HP Probook 4520 s to restore to the factory settings

Similar Questions

• Cannot restore to the factory settings

  
  

  I have the Acer Aspire 7741z laptop. The computer has frequent problems, and I want to restore it defaults. I've already saved important files and had planned to do a full restore to the factory settings, but the eRecovery program does not work for me. It starts the process, says that it needs to restart, check I want to replace the data on the hard drive and restarts. The problem is, it just restarts. No recovery process, no reset factory default. Alt + F10 during boot process does nothing.

  I checked the partitions still exist, and I made no changes to the system since the purchase (about formats, etc.). Of course, I'm no longer under warranty period, it seems getting direct support from Acer is not going to happen.

  If anyone can help? I really want to restore this laptop to its default settings.

• After a restore to the factory settings, where personal files are?

  I recently had a problem on my laptop (gateway) that prevents Windows to boot the system.  I went through the automatic tests on splash screens.  Files were good, the disk check was good, went to a restore point, but still was not able to start.  I got a message that there was no specified "configuration change".  So I chose the option to restore factory settings.  I didn't need a disk to do - it took place without no boot disk required.  There was a message related to the restoration who said that my files could be stored on the hard drive partitioned part.  I couldn't get to my personal files anyway, so I decided to take the chance to do the restore and hope that Windows would save my stuff.  Well, Windows is running, but I can't find my files.  The page of my computer shows 2 hard drives, 'Local' and 'Recovery', but I don't know how to access recovery or if my files are still there.

  Is there a chance that my stuff is still in this machine, or I'm just the GROUND?

  Thanks in advance for any kind souls who can solve the riddle!

  Hello

  "Recovery" partition will be the software that was used to perform the recovery to factory settings.

  We should never touch except to make recovery disks, failure of hard disk for you to reinstall Vista on a new hard drive.

  Windows does not save your data when you perform a restore to the factory settings.

  Your recovery software factory settings is provided by the gateway.

  It is an Option in their software.

  It is the gateway to this topic information.

  "Restoration with automatic data backup.

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418su532.shtml

  All files and existing files are copied to the C:\Backup folder on the hard drive and a new copy of Windows is installed.

  You will need to contact Gateway Support and ask them where to find your data saved their recovery process if the information above did not save where gateway said it would.

  http://support.gateway.com/us/en/support/default.aspx

  See you soon.

• Satellite Pro L450d-12 x help restore to the factory settings

  I want to go back to the complete factory settings (as if windows has been reinstalled)
  There is no repair option in the advanced startup options (are there all the other options)
  If I go into disk management, I can see
  (C)
  recovery_data (D)
  (anonymous) (OEM partition)

  all the these have the status of healthy.

  There recovery.wim in the d drive, and a winpe.wim

  There are a lot of educational software that came on the phone that I do not have the cd. So, I don't want a new installation of windows.

  I tried to do a system repair disc, it upward with could not be created (0 x 80070057) so I'm not able to boot from the cd

  Is it possible to reset to factory settings complete with recovery or partition without a name?

  For future referance that is needed (a? or other? or both?) windows restore disk 7 oem 32-bit pro (version of windows I use) or the pro L450d-12 x recovery disk toshiba satalite?

  Thanks in advance

  > Is it possible to reset to factory settings complete with recovery or partition without a name?

  In General, you have two options:
  Either you try to retrieve the laptop using recovery disk as described here:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm
  or you will recover the laptop using the Toshiba Recovery disk which you likely has not been created in the past using Toshiba Recovery Media Creator. Right.

  Well, if the recovery of HARD drive does not work (whatever the reason), then you must use the recovery disc. If recover disk has not been created in the past, you can order the CD here:
  http://backupmedia.Toshiba.EU/landing.aspx

  This info has been helpful?

