HP Photosmart Plus B210e print is not on MacBook Pro running Lion and the use of Airport

Similar Questions

• My HP Photosmart Plus B210e printer will not print black ink, only gray/color.

  My printer HP Photoshop more faithful 210th has stopped printing in black ink last week. It prints color beautifully, but where there should be black it comes out just as gray or white spot. I have tried two new ink cartridges, cleaned print heads, reinstalled the driver, all to nothing does not. I tried to align the printer, but it gave me a failure message. Need help please, I desperately need to be able to print to school! I have Mac 10.8, so I couldn't do the online troubleshooting.

  -Very well, sounds like you might have clogged or dry print head. What I propose, is that you first use the Tools menu under Setup for clean print heads at least three times. If that does not improve the quality of your print (PQ) or if you already have gift which, I would say that you remove the printhead and clean the back of the cradle with a non fluffy cloth (like a coffee filter) and a little water. The section you want to clean will be triggered copper bumps where the printer makes electrical contact with the print head.

  If this fails, an unconventional way to solve the problem which has worked in the past:

  http://h30434.www3.HP.com/T5/other-printing-questions/HP-6500-Office-Jet-E709a-black-printer-cartridge-HP-920-not/m-p/447545#M28623

  Let me know how it goes and answer here!

  I hope that you have a wonderful week and I hope that the time where you are is as beautiful as it is here!

• Cannot get photosmart 5520 to print wireless from my Macbook pro

  Hi-

  I tried for more than a month to get my computer to print wireless, and I can't make it work.  It will print the test pages, but when I try to print anything else I get the message "Printing - the printer is not responding.  I deleted and reinstalled the software of the printer 5 times.  I restarted the printer again and again.   I downloaded and installed this: http://support.apple.com/kb/DL907 but I still can't make it work.

  I have a MacBook Pro running OS X 10.8 and an Airport Express router.   Please help if you can!

  Well Yes.  I highly recommend you uninstall - you don't really need it.  Use its uninstaller in Applications > Symantec.

• HP Photosmart Plus B210e Printing in problem of ink empty

  Two nights, my HP printer was big.  Yesterday morning, tried to print a document runs to black but nothing printed ink on the past.  Did not get the message "low ink".  Check the ink levels: all colors, including black were about 25 to 30%.  I was able to print in color, which is blue.  I unplugged my printer for about 30 seconds, reconnected and restarted my laptop.  However, does not solve the problem.  I have a HP Pavilion dv6-3230us laptop with Windows 7.  Another problem aside.  My laptop is about 2 years old and for about a week, I have beening to have another problem.  Having been on the laptop for about 30-40 minutes, it will turn off by saying that the laptop is trying to overhet [but I still ensure that the fan vents are clear]; so I called HP becaue it kept recurring for about 4-5 days; they had me download a diagnostic tool and conduct a test to make sure that HP and RAM were very good - they were; then told me to use the laptop as usual and call again if the problem persists.  This is still happening and I have to remind them once again.  But cannot understand what is happening on my is not printing in black ink.  any help is appreciated!

  Here is a link that can help you with the black ink cartridge print do not.
  http://goo.GL/KlEum

  You may need to replace the cartridges. Color cartridges blend to blend in the dark, to make a true black color. When the cartridges are low on ink, it starts to print quality problems.

• HP Photosmart Plus B210e but can't seem to connect to my Verizon Fios router

  I have the HP Photosmart Plus B210e but you are unable to connect to my Verizon Fios router which is an Actiontex M1424-WR.   The printer detects the name of the router and I enter the WEP key, but it does not connect.   The diagnoses listed without filtering status summary do NOT.   I connected to my router and checked that no MAC filtering is enabled.   I have two laptops which have no problem connecting to the router.

  OK, so a simple reboot of the router solved the problem

• My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  What can I do?

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• Direct Wireless does not not on Macbook Pro

  I configured my 2540 Deskjet via HP Setup and activated wireless Direct via the printer Web pages. The printer implements the Direct wireless network. On Macbook Pro, it appears in the list of available Wi - Fi networks. However, I can't connect to it: once I have selected the network, the Mac OS Wi - Fi icon in the menu bar displays the animation 'connection' for a few tens of seconds and stops finally with an exclamation point to report a problem.

  Tried with password or no password. Same behavior.

  Tried to disable IPv6 (in the HP utility that the printer has no user interface for this) according to the http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Wireless-Direct-not-working/m-p/4812403...  Still not connect.

  Tried a Macbook Pro 2011 and a Macbook Pro retina 2014, both running Mac OS X Yosemite 10.10.2,"limited nothing works.

  Mystery solved! The only thing I have not tried actually had to print... that works! Even though the icon from Mac OS X W - Fi still shows the animation 'connection' or the 'problem' exclamation point.

  Perhaps MacOSX fair signals that the wifi does not connect to the internet or the likes. The Wi - Fi connection itself works, also with password and with IPv6 active.

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I created a my page book epub file, and it works perfectly in ibooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  I created a my page book epub file, and it works perfectly in iBooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  What's not?

  You must check the iBooks category in your OS X system preferences: Panel iCloud: iCloud Drive: Options: Documents Panel. On iOS, you must have enabled to iCloud and in the iCloud Drive location setting iBooks. Also, in iOS parameters: iTunes and App Store, ensure that iBooks is running.

  The iBook.epub file is a compressed/compressed and renamed folder that represents a single file to any email client. What do you mean, it cannot be sent correctly - and it's your experience, send, or the failure of the recipient to view the ePub document? What email client?

• I updated Firefox on my Mac (10.6.8), and now the story is not known (that option is checked) and the back button will not work. Help?

  I updated Firefox on my Mac (10.6.8), and now the story is not known (that option is checked) and the back button will not work. Help?

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  You can also try to repair the database of places with this extension:

  • https://addons.Mozilla.org/firefox/addon/places-maintenance/

• My MacBook Pro runs very slowly.  I El Captain 10.11.4 rare apps on it, most are closed while I'm on safari.  My photos take a 125 gb storage capacity.  If that is the question, what external hard drive is recommended?  If not, what is?

  My MacBook Pro runs very slowly.  I El Captain 10.11.4 rare apps on it, most are closed while I'm on safari.  My photos take a 125 gb storage capacity.  If that is the question, what external hard drive is recommended?  If not, what is?

  Download and and publish a report of Etrecheck:

  http://etrecheck.com/

  Ciao.

• I have a MacBook Pro (mid-2012) with the audio jack single. Why not recognize it when I plug a microphone inside?

  I have a MacBook Pro (mid-2012) with the audio jack single. Why not recognize it when I plug a microphone inside?

  I use a splitter cable, and have verified meter that it is properly connected.  Also the microphone that I try to use the works when connected to a separate Recorder device, so I know who works very well.

  The audio output on a 2012 port does not support the audio input.  You will need to use the USB ports for audio input.  This will require an appropriate hardware and software.

  Ciao.

• I formatted and reinstalled xp to correct some problems and my multimedia audio and video vga drivers were lost. I do not have a CD with info and the Add Hardware Wizard cannot find the drivers. How can I fix it?

  I formatted and reinstalled xp to correct some problems and my multimedia audio and video vga drivers were lost. I do not have a CD with info and the Add Hardware Wizard cannot find the drivers. How can I fix it?

  You may be able to download the drivers from the web site of the manufacturer of the computer.

• My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner