Platinum Pro N paper

Similar Questions

• You are looking for 8600 OfficeJet pro replacement paper trays

  Where can I buy replacement bins to printer OfficeJet 8600 Pro Plus paper?

  I'm looking NOT for the paper to Add on tray, but a replacement for the main tray. Mix us different types of paper and envelopes in and out of the state bar throughout the day, and instead, we would like to keep several loaded additional bins of specialized paper to reduce the wear on the main plate.

  Suggestiosn?

  Thank you!

  I searched in the online stores available through HP and was unable to find this part.  However, I could see the part is available through the HP Technical Support by calling in.

  Click here to access the complete list of HP Technical Support phone numbers.

  The reference is more CM749-60036 for Assembly of the main tray for the Officejet Pro 8600.  This part is currently around $25 usd, but the prices are subject to change.

  I hope this helps.

• LaserJet Pro M252dw: Paper heavy weight causes ghositng

  Our M252dw printer has ghosting (light versions of the printed item) each time we use card stock or labels. The same element of printing on plain paper shows no ghost image. Is there a way to adjust to big stock on this printer or another way to stop the remanence? The user must be able to print on thick, and I do not think that it exceeds the upper limit that I saw mentioned in some of the answers in the forum. If there is no way to adjust for thicker paper is a different model that will allow the adjustment of thicker stock?

  Hi @hpuser4dct,

  Welcome to the Forums of HP Support! I see that you have problems printing on heavy weight paper, you get light versions of the printed item. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  The weight of media supported for this model is:

  14 to 43 lb (bed/mat, recommended), up to 47 lb Postcards, 53 lb HP Matte; 16 to 43 lb (coated or glossy, recommended), Postcards, 59 lb ice HP 47 lbs.

  Source: sheet HP Color LaserJe tPro M252dw.

  Through the printer driver, you will need to check different paper types, if the weight of the paper you are using is supported.

  You can check the EconoMode settings, go to step 4: check the settings of this document EconoMode, HP Color LaserJet Pro M252, M274, printers - fixing poor print quality M277.

  For information on other models, you can go to www.hpshopping.com or call directly. At the bottom of the page select Contact HP and commercial.

  If there is anything else I can help you, let me know. Thank you.

• HP Officejet Pro 8500: Paper feeding problems

  Why my printer HP Officejet Pro 8500 has constant pain to pick up the first sheet of paper, when the 'Print' is selected.  He invariably through a blank sheet and then gives the message "on paper" when the paper is in the tray.  It's same with envelopes.  Frustrating!

  The troubleshooting in the here document steps can help solve problems loading the paper in the printer Officejet 8500.  Please go through all the steps in order.

• HP Officejet pro l7680 - paper jam error

  original title: HP Officejet pro l7680

  Guard gives me paper jam error. I removed all stuffed with material, redefinition and still not stop send MSG does anyone have any suggestions? Says the error is in the area of the print cartridge. Nothing there.

  Hello

  ·          The printer works much earlier?

  ·          What have the changes to the computer or the printer settings until the problem occurred?

  You can see the link given below to resolve the problem.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope that information was useful

• I have canon MP170 100. use 1/2 pro gloss or shine pro 3 paper?

  What is the reason to why should I choose paper phot canon pro his 1/2 on the pro 3 photo paper luster when I created the profile of canon paper?

  ½ is a print quality level higher than 3. Try to print a photo with both and see which you prefer more. If you don't see a difference use 3.

• Laser Jet MFP M125nw Pro: the paper is stuck inside the printer

  the paper is stuck inside the printer Laser Jet Pro MFP M125nw

  Did you follow the information from the HP web site?

  http://support.HP.com/us-en/product/HP-LaserJet-Pro-MFP-M125-series/5396664/model/5303404/document/c03921935/

• OfficeJet Pro 8620: Paper feed problem

  New Machine - age for a day. Follow the installation procedure and a tray loaded with good paper 20 # 8-1/2 "x 11". When I send a print job to the printer - the finished sheet is great except for a double crease to the top of the sheet. It's as if she gets stuck, deform the sheet and then it ends. It is not appropriate for an office environment.

  This printer has a duplex on the back unit.

  Secondly when I put the tray paper for 4 X 6 photo paper and load the tray... it won't pull the paper and printing. The error message says to check the configuration of the status bar and load the paper - I have already done.

  HI @Scott18,

  Welcome to the Forums of HP Support!

  I understand that your day an old printer HP OfficeJet Pro 8620 is the rustle of paper and do not print on paper 4 x 6. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can certainly understand how it would make you questions in an office environment. Looks like it's that a barrier inside the printer or a roller is defective.

  To try to fix the problem, I suggest that take a look deeper inside the printer with a flashlight to see if you can determine the cause.

  Please, try the steps in these guides:

  •  Displays a Message "paper jam".
  •  Displays a Message 'Transport Jam'

  NOTE: Some steps several times may help solve the problem.

  If you have completed all the above steps and your product still has a problem, service the product. If the printer is within the buyers remorse period, put the printer in the point of sale or contact HP.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Officejet Pro 8600 - Paper copy on the glass of the scanner, Officejet tries to copy the ADF

  I'm trying to copy a document on my HP Officejet Pro 8600.  I placed the original face down on the scanner glass.  There is no original in the ADF.  Then, I pressed "Copy" and "launch in black."  the Offficejet then "think" the original is in the ADF file and try to copy a non-existent original.  The Officejet then generates a paper jam «»
  in the ADF file' error message with instructions to clear paper jam and press 'OK' and spews a piece of paper from the paper tray. There is not an option for 'back '.  If I try to humor the Officejet by opening and closing the cover of the ADF and pressing 'OK', the Officeject generates a copy which is covered with black ink.  If I ask preview copy o, the document on the scanner glass is displayed.  I can adjust margins, etc.  When I select then 'copy' and 'Black start', the Officejet is trying to copy a nonexistent document in the ADF and generates the "Paper jam" message again.  Since there is not an option "go back", I turn the printer off, then turn it back on, and then try again.