• HP Envy 15-k201na: restore to the factory settings corrupts the files/windows Boot Manager

  I wanted to restore my computer laptop back to factory settings. So I went into settings and navigated to the update and recovery, recovery and then clicked the option restore factory settings. I had several partitions then asked me if I wanted to delete all of my drive or to remove all the windows disk was installed on. I clicked on the remove all option. Everything was erased from my laptop, I think that the boot partition has been altered to. Now when I start my laptop 0xc00000000f error code occurs and he said: 'you will need to use recovery tools. If you don't have any facility (such as a disc or USB device) support, contact your administrator for PC or PC/manufacturer. »

  Is there a way to fix this? My laptop still warranty HP on this subject.

  A system image restore fixed my PC; I used recovery media to recreate the image on my PC.

• How to extract data from your laptop with crushed Windows Vista without restoring to the factory settings?

  I ran a few updates, but before you restart the computer, I deleted many files.

  The result is that my Vista does not start, and only offered solution is to restore to factory State, which is not acceptable for me because I need data from the HARD drive.
  Y at - it an easy way to recover data from the HARD drive, or should I contact? Thank you.

  Need help on MS Answers was my last option before calling a service.

  But, luckily, I found a way. I just change the settings in the BIOS for SATA, Vista started, I restored some of the deleted files, and voila - it worked. Another reboot, BIOS have been changed on the previous settings, and now it works perfectly.

• Can someone help me? my pc not to remember my display settings after a system restore to the factory settings

  I had to restore my pc to factory settings. And now I am unable to use my lcd hd tv as a monitor... I could do before you restore my pc. Any help with this would be much appreciated

  my pc not to remember the settings.and of display for Office moves to the right

  Hello

  Method 1: I would suggest to run set to go to the following link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  Method 2: I also suggest you follow the link below in the form of measures: http://windows.microsoft.com/en-GB/windows-vista/Troubleshoot-multiple-monitor-problems

  Hope this information is helpful

• Z1 HP: Restore to the factory settings without disc

  Hello

  I'm trying to clean my computer (HP Z1) to its factory settings.

  I got my computer with windows 7 installed, so I don't have an instalation disc.

  I tried the advanced recovery methods, but I only have the options of using a system image I created earlier or reinstall windows.

  Nicky

  Hello

  You can get assistance on the HP Enterprise Business Forum since you have a class business PC.

• My computer was not restart and I did a restore of the factory system, and it would not load the new screen?

  My computer has been restarted not and I have to click the button 3 or 4 times just so he can work. I use it for school so I really need to work and so I did the system back restore to the factory settings and it did again when the screen would not load but now it works. I left it only after I did 8 hours? that is the problem or do I do it again? I mean restoration?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if you can doot:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the verification and startup repair if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• How to find the password to iCloud after restoring the factory settings.

  My wife has an iPad.  I stick with my iMac and had nothing to do with the implementation of its iPad.  She had a problem recently that would require an update of iTunes.  When the update has downloaded a message appeared saying "your iPad can't be updated; you need to restore it to factory settings. "We did the restoration and has a splash ACTIVATE IPAD screen.  He asks as the inside diameter and the password used to configure iCloud... which my wife do not remember.  He also says that my i.d. Apple (my email address) does not allow to open the iPad.  What to do?

  If you do not have credentials, start here: http://iforgot.apple.com

• 1st generation ATV dead. Orange light but no screen and no resetting of distance.  I tried direct connection to Mac and iTunes open and he's not here.  Is it possible to restore to the factory without screen or remote work

  1st generation Apple TV is dead. Orange light but no screen and no resetting of distance. I tried direct connection to Mac and iTunes open and he's not here. Is it possible to restore to the factory without screen or remote workin

  I guess you tried maintained low men together for about 6 seconds - silver 1 ATV that will restart to the diagnostic partition but who would rely on the hard disk is functional and if it was ok that wouldn't work with the logic board failure.

  I guess you have not fed and attempted to restart.

  In case your AppleTV think it is paired with another remote try Menu and left arrow for 6 seconds - the light now intervenes when you press the buttons on the remote?

  Also, it could be in the video mode bad - try Menu and upward arrow together for 6 CES switch video modes, but implies that he actually started OK.

• Reset to the factory settings without restoration. Why do I see previous contacts?

