HP Photosmart Premium 360 g, can identify my wireless network, but said the WPA is not valid

Similar Questions

• NB200 can connect to wireless networks, but cannot connect to the internet

  I could connect my Win XP netbook to my network wireless secured to the House, other networks and public networks such as the library and McDonald's. This week, I am away from home and discovered that while I can still connect to a number of different wireless networks, I can't connect to the internet with Internet Explorer.

  I had this problem once before and fixed by reinstalling Windows XP and all my other software. I have no idea why it happened again. I'm hoping for a less radical solution to the problem... ?

  Hello

  You can try to renew the IP address.
  Got to RUN and type CMD.
  This would start the console (DOS window)

  Here, you use the command: ipconfig / renew

  It s also advised to update the Wlan driver. I've noticed some problems with older drivers for Wlan
  Here you can get the most recent:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• HP Photosmart Premium - C309g and it stopped printing in black (but prints color)

  Hi my HP Photosmart Premium - C309g and it stopped printing in black (but prints color). I tried: -.

  1. print test page - empty outside the windows logo
  2. Turning the power on and the
  3. programs form printing.

  Both black cartridges are full.

  printer is 3 days on 1 year warranty!

  I'm not very technical, so easy solutions would be preferred.

  Thank you

  Try the solution in this thread to clean the printhead C309g.

• I bought a few years ago a Creative Suite Design Premium and when I want to record my serial number, your services say that the number is not valid. I am surprised because I have used it before on a PC computer that no longer works. I change my computer

  I bought a few years ago a Creative Suite Design Premium and when I want to record my serial number, your services say that the number is not valid. I am surprised because I have used it before on a PC computer that no longer works. I change my computer with a Mac.  You can check the number you customer service gave me, L. Fernandes: < num series kglad deleted >. I give you my phone number in Paris: < phone number deleted - kglad >. Best account. Chantal

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html

  p.s. This is a public forum.  the display of your phone number is a bad idea and display your serial number will get it banned (or used by someone else and will not you).

• When I click on my icon of firefox homepage says "the address is not a valid URL. The URL is not valid and cannot be loaded. How can I fix it?

  When I downloaded Mozilla Firefox and clicked on the Firefox icon I get this message on the Firefox homepage "the address is not valid.

  The URL is not valid and cannot be loaded. "I can always access the internet but what do I do to get rid of this message. The home page does not display the icon of firefox.

  You can check the setting of the homepage:

  • Tools > Options > general > startup: Homepage

  Firefox supports several home pages separated by ' |' symbol (pipe).

  • https://support.Mozilla.org/KB/how+to+set+the+home+page

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I brought my iphone at the Apple store for repair.  I'm back, but now the phone is not on my list iphone find him.  How can I add it in?

  I brought my iphone at the Apple store for repair.  I'm back, but now the phone is not on my list iphone find him.  How can I add it in?

  Tap settings > iCloud then slide downwards and press the find my iPhone then turn on find my iPhone .

• Equium A200-15I can't find wireless networks after recovery

  After making a recovery using the Vista CD from my computer (an Equium A200 15I) cannot find wireless networks. I went into the device under network adapters Manager and then there is realtek RTL8101 Ethernet NIC etc and in the other devices section it is Ethernet and controller of Stoeage of mass.

  I'm not really sure how I can get the computer to recognize and wireless networks, but I am aware that the driver is missing!

  Hello

  Try to update the wlan driver:

  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  You can also check for other drivers if it is not installed:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? I have also a certificate has expired and do NOT know how to get a certificate of update. ?  Please Help, I have NOT b

  I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? What this mean and how can I solve this problem? I have also a certificate has expired and do NOT know how to get a certificate of update. ?  Please Help, I have NOT been able to get help from any of these Issuea. Very frustrated. Please contact me by txt on my iPhone 352-257-9403 if possible. Thank you for your support

  iOS 9.2.1

  certificate is daily horoscope

  wwhat the devil is and why it has expired?

• After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• I have the wireless option, but if I use it not I can't connect to the internet.

  I have the wireless option, but if I use it not I can't connect to the internet.

  original title: difficulty borrowed from internet

  If it's the Acer utility, it is best to visit Acer support:

  http://support.Acer.com/us/en/default.aspx

• How can I set up Vista so that the PC does not switch to another window (for example the Spy Sweeper alerts) while I am playing a game?

  How can I set up Vista so that the PC does not switch to another window (for example the Spy Sweeper alerts) while I am playing a game?

  Vista is not in control of this technique. Spy Sweeper needs to have an option to control that. If this isn't the case, then it is badly programmed. Flight of focus (go to another window) when it is actually needed is a big no-no for the design. I find this option, if I were you :)

• I can delete, change and move all other profiles wireless network but one that reappears immediately after that I erase it.

