HP probook 4440 3fo error s
Hey guys this my first post here so thank you to all who read this post...
the problem is going well I have this probook 4440 s. It does not boot to windows and gives error 3f0 and sometimes when I try to run w7 the ERD it show boot bcd 0xc00000e...
Another think I tried to do a fresh install of windows 7 and it showed no hard drive to install the windows... at the moment there is nothing else that I can find... you guys have an idea? Help, please!
PD: also, I ran the hp system diagnosis and short test drives and he went, but today I wake up and try to run it again, it said this disc hard short dst failed...
Hello:
You will need to replace the hard drive and reinstall the operating system.
The hard drive has failed.
Tags: Notebooks
Similar Questions
-
Support bi-ecrans for ProBook 4440 S
I have a laptop HP ProBook 4440 S. I have also two monitors - one HP1740 and a HP LA2405. I want to set up two monitors using the laptop. The graphics card can conduct both monitors? If so, I have to use an HDMI cable with a DVI - D connector to plug into the LA2405. I would like to use the D-15 standard cable to connect the 1740. If it works, I would be able to stretch the 1740 Office, or would they have to be distributed as two separate screens?
Thank you
The ProBook s 4440 (technical Quickspecs at http://h18000.www1.hp.com/products/quickspecs/14306_na/14306_na.pdf) can support 2 outputs video or 2 external (hdmi and vga) or LCD and 1 external. Even if HP does not support dvi hdmi adapters, they are available and seem a bit cheap, so can be purchased to test. Both hdmi and vga ports are usable
-
How to change the settings of the bios on my hp ProBook 4440 dedicated to increase video ram?
I want to increase to play better games.
How to change through the bios I don't know.
Help me pls.
Thank youThe days of being able to change RAM in BIOS went Bye Bye a few years ago. It was back in the day.
You can't make changes to the video RAM settings in BIOS.
You can reduce the resolution if you want to increase performance in a menu of own game options, but at a cost of resolution.
-
I was at work DJ in a club and my computer froze and unresponsive. After that I turned off to restart it gave me this 3FO error code... I need to know how to recover my files on there I have a * beep * load of music that I can't afford to lose.
Hello
It sounds like the hard drive may have failed, so first try the procedure below to see if you can save your files.
A possible way to try to recover your files from a disk non-boot is to follow the process described in the link below. The CD of the Ubuntu operating system you create can launched from the CD alone (IE it doesn't have to be installed on the hard drive) and I've often found to successfully extract data even a hard failure. When you created the CD, follow the instructions and see if you can save your existing files.
Kind regards
DP - K
-
ProBook 4440 s: the network driver Installation
I had Windows 8 on my ProBook 4440 s... reinstalled the operating system with Windows 7 family (64-bit).
Since the reinstallation I don't have drivers for my wireless network card... can't seem to find them online. Have you tried several Aetheros Netwrok drivers from the HP site, but may not be the right ones b/c I get the message "' 802.11a/b/g/n Wireless adapter not found device: the device may not be present or could have been ejected/disconnected from the system" "
Can someone point me in the right direction?
Add' Info - t.
For the network controller hardware ID
PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00
Thank you
Hello:
You need this driver for this model of the wlan card.
-
ProBook 4440S missing TOO MANY DRIVERS after installing Windows 7 Home Premium repair
Hello I had to reinstall Windows after a hacker locked my system. I had not had the unit for a long time, so don't lose tons of files or important data. (Yay!) But, I had not had the time to really get to know my system either... so now I have the new number to try to determine what the material is that is not recognized. I thought I'd come to hp.com, find my drivers to download and DO. Instead, I ask help in the identification of "devices", OR to be pointed in a direction that could help me get there? (When I got to the driver download page and seen everything there was to choose from - this is when I'm here!)
(HP ProBook 4440 S under WIndows Home Premium 34 bit)
I have yellow exclamation points on the following devices in Device Manager:
1. base system device
2. base system device
3. Ethernet controller
4 > network controller
5 Com Simple PCI device
6. USB controller
7 unknown Device
If he wasn't SO MANY pilots, this could be simple!
One who can help? I'll appreciate it of course!
Thank you!!
