HP Probook 450 G2: failure of the sd card

Similar Questions

• Qosmio X 70-B-10 t - failure of the graphics card

  Hello. I offen had failure that the graphics card driver hang up and recovered himself. But today, I got this failure to the course to watch live TV streams and it seemed to me that the laptop does not work correctly. I tried to restard and then I get this message: DRIVER_IRQL_NOT_LESS_OR_EQUAL (cmdhlp.sys). It must be the graphics card and I don't think it's a hd or RAM failure in this case.

  Any tips? Repair? New graphics card?

  Thank you!

  On this virtual path, it is not easy to say what can be the reason of this failure.
  Repair is always the last step. What you can do is to test the features using Notepad with "factory settings, without having to install additional software.

  What operating system do you use?
  Do you use the original display driver or some day?

• HP ProBook 450 G2: Replacement of the RAM HP Probook G2 450 x 64

  Is it possible to replace the RAM in my laptop HP ProBook 450 G2 4 GB to 16 GB?

  4.00 GB (3.97 GB system) + 32 MB video

  Intel Core i3-4030U CPU @ 1.90 GHz

  Yes, it can use up to 16 GB of RAM. Here is the Manual:

  Manual

  See page 3.

  Modules of memory (PC3L-12800 1600 MHz, DDR3L) 8 GB 693374-001

  http://www.Amazon.com/Kingston-Technology-1600MHz-PC3-12800-KVR16LS11/DP/B00CQ35HBQ/ref=sr_1_1?ie=UTF8&QID=1445859310&SR=8-1&keywords=693374-001

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• ProBook 450 G2: Upgraded to the 6th generation 4th generation intel processor core i5 to skylake

  My laptop is HP Probook 450 G2. And my processor is 4th generation Intel Core i5. So, I want to upgrade my processor CPU 4th generation intel core i5 to 6th generation intel processor core i5 to skylake. Can I put my 4th generation CPU intel core i5 processor in the 6th generation intel core i5 processor skylake? Pls tell me

  Laughing out loud

  You can't do this for a simple reason.

  The processor on the motherboard socket are not identical.

  4th generation Intel core i5 mobile CPU uses socket 1150

  6th generation Intel core i5 mobile CPU uses socket 1440

  It's a bit like trying to plug the power plug of the American unit to an electric outlet of the European House.

• ProBook 450 G2: Buttons on the touchpad Windows 10

  I recently bought a HP Probook 450 G2, with Windows 7 preinstalled operating system.  After the update to Windows 10 (bit 63) I found this one of the buttons on the touchpad is not operational.  I can still tap the touchpad for a single or double click, but it leaves me no option to use the right button of the mouse.

  I checked the drivers and found that they are updated to 19.0.12.0.  I tried also to reset the settings in the properties of the mouse, but had no chance to fix the problem.

  Can I use a mouse with the computer, which works very well, but cannot use the touch pad to the quick tips that I have not the time to get out of the mouse.

  Can anyone give me any suggestions or point me in the right direction to fix.

  jeffspark81

  after upgrade windows 10 you must upgrade the Chipset and Bios, and other drivers

  after update bios and chipset install please

  The system for Windows 10 default settings

  You then still have problems editing the Touchpad driver

  Open Device Manager go to the Touchpad uninstall the driver with delete option

  Install new drivers

  You should have, more tochpad driver installed uninstall first

• Failure of the graphics card on the Satellite A100-405

  Hello

  I have a Toshiba A100-405, which has a Geforce go 7600 graphics (specifications).
  Yesterday, playing a game, all of a sudden the frozen screen and showed a lot of horizontal stripes.
  I tried to restart the computer, but succeeded only in safe mode. The bands have not disappeared. (funny colors, such as low resolution, stripes, blocks, etc.)

  Question 1: Is my assumption that the graphics card is in correct failure?

  Question 2: Can this card easily replace? And if so, which would cost only? (in EUROS)

  Looking forward to your answers.