  I have exactly the same problem in Windows Vista Ultimate Edition.  I can delete, change and move all other profiles wireless network but one that reappears immediately after that I erase it.

  I see that you asked initially that this issue in 2010.  Has there every been a resolution?
  Elliott
  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/network-profile-keeps-reappearing-and-displacing/515108df-1aa6-457f-9262-6be835f82198

  My Eureka has been using netsh, explains Superuser.com «How to completely remove a wireless network from Vista» Everything I found on the Microsoft site doesn't give any examples on how to find profiles (netsh wlan name) or the statement appropriate to remove this profile (netsh wlan dlete name = "the name exactly as shown, case-sensitive quotes". That he solved it for me.

• My computer can't find wireless networks.

  My computer can't find wireless networks. When I search for them I can answer "wireless networks service is neither the race" (the Swedish free translation).

  I have Windows Vista and I'll try to find my new wireless network working om my laptop and my iPad.

  Hello

  (1) did you check the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have any security software installed on the computer?
  3. have you made changes on the computer recently?

  Method 1:

  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.
  1. Click Start, type services.msc and press to enter.
  2. Locate the autoconfiguration WLAN service, double-click to open its properties window.
  3. on the general tab, change the startup type to automatic and click on the Start button.
  4. click on apply, then ok.
   
  Try to connect to the wireless connection and check the result.

  Method 2:
  If the service still does not start, run the System File Checker tool to scan the computer for the corrupt system files and automatically correct. To run System File Checker analysis, try the steps mentioned in this link: http://support.microsoft.com/kb/929833

  Method 3:

  I also suggest you to see link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For more information on the wireless settings, see this link: http://technet.microsoft.com/en-us/library/bb878035.aspx

• I need to reset everything on the machine. I can handle most of it, but I don't ' know not the initial settings for bios and other initial set up details.»

  from scratch

  I had to pull the battery on my dell p.c.Now I need to reset everything on the machine. I can handle most of it, but I don't ' know not the initial settings for bios and other initial set up details.» My screen there "list of questions and I n" t have the answers, it is a PHOENIX, I care. Can anyone help?

  Follow this. It should guide you through the configuration of your BIOS.

• I can connect to my network, but with access "local only".

  Access to the "Local" network only
  I can connect to my network, but with access "local only".  Internet became more intermittent (not sure if that is related or if I guess it) and did not work in several weeks.  Desktop computer is plugged into the router, but have the same problem when it is plugged into the DSL modem.  Other computers on the same router (wireless or other) work very well.  Recently, I removed Mcaffee and installed MS security essentials.  I uninstalled mcaffee of programs and settings then used the mcaffee removal tool to lighten the rest.  I uninstalled and reinstalled MS security essentials.  I thought it might be a firewall issue, but I get error 0x6D9 when I try to start it.  I tried all the steps in the following post, nothing helps.  Any other suggestions?

  ______________________

  You can follow the steps below and check if that helps you solve the problem.

  Method 1

  Try to power cycle the router and the computer and check if it helps.

  On the PC:

  1. Save your work and restart the machine.

  On the router or modem (if wireless printing):

  1. Unplug the router and the modem.
  2. Wait 30 seconds.
  3. Plug in the modem and wait for it to come to the ready state.
  4. Plug in the router.

  After you put cycle check the connection between the router and the computer.

  Method 2

  If the steps above do not help, you mayreset TCP/IP stack. To reset access the link below and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357
   
  Disable the IP helpdesk:
  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
  2. scroll down to the IP assistance service, right-click on it and select Properties
  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
  4. then click on "Stop" to stop the service from running in the current session
  5. click on OK to exit the dialog box

  Method 3

  Disable IPv6 and remove IPv6 virtual cards:
   
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
  NOTE: You should do this for each network connection, even if they are disabled.

  Method 4

  Disable the DHCP Broadcast Flag:
  Link: http://support.microsoft.com/default.aspx/kb/928233
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.microsoft.com/kb/322756.  How to back up and restore the registry in Windows
   
  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
   
  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  
  1. Click Start, type regedit in the search box, and then click regedit in the list programs.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  3. Locate and then click the following registry subkey:
  4 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
  5. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
  6. on the Edit menu, point to new, and then click DWORD (32-bit) value.
  7. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.
  8. right click on DhcpConnEnableBcastFlagToggle, then click on modify.
  9. in the value data box, type 1 and then click OK.
  10. close the registry editor.
   
  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.
  You can also try uninstalling and reinstalling the driver for the wireless card.

  ________________

  Thanks for any help!

  Hello

  All changes to the software or hardware of the computer?

  Method 1:

  Visit the link below and follow the steps.

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based computer that has multiple network cards

  http://support.Microsoft.com/kb/947041

  Method 2:

  Update the NIC drivers and check.

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems