Bad rotation with Newport PR50PP Platinum rotation controlled by SMC100PP motor controller - is that a communication or a hardware problem?

Similar Questions

• problem with internet conection shop said that it looks like a hardware problem and told me to contact you

  laptop light shop and was asked to check the internet connection, he tried his, but he said that without internet conection will not work even the wireless

  Hello

  If it's a hardware problem, then it can be fixed on the Internet forums.

  Try another store that could be more sensitive to decent work.

  If not, maybe this can help.

  http://www.ezlan.NET/wireless.html

• Pavilion dv8: problem with Pavilion dv8 (treble/bass control) Windows 10

  I had my Pavilion dv8 for awhile.  I started having problems with the slider treble/bass control. He would sporadically pop-up and begin to change the treble or bass at irregular intervals. He also unplug randomly my wireless connection. I tried to solve the problem by downloading a driver, but the problem remains. At first, it was just a little annoying, fixed by clicking the mouse or pressing the upper button of the internet, but now it of REALLY boring, popping up even as I write this post. But there is no driver for Windows 10. Someone at - it solutions?

  Thank you for your help

  Merah

  Hi @Merah

  Welcome to the HP Forums.

  I would like to take a moment and thank you for the use of this forum, it is a great place to find answers.
  
  If I understand correctly you are facing problem control treble/bass in your laptop.

  I would like to know the number of full model of your laptop so that I can better help you with this problem.

  Thank you.

• Bad experience with Lenovo.

  Hello world

  I would like to share with you my bad experience with lenovo. I bought S10 2 weeks. Since the first day, it has not worked right. In the middle of my work it rebooted by itself and took a lot of time (20-30 min) to open XP when I turned it on. Then, I decided to restore the system with the OneKey Recovery button, but I couldn't activate the laptop after that at all. After that, I called technical support and explain my problem. They advised me to call lenovo sales and ask to replace the system. I followed the advice and call them and the representative told me that I have to send the laptop to the technical support group and they try first to solve this problem, if they would not be able to fix then I would send a new, and it would take at least 2 weeks to understand what is wrong with the system. I was indignant at this topic and he told me that if I want a new right now that I have to pay 15% bonus. Can you imagine that? Then I called the technical support group and we did some tests together and it did not work. After that, they still suggest to call lenovo sales to replace this laptop. Finally, sales representative decided to replace my laptop faulty by a new one. He arranged the pick UPS faulty laptop and created the order for the new system. Later the same day, I found that they charged me twice for the laptop. This means that I have a defective S10 only laptop, but have paid in full for two laptops. Today is the second day, and nobody came to the inverter to take the defective laptop. I called them and I was wondering why no one pick up the laptop. The answer was: no one does not organize the UPS pick up. This is Lenovo service! I've never seen this kind of service. It's terrible! I asked to connect with the Manager, but the Manager was very busy and I left the request to remember. I lose 4-5 hours of my time to explain my problem and request a replacement. Whenever they transferred my call to various departments, I had to wait 20-25 min. technical support is very good, they are very helpful and polite. Unfortunately, I can't say the same for lenovo sales representatives. It was my first lenovo and I'm sure that the last of them. Would not recommend to anyone to buy it. The service is horrible!

  I hope that, ultimately, the faulty laptop is picked up tomorrow. I am thinking to return it and get my money back if they don't send me not the new Friday, as they promised.

  Thanks for sharing your experience here!

  I received my S10 new and very satisfied. This works perfectly. Finally, I got what I wanted.

  I did from my first experience with Lenovo: If you have a problem with Lenovo products you should call and talk with officials. It is best to talk with several representatives, because not every representative has correct information. If the representatives are not useful, you have to speak to the supervisor or Manager. In addition, post your case in this forum. I suspect that some manager Lenovo check this forum. My problem has been resolved as soon as I posted my experience here.

  The IBM product portable grand, but I wish they hire more agents for sale or magazine somehow their service.

  Marry Christmas

• my desktop has rotated 90 degrees after playing a game that I changed the resolution. Tuning the pc turned off did not help

  my desktop has rotated 90 degrees after playing a game that I changed the resolution.  Tuning the pc turned off did not help

  Hello

  · What is the number and the model of the computer?

  · What game do you play?

  Try the following steps:

  a. right click on the desktop empty

  b. Select graphics options

  c. and change the setting to normal and check if that helps.

• I can't uninstall IncrediMail with markets listed in the control panel.

  Original title: impossible to uninstall

  I can't uninstall IncrediMail with markets listed in the control panel. I have Dell Windows Vista

  Hi Anneloye,

  Please use the forum for Support of Vista,

  It's the Q / A about uninstalling IncrediMail site:

  Q: How to uninstall IncrediMail?

  R: to uninstall IncrediMail, simply do the following:

  1. Click the Windows 'Start' menu, scroll to 'Programs', select "IncrediMail" and click "Uninstall IncrediMail".

     Note: When you uninstall IncrediMail, you will lose all unsaved data. It is recommended to backup your IncrediMail data before uninstall, in case you want to use it later.

  2. Select the option "Uninstall IncrediMail" (marked in red) and click 'Next' (marked in blue). When asked to verify the uninstallation process, click 'yes '.

     

  3. Once the uninstall is complete, reboot your computer.
  4. Navigate to: C:\Program Files\IncrediMail.
  5. Remove the 'bin' folder to completely remove IncrediMail from your computer.

  Hope this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• LR fills the entire screen. How can I reduce this so I can control the size or reduce it with the help of the control-M?

  LR fills the entire screen. How can I reduce this so I can control the size or reduce it with the help of the control-M?

  Hi DP,.

  Are full-screen mode in Lightroom, you can it exist by pressing SHIFT + F.

  Kind regards

  Mohit

• How inegrate OID with OEM 12 c Cloud Control

  Hi all
  
  Is someone can you please tell me how I can integrate OID with OEM 12 c Cloud Control. As we integrate our OID with weblogic administration console, is it possible to integrate the control of cloud OEM with OID?
  
  Thanks in advance!

  Hello

  Please find the URL below:
  http://docs.Oracle.com/CD/E24628_01/doc.121/e24473/security.htm#BABGAGIJ

  Following article will provide you with information related to the integration of the OID:

  13.2.5 oracle Internet Directory (OID)

  You can implement an OID authentication scheme have Enterprise Manager to authenticate users against the OID.

  The emctl config auth oid on the WHO command creates an OracleInternetDirectoryAuthenticator type WebLogic authentication provider that uses the configuration specified by the command parameter values. All the configuration values specified not retain the default values. Tuning and modification of the OID advanced configuration settings is performed through the Console of Administration WebLogic Server and not the emctl config oid auth command.

  Prerequisites

  LDAP Directory Internet Oracle server is turned on.

  Run the oid emctl config auth on each SGD command.

  emctl config auth oid-ldap_host - - ldap_principal ldap_port [-ldap_credential ] [-sysman_pwd ] - user_base_dn - group_base_dn
  where:

  ldap_host: LDAP host name

  ldap_port: the LDAP port

  ldap_principal: the unique name (DN) of the user LDAP of the WebLogic Server should use to connect to the LDAP server.

  ldap_credential: password for the user specified by ldap_principal.

  user_base_dn: the basis of unique name (DN of the tree in the LDAP directory that contains the users).

  group_base_dn - the base distinguished name (DN of the tree in the LDAP directory that contains the groups).

  Example:

  emctl config auth oid-ldap_host "ldaphost" - ldap_port "3060-" ldap_principal "cn = sleep" - user_base_dn "cn = users, dc = us, dc = oracle, dc = com" - group_base_dn "cn = groups, dc = us, dc = oracle, dc = com" - ldap_credential "my_ldap_password" - sysman_pwd "my_sysman_password".
  Stop the SGD.

  emctl stop who-all

  Restart the SGD.

  emctl start SGD

  Note:
  For deployments of Enterprise Manager in several instances of the WHO, emctl config auth oid must be run on each SGD. Each MSO must be restarted so that the changes take effect.
  Test the Configuration of OIDS

  Use the WebLogic Server Console of Administration (tab users and groups) to check if the configuration of the OID is successful. To access this tab, select Home/summary of Security Realms/myrealm/users and groups. Tab users and groups, you will see the users and the groups showing the OID.

  Best regards
  Vincent

• BAD RESULTS WITH OUTER JOINS AND TABLES WITH A CHECK CONSTRAINT

  HII All,
  Could any such a me when we encounter this bug? Please help me with a simple example so that I can search for them in my PB.
  
  
  Bug:-8447623
  
  Bug / / Desc: BAD RESULTS WITH OUTER JOINS AND TABLES WITH a CHECK CONSTRAINT
  
  
  I ran the outer joins with check queries constraint 11G 11.1.0.7.0 and 10 g 2, but the result is the same. Need to know the scenario where I will face this bug of your experts and people who have already experienced this bug.
  
  
  Version: -.
  

  SQL> select * from v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
  PL/SQL Release 11.1.0.7.0 - Production
  CORE    11.1.0.7.0      Production
  TNS for Solaris: Version 11.1.0.7.0 - Production
  NLSRTL Version 11.1.0.7.0 - Production

  Why do you not use the description of the bug test case in Metalink (we obviously can't post it here because it would violate the copyright of Metalink)? Your test case is not a candidate for the elimination of the join, so he did not have the bug.

  Have you really read the description of the bug in Metalink rather than just looking at the title of the bug? The bug itself is quite clear that a query plan that involves the elimination of the join is a necessary condition. The title of bug nothing will never tell the whole story.

  If you try to work through a few tens of thousands of bugs in 11.1.0.7, of which many are not published, trying to determine whether your application would be affected by the bug? Wouldn't be order of magnitude easier to upgrade the application to 11.1.0.7 in a test environment and test the application to see what, if anything, breaks? Understand that the vast majority of the problems that people experience during an upgrade are not the result of bugs - they are the result of changes in behaviour documented as changes in query plans. And among those who encounter bugs, a relatively large fraction of the new variety. Even if you have completed the Herculean task of verifying each bug on your code base, which would not significantly easier upgrade. In addition, at the time wherever you actually performed this analysis, Oracle reportedly released 3 or 4 new versions.

  And at this stage would be unwise to consider an upgrade to 11.2?

  Justin

• If you have any with the itemrender have a control label and onther a gri data

  Hi friends,

  If you have any with the itemrender have a control label and onther a data grid control.

  In my application, I used list control. The list control's item converter. In my case if I click on the name list control, releated data corresponding to the data grid need to view and control the list as label.

  < mx:List width = "750" id = "Lst_userlist" verticalScrollPolicy = "off" horizontalScrollPolicy = "off" rowCount = "20".
  labelField = "sec_user_first_name + sec_user_last_name" labelFunction = "BindUserName" buttonMode = "true" itemClick = "Click_UserList (event)" > "
  
  < mx:itemRenderer >
  
  < fx:Component >
  
  < mx:VBox horizontalScrollPolicy = "off" verticalScrollPolicy = "off" >
  
  < s:Label id = name = "{data .sec_user_first_name + data .sec_user_last_name 'lbl_userhead'} ' buttonMode ="true"color =" #000000 "/ >" "

  < mx:DataGrid height = "100%" id = "membershipGrid" alternatingItemColors = "[#DCDCDC, F8F8FF #]" "5" paddingLeft = horizontalScrollPolicy = "off" color = 'black '.
  horizontalGridLines = "false" verticalScrollPolicy = 'auto' verticalGridLines = rowCount = "{membershipArrColl.length 'false'}" rowHeight = "25" "
  borderSkin = "{null}" showHeaders = 'true' borderVisible = "false" dataProvider = "{membershipArrColl}" width = "750" visible = "false" includeInLayout = "false" >
  
  < mx:columns >
  < mx:DataGridColumn width = "180" headerText = "Name" minWidth = "150" sortable = "true" wordWrap = "true" >
  < mx:itemRenderer >
  < fx:Component >
  < mx:HBox horizontalScrollPolicy = "off" >
  < fx:Script >
  <! [CDATA]
  override public function set data(value:Object):void {}
  Super.Data = value;
  
  if(Data.home_sec_organization_id==Data.sec_organization_id)
  {
  FileImg.Load ("/ist_shared/ist_images/ist_icons/Modern/gif/16/hot/user_favorites_16_hot.gi f");
  }
  on the other
  {
  FileImg.Load("/ist_shared/ist_images/ist_icons/Modern/gif/16/dis/user_remove_16_dis.gif");
  }
  lbl_Gridcloumn_name. Text = Data + .sec_user_first_name""+ data.sec_user_last_name;
  }
  
  []] >
  
  < / fx:Script >
  < mx:Image id = "fileimg" buttonMode = "true" toolTip = "This is organization at the home page of the user" / >
  < s:Label id = "lbl_Gridcloumn_name" width = "200" buttonMode = "true" textDecoration = "underline" toolTip = "User Menu [{data.sec_user_name}]" click = "outerDocument.Click_Name (event); »    / >
  
  < / mx:HBox >
  < / fx:Component >
  < / mx:itemRenderer >
  < / mx:DataGridColumn >
  < mx:DataGridColumn width = "120" minWidth = "110" headerText = "Username" sortable = "true" dataField = "sec_user_name" / >
  
  < mx:DataGridColumn width = "100" minWidth = "80" headerText = "OrgName" dataField = "sec_org_name" >
  
  < / mx:columns >
  
  < / mx:DataGrid >

  
  
  < / mx:VBox >
  < / fx:Component >
  
  < / mx:itemRenderer >
  < / mx:List >

  Please help a whole for me...

  Thank you

  Mamoudou R.

  If I understand correctly, you want to display a different set of data in a DataGrid control for each selected item in a list?

  I would just use link:

  This assumes that this list is filled with the data elements in a format similar to this:

  {

  label: "Label 1 list."

  data:]

  {col1: "col1", col2: "col2"},

  {col1: "col1", col2: "col2"},

  {col1: "col1", col2: "col2"}

  ]

  }

• Bad connection with charger

  I don't know how it happened, but I think that it is after I accidentally slept on it. Although it either in this topic will only show 50% battery level unless I have to apply pressure on the back. I also spend autour charger wire to get the phone for free and what load will show battery level OK. If I hit it slightly, it turns off charge and requires a lot of scope to put on the. While he's dead and I have thye charger connected, it will show the battery especially with 1 bar of red at the bottom with the symbol but load does not load. Again, I must move the thread so that it can start loading in which case would begin to turn it on and then show the battery level. I know this is similar to other subjects but Iran were all singular and I combined problems, which means that I need an another solution to fix this cannot so somebody tell me what happened and how to fix it please.

  Issue edited by Rickard

  @malakhi

  That is not factory reset the phone

  malakhi wrote:
  Try the reset factory and turning the phone off and charge your phone when is disabled. Then fully charged switch on and feedback

  @HaosLeonidas

  This seems to be a hardware problem, contact your Local support for your device inspected

• Analog multichannel peculiar read problem with PCI-6014 - hardware problem

  Hi all

  I see some very special behaviors with a 6014 when I do a multi-channel analog playback.  I am revamping of existing code to a customer, which implies the passing of the traditional DAQ in the DAQmx.  Traditional DAQ does not use a system based on the tasks, my client was in the process of reading clocked by the software for only one channel at a time, depending on what signal was of interest to both.  (application is a series of tests on a control PCB who will interface with some hardware, checking the answers and tensions and others)

  When I rewrote the application using DAQmx, I created a single task that contains all of the analog inputs of the map (AI0:15).  When I am interested in a particular signal, I indexed the channel since the reading chart data.  The strings that contain the actual data are 0, 1, 3, 4, 5, 6, 7, 13, 14 and 15.  All channels are NRSE.

  One of the signals of interest lights AI7.

  When I connect the AI7 signal with an oscilloscope, I read 2.5V - which is exactly what I expect to see.

  When I read AI7 using MAX, I read 2.5V.

  When I read AI7 by itself using a single channel DAQmx reading (i.e. 1 Samp 1Chan or 1Chan N Samp), I read 2.5V.

  When I read AI7 simultaneously with all the channels that have a greater number of channel (i.e. AI8-15), I read 2.5V.

  When I read AI7 simultaneously with any channel that carries a lower channel number (i.e. AI0-6), I read 2.34V.

  ?????

  For example, if I read AI0:15, I read 2.34V on AI7.  If I read AI0:7, I read 2.34V.  If I read AI7:15, I read 2.5V.  If I read AI7:10, I read 2.5V.  If I read AI6:7, I read 2.34V.  And so on.  Any combination of playback channel which includes results AI0 AI1, AI2, AI3, AI4, AI5 or AI6 during a misreading on AI7.

  All channels read because they are supposed to, no matter what channel is included in the job.  AI7 is the only one that illustrates this behavior.

  I wrote code for the acquisition of data for 10 years now and I have never seen anything like this before. The behavior is consistent.  I am sure that it is a hardware problem with the Special Commission that I use.  That's the advice of my customer, I don't know when they bought it, but I think they have had for years.  I doubt that ever, it has been calibrated.

  I guess it's more I'm curious than anything else - what on earth would cause this behavior?

  I'll tell my client to replace the card, if really I just asked my own knowledge.

  
  

• Control of stepper motor

  Hello.  I have a problem with a prototype of movement control, and I am at a loss to know where to look next.

  I run a computer running Windows XP with LabVIEW 8.6.1.  The computer contains an NI PCI-7332 motion controller nine connected to a card NI UMI-7772 control a P70360 stepper drive.  I'm trying to run a command of CTP 11 ELF 11 Danaher engine with little success.

  All the lights on the boards are the appropriate color.  I followed the implementation of the steps in "Getting started: P7000 series Stepper Drives.  I have the correct indicators in the interface of MAX, and I can not even the motor to hum a little when I press 'Start', but the axle does not turn.  I check the wiring of the driver of the engine and both Multimeters and diagram agree that, at worst, to run it back.  This is before any programming LabVIEW.  I'm just trying to make the engine start with MAX.

  Any help would be greatly appreciated as this is my first time setting such a system.

  Ben

  Hi Ben,

  Looks like your engine, and if your player are not compatible. 11 ELF 11 CTP is supported by the P70530 and not by the P70360 (see table 5 in the P7000 manual start-up). The P70360 (320 V) bus voltage is too high for this type of engine. Please contact your local branch OR for redemption for the right hardware options (you will need to swap the drive or motor).

  In addition, I highly recommend using the software tools P7000 in combination with a cable (P/N 780099-01) series to set up the reader. It gives much more flexibility to use switches dip and you can optimize the performance of the drive and motor by adjusting the inductance of the individual motor drive.

  Kind regards

  Jochen Klier

  National Instruments

• One or more ActiveX controls could not be displayed because that is: 1) your current security settings prohibit running ActiveX controls on this page, or 2) you blocked an editor of one of the controls

  Well this problem started a week ago. When computer first starts or restarts (I did not open any program still!) I get this message,

  One or more ActiveX controls could not be displayed because that is: 1) your current security settings prohibit running ActiveX controls on this page, or 2) you blocked an editor of one of the controls

  I know this usually occurs with internet explore, but as I said I do not have anything yet open. I've activated all the active X controls in internet explore with no luck. I searched the web for active x forums and blocked the editor and followed all the instructions in the error message (most of them see enabling active x) but without success. I am an advanced user (15 years and more), but it has left speechless me. If I try to open "Services", I get the same error. When I opened my anti virus, it opens but it is just a blank page. I know that my anti virus is working well.  Also if I open internet explorer, I get a blank page, if I go to a website (enter it or go to my favorites) it works fine. I've deleted all the temp, historical, cookies etc. etc. (use CC Cleaner and other programs to clean) but if reopened once again it says white. If I use help and you want to see a help topic that it is said (may not display due to problems of congestion or network, check connection) but internet works fine. I know that I have not a virus (a lot of people in the forums think it) I scanned with Bitdefender, Eset Nod32, Super Anti Spyware pro, Malaware Anti Malawarebytes, Spybot, Stopzilla, etc. etc. and did not find a virus (in safe mode) there are many people on the web with the same problem (with the same and some with different programs). This problem seems to be random (does not affect a certain program) I tried for a week now and I'm stumped! Anybody have ideas that I heard yet?

  Thank you if you do!

  Hi Morksr2d2,

  As you mentioned that the problem reappears as soon as you run the anti-virus program, it seems that we found the cause of these error messages at startup.  I would like to recommend that you Uninstall the antivirus & check if the problem reappears. This should also allow you to make changes on the services tab in system configuration utility.

  Later, reinstall the antivirus program.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Parental controls for music/movies/TV shows that have been downloaded

  Windows Media Center:

  Is there a way to add parental controls for music/movies/TV shows that have been downloaded if they have the xml file with the sides included?

  Hello

  There is nothing in Windows 7 by default, adding parental controls to shows or downloaded movies.

  You will need search for 3 third-party software that will do what you want.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.