System does not boot: failure of the video card or viruses? I do not know...

Similar Questions

• I presume that the motherboard is the cause of the failure of the video card on my alienware aurora desktop. Where can I buy a motherboard for this system?

  HI: Blues ray and dvd drives work. I checked the raid drives, test of redundancy having failed, too bad sectors. I presume that the motherboard is defective in this case for the video card failure. I see some white corrosion around the battery from the motherboard. I put other work disk drives into the slots on the drive. Where can I buy or upgrade the motherboard for this system? Thank you.

  The network cable is not shining, which confirms that the motherboard does not work.

• Failure to the video card - Dell R210 II [MS]

  Hi all

  I have this server with the video card that does not work.

  The serial number is theNOTE from the ADMIN: maintain the label removed by privacy policy >.

  Please I urgently need an offer for this repair by mail.

  Thank you

  Votino Alessandro

  Rohde & Schwarz Italia SPA

  Salvo Votino GIS.,.

  E-mail modificata e preventivo reinviato.

  Speaking saluti

  Manual

• my system does not know the USB ports and the camera, win 7 x 64, asus k53z

  Thank you

  Hello

  1. are you not able to connect the device via the USB ports?

  2. What is the brand and model of the camera?

  Please provide us with more information on the issue, you face to help you.

  You can visit the link of the article of Microsoft that will guide you on how to ask questions below.

  Suggestions for a question on the help forums
  http://support.Microsoft.com/kb/555375

  You can run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/

• Upgrade the video card on Satellite X 200-20 g

  Hello everyone

  I'll find a way to have my 8700M GT updated on my X 200 laptop.
  I paid for it more than 2000 and I paid for 2 years warranty.
  A few months later, I discovered that some of the new Toshiba are equipped with 9700 m GTS!

  I know that the X 200-20 G is having a mxm graphics card which is removable to be upgraded (not being is not part of the motherboard).

  I couldn't find anywhere in the Toshiba site, where I can ask to buy a new graphics card, or if I can send my laptop and ask for an upgrade price.
  I suppose someone who has paid a sum of money for Toshiba can be listened to, or get a special offer to swap its model to the newest one after even not a year of use.

  I really want to upgrade the video card, and I don't really know where to find advice or information about it, other than on the side of Toshiba.

  Thanks to everyone or admin, to let me know how I should do, or process.

  Kind regards
  Chris

  Hello

  Read the knowledge base of Toshiba, I created this article http://aps2.toshiba-tro.de/kb0/FAQ7A01ZW0007R01.htm

  It may be interesting for you.

• my system does not start upwards - don't stop progression blue bar that goes round and round. I can boot into safe mode and safe mode with networking mode.

  my system does not start upwards - don't stop progression blue bar that goes round and round.  I can boot into safe mode and safe mode with networking mode.

  Hello

  As you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

  http://support.Microsoft.com/kb/310353

  If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

  System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

  That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

  I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

  Help or direction is appreciated.

  original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

  So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Pavilion HP 630: this system does not have the minimum requirements

  installation of the graphics driver for windows 8.1 64 bits in my laptop (i3 processor) been error in this system does not have the minimum requirements

  Hello:

  Your laptop is not supported by HP for W8.1.

  See if the driver W7 support page for your laptop works.

  Install manually if auto installation does not work.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: SP52195.exe

• After you insert the disc in the drive, the system does not recognize f

  * Original title: Windows Media Player Windows 7 problem

  After having inserted the disc in the drive, the system does not recognize f indicating that a disk has been inserted.  Rattling coming from player. HP Pavilion Notebook g series

  (Moved to music, photos and video)

  Hello

  Welcome to the Microsoft community.

  According to the request, I understand that your system is unable to recognize the F: drive after inserting a disc. I appreciate your efforts to solve this problem.

  The issue could be due to one of the following reasons - the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Given the clicking of the drive I suggest you to clean the optics on the drive by wiping with a barely damp q-tip.

  If there is a possibility of cables in bulk. I suggest to remove the power supply, then make sure that the cables at both ends. Remove and replace firmly. For laptops, you can often clean power and contacts data with a pencil eraser.

  1. Open the Control Panel.
  2. Click on Device Manager and select CD/DVD.
  3. Double click on the drivers tab.
  4. Click update drivers and right click on the Uninstalldisk.
  5. Reboot- it will refresh the default driver stack.

  See the following Article in the Microsoft helps solve problems with CD or DVD drives.

  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems

  See the Microsoft support Article for CD or DVD drive not recognized by Windows or other programs.

  https://support.Microsoft.com/en-us/KB/314060

  Try these steps and let us know the results for assistance.

  Thank you

• Backup and restore error "the system does not have the specified path. (0 x 80070003) »

  Original title: Backup and restore SkyDrive errors

  Backup has encountered a problem during backup of the file C:\WINDOWS\System32\config\systemprofile\SkyDrive\My Documents. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the file C:\WINDOWS\System32\config\systemprofile\SkyDrive\My music. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the file C:\WINDOWS\System32\config\systemprofile\SkyDrive\My photos. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the C:\WINDOWS\System32\config\systemprofile\Podcasts file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem in videos C:\WINDOWS\System32\config\systemprofile\SkyDrive\My backup file. Error: (System does not find the specified path. (0 x 80070003))

  The above folders/files have been written not the system image.

