HP Photosmart Wireless series - B109n

Similar Questions

• fake disconnected ' HP Photosmart Wireless B109n-z. ' message

  Hi all

  Using the center of HP sollution, I see the message offline wireless HP Photosmart B109n-z.

  However, I can print, I can see the cardriges levels filling and I have no problem to reach the printer via IP address.

  However, this issue would prevent me from scanning documents.

  I already reinstalled the app once, but it was a disaster even more great, even scubber not having to uninstall the HP printer software.

  Any ideas?

  GRZ

  Hi there @robhoe

  Welcome to the community

  It sounds to me like driver installation has not filled completely and correctly on your system Windows 8.1, which could be the reason why you do not have the scanning features in the software.

  Please make sure you that the printer will make copies before make you any software troubleshooting, as if there is a problem copying (printer hardware problem), the installation will most likely never complete successfully.

  I know you tried a scrubber, and that's what I would try again to remove completely all the components of your PC printers and then reinstall them later. If you want to give a shot of this, I'll post all the steps below for you to try!

  1 run this cleaner tool to remove the printer files. Use only an uninstall of level 3.

  HP Officejet software and driver removal utility

  2. restart the computer entirely to complete uninstallation.

  3. download and run the installation of your PS B109: HP Photosmart Wireless all-in-One Printer series - B109 Full Feature Software and Driver

  I hope this works, good luck!

• HP Photosmart Wireless e-All-in-One Printer series - B110

  Hello

  I have the above printer and I m finding difficulty in ordering ink cartridges.

  The available cartridges are:

  HP Photosmart Wireless e-All-in-One Printer series - B110a

  HP Photosmart Wireless e-All-in-One Printer series - B110b

  HP Photosmart Wireless e-All-in-One Printer series - B110c

  HP Photosmart Wireless e-All-in-One Printer series - B110d

  HP Photosmart Wireless e-All-in-One Printer series - B110e

  I don't know the one to choose. Can someone help me choose the right cartridge please.

  Thank you

  Presho

  In the United Kingdom, the cartridges would be 364 series.  You can order black, cyan, magenta, yellow or pack combo with three cartridges.  The cartridge photo and four packs of color with the photo cartridge are not applicable for your printer.

  You can also use the XL 364 cartridges, they have more ink at a higher price, but at a lower cost per page.

• HP Photosmart Wireless B109n-z: my scanner has stopped working

  My printer and copier work ok but the scanner has stopped working and gives me an error message-

  "The analysis cannot because another program or computer using the HP netwoked imaging device. Try again later.

  The device is not on a network, and there is no other users outside of myself using my laptop.

  Hello

  You can try this link?

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-wireless-all-in-one-printer-series-B109/3794623/model/3794624#Z7_3054ICK0K8UDA0AQC11TA930C7

  Thank you.

• Photosmart Wireless B109n-z: Impossible to connect the printer wireless to the new router

  I just changed my wireless router and can not get my printer to recognize the new router.

  When you try to reinstall with the disc that came with the printer it keeps "quit unexpectedly" at the end of the installation, but before I get to connect to the printer.

  The drive indicates that it is for use with Mac OS X v10.4; 10.5, but I can't find an option to update the web site HP despite it stating that my printer is still supported.

  I can still use the printer with a USB cable connected directly to my table, but this is no help for the other devices I have.

  Hi @Paulwrow,

  Welcome to the Forums of HP Support!
   
  I understand that you are unable to connect your HP Photosmart Wireless B109n-z to your new router wirelessly. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
   
  The CD/DVD software will not work with newer versions of Mac OS X. HP doesn't have the drivers for this printer in Mac OS X 10.11 El Capitan. The last driver out of this printer is for Mac OS X 10.6. The only driver available that uses the driver update from Apple. This causes a problem when reconfigure the wireless, as this is the software for help. It would be easier if you have another computer running an operating system that is supported so that you can install the full feature software to configure the wireless.

  As an alternative method, you can try doing as a guideline to connect the wireless printer. We will use the ad-hoc connection. With the ad-hoc connection, you can launch the built-in web server (EWS) to access the wireless configuration wizard.
   
  Use the following steps as a guide:
  Restore the default settings of the network:

  1. Press the button next to the wireless Menu.
  2. Press the button next to wireless settings.
  3. Press the button next to network by default.