  How do I train me or the Officejet for copy of the scanner glass when the original is located on the glass of the scanner NOT the ADF?

  Thanks for your help to solve this frustrating problem.

  Hi Knitter507,

  Try to do a hard reset as described in the following link.  Click here

  If that doesn't help, can you print a printer status report and give me the a.) Product # and B.) Version of the firmware of the printer?  To print the report, press on the arrow to the right on the screen of the printer control and then configure / reports / Printer Status Report.

  What is the operating system for your computer?

  You are able to make a hollow photocopy the ADF?

• HP Officejet Pro 250 paper (A8Z70A) for other types of paper tray

  Paper HP Officejet Pro 250 (A8Z70A) tray

  I have printer HP Officejet Pro 8620 e-All-in-One (A7F65A).

  Can I use another type of paper as in the main test for? Example A4 in the trial main and envelopes in the second bin.

  THX :-)

  P.

  OK, so it you don't have to give the same paper with both try?

  :-)

  THX,

  P.

• OfficeJet pro 8600 paper tray slides not well

  OfficeJet Pro 8600, Vista.   Newly purchased.

  It is about the paper tray (and there's only a single tray for the Pro model).

  It is not related to change the paper size, or how to close the tray when in legal size I've seen in a post.

  This tray is attached directly on the surface of the table. When you open and push to close, he rubs too on this surface and is very difficult to open or close.  It will just slip off as my other hp printers.  The friction is causing this frustration.   I have to actually lift the printer with my other hand to remove the bin to.

  Anyone else having this?  How to remedy?

  What a shame of a problem.  Looks like a nice printer.

  Problem solved.  The table of this printer on a material cover.  I placed the printer elsewhere with hard and soft surface.  This seems to work better.  However, not the best slides inside and out, but a lot better.

  conclusion: do not throw a printer on any material!

  Sorry for the inconvenience.

  Solved.

• HP Officejet Pro - second paper tray 8600

  My Officejet Pro 8500 Premium printer no longer works. Bought a new printer Officejet Pro 8600, the basic version. Is it possible to reuse the 8500 second tray paper on my new printer?

  I can't say with certainty, but a couple of data points suggest 'no ':

  • The part number for the 8600 Officejet and Officejet 8500 extra paper tray are different.  The Officejet 8600 extra paper tray is the CN548A, the 8500 is CM759A.
  • I have a 8600 Officejet with the additional target bonus and an Officejet 8500 has without the tray extray.  I tried to put the tray on the 8500 a 8600 and it didn't fit.

• LaserJet Pro M177fw: LaserJet Pro M177fw: paper hangs when printing

  Whenever I print the paper gets stuck less than halfway so that the printer display says 'Printing', I cleared the jam several times and tried different settings and it won't work. The book is very good, I tried it on LaserJet Pro my brother. I tried on my laptop Mac and Windows PC, Wifi USB, nothing works.

  Hi@faisaal,

  I see you've found paper jams, the paper goes in at half way and gets stuck. I will definitely do my best to help you.

  Please, try the procedure described in this document to see if it will help to solve this problem.

  HP Color LaserJet M176n MFP Pro and the printers M177fw - solving paper feed or paper jam problems.

  I've included the manual with information on where to look for paper jams or obstructions.

  Start on page 75. Multifunction COLOR LASERJET PRO.

  If the problem persists, please Contact the HP Support for help. Check the model number and the form to receive a file number for faster assistance.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• OfficeJet Pro 8610: Paper feeding problems

  Is it possible to manually feed a single sheet of paper in the 8610?  I have sheets simple manual power in my old Lazerjet 4Plus and find it convenient if I use 'good side paper '. (reuse, recycling)

  @Arnot41

  Welcome to the Community Forum of HP.

  I don't think you can "unique paper source" in this printer.

  Part of the problem could be the way the printer picks up the paper - the mechanism (rollers, power, sensors) - must be "so" or something can glitch and you might get an error any.

  Assuming that the paper is the same quality paper that could be used in the printer in any case, it is standard 20 # bnd, white paper, or another high-quality brand HP or equivalent, then the following should work:

  You might be able to 'good use' book on top of new paper in the tray from the stack and use it that way.  If the printer not to panic because of the paper with something printed on the back of the paper, it should work.

  Stack the paper into the tray with the clean side to print "hidden face".   This means that the 'already printed side' will be visible when the paper is in the tray.

  You can try it certainly - if the printer doesn't like it, it will tell you on this subject.

  The 8630 Pro OfficeJet print on paper one side "already used" - I just tested.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others to find Solutions and answers!

• Adobe pro XI paper capture recognition service outage tips?

  Excel files for the graphics assessment but when I opened adobe pro version XI, he's trying to convert the scanned pdf document gives me the message

  "failed to capture paper recognition services" I tried several fixes, but nothing has worked so far. suggestions or solutions out there in

  land of Adobe?

  Hi David,

  This happens with any scanned pdf file?

  Try the steps in this KB: "Acrobat is unable to access the service recognition...". "during an attempt to OCR (Acrobat 8.0 on Windows) and check if it works for you.

  Kind regards

  Rave