HP PLATINUM - HP12C CLACULATOR

Similar Questions

• HP12C Platinum: How to calculate the EMI with a grace period?

  I'm figuring the tranche of loan compared to a loan with a grace period.  This can be done easily using MS Excel, but I need to do the calculation using my HP12CP.

  Details of the loan:

  Main: 1 million

  Interest rates. : 12% p.a.

  Tenor: 36 months

  Period: 3 months

  Payment frequency: monthly

  Loan annuity calculated with Excel: Q1 - zero; 4th in the 36th month: 36 810 /-per month

  Hello MilanH

  Perhaps this allows, if you train in two steps:

  1)

  n = 3 grace period

  IR/a=12%

  PV = 1 million

  FMT = 0.00

  FV =-1030301.00 (-because you have to pay it back)

  2)

  n = 33

  IR/a = 12%

  PV = 1030301.00

  VF = 0.00

  FMT = 36810.01 (-because you have to pay)

  I have no 12 c, but if this kind of loan is not built in, you can manage this way.

• The HP 12 c Platinum PC software activation failure

  Hello. I bought a copy of the HP12C Platinum PC software online on the website of the HP Calculator but could not get the software to enable the use of the information provided by HP/MyCommerce.  Online activation treats 6 times attempts and fails to tell me I am offline to the Internet and then offers an offline activation process, but the listed URL (http://activate.hpclaculating.com) does not exist.  Digital River/MyCommerce support tell me to contact HP via [email protected] , but my emails remained unaswered for more than a week.  Can someone help me or telling me how to activate the software or get HP to allow mycommerce.com to pay back me money paid for a product that cannot be activated?

  Thanks in advance for any help

  Russ Clinton

  Hello

  I think the activation server hosted by an external company for HP and when they did not renew his account, the activation mechanism failed.

  However, I think you have a solution on the HPMuseum forum.

  (EDIT: the solution provider has removed the message here.)

  The future readers: If you have this problem please send me a message via the forum private messaging).

  Kind regards

  Bart

• HP 12 c Platinum: strange character to the left of '0.00' in HP 12 c Platinum display

  I just bought a HP 12 c Platinum and the screen has a funny character to the left of the display "0.00" in RPN format.  It looks like a period with a comma coming out of it and disappears when you press the CLX.  Anyone know what it is?

  sbweinstein wrote:
  

  I just bought a HP 12 c Platinum and the screen has a funny character to the left of the display "0.00" in RPN format.  It looks like a period with a comma coming out of it and disappears when you press the CLX.  Anyone know what it is?

  If you mean that the curved arrow pointing down in the counterclockwise, it's sign of cancellation, which appears after only a few operations that can be undone. He appears in RPN and ALG mode and disappears after a keypress. Only one operation can be canceled, some operations cannot be cancelled. Check in the manual that is. To cancel an operation, for example, CLX, press g blue button and then the ' / '.

• Pavilion dv6 - 7943cl: win 10 anniversary Version rewrite Sony Movie Studio Platinum 12?

  Pavilion dv6 - 7043cl, after winning 10 anniversary update, stop now with "...". a no longer works... "message systematically when I run Sony Movie Studio Platinum 12;  the stop and the message arrive at the time when the application starts, the screen 'welcome. '  It makes the app totally useless - and 5 sessions with the support of Microsoft, 2 of them with level 2 technicians, have not found the answer after more than 12 hours of conversation and many relocations to win 10 and Movie Studio Platinum 12, among other complex of measures which have tried and failed.  The program worked perfectly before the big anniversary update, which is the only difference that I can find which could explain the new stop and the error message.  Support of MAGIX (who took over Sony Vegas software line recently) reported that they were not able to reproduce the problem, but have received a report of a person havaing to reinstall an earlier version of Windows 10 (before the anniversary version) to solve a problem installing with Movie Studio Platinum.  Microsoft has promised to help the resettlement of the earlier version of win 10, for which I have no control points, so I don't know if this will help. Question: it would be useful that I heard speak of someone else for the same problem with Movie Studio Platinum 12 and win 10 anniversary update (later after all 12 Sept.)    

  While is not a user of HP Pc (I'm on a Sony Vaio) I get the same problem after the big W10 update (from 2 or 3 days)

  I have 3 versions of Movie Studio Platinum version 10, 12 (32-bit) version and the version 12 (64-bit).

  None of them work anymore, they all freeze at the beginning.

  I have uninstalled/reinstalled without success.

  I found an old post (September 2015) in a forum related to a similar problem with Sony Vegas.

  The guy said he was set to start when Windows was working in pure 'safe mode '.