  I have a new 5 iPhone.

  I added 6 contacts, 2 new downloaded applications. Saved on iCloud and iTunes.

  I had a very old Apple ID with an email address that I no longer use.

  I created a new Apple ID online by using this:

  Change your Apple - Apple Support ID

  Probably because of something, that I was wrong, there is a conflict between this new Apple ID and one on my iPhone.

  No problem. Because I only had 6 contacts and two additional applications, I decided to reset to the factory settings. I do NOT accept the offer to restore a backup.

  So I guess I now have a new phone out-of-the-box.

  In fact, my 6 contacts were always present. The two extra apps were not present.

  I would be very grateful if someone could explain why the 6 contacts are always present.

  I wonder how many other things could be hiding somewhere, which would not be present out-of-the-box.

  You can use a computer and connect to https://www.icloud.com/ and check the Contacts app it (under the two identifications of Apple as I'm not sure of the exact sequence of events that you did). If they are there and if you have settings > iCloud > Contacts under tension, which could explain from whence they came. With this setting, any changes to the Contacts is immediately synchronized between iCloud and the phone as soon as it is connected to iCloud.

• How to restore the factory settings on NB520?

  Hello

  Can someone tell me how to restore the factory settings on a NB520?

  Sale on and you want to wipe everything and restore to original for purtchaser.

  How this is described in the document s user manuals.
  Start your NB and press F8. Choose repair my computer and just follow the menu on the screen.

• HP Pavilion TouchSmart 15 Sleekbook how to restore the factory settings

  I just need to know how to restore my HP Pavilion TouchSmart 15 - b167ca Sleekbook back to the factory settings. This laptop came without the cd.

  cath9999

  goes on Windows

  http://Windows.Microsoft.com/en-us/Windows-8/what-happened-to-backup-restore

  Or F11 and read the Manual Page 61

  http://h10032.www1.HP.com/CTG/manual/c03601748.PDF

• Satellite L350D-213 - restoration of the factory without disks

  Hello

  I came to this page because the Web, so many people say you don't need a disk and many others say that you do! {Massive headaches} CONFUSED!

  After last week, ending up with the UKASH virus on my computer, a friend helped and explains to go into MSCONFIG in safe mode and disable all, then I could finally get into my normal settings and do a scan to wipe it. I ran ad-aware, but later removed that he had fallen behind EVERYTHING, including IE. Then, I saved all my stuff and deleted from my computer to make room. I then did some general research and followed the instructions. "speed up my performance" followed by a few scans/clean ups and Defrags.

  I don't remember what I did to remove panic and difficulty Ukash and performance thereafter, except that I know that some applications do not work, because of a name of a file I know I deleted as 'my speed' and some I do not know why they do not work.

  After spending TWO WEEKS on this issue, it is better, the UKASH went, my performance is faster BUT the strange problem of a file, and I'm done with him! I want to do a factory restore to put all rights that I can and have done wrong.

  My question is; Can I do a record of WITHOUT restore factory, I don't remember if I've ever had a recovery disk, but if I did, I don't have any him more as they have become lost or misplaced.

  What are my options?

  My biggest fear is I'm at half way through the restoration of the factory and it prompts for a disk and I don't have. I also drive HARD recovery on my laptop on drives C and D.

  (System Restore does not work for me either, I have no restore points or can I create one, so another reason why I need to do a restore of the fctory)

  Kind regards.

  In your situation you should not spend a lot of time speculating on what the people are saying. In the user s manuals document described clearly how it works with the recovery image installation, creating recovery image and what your options are.

  In my opinion the best solution for virus affected system is new and clean install of the OS. It's certainly more radical solution but, I think of easier and faster way to have own OS again. The first step is the backup of the data, if possible and recovery image installation (factory settings).

  Recovery image can be installed on two ways:
  1 as described on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm HARD drive recovery facility
  2 with recovery disk created recovery image installation

  I presume you didn't create this disk so that you can do now is to order on https://backupmedia.toshiba.eu/landing.aspx

  In any case, try it please with option 1 and send feedback.