HP Photosmart 7510 e-all-in-one printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I understand the frustration you feel. Please see the Specifications of printer for HP Photosmart 7510 e-all-in-one printer series.

    Maps:
    Card type / size chart

    • 3 x 5 Index / 76.2 x 127 mm (3 x 5 in)
    • 4 x 6 inch Index / 101.6 x 152 mm (4 x 6)
    • 5 x 8 Index / 127 x 203.2 mm (5 x 8 in)

    NOTE: According to the specifications, this printer does not accept a 5.5 x 10 (cards).

    There is no guarantee the implementation of a custom paper size to work, however, you can try this method

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • All-in-one Photosmart HP 3310: colors may not print correctly on A4 photo paper.

    My HP 3310 printer gave me great prints for many years, but during the last 12 months, 210 x 297 mm prints threw a desaturated look and brightness has dulled as well. My photos 10 x 15 cm print perfectly.

    I did all the recommended suggestions, cleaning of the print head, aligning the printer even restore to factory default to no effect.

    I use Spyder Pro 5 to ensure that I have the exact colors on my screen.

    I printed via the printer settings and also the settings of Photoshop.

    At the present time, all my photos contest must be overexposed and strongly saturated for previously appreciated results.

    I only use HP photo papers and real HP363 inks.

    I hope someone can put an end to my frustration.

    Welcome to the HP Forums @-g_s70

    I came across your post about the problem you are having and I wanted to respond to help with my suggestions. Please see the guide below to resolve this issue. If the problem persists after resolution of the problem, please try to call the hotline to discuss replacing the printer or the rating of. I'll include contact info HP below to directly reach.

    HP Photosmart 3100, 3200 and 3300 Series all-in-One - the printed colors are not colors should

    Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

    Contact HP:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number appear

  • New HP Photosmart 7520 e-all-in-one printer from the box, removed the tape and cartridge access

    I have a new HP Photosmart 7520 e-all-in-one printer just out the box. I removed the tape and cartridge access door does not open more than 40 degrees. The figure represents about 80 degrees. I'm afraid to force it. I can't put new cartridges in the printer. Very frustrated trying to get help. It doesn't seem to be a phone number or Web site for direct assistance. HP has really gone down hill. Help!

    Hello

    Mine is about 45 degrees, sufficient space to install the ink cartridges.

    Kind regards.

Maybe you are looking for

  • Websites blocked due to security settings that I did not go to Yahoo Games

    I played Yahoo Games for years. About 3 days ago, they failed to load. When I asked about it, I saw that many other people had the same problem. So I waited. "This morning I tried to enter one of the games and got: blocked due to security settings Ap

  • Internal card reader card ZBook 15 SC

    I wonder if someone can provide specifications or information about the speed of the SD card on my new ZBook 15 reader. I use this for work and want to have a removable device to store personal files. I am currently using a 32 GB SD card, but it isn'

  • Pavilion 23 -: black screen

    I got an error message - driver error - restart. When I tried to reboot, I got a black screen after the HP logo.  I tried f8, f12 etc., trying to find troubleshooting mode with no luck. I have a USB to recovery, but I don't know how to get the comput

  • Configure the DHCP on the router and switch

    Good afternoon I'm trying to set up DHCP using CLI on a 2610 router and switch 2950.  With my current config, the host at the end of the switch (set to receive ip via DHCP) does not have anything assigned.  Here are a few shows: Router: Router_1 #sho

  • Smartphones Compatible blackBerry charger

    Hello can I use the BB9300 charger 3G to my BB9900? Please advise! See you soon!