  So I tried it and it worked in my case for Film Studio.

  Maybe you can try it and report what happened.

  This being said, using Studio of cinema in 'safe mode' is just a way to test and may not be the way to operate.

  I hope that someone can quickly provide a solution, if not I will have a reason more (!) to go to Windows 7.

  My trust in Microsoft has droped with Windows10 (as opposed to W7) and the way things are now pushed and forced them to the client.

• Number product serial number HP12C?

  I have a calculator HP12C but I need to find the serial number and product number, because I have a warranty issue. How can I find? I think that my serial number is {deleted personal information} (not sure), but I can't find the product number?

  I just looked at the photos for my account, it says "awaiting approval" for the JPG now, but the GIF should be OK. Maybe it was the problem.

  Edit: "Pending approval" disappeared for the JPG now, it should be visible now too.

• How old is my HP12C?

  How old is my HP12C?  The # is [personal information deleted] series

  Hello

  You can try to decode the serial number only. here:

  HP calculators: decoding of serial numbers

  or ask your question here:

  MoHPC forum

  Kind regards

  BartdB

• Bloggie played not well with Movie Studio Platinum 11.0

  I have Bloggie HD Snap Camera, model MHS-TS20 and Sony Vegas Movie Studio Platinum 11.0.

  When I import the MP4 Bloggie VMS and try to edit, the video is really unstable and slow to work. Most of the time the render video and audio are not synchronized together.

  I converted the MP4 to a WMV and then edited the video and things work like they are supposed to.

  There must be an easier way?

  It is two Sony products, they should not work together?

  Can someone help me out here?

  Hi Steve,.

  Welcome to the community of Sony!

  Related information on this problem are mentioned on the technical support article below:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1022580

  Sony Creative Software discussion forum is an area of peer support, where you can share tips and advice about software like Vegas Movie Studio, etc. with other users of the Sony Creative Software product:

  http://www.sonycreativesoftware.com/forums

  If my post answered your question, please mark it as an "acceptable Solution".

  Thank you for your message.

• DVD Creator 2 Platinum randomly "flips" some avi files

  When you import .avi files to edit, program randomly "flips" some of the files. Some are returned in any screen, but play correctly in preview, and similarly, some images are returned in the form of the timeline but play correctly and vice versa.

  Have uninstalled and reinstalled and spent a long time looking at the support of InterVideo and FAQ but nothing. Help... Please...

  What help do you expect?
  Don't you think that it is a bug?

  I m not a DVD Creator 2 Platinum expert, but maybe that's a feature of s?
  Try to contact a person of InterVideo support. Perhaps the known InterVideo gusr more info on this problem and could explain why it happens

• Bad rotation with Newport PR50PP Platinum rotation controlled by SMC100PP motor controller - is that a communication or a hardware problem?

  Hello world

  It is a long shot, but I can explain my problem and I hope that someone has seen this problem before.

  PROBLEM:

  I use a rotation of Newport PR50PP turntable that is controlled by a motorcontroller SMC100PP through LabVIEW. In my experience, I shoot the scene 180 degrees to the right in increments of 36 and then turn to "zero" counterclockwise. This "zero" point must be the same 'zero', I started to leave before the rotation. The problem is that it is off by nearly a whole degree. I need to always start in the same place.

  The big problem - computer / Platinum rotation it's originally 'zero '. I record the unit of internal rotation of the scene after each movement and he tells me it's the same 0.00 that began.

  Q: is this a problem of communication between LabVIEW and the PR50PP or a mechanical problem?

  OTHER NOTES:

  • The change of rotation is repetitive and linear. I repeated more than 15 times and got about the same offset.
  • How I discovered this problem - I have a half plate on the rotation stage and looked between cross polarizers. I recorded the Cos ^ 2 model of intensity of each scan. Each pattern is rotated to the front even if the computer reports that they should be at the same position.
  • I'm under LabVIEW 2011 and by using the controls provided by Newport SMC. They communicate via USB of series.
  • Joined a technical description of the problem that my labmate written upward.

  Any idea is appreciated.

  ~ Liz Cloos

  Hello world

  After running additional tests, I discovered that it is NOT a problem of LabVIEW. The plate wave inside the rotation of PR50PP plate was a little loose and gave the appearance that the zero is changing. The ribbed plate kept turning slightly after each change of direction.

  Thanks for trying to help.

• try to install Picture IT Publishing Platinum & get error 1305 D:\PIP\PIP2002\openscn6.its...verify file exists and you can access it... help

  It wont let me install Picture It! Publushing Platinum... error message 1305:
  Error reading file D:\PIP\PIP2002\openscn6.its... check the file exists and you can open it... help... what I do

  Hello
  1 did you change on your computer before this problem?
  2. in the place where you are trying to install?
  3. is this a problem install only Platinum edition or with all applications?