  Roel

  Hello

  These funny funny colors, as low resolution, stripes, blocks are called artifacts (adverse alteration in the data, introduced by a technical and/or technological). It seems that the dysfunction of the graphics card. To be sure, connect the external monitor to check. Talk about the replacement, if it is integrated in the motherboard, the entire motherboard must be replaced. It costs about 35% of the total price computer laptop, as you can see that it is quite expensive.

  Also, from my own experience I know, sometimes these artifacts occur because of the graphics card overheating due to dust. Do not be lazy to clean the laptop with the jet of compressed air. Otherwise, contact the ASP (SAV) and prepare the money.

  Welcome them

  Post edited by: Jeka-HE

• System does not boot: failure of the video card or viruses? I do not know...

  Here's the deal: on a computer running Windows XP Pro SP3. Athlon, dual-core processor (2.4 gHz); 4 GB of memory; NVidia GeForce 7300 video card; and a Western Digital SATA, I met a failure while watching a DVD (using Media Player 11) and now I can't start.

  I have been having problems for a few days with my Dell flat screen monitor "energy saving" mode because it has detected no signal. After playing with this and obliging to recognize a digital signal rather than the automatic detection, all seemed well.

  During the film, the picture froze, the sound became a loud, grating buzz and shut down the system.  It has restarted as usual, but then would not start the rest of the way, stopping at the Windows XP screen.  The progress bar froze and spinning to stop the drive.

  However... on occasion, for example when the system remained some time, I can sometimes start in safe mode (but still, it hangs when starting "mup.sys") or he will move to the XP logon screen and freeze it.  I replaced the mouse and keyboard (whiched USB connections) used with their equivalents of PS/2, but nothing has changed.

  When I try to start, I hear all the clicks Associates, snoring and whatever else as if the startup continues normally.  However, when it stops, I can't "see" it on my network.

  I have a hunch that it is a damaged video card because also the failure during the film and previous issues of monitor, when I hit the map to try to reinstall, he felt much warmer that it should have, but a video card failure would prevent initialize to top?

  Any ideas?  I'm all that.

  It does for me, but of course as I said in my previous notice of Disclaimer: I want to emphasize that you should not take what I wrote as a definitive diagnosis. I can't see or test your computer from here. I give you my opinion on your computer based on my experience as a computer tech and what you have written. MS - MVP - Elephant Boy computers - don't panic!

  I understand that.  I was looking for another opinion by giving an update.

  However, it certainly seems that the jury went.  It freezes even trying to boot in the BIOS setup.  Thanks for the directions.

• I presume that the motherboard is the cause of the failure of the video card on my alienware aurora desktop. Where can I buy a motherboard for this system?

  HI: Blues ray and dvd drives work. I checked the raid drives, test of redundancy having failed, too bad sectors. I presume that the motherboard is defective in this case for the video card failure. I see some white corrosion around the battery from the motherboard. I put other work disk drives into the slots on the drive. Where can I buy or upgrade the motherboard for this system? Thank you.

  The network cable is not shining, which confirms that the motherboard does not work.

• MacBook Pro 2014 - failure of the graphics card for the 2nd time in 2 years - no guarantee

  Hi all

  end of 2014, I bought a new 13 inch Retina Display MacBook Pro mid 2014 model (A1502, EMC2875). A few months later, the graphics card has failed - no obvious reason. Apple replaced. Now, the graphics card has not yet. Still, the mac worked perfectly well (no overheating of the noise, nothing) and all of a sudden - no understandable reason or external actions, the graphics card has failed. Unfortunately, I do not have a guarantee of more. At least, I can access my documents by connecting two Macs, so I hope that the material is not affected.

  My model (1502) apparently only has a single integrated graphics processor.

  My questions:

  • After some research, I discovered that Apple used to have these problems with the 2011 edition. They have implemented a replacement program. Does anyone know sth on this subject?
  • What graphics card would you recommend? How much such a graphics card? Where could I buy a cheap?

  Of course, I don't want to reuse the same type - guess I don't have to explain how @* #&! I'm after two times the same problem within two years after the purchase of a brand new MacBook Pro...

  I would appreciate any recommendations and links!