  Once the network is reset, the printer should disseminate the ad hoc connection. It should look like "hpsetup" or "HP Setup (and part of the printer name or MAC address). With an IP address like 169.82.12.44.
   
  Then, connect to the network printer, that is broadcasting.

  1. On the Mac in the upper right corner, click on the wireless icon and connect to the network "HP Setup" or "hpsetup".

  Print the wireless test report:

  1. Press the button next to Scan.
  2. Press the button next to the wireless Menu.
  3. Press the button next to wireless settings.
  4. Press the button next to run the wireless network Test.

  Browse the test report wireless IPV4 of the printer (IP address) 169.82.12.44.

  1. Launch your internet browser and enter the IP as shown. This should load the printer EWS.
  2. Click on the tab network across the top.
  3. On the left side, click on wireless or network.
  4. Run the Wireless Setup Wizard.

  This is the only way to reconfigure the wireless, unless you have another computer that has supported the software.

  For more information on the ad-hoc connection, see the User Guide.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Photosmart b109n-z: Photosmart wireless b109n-z pilots

  I am trying to download the driver for my printer Photosmart wireless b109-n-z. The wizard detects the printer, but then crashes with the message "HP is compile your results." It could take up to 3 minutes, depending on the speed of your computer and connection. Thank you for your patience. "and not going anywhere.

  I saw a recent request for the driver to a different printer for someone who was having the same problem as me with the HP Web site.  The problem was solved by a direct link to the download.

  Confidence that you can do the same for me.

  Thank you in advance.

  The HP website for driver downloads is back and runing properly, you can download the latest drivers for your Photosmart b109n-z from HP here.

• Series HP Photosmart Wireless e-All-in-One B110. I can't install the driver and software

  Hello

  I formatted my computer and reinstall windows 7 64 bit, I reinstalled many software (windows office and so on...), but I can't not reinstalled driver software for my printer Hp Photosmart Wireless e-All-in-One B110 series. When I insert the original cd of HP at the start of the installation but after 1 minute is displayed error

  

  I downloaded the dirver software from HP Web site, I tried to install it, but pops up the same error

  What can I do?

  Thank you

  Hi banzafa,

  I see that you get a runtime error when trying to install your software, and you have recently reinstalled WIndows 7 64 on your PC. Please follow the steps below and let me know the result;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose Save as, save to desktop > PS_AIO_07_B110_USW_Full_Win_enu_140_126.exe
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have an non HP computer run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• Photosmart wireless e - all in the habit a B110 series printer to connect to the laptop

  Hi, my laptop and printer are connected to my network, they don't connect with each other.

  Never had this problem before, can help you, thanks a lot

  Thanks for getting back to me brummyspud

  1. Please uninstall the printer then: uninstalling the printer software
  2. Restart the computer
  3. Reinstall the printer from the download: HP Photosmart Wireless e-All-in-one printer - B110a Driver download

  Let me know if that solves the problem

• Photosmart wireless B109n-z showing "ink cartridges above appear to be missing or damaged.

  Hello, I have a problem with my photosmart printer (wirelless B109n-z) now (on Windows 7) and I could do with some advice. He started by printing not really properly-there were only a few extremely weak lines, so I opened the lid and makes sure that the ink cartridges were properly-they came out and put in the new - but then the error message came that the cyan ink cartridge is missing or damaged. As it was low on ink anyway I replaced it with a new one but the message was still there. I went through all the steps on the site of HP to address the problem, but it is always the same and have never used a not genuine HP ink cartridge. Any help is greatly appreciated.

  Jen

  If you did not start the steps in this document it.   In step four parts 11 and 12, there are four fingers touch by cartridge.  Make sure that none of these electrical contacts are misaligned, if we're folded its place gently back in its place.  (Compare contacts faulty cyan with those on the cartridges adjacent as described in this post.)

• Y at - it firmware to AirPrint activate my HP Photosmart C7200 series/model CC567A printer all in one

  Y at - it firmware to AirPrint activate my HP Photosmart C7200 series/model CC567A printer all-in-one?  My IPAD is not discovering the printer on my wireless system... so I think that the printer is not enabled for AirPrint.  ... or would it be a different problem?

  I need help.

  Unfortunately, there is not a firmware update to enable your printer for AirPrint. You could try the HP ePrint App for the iPad/iPhone.

  Let me know if you need help with your question. Thank you

• Is my HP Photosmart C309a series ePrint allow?

