HP Photosmart Plus B210 Inkjet8 has no error Message

Similar Questions

• New ink print head error on Photosmart Plus B210 alert

  My HP Photosmart Plus B210 printer has suddenly started giving me the following error message:

  "New alert ink print head.

  Used cartridges may not be not all print head start.

  Install the new cartridge or press OK to continue with those used. »

  It was new HP brand cartridges when I installed them. I printed earlier today without any problems and did nothing for the printer before the error.

  (I use a 32 bit Windows Vista OS on my Dell Inspiron 1525 laptop and am printing via a wireless router.)

  -What it means and how to fix it? When I try to print, it just says: "print" on the touch screen but nothing prints ever and when I try to stop it, it freezes and I have to unplug it.

  Thank you!

  First try printing a self-test page.
  1. click on the setup of your printer
  2. choose reports
  3. click on the status page or printer self-test report

  Here is another link that can help you with the cartridge.

  http://goo.GL/gudAL

  Let me know if this can help, thank you.

• HP Photosmart Plus B210 Series does NOT print black

  I use Windows 7 to print to the printer HP Photosmart Plus B210 Series. The black cartridge has been listed as half full, but I installed a new black cartridge with no improvement. I selected the clean and align the print head, but the printer prints only the color inks and not black. I checked the vent of the cartridge on the black ink cartridge, and it is clear.

  Any suggestions?

  I have completed the troubleshooting steps and nothing fixed the problem. I even followed the instructions for soaking the printhead for 10 minutes in hot water. I guess that the printhead has gone bad and needs replaced. Thanks for your help.

• HP photosmart Plus B210 series - prints blank pages

  Hello, I got the printer above for about 4 years with no problems. He suddenly started printing blank pages. I went through all the cleaning cycles, alignment etc., but without success. I bought a new genuine HP print head and installed new cartridges and still once, it prints blank pages. The message I get is that alignment process has failed. Does this mean the printer is down and I'll have to buy a new one, or can you suggest a solution? I went through all the steps suggested for this type of printer on your forum, but I still get blank pages. It is a disaster for me and my wife whose work depends on the network printer. Any suggestion would be appreciated. Thank you.

  Hi @drbince,

  Given you have changed the print head and the problem persists, according to me, maybe it's time to consider a replacement printer.

  Alignment is a failure because the printer does not black. If you have followed all the steps in the following document, it might be time to give us a call to weigh your replacement options: HP Photosmart Plus B210 printer - color or black ink not print.

  If the problem persists, what you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number

  File number and phone number are displayed.

  If it meets your needs, please consider tagging this post as solved by clicking accepted as Solution below and others can find the answer more effectively.

• HP Photosmart Plus B210 pages come out blank

  HP Photosmart Plus B210 printer started printing blank pages. Seems to go through the motion of printing from word documents, but comes out blank. Printer did print a photo.

  Went to my CV charge and activated ink levels. Find the box HP here. Used align print head function. Printer has started printing text after that.

• Photosmart Plus b210 - intermittent wireless printing problem

  Hello world

  I'm new to this forum so I appologise if I'm a little ditsy...

  I just bought a Photosmart Plus b210 and have successfully connect it wirelessly to my iMac. However, since I got it, I had a problem when trying to print wireless from it.

  When I try to print from my iMac, it will open the print job request and it will say 'sign in' at the start, but then she stays like that for about a minute or two before, it says that there is an error. At this point, I have to cancel the work because he'll just try again and give me the same result.

  I found the only time wherever it prints is when he says "connecting" then after a few seconds it will say 'inactive' and only then it will actually print. So what I'm basically doing print, wait a few seconds, if there is no 'inactive' message I'll cancel the job and reprint the document, and follow this process until I see a notification "inactive." Once I am successfully able to print a job, it will allow me to print documents more first time but it is frustrating that I have to go through this lengthy process everytime I turn on my printer.

  Someone at - it from similar solutions/experiences?

  Thank you

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Apple is 10.0.1.2 a.200 use 10.0.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Photosmart Plus B210 do not print the Photo - Vista and 7 - USB tray and wireless

  Experts!  Help, please!  HP support by phone could not find a solution.

  I bought a new Photosmart Plus B210 last month.  I am a moderately advanced computer user and have not been able to print a picture of this printer, EXCEPT when printing directly from a card inserted into the machine.

  I installed the printer on two laptops, one running Vista, the other running Windows 7.

  The problem persists if printing wireless or USB.

  The printer works perfectly as this major problem.

  Thanks in advance for your help.  If I can't make this work, I'll have to return this printer and will likely purchase another brand.

  Carrie

  First of all, in vista - please turn off the printer, restart your pc and to clean the print queue and turn on the printer.

  Now, make sure you select the exect for the tray paper size, that the same for the type of paper and size when printing... now see if there is a difference.

  What about win7 - what do you want to see exectly? the option is grayed out? You may see other options to select related to it?

• Series HP Photosmart Plus B210: Connectionproblem iMac - HP

  Since I installed Mac OS X 10.10 (Yosemite) (OS x 10.8 Mountain Lion) my printer does not (always) enable to printing purposes. What should I do to make the printer work properly?

  When I stopped the printer completely for awhile (220 V, several minutes), the printer can begin to work, but not in all cases.

  Thank you

  A.J. van der Hout, Netherlands

  Hey @vanderhout,

  Welcome to the Forums of HP Support!

  I see that you have some problems with printing regularly from your machine Mac OS x 10.10 for the all-in-one Photosmart Plus B210 printer. I can help you with that.

  To start, make sure that the printer is connected directly to a wall outlet and not a surge protector. Once this is done, if the printer is connected to your Mac via a USB cable, remove it. If it is connected wireless network, turn the printer off and remove the power cord at the back of the router for a minute. When the lights come back on the router, turn on the printer.

  Now, let's try printing. If you were able to print quickly then the issue is related to the network. This document explains How to troubleshoot wireless connection with your printer. As a result of this document should help you identify why your connection issues.

  If the printer is still not printing on a regular basis then:

  1. Click on your Apple icon, system preferences and printers and Scanners.
  2. Hold down the CTRL key and click on the picture of the printer on the left side of the screen.
  3. Click on reset printing system.
  4. Open your utility Applications, file and disk utilities.
  5. Click on verify disk permissions. This should take about 10 minutes.
  6. Click on repair disk permissions. This should take about 10 minutes.
  7. Restart your Mac.
  8. If you removed the USB cable, connect. If this is not the case, click on your Apple icon, system preferences and printers and Scanners. In this window, click the icon 'more' in the lower left corner. Now, select your printer in the list. Click in the box next to and select your printer. Finally, click Add.

  At this point, you should be able to print. If this isn't the case, please let me know what happened following my directions and I will be able to help you further.

  Please let me know if this solves your problem or if you have any other questions. If not, have a great weekend!

  If it solves your problem, please help other users find this thread by clicking on accept Solution below my post.

  If you appreciate my help, please inform other users by clicking on the icon below my post thumbs up.

   

• Photosmart HP B210a more: HP Photosmart Plus B210 missing Scan software

  Hi all

  OK, Ive problems (two hacks, printer malfunctions, 1 disk repair, etc. over the past months) my Mac for the last two days, I restored Mac OSX 10.10.4 successfully and everything is well save for my printer as indicated above. I didn't know the usefulness was eliminated when I upgraded to Yosemite and it was hogging my CPU with a processing loop that was killing my Mac (I call her Alice!...)). So, I did get them all today my research on what went wrong with these processes which lead me to upgrade drivers Max OSX Yosemite and tried troubleshooting through:

  (a) installation of printers, their uninstall through the system preferences/printers and Scanners to verify that the drivers are there, I installed via the using field list driver HP Photosmart Plus B210, who can confirm print successfully without any trail of CPU (I uninstalled the HP before this point utility).

  (b) tried to get into the system preferences/printers and Scanners / where I chose "Scan" in the window of the printer and it says "SCAN SOFTWARE does IS NOT INSTALLED" (see attached printer screen)

  

  (c) I installed the driver in the development of window for HP Photosmart Plus b210 series that SHOULD allow the printer and scanner to work from my window System Preferences/printers and Scanners, I've lived more troubleshooting try to import a scan of the system of preferences/Applications/Image Capture and preview also. The two scan attempts to import sent the same message, lack of scan software when I tried via the printers & Scanner on System Preferences window.

  So frustrasting as she is, I set up a test on the printer to use the port MMC to scan an image of the window of the printer to the MMC card, that I inserted in the printer and it worked to prove that the software of the printer works on scan, but not directly with my Mac. Printing software is confirmed later, brings back me to my Mac and his missing scan software.

  This seems to be missing and appropriate drivers that should make the impression (works fine, no trail of CPU as before) as well as scanning (missing software problem). Does anyone know how I can fix this and if I need to download software drivers or anything please provide your console if necessary with links to what I need...

  Thank you all... I should have logged at noon instead of 4.30... I just might have gotten something else after you fix this problem...

  Try to update the software by following these steps:

  Click on the Apple icon, then select about this Mac.
  Click software update, and then click the Store from the top of the indicated window menu and click on reload the Page.

  Be sure to install any update HP or Apple, then check for the difference.