  You can follow the steps in the article and see if it helps.
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• Error (-5006: 0x8000ffff) trying to install Roller Coaster Tycoon 3 Platinum on Vista.

  I know that RCT3 Platinum is an Atari game that no poster not taken in charge by Vista but I spoke with many people who are able to properly install and play. I tried their support and received no response as well as to aid their forums that I am hoping to find some help here. As soon as I click on the setup.exe to install from cd I get a screen InstallShield Wizard brief then immediately after an error stating "an error (-5006: 0x8000ffff) occurred during the execution of installation. Once the error screen is closed all the other screens nearby installation and that's it. I tried to install as administrator and with XP, 2000, 98, 95 & compatabilities but without success. I have an Intel Core 2 Quad Q6600 2.4 GHz processor with Nvidia GeForce 9500GT video on Vista home premium SP2. Any suggestions with this would be greatly appreciated. Thank you.

  Hi Quaker13,

  Thank you for using Microsoft Windows forum

  We have no information about compatibility. So, we will not be able to help a lot. When a game is not compatible or does not know compatibility then the program may or may not work on the operating system.

  See the link below that supports the theory
  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/details.aspx?type=software&p=roller%20Coaster%20Tycoon%203%20Platinum&v=Atari&UID=&pf=0&pi=2&s=roller%20Coaster%20Tycoon%203&OS=32-bit

  Contact the manufacturer game for better support

  Kind regards
  Aziz Nadeem - Microsoft Support

• Platinum Pro N paper

  Does anyone know where this new book can be purchased? The new 1.02 driver printer has this article as a choice.

  You can be assured the currently available Photo Paper Pro Platinum is version "N". Unless the seller you buy a course a few old stock.

  Often, Canon updates the printer profiles and puts any letter or number associated to a most recent profile. It is good that they maintain the older, because some of us are fixed in our ways and prefer the known execution.

  But if they did not make improvements society would stand still and soon to be run by the ubiquitous competition.

• Microsoft Picture It Publishing Platinum 2002 has stopped working.

  Original title: Picture It Publishing Platinum 2002

  I love this program and want to continue using it. I upgraded my old computer from 98 to XP, and it ran very well! I had to get a new computer and'm running XP Professional. The program loaded fine but whenever I try to put in place a project or just image, it stops working! Have found several articles on the downloadint files to fix (PI19299.exe, as well as the Ko scid EN US 316861). Tried to download the two and apparently neither one is now available. Please help me. I can't find other programs that will allow me to do what PIcture It will make! Can't believe there is no way to fix it. Why in the world MS would not continue to let people to run this program? Very frustrating!

  Hello
  OK you have downloaded and installed the patch... should I do exactly the same thing in the same place as before? Be as specific as possible with all the details.
  B Eddie

• Roxio photosuite 7 Platinum burn disc

  I decided to install roxio photosuite 7 Platinum back on my computer to make a floor photo, I have to say that I have not used for years. The problem I found is when I try to burn to disc it just won't do - I was wondering service Pack3 would be the culprit that when I origanally purchased the software box said xp sp1 please help

  Thanks in advance

  Dear J,

  Yes the burner works in other programs I checked Device Manager and roxio is listed on the recorder, the programe is about 7 or 8 years, well before the sp 2 and 3 I heard that some older programs are not compatible with these service packs - I was wondering if there was a way around this problem - I thought of right clicking on the icon Roxio and properies then in fashion compatibility - where you select to run the program in win 95 98 win 2000 win - the problem is it is windows xp version 2002 - I'm not sure of what would happen if I clicked on Win 2000.

  to answer your other question I don't know if the pramme supports export to another program.

  Edna

  ================================
  Thanks for the detailed comments.

  I just thought that if you can save or export your project
  in a film... format as. WMV. AVI, or. MPG... that you
  could view in Windows Media Player and to share
  with others. Check the help files for Roxio for info on
  How to save a movie to a folder on your hard drive.

  It may be interesting to try to run the Roxio program in
  compatibility mode, but I don't klnow not if it would be
  improve the question of the burner.

  (292533) HOW: use the Windows program
  In Windows XP compatibility mode
  http://support.Microsoft.com/?kbid=292533

  I don't know if the following Roxio update would
  a difference, but it may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Update PhotoSuite 7 Platinum to 7.0.430.0 (in English only)

  A link more...

  General issues of Roxio burning

  Good luck...