HP Probook 4530 s: Error Message 'wireless module not supported 702.
I have a HP Probook 4530 s standard stock I had since then and all of a sudden in the last month it comes up with this error at startup "this wireless module is not supported then was disabled 702. I have not changed a thing since I've owned this laptop so I use the card wireless that put HP. I can occcasionally work around (reboot several times) but it is very frustrating, especially when I want to get something done quickly and I have to plan restarting, disconnect the battery etc. game. Is there a solution? I was looking for a solution. As I understand it there is an error with the BIOS and the wireless card is not on the whitelist. Which is ridiculous because it is what came with the laptop!
Any ideas or suggestions?
There is a update the BIOS of your system as dated March 2015 [F.60 Rev.A]
Although it does not specifically address your problem, it may be useful and HP 'recommend' the update.
Tags: Notebooks
Similar Questions
-
The upgrade from Vista to Windows 7
I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?Have you tried to do an upgrade installation or a custom installation? A custom installation requires you to back up your files and settings with Windows Easy Transfer and then reinstall everything after installing the new. If an update install does not install work, you need to do a custom.
In addition, a Windows 7 Anytime Upgrade will not work and you get a message from a platform if you have bought a UA and tried to use it with Vista. Vista upgrade requires a detail, a copy in the Windows 7 box.
-
I have a HP probook 6560 b with the motherboard 646964-001 REF.
Current BIOS: F.61 Rev.A
The wireless module is 631954-001 Ref. WLAN 6205 Intel 802.11a/b/g/n PCIe network map
I've looked everywhere and the WLAN module should be supported, why it doesn't work?
I have tried factory reset the BIOS and have a box to open with HP, but I am not getting anywhere.
Looking here it should be compatible?
http://PartSurfer.HP.com/search.aspx?SearchText=LG650ET
As long as the WiFi card has this label to the HP part on that number then your good to go.
REO
-
After a horrible experience with the upgrade of Windows 10, I re-installed Windows 7 Pro and had to reinstall all my programs. When I try to install the retail DVD of Lightroom 6 version, I got and error message that Lightroom does not support the Vista operating system. This is NOT Vista; It is Windows 7 Pro x 64 SP with installed updates. Installation stops there and will not continue! I then reinstalled my old version of Lightroom 5.2 (who has updated to 5.7) without problem. How can I bypass the installation process that incorrectly detects Vista?
Thanks for any help you might be able to give me. I really miss my 6 LR!
Hello
Try to force ambient light Setup to run in Windows 7 mode:
Right-click on the Setup file and select Properties option.
Then click on the Compatibility tab.
The value of the Windows 7 operating system and check.
This link can also help: try to install lightroom 6 on windows 7 get interface requirement not met windows vista not supported
-
I went into the backup from the control panel and its saying that no replacement has been set up... I tried several times, just to be sure that I had set up the backup on my computer before and it worked very well, I don't know what else to do... help
Hello
All changes made to the computer before the show?
Method 1:
Run the tool on your computer system file checker. You can check the link that will give you information on how to use the System File Checker tool to fix system files missing or corrupted on Windows Vista or Windows 7 below:
http://support.Microsoft.com/kb/929833Method 2:
Run a check disk on the computer. Follow the steps.
1. Select command prompt.
2. type chkdsk/r (note: there is a space after chkdsk)
3. restart the computer and allow to run the disk check.Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost
-
I've seen comments on this more soon but I can't find the discussion now.
-
no error message "no Modules compatible video Play.» Upgrade to the latest display drivers"
I have a dell studio XPS 435 MT with a Radeon HD 4670 and I'm not the first to initialize. I had the software for a year or two but has just been implemented. I get the error message "no Modules compatible video Play.» Upgrade to the latest display drivers' I made sure I have the latest drivers but there is still no start. Help, please! Thanks, Jeffrey
Please, start here: error 'Premiere Pro could not find capable video game modules | Start
If this does not resolve the problem, then please report the exact version of the creation and the types of content you are editing.
-
error message: "windows could not find a certificate to connect to the network.