  If it persists, try manually install the package below. Tjen try to scan the image:
  http://support.Apple.com/kb/dl907

  If you're still having problems, try the HP Easy Scan application below:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Shlomi

• Since I have OSX Lion I can't print/scanning wireless more with my HP Photosmart Plus B210?

  Given that I've upgraded to OsX Lion my HP Photosmart Plus B210 stopped working corrctly.

  I uninstalled and reinstalled but ntohing worked.

  The report of the printer tells me that my printer is connected correctly.

  Have you installed using the installation disc?

  If so, make sure to install the Compatible Lion software below:

  First, uninstall completely any software installed:

  * Please note that the following steps will delete all HP software installed.
  1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
  2. Select Applications
  3 select the Hewlett-Packard folder
  4. double-click on uninstall HP application
  5 follow the uninstall to prompt to select a device to uninstall
  6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
  7 approve any prompt to uninstall all HP software.

  Then download and install the Lion software for your printer below:

  http://FTP.HP.com/pub/softlib/software12/COL39592/Al-96582-1/HP_Lion_Ink_SW_v12.13.24.dmg

  Please let me know if that helps.

• All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122.

  New error message to see article 871122

  All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122. That's happened? I used it last night to check my email, and then I deleted some photos on the disk hard and this morning it will not connect. I don't really understand what happened to him because it was off last night.

  Hello

  1. you are using a wireless connection?

  If you are using a wireless connection, I suggest you to update the latest drivers for the network adapter and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check this link for troubleshooting steps:
  http://support.Microsoft.com/kb/314095

  It will be useful.

• Screen saver has an error message preventing the opening

  Screensaver displays an error message prevents the opening. Help

  Hello Robert,.

  I would like to know some information about the problem so that we can help you better.

  What is the full error message when you say, "screen saver has an error message preventing the opening"?

  Thank you for details on the issue.

  I also know that the inconvenience you are experiencing due to problem of screen saver. I will definitely help you.

  This problem can occur because of incorrect or corrupt files of Windows power settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Create a new power plan and check the issue.
  Refer to this article:
  Change, create, or delete a power plan (scheme)
  http://Windows.Microsoft.com/en-us/Windows/change-create-delete-power-plan-scheme#1TC=Windows-7

  If this does not help, use method 2.

  Method 2:
  Run checker (SFC) of file system and see if it helps.
  Reference:
  Use the System File Checker tool to repair missing or corrupted system files
  https://support.Microsoft.com/en-us/KB/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• My HP officejet 4500 works very well on my laptop (my computer alone), but windows has an error message saying that the printer is not a dirver. How can I fix this message?

  My HP officejet 4500 works very well on my Toshiba laptop (my computer only and not shared) but windows has an error message saying that the printer driver.  How to stop this message?

  Visit the HP website and download the driver you need.

  Good luck.

• My Office Jet 6210 all in one printer has an error message is displayed. "OX805dcc31 1309:fm_interpre".

  My Office Jet 6210 all in one printer has an error message is displayed. «OX805dcc31 1309:fm_interpre the printer will not be closed off the coast (unless I unplug it), and I can not get the error message to change.»  Any ideas what I can do?

  It sounds like a code of 'asserting' firmware, something really bad happened - the most probable hardware problem.

• HP Photosmart B8550 printer Out Of Paper error message

  I have a HP Photosmart B8550 who insists on the fact that I'm paper little matter how much is in the main tray.  Whenever I try to print from my computer or just running test page, I get the error message "Out of Paper".   This problem occurred about two weeks after the expiration of the warranty of the printer.

  The last thing that he print with success was a sign of sale on fluorescent stock heavy.  I tried cleaning the rollers as others suggested online and found a few red residue, probably from the sign.  It does not have the printer works however.

  Someone else suggested to remove the upper plate and forcing a piece of paper through by hand to get it going again.  If I push a sheet of paper upward to meet the internal reels view and print a single page but it does not take any other paper on its own.  It just goes back to what the message OF PAPER.

  How is the document that is supposed to be pulled up to the rolls? Now that the top plate has been removed, I see an arm with two black rolls down on paper when PRINTING is affected, but they do not seem to turn. They just sit there for a few seconds and then back up just before ON PAPER will start to blink.

  Any suggestion or destroyed independent feeding mechanism? Is there maybe a sensor that is clogged?  If Yes, where is it located and how can it be cleaned?

  There is a document to find errors on paper on Photosmart 8000 series printers located here.

  If these steps do not fix the problem, then a hardware problem has developed in the feeding mechanism and your best option will be to replace the printer. Have you thought about contacting HP Support on the upgrade program?