  Best regards

  Rahel

  -As you say, your Mac model uses the graphics processor integrated in the CPU chip. So, there are ios no replacement possible. The CPU is soldered to the logic board

  -The problem with the 2011 MacBook Pro was with the discreet Nvidia, not the graphics unit integrated in the CPU graphics unit.

  -When you went to an Apple store just says the genius of APple?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop.

• Satellite L350-153 black display - failure of the graphics card?

  My screen is black.
  I don't see anything.
  I have a Satellite L350-153.

  I also connected the laptop to an external monitor, but also not display. I guess that the graphics card is defect.

  Can I change the map, or is it integrated on the motherboard and where I can buy one?
  How mich cost?

  Thank you for having responded

  welcome them
  aburt

  Hello

  Hmm if he s really a graphics card problem then that would mean that a whole motherboard must be replaced.
  The point is that the graphics chips more be removable, but the chips are special modules that can be purchased separately

  In any case, you should get in touch with a local ASP (partner) in order to obtain more details, perhaps that the chip graphic is ok and other malfunctions of the party that knows the technician could run tests and could tell exactly which part is dead

  Welcome and good luck

• Printer Officejet Pro 8620: officejet pro 8620 failure of the wireless card

  E-all-in-one printer Officejet Pro 8620 was strange for the past few weeks - the blue light would remain solid but nothing prints not the touch screen would not respond and it would be not closed when the power button was pressed.  Now, it has gotten worse - he sees not the wireless network (other devices work well) and prints a blank page to print the report.  I ran the printing and scanning Dr, but he did that tell me that the printer cannot detect the network.  I tried to reset to the default factory settings wireless, but it still does not detect the network.  I think that the wireless card is not (it is exactly one year and two weeks since I bought it).

  Is there a way to confirm my suspicions?  Is there anything else that might be causing these problems?  If so, how to replace the wireless card?  I worked with electronic equipment for years and I'm very comfortable, replacement of parts and components of computer devices.

  I did the factory reset and went through the installation procedure as directed.  The printer still can't find wireless network and print report still produces just a white sheet.

  I'll contact the HP Support

• Necessary activation after the failure of the graphics card

  Hello.

  My graphics card died an hour ago and I am currently using the integrated graphics chip. Windows 7 indicates now that activation is required which seems quite odd. My problem is that I can't get a new card until I return to my office in 5 days.

  So my question is. I have to go through this again when I get the new card. IE I have to do it twice?

  See you soon

  Update. Office 2013 now tells me that I need to reactivate it. If I put the dead card back at will, it stops the request?

  Hello

  I am happy that the problem has been resolved itself.

  Please post back if you have other Windows problems and we will be happy to help you further.

• Failure to the video card - Dell R210 II [MS]

  Hi all

  I have this server with the video card that does not work.

  The serial number is theNOTE from the ADMIN: maintain the label removed by privacy policy >.

  Please I urgently need an offer for this repair by mail.

  Thank you

  Votino Alessandro

  Rohde & Schwarz Italia SPA

  Salvo Votino GIS.,.

  E-mail modificata e preventivo reinviato.

  Speaking saluti

  Manual

• HP Probook 450 G1: What is the compatible RAM configuration for my laptop?

  Product number: F6B14PA ##ACJ

  Serial number: (deleted content)

  I'm from the India. I need to upgrade the RAM for my laptop. I'm looking for 4 GB of RAM of 4 GB existing upgradation. I need while seeking in the online market. What is the configuration of my laptop RAM. I need help for that matter. Please help me.

  Another issue is that there will be no problem if there are different volts at the two RAMS cards in slots

  If you associate brands and densities (single and double face) then you run in a greater chance of the laptop won't start.

  That is why it is deemed be advised to always identical (in all respects) modules when you upgrade memory in a laptop ofr desktop PC.

• (Redirected) Failure of the graphics card

  I have a laptop 15R 5010 N inspired with graphics ATI Radeon HD 550v. Recently my PC could not start Windows. Then I started it in safe mode, but the display had stripes and points in all directions. After running the PSA test, he showed graphic card failure. What should I do?

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.