  For my mistakes, I uninstalled skydrive and deleted the shortcut created in the bookmarks and folders moved to another location remove skydrive folder and re-run the backup and restore tool.

  Then everything worked well for me.

  Saved once installed skydrive...

• 64-bit with 4 GB of RAM installed; system does not boot

  I bought and installed W7 64 bit so that I could use the full 4 G of RAM installed in the machine.  Clean install after format but W7 would not move past the "Starting Windows" screen

  Microsoft is absolutely useless as Acer support.  Very disappointed in both.

  So I started by disconnecting equipment: card reader.  Try again.  Nope.  2nd screen.  Nope.  Remove the piece of 1 G of RAM.  There she goes. Now, I have everything set up and a few days later reinstall the 4 G of RAM.  Still, no way in front of the window startup.  Try changing on the sticks.  No go.

  So while Vista would go with the 4G installed, it wouldn't use it, W7 will not work with it.  Max 3G.  What gives?

  I think it must be in the BIOS, but what?  I also read that the removal of the video card and reinstall that after install the last piece of RAM will work, but I'm pretty skeptical.

  System information:

  Name of the operating system Microsoft Windows 7 Home Premium

  Version 6.1.7600 Build 7600

  Another Description of the OS is not available

  Manufacturer of operating system Microsoft Corporation

  Name of the system XXXXXXX

  System manufacturer Acer

  Aspire M1100 system model

  System Type x 64-based PC

  Processor AMD Athlon (TM) 64 X 2 Dual Core 4400 processor +, 2300 Mhz, 2 Lossnay, 2 logical processors

  Version/Date BIOS Phoenix Technologies, LTD 6.00 PG, 10/10/2007

  SMBIOS 2.5 version

  Windows directory C:\Windows

  System directory C:\Windows\system32

  Boot Device \Device\HarddiskVolume1

  Canada regional settings

  Hardware Abstraction Layer Version = "6.1.7600.16385".

  XxXxxxx\Xxxxxx user name

  The time zone Pacific standard time

  Physical memory (RAM) installed 3.00 GB

  3.00 GB total physical memory

  1.81 GB available physical memory

  6,00 GB total virtual memory

  4.65 GB available virtual memory

  Page file space 3.00 GB

  Paging file C:\pagefile.sys

  Windows 7 works fine with 4 GB of RAM, the chances are that it's a hardware problem. If you run Vista with 4 GB of computer is probably not anything with the BIOS. Have you checked your RAM to find errors?

  Check your RAM (memory) to find errors.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• My system does not work properly. I want to change it. Can I transfer my Windows 7 license on the new system?

  HI I WANT TO CHANGE MY SYSTEM AS MY SYSTEM DOES NOT WORK THERE ARE A FEW PROBLEMS WITH THE EQUIPMENT INSIDE SO I WANT TO CHANGE IT AND I WANT TO USE MY LICENSE WINDOWS 7 ON MY NEW SYSTEM CAN DO AND HOW? I HAVE A COPY RETAIL

  First of all, make sure that Windows 7 is no longer in use on the current computer.

  Click Start, type: CMD
  Right-click on CMD
  Click on run as administrator
  At the command prompt, type: slmgr.vbs - upk

  Press enter, this will uninstall the product key of the computer and to the evaluation mode, you are now free to use it on another computer. If you experience problems, try to activate by phone:
  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

  The mode currently of the installation process, you will need to be activated or it will go into reduced functional mode. You have the option to install another version or edition of Windows or get a product key for it. Alternatively, you can put the system as follows:

  To format drive:

  1. Insert the DVD of Windows 7
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on "repair your computer".
  6. Select the operating system you want to repair.

  7. click on the command line

  8. at the command prompt, type: FORMAT C: /.

  Press enter on your keyboard

  Type y for Yes

  Press enter

  Please wait while the drive is formatted.

  Type exit to close the command prompt, and then click farm to shut down the computer.

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

• Error: The system does not license for the OS image. The system cannot find the path specified

  Hello

  I copied the image of Windows Embedded 7 T510 using HP thin client capture on a USB port. Now, I'm trying to load this image in an another thin client Embedded Win 7 T510 via a USB port.

  However, when the customer starts using this image of the USB, I get error below.

  "Error: the system does not license for the OS image! The system does not have the specified path.

  What solutions do you recommend.

  Thanks in advance

  Solution:

  I tried to install it on a Linux Thin client... Is there had this error.

• Account Internet preferences system does not recognize the password for my AOL account... and so mail does not read the email in my AOL account

  Account preferences Internet system does not recognize the password for my AOL (Internet) account... and so Mail does not read the email in my AOL account

  Mail asking me to "Enter your password for [my AOL account] in Internet accounts."

  When I enter my password Internet accounts says it is "Impossible to verify the account name or password."

  iMac (24 inch, early 2009)

  Processor clocked at 2.66 GHz Intel Core 2 Duo

  Memory 8 GB 1067 MHz DDR3

  OS X 10.11.1 (B 15, 42) El Capitan

  Remove the password in Keychain Access (Applications/Utilities). While there, menu Keychain Access of relief.

  The problems of Keychain - see post of khati