Hello:
Here are links to the drivers you need...
First install the chipset driver and restart.
Basis of the system of the unit (both):
Ethernet controller:
Com Simple PCI device:
USB controller:
Unknown device:
There may be several model HP wireless cards installed in your laptop, so I can't post just the driver for the controller network without more information.
Follow these steps, and I'll post the link for the network controller driver, you must...
Go to Device Manager, find the other devices category, click the network controller needing drivers.
Then click on the Details tab at the top of the control of the network window.
Now, you see a drop-down list of property and it is set by default to the Description of the unit.
Drop down on it and select the second item in the list (Hardware ID).
After the first string of characters that start with PCI\VEN.
-
HP probook 4440 s: audio problem
I use hp probook 4440 s... After you have installed windows 8.1 the microphone does not work... someone can help me solve this problem...?
my product id is C1B73PA #UUF
Hello
Try to install the driver IDT HD Audio 8.1 on the following link.
When the installation is complete, restart the laptop.
Kind regards
DP - K
-
ProBook 4440 s: ProBook 4440 s Wifi is not connecting
Reinstalled Windows 7 Professional 64-bit on ProBook 4440 s. Manage the connection HP telling me that Wifi is disabled. Tried to go into the Device Manager to see the ID of device, but failed to install a driver that I found (used another PC connected to WiFi, then transferred the driver for the flash player). I watched it work on 5 different forums (including this one), but no instructions given on any forum works with the ProBook s 4440. Any help would be great!
Unfortunately, none that I know.
If it belongs to an institution, I recommend that bring you to their service COMPUTER trouble.
-
ProBook 4440 s: HP install can not protect the tool on Windows 8.1
Hi support them.
I use Probook s 4440 and install windows 8.1 pro x 64,.
I want to install hp protect the tool for fingerprinting, but then I have install this Setup program got an error message "Microsoft .net framework3.5 is required. In fact, I have already installed .net framework 4.5.
CLEA
Install security HP Client Manager
Please read the Solution
-
A question for the masses...
I have a nice 4440 S Probook I bought at a very reasonable price. I upgraded the CPU of the i3 - 3110M for an i7 quad-3632QM stock and factory 4 GB of memory has been upgraded to a 8 GB faster and bigger. That said, I'd LOVE to upgrade the (in my opinion), ended ugly mast of 1366 X 768 display a brilliant 1600 X 900 better, brighter display. I intend to buy a display of 1600 X 900 and the corresponding display of Probook 6470 B cable. The obvious question: will it work?
BTW, it has the standard Intel HD4000 graphic chip. Help!
Thank you for your positive responses.
Do not try. very likely you are wasting your money. Poster correspond to the panels, bevels, connections, hardware, etc. Even beautiful thought, I would stay away from THIS upgrade
-
ProBook 4440 s cleanly put to upgrade to 8.1 Windows overheating 64bits
I took my Probook s 4440 which comes preinstalled with windows 7 64 bit (2 years ago) use it with an SSD in the last 8 months.
A week ago I did the following:
1. open Notepad
2 - took the time to thoroughly clean all vents and fans. almost no dust was found.
3 - do you have a clean install of Windows MS 8.1 64bits.
4 installed MS Office bloatware and other applications.
5 - installed 'certain' HP utilities like power plan a selected balanced both plugged and unplugged
Since I upgraded to 8.1, I noticed that the computer overheats to the point if freezes or slow down.
As for the fan, I noticed that the fan starts at random (or not) when the computer is overheating.
I noticed that the overheating starting on hard drive (to the left of the mouse pad)
If I put my hand on the left vents, I can feel the hot air coming out.
No, its not heavy CPU usage. Sometimes, the laptop is slow but hot.
Questions
Can what spare parts I use to replace the fan with a greater RPM?
How can I control the fan to be always on (I really don't mind a bit of noise in order to save my investment)
Am I missing some HP software that will control the overheating?
I see that HP has no fan control application and internet tools such as SpeedFan seem not to be able to manage the fan.
It's a workbook perfectly. Suggestions are welcome.
Thank you
does anyone have a little app to control fan for some probooks (HPFanControl).
Personally, I would go back to windows 7, windows 8 - 8.1 has a lot of problems & bad drivers.
-
HP Probook 4530 s: Error Message 'wireless module not supported 702.
I have a HP Probook 4530 s standard stock I had since then and all of a sudden in the last month it comes up with this error at startup "this wireless module is not supported then was disabled 702. I have not changed a thing since I've owned this laptop so I use the card wireless that put HP. I can occcasionally work around (reboot several times) but it is very frustrating, especially when I want to get something done quickly and I have to plan restarting, disconnect the battery etc. game. Is there a solution? I was looking for a solution. As I understand it there is an error with the BIOS and the wireless card is not on the whitelist. Which is ridiculous because it is what came with the laptop!
Any ideas or suggestions?
There is a update the BIOS of your system as dated March 2015 [F.60 Rev.A]
Although it does not specifically address your problem, it may be useful and HP 'recommend' the update.
-
I did an update on my ProBook s 4440 and after I he has put a lock on my laptop code. I can't seem to enter a plus! HELPPP!
QA.
There is not generators of master password for ProBooks or EliteBook and most laptops class business.
You will need to contact HP.
http://WWW8.HP.com/us/en/contact-HP/WW-contact-us. html? JumpID = reg_r1002_usen_c-001_title_r0003
Or look at this link.
http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-password-reset-utility
Or replace the BIOS chip.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
-
HP Probook 4440 s CPU upgrade?
Hi, I have a 4440 s HP's Probook and I'm a little confused as to what UC my cell phone is compatible with. My question is to understand the type of socket. I found sources that my laptop has a G2 cpu socket that has something (that I can't fully grasp) to do with PGA988. I would buy an Intel Core i5 3380 M if possible, but it is listed as being for socket PGA988. Is this compatible with laptop CPU? I know that G2 and PGA988 socket are related in a certain way and they might be the same, but I can not find a concrete source that says that it is
McSquid wrote:
The GPU is on the processor so its just Intel HD 3000 (another reason I want to upgrade so is id 4000 HD)
The chipset is Intel HM76
It is a chipset of Ivy Bridge. You can go ahead with the upgrade.
-
HP ProBook 450 G2: Error 0xc0000225
Hello!
I had a new HP ProBook 450 G2 with windows 8.1. I did the flash drive recovery. Now, I wanted to install windows 10 DEU. Now got 0xc0000225 error code. Not even the recovery disk works. I really don't know what else to do.
Someone suggested during installation, to remove all partitions except the one. It is, does it affect my computer laptop warranty (?) so I have not tried.
Eager to help!
Hello
Please accept my apologies for the delay in replying.
As the integrated recovery partitions are deleted, you will need to use (such as DVD or Flash drive recovery) recovery media.
Here are the instructions to do:
https://www.YouTube.com/watch?v=NBrBJ7sAqTo and http://support.hp.com/us-en/document/c03489643
If you miss this recovery media, contact HP for their / http://h22207.www2.hp.com/us-en/contact-hp / http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Of course, if you don't feel confident to do this yourself, you can take your machine to the service - please see the Service Center authorized HP closest
Maybe you are looking for
-
When I saved a web page in pdf format, I found that the part of the page had not been saved. turning my samsung galaxy tthrough 90 dsgrees made no difference. also...I use a bluetooth keyboard, and I can't lower the keyboard with the apropriate key a
-
How to use multiple libraries?
-
dvt6 - 6 c 00: updated to the latest bios Wireless Card install/f1.b
Hello I would like to install a new wireless card to take advantage of the speeds wireless AC, I am looking for an update or the mod my bios of f1.b to my Dv6t - 6 c 00 due to the white list. I tried to use the HP Web site to check the updates for my
-
Satellite 2450-201: update driver DVD - IDE #1 error
Hello I need help to upgrade the dvd for my laptop model Satellite 2450-201 with internal dvd writer. I have LG and I got this message at startup: error IDE #1. Any suspicion that I speak with Dep. error tech and he said that the problem of compatibl
-
error due to suspicious activity on your computer, call 877-822 9492
Original title: Error message I have an error message appears and says "error due to suspicious activity on your computer, call 877-822-9492. is it legitimate?