Roxio photosuite 7 Platinum burn disc

Similar Questions

• Problems burning discs with toast

  I have problems burning discs using toast. I had with my old Toast 10, and the problem persists despite an update of Toast Titanium 14, so I assume that the problem is with my mac and not the toast. This happens with all types of disks, but is less common with data records that are not too big. I receive pop-up messages such as: -.

  Sense Key = MEDIUM ERROR

  Sense Code = 0x0C

  WRITE ERROR

  I have defraged my drive and controls with TechTool Pro, but it does not help.

  Any ideas?

  Thank you

  Rob

  

  This error is a response is received from the reader, by Toast.   This means that the drive has reported a class specific (key) and error type (code).  In this case, involving a class of errors appearing with the recording medium and the specific error returned is a clerical error.   This means that the write failed.   Why writing has failed is not returned, neither the player nor the Toast in particular knows that.

  Apply current patches for your version of Toast, if you are not already underway.  This may correct the incompatibilities with some kind of recording media and some readers work.  There is much more variability here with the media and readers than most people imagine.   Try another drive for registration.   Try different media - an any other brand, preference.    Try a cleaning optical media disc.   Dusty heads can cause this type of error.  Definitely try record to the low speed allowing the unit and the way, too.

  So - if the above fails, please report the problem and specific recording media used (it can be data saving these settings on optical, data supports that aimed to help the reader to adapt to specific media) and the optical drive model, for the folks at Roxio.

  Defragmenting disks and technology tools and the rest probably aren't relevant here, unfortunately.  (I don't remember offhand if a failure to get pretty quickly the data on the disk - defragmentation is intended to address - indicates an error in writing or not, but I wouldn't bet on that there is correspondence sane with any of the optical device errors.)  Optical drives are basic devices and semi unreliable in general, no two revisions of the firmware on the optical drives are never the same and sometimes not even two disks with the same firmware revision, optical drives getting harder and more fragmentary with age, and optical media itself can be wonderfully flaky.   That to have written more than a small optical recording software.)

• ITunes fail to burn discs on my XP PC

  I loaded the latest version of iTunes on my XP computer and found that I could not burn a CD of my playlist has received an error message "no disk found" and 'records are missing', even if I can download songs from this album on iTunes and can burn discs of Windows media player.  I tried to reinstall iTunes, I deleted Roxio Creator and insofar as I could, the Windows Media Recorder. I couldn't find the offending registry identified by Apple commands and tried loading gear as suggests, but always without success. I also had a scan of my DVD programs and they are fine.

  Can someone help me with this?

  Hi petitsoldat,

  Are you able to burn CDs with windows media player the problem is related to iTunes.

  I suggest you follow the steps in the below links:

  1 ITunes for Windows: additional troubleshooting questions burning tips:http://support.apple.com/kb/TS1374

  2. impossible to burn a CD in iTunes for Windows:http://support.apple.com/kb/TS1436

  I would still recommend you to the support forum to contact apple, in case if they can help you with the settings.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The attempt to burn disc failed.  Burning failed because of a medium write error.

  Created playlist, click the File command: "Burn playlist to CD."  Burn insiders, but after two pieces had been registered, eject disk automatically with the message: "the attempt to burn disc failed. Burning failed because of a medium write error. "Burning speed was set to 8 x.

  Recent history: previously, I successfully burned two disk at maximum speed, but it took hours to write the tracks on the disc!

  Using the highest speed it shouldn't take hours to write a disc.

  Have you tried a good quality disc?  I bought cheapo discs in the past and had 50% failure on me during combustion and 25% success fail to try to replicate.

  You can try a disk cleanup drive. Slot loaders act as vacuums for dust.  Yet, I would not hold for a large part using a.

  You provide details on your computer. I'm guessing that it is 5 + years old, which means that you could easily be in place for a replacement drive (or buy an external one).

• Carpet * a DVD-RAM UJ-820 s do not read or burn discs

  Hi, I'm Natalie and I need help with my problem that occurs.

  Operating system:
  Windows XP Home Edition
  Laptop Toshiba Satellite
  Model A75-S229
  Multi recorder drive: CD and DVD

  The problem that happens is that I can not get any CD or DVD to work when I put them. What is happening is he's trying to load but makes the window "Not responding", unless I have the disc, then everything will be fine. What is also involved, is that I can't burn discs at all, at any speed.

  Also, I would add, when I go to my computer > right click on the DVD - RAM drive > properties and under the general tab it states:

  Type: CD player
  file system: unknown

  I don't know if that's the problem...

  Can someone help me?

  HI Isabelle.

  Please check in the Device Manager to see if there is a problem with your optical drive. Normally this will be displayed as an exclamation point against the device.

  The fact that the file system is listed as "unknown" is because the drive could not read the format of the disc so that Windors Explorer cannot identify any file structure.

  Your problem could be something very simple like a lens dirty or a faulty device driver. It is not easy to tell from your description exactly what can be wrong, but I would say you try some of the easy options so try first to clean the lens, and if this does not resolve your problem, then try to remove the drive (Device Manager) and reboot for the device will be installed new.

  If all else fails, you will have checked player be an authorized Service partner.

  Kind regards

• ITunes - problems with burning discs on external hard drive

  Hello

  I get error messages when I try to burn CDs on iTunes - corrects not allowed to perform. My iTunes media storage is related to an external hard drive - without preferences iTunes n. I changed permissions Read rights and write on iTunes via the Finder as suggested by a number of help pages - her has not resolved the problem. It is interesting when I change storage media iTunes to the default location on the hard drive - I can then burn discs. But as I hear it all accesed by iTunes data stored on external disk - this isn't a solution. Can anyone help?

  How externally is formatted? the last time that I answered this problem 2 days ago the person was externally formatted in NTFS and it must be Mac.

• Equium U400 is not reading or burning discs

  My Equium U400 is not reading or burning discs.
  Anyoe can help please?

  Hey,.

  OK, your laptop isn't able to read or burn discs, but does that mean exactly?

  Your drive is listed in Device Manager?
  =>, You can try to remove and restart your laptop.

  Do you see yellow exclamation points in weird Device Manager?
  -Online check the Microsoft Knowledge Base. It s known issue.

  You get an error message if you try Brüning a disc?
  -Online try another program like CD Burner XP burning

  Have you checked the Web from Toshiba site for an update of the firmware?

  What operating system you are using?

  As you can see, a lot of answered no question they would be important in helping you.

• Satellite A60-302: CD Player read DVDs and CDs but not burned discs

  I have a Toshiba laptop: Satellite A60-302 and I have a problem with the cd player. It can read DVDs and records I buy but it will not read burned discs (even the ones I burned with the portable computers own burner). Only from time to time, he will read a burned disc.
  I tried to clean the eye of laser of cd players, but it did not help.

  Anyone know what could be the problem?

  Hello

  This sounds like the CD burner doesn't burn CD correctly.
  You suggested that you used different types of CD.
  In the user manual, you will find a list of compatible media.
  These media has been tested and it works correctly.

  But if this happens with all CD, so possibly the drive cannot work properly and only a replacement would solve that problem.

• What is the right software to burn discs?

  Hello

  Every day, I download a bunch of stuff: movies, music, games... So my question is: what software is good for burning Cd/Dvd discs?

  Thank you

  Hello

  You can find many good programs to burn discs, some of them shareware or freeware. Example: Ashampoo Burning Studio, Nero, Alcohol CD and DVD burning software. As for me, I like ashampoo, it is easy to use.

  welcome them

• Roxio Easy CD & DVD Burner

  I bought roxio easy CD & DVD burning. and installed it on my laptop computer top! I couldn't find what I wanted to burn to DVD.  Then this EASY summer... YA RIGHT!  I don't see anything easy on the program, there, nobody knows! I mean "REALLY" know how to use this ROXIE... Cause I want to know what I do not?  again try to burn a DVD is a pain... relive the pain of someone...

  Of course, this is not a Microsoft problem and must be addressed to Roxio. Maybe these guides help.

  http://img.Roxio.com/guides/GSG/EasyCDandDVDBurning/EasyCD_DVDBurning_GSG_ENU.PDF

  http://img.Roxio.com/guides/GSG/EasyCDandDVDBurning/Easy_CD_and_DVD_Burning_GSG_screen_ENU.PDF

  http://www.Roxio.com/enu/userguides/

• Burned discs are not playable except on my computer

  Burned discs are not playable except on my computer!  How can I solve this problem?

  Hello

  Use the mastered Format to burn the discs, so you can read about other players. Even their use
  in a car drive.

  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Burned CD does not not in car CD player
  http://www.andybrain.com/archive/MB/burned_cd_in_car_player.htm

  Why the CD player in my car does not play the CD that I burn?
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/mediaadvice/0091.mspx#EKF

  Check with the experts here
  http://Club.myce.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My count does not recognize a disc in my D drive and so I can not burn discs.

  When I try to burn discs, I get error messages telling me that there is no disc in the drive, when there is a disc in the drive.  Help me

  Hello

  1. have you installed any third-party CD - DVD burning software?

  Method 1.
  To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.
  Reference:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2.
  The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
  http://support.Microsoft.com/kb/321641/

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Change the default format for burning discs of this system active files in the ISO image format

  How can I change the default format for burning discs of this system of active files to ISO image format?  I don't want the active file as the default system and really don't want to have to choose what I want to use the default every time.  It's boring. I have Vista x 64 on my computer and have not yet adapted to all the changes in XP.

  Thanks, but it's not useful.  It is more that an 'improvement' Microsoft did that, as I fear, is a total and far failure to be an improvement.  It also means that I'll just use a 3rd party program to burn all my CD/DVDs.  You know if I wanted to be able to remove, reformat, etc.. CD/DVD I would use those rewritable.  That's why they exist.

• DVD drive will burn discs and not read the content

  my dvd player will be only burn discs... any time I put in a cd of software or audio CDs, it won't let me veiw content... When I put in a cd of software says "Please insert the disk" and ejects the cd. When I put a CD audo (burned) it gives me just the ability to add files to a cd. thinking it was a problem with the drive its self, I bought an external dvd drive and it does the same thing. I can't understand why he won't let me see or install any content of a cd, any help or point in the right direction would be really useful thanks.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burn
  and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  CD have a tolerance + - and you can read on the edge outside their tolerance. They
  may be released but it is usually more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Impossible to burn discs on HP 6250

  When you try to burn pictures on an HP 6250 on disc (CD) I get all the way to burn disc, but when I select "Burn" nothing happens. However, if I transfer the images to a flash (of pors E or F) drive and then upload them to my HP laptop I can 'burn disc without problem.

  Great job, thank you!