My NetGear wireless icon shows this error message "windows could not find a certificate to connect to the network.
Hello
Did you change your computer before this problem?
You can follow the procedure in the article.
Unable to connect to the network: Validation and certificate in Windows XP and Vista errors
Alternatively, you can contact Netgear support to improve assistance in this regard.
Welcome to the NETGEAR support
-
Error message 'setenv.ini' not found during installation
I want to install the XP Pro version of the cd but I get the error message "setenv.ini" not found
Hello
This occurs if you install Windows from the Microsoft or Toshiba Recovery disk?
In addition, it would be interesting to know what laptop you have.The disc is maybe scratchy check it!
-
Error messages - rundll does not - occurs on my new Equium
I have a new computer satellite phone on Vista - about 4 weeks - and I get the error messages: rundll is not working, Windows graphical desktop does not work.
Should I return to the retailer or ask for help on this site?
Help appreciated - thank you.
Before contacting the retailer I recommend you to use recovery media supplied and reinstall the OS. I hope once this laptop will work fine as before.
-
Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate. Error message says Hello not activated. Tells me to go to the Control Panel then administrative tools and allow to Hello. I followed these instructions, but I can't activate Hello. What did wrong and how I can activate the Hello? My email is * any help is greatly appreciated
< email published by host >
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
Error message D: / / is not accessible on the Satellite L series
Problems loading dvd write error message D: / / is not accessible. Cannot find help in the user manual.
Is there something I am doing wrong? Do I need to load different drivers?
I have tried DVD-R & DVD + R discs.Hello guys
For me, it's stupid enough to write about the problem and not write what model of laptop you have. You have new models of laptops or some oldies? Do you use CD/DVD burning applications and which?
Please try to start the recovery procedure to see if the drive can read the recovery media. Please post the results.
-
Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll
Please reinstall a copy of the above file. where can I get a copy? and is it possible to download the start software and burn it to a cd? Hi FRANKGRIMES_945,
What is the model of your computer?
(a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.
(b) thereafter, follow this link & check if you are able to start correctly on the desktop.
Hope the helps of information.
Please post back and we do know. -
Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.
Hello
· What is the number and the model of the computer?
· What is the service pack installed?
· The meadow of operating system has been installed on the computer?
· Do you remember any changes made on the computer before the show?
Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx
You can also check: Error Message: Windows could not start because of the mistake in... : http://support.microsoft.com/kb/326671
-
Error message: Windows has not start because the following file is missing or damaged
This error sometimes occurs when starting upwards from my Win XP computer:
Windows could not start because the following file is missing or damaged. Windows root\system32\hal.dll. Please reinstall a copy of the above file.
the computer then complete the beginning upward and operate normally.How can I stop this error message?
Kind regards
Hello
· Since when are you facing this problem?
· Remember to make changes to the system?
I suggest to disable the startup items when the system starts up and then check if the problem is resolved.
How to disable programs that run when you start Windows XP Home Edition or Windows Vista
http://support.Microsoft.com/kb/270035
I suggest following the steps mentioned in the article below and check if
Error message: "Windows did not start because of a configuration of the disk of the computer problem.
http://support.Microsoft.com/kb/314477
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Maybe you are looking for
-
How to prepare used iMac for sale
I have an iMac opportunity running Yosemite 10.6.8 I want to sell. I have to wipe the hard drive and can't find a way to do it. It does not seem to have a recovery section of the disk that will allow me to use the disc utilities. How should I configu
-
I deleted Pages. How can I download this new without having to pay?
I had Pages pre-installed on my MacBook Air and had to temporarily remove. Now when I go to download it the Apple Store wants to charge me for the app. How can I get that back without having to pay for it?
-
I forgot the password for internet content
original title: help I have a password for my internet glad I forgot what do ido
-
How we prevent Skype for businesses to start at startup? I tried msconfig / startup but tab could not tell how to disable.
-
How to change the font color in live movie maker 2011
I'm used to using movie maker on vista, but this movie maker is very different. I need to change the font color... Help, please