  I set up my printer for wireless connection. I couldn't add it to eprint. Is my HP Photosmart C309a series ePrint allow?

  Thank you

  Hello

  Your HP C309a printer does not support eprint. Most HP printers that supports the eprint feature has a letter from e. For example:

  * HP Photosmart Premium Fax e-All-in-One Printer - C410a

  * HP Photosmart Premium e-All-in-One Printer - C310a

  The updated model of your C309a (HP Photosmart Premium Fax all-in-One Printer) that supports eprint is the HP Photosmart Premium Fax e-all-in-one printer - C410a!

  click here and click here to compare the specs between c309a and C410a.

• Photosmart d110 series

  I can't save an item analysed remotely using MacBook Pro OS X V 10.9.4 with HP Photosmart D10 series.  I changed the scan to: Desktop and let Format in PDF format.    I scanned image appears but can't find where is the filename of the image.  I did a search of PDFs in Finder, but not here.

  Note: I use to be able to open remote scanning and recording of my MacBookPro for my printer.

  Welcome to the eganmon forums,

  I read your message of not being able to find your scans stored on your Mac running 10.9.4. I would like to know if by telling you scan "at a distance", is it a remote connection or a wireless connection?

  If you are connected wireless to your network, I suggest to try:

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart your Mac
  4. Add the printer again (do not select the AirPrint driver)
  5. Scan again. You can also create a new folder on your desktop for the scans only, so you will know where to get them.

  Have a wonderful Tuesday

• hp photosmart 5510 series: photosmart hp 5510 series files are not found

  Hello

  I use the Hp Photosmart 5510 series printer and is faced with a problem where I can not scan from the printer to the laptop. Before having this problem, I used to scan from the printer wireless without any problems, but after I changed my Internet brand and speed, the printer keeps saying "to ensure that the printer software is installed on your computer and this 'scan to computer' is activated via the printer software" even if I have already connected the printer again internet. I have the printer software on my laptop, but it does not work. When I try to click on scan of the computer, the computer used to say "files series hp photosmart 5510 are not found". I tried to change the IP address, but that didn't work either. So I don't know what to do now. Also, I tried to use the USB cable and it worked, who showed me on the printer, I can scan wirelessly or via USB. When I tried with the USB key attached to the laptop, wireless the wireless worked (as well as the USB port), but when I took off the USB cable, it did not work. Help, please

  Note:-J' formatted the laptop and operating system went from vista (original) to the Ultimate, which helped to improve the performance of the laptop. -What is has everything about the problem?

  Welcome to the HP community @Blizzerd,

  I wanted to answer your question to have the printer connect and work on your network wireless 'new '. I think that if you uninstall the printer and reinstall the printer software and continue through to set up the printer on your network, it should work for you.

  Here are the steps for you.

  1 uninstall the printer software, and then restart your PC.

  2. click on this link, select Windows 7 and follow all the steps to install and reconnect the printer: HP Photosmart 5510 and 7510 printers - setting upwards to a wireless network

  Test print and scan and let me know what happens! I hope that does the trick

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!

• I have the HP Photosmart C6100 series all-in-one.

  HP Photosmart C6100 series (wireless)

  I can't print from my kindle or my iphone4

  This printer supports ePrint?

  How can I find my e-mail address for this printer?

  Hello

  Unfortunately, your impression is not HP e-Print enabled so that you will not be able to use the e-Print application to print from a device.

  Your printer has wireless connectivity so Google print clouds could be an option: http://www.google.com.au/cloudprint/learn/

• Reduction of the print size HP Photosmart C4500 series page

  I have a HP Photosmart C4500 series and it is not printing to fit the entire page. The page is reduced in size (from about a third of the page) and some words are cut off. This only happens when I print a Web page. The print preview shows she will be printed to fit the page, but it never does. I use a Macbook Pro and I print wireless. I don't have the CD to reinstall the printer with me. Help?

  Thank you!

  Hi @afc13,

  Welcome to the HP Forums!

  I understand that your HP Photosmart c4500 series prints a page of size reduced on your Mac, and I'm happy to help you!

  I recommend the following:

  1. Reset the printing system. OS X Mavericks: reset the printing system.
  2. Verify and repair disk permissions. 12.x disk utility: repair disk permissions.

  Let's start with these two steps, and then we'll go from there!