HP ProBook 4530 s - fresh out of the box installation SSD

Similar Questions

• Brand new, fresh out of the box, DSC-HX50V is having all kinds of problems

  On my third attempt to get a HX50, sometimes finally B & H Photo today.  I'm so excited as I opened the box, then plug it in to make sure that the battery is charged.  I unplug, pop in my SD card, turn it on and do the initial setup routine.  I finished the initial installation, the lens comes out and I think, «Here we go...» "But I see on the screen, rather than the other side of the room?  'Access... '. "I see it on the screen for the next two minutes until the screen turns off alone...  Press the power button two times and it comes...  Leave would be for an hour while I desperately search the Internet to see if this is normal (without success, btw).  Click on the button of power twice, its always there...  Mocking me... Tease me... Make fun of me... Why oh why am I tortured that way?

  Finally... I try to turn off the camera by holding down the power button...  No luck.  I eject the SD card (to be noted that the access lamp is not lit). It's always "for access to the...» "So I eject the battery to force power off.  Pop the battery, turn on the camera, the lens retracts, lens extends, I see the General information on the screen (battery level, 20 M, Focus tracking, etc...) and no image... Nothing...  Just a white background, black... Try to turn off and the power button turns off just the screen, but the lens remains extended and the screen lights up immediately when the power button.  What the...? ! ?

  Then... What I have is a camera that will only show that "access to the...» «When a SC card is inserted, will show the General information but no picture when the SD card is not inserted, the shutter button does nothing, movie button does nothing, watch play button "to access to the...» "for a while before returning to the general info, change the mode, all other buttons dial mode only do something if I shortly after you turn on/off the camera (if I let the screen press on shut down, or turn off the screen with the power button, they will cease to respond to the pressures on) and the power button turns on the camera and turn off the screen , but do not turn off the camera.  Oh Yes... The Toolbox in the menu of the screen blanks, but never sends me into the menu of the box tool.

  Then...  I was wondering... I'm SOL?  Can I reset the device to factory settings and start over possibly fix everything that's wrong?  Is this a defective unit that I have to return to the B & H and hope they can replace in less than a lifetime?  ???

  Thanks for all your help.

  ~ Kiss of Azrael ~.

  Too bad... I understand that if I plugged the camera, then lit, it lights up in playback mode. In playback mode, all the buttons worked, I was not only able to reset the camera, but also able to format the SD card, which got rid of the ' access to...» "Unfortunately, none of these things toned down the main issue of the camera being completely unusable designed for the purpose of taking a photo and video recording, so I guess it's back to the store and either I'll treat the excessive expectation and additional spending, to get it replaced, or just go with another camera altogether which maybe actually available in a local store... That's life...

  ~ Kiss of Azrael ~.

• I have new asus GL725G fresh out of the box, the windows 10 and the nvidia geforce 960 m card video.

  PhotoshopCC seems to have a problem with the display driver boards how to operate?

  Hi cathygeo,

  You need to update your graphics card drivers: drivers | GeForce

  Kind regards

  Claes

• Calculation of minority interest in HFM - does it out of the box?

  Hello world
  I'm a freshness in Hyperion Financial Management. So let me apologize for the issues that may be too naïve!
  Is there any HFM module that provides minority interest calculations out of the box?
  If not, can someone give me any sample to start rule?
  
  Thank you
  Chrystelle
  
  PS: Oracle EPM Version 11.1.1.3

  Hello

  Here are the ways that we have calculated the minority interest in the application I've seen:

  (1) either use Partsnonversees + Partsversees system and then launch of the calculation of the property accounts. This fill up accounts system (percentage of consolidation) PCon, POwn (share of the Group) and PMin (PCon - POwn = minority interest).
  Or enter directly the value of those accounts. For example, enter PCon = 100 and POwn = 70 => Pmin, minority stakes will be calculated as 30%

  (2) then, in the consolidation rules (void consolidate in the rules file), write the split of reserves like this:

  KSM Con A # 'SourceAccount_Reserves',-1, ""-online which will remove the source account
  "KSM Con A # 'Group_Reserves', POwn," "-online which will calculate the total reserves * owned percentage => put the amount to the account Group reserves.
  "KSM Con A # 'Min_Reserves', PMin, '"-online which will calculate the total reserves * minority percentage => specify the Min amount reserves account.

  Against KSM function works like this:
  KSM Con (destination), (factor), (the audit).

  Hope it helped you.

• The remote control comes charged out of the box or it must first charged?

  The remote control comes charged out of the box or it must first charged?

  It is usually quite busy, mine was about 85% when he arrived. It's a question about the pre purchase or you have a problem with your remote control works not.

• Minor scratches on SS 2 series out of the box

  I am very happy that my watch stainless steel series 2 has been delivered today! Hope you are all enjoying your. After an inspection of the watch, however, I noticed very slight/minor/extra fine scratches on the screen, mainly on the top and the bottom of the screen where the curve begins, but also a bit in the middle. Once again: scratches are very minimal and is only visible when shine your flashlight of the iPhone (or any other light RAM) directly on the screen and looking closely in some angles. It seems that this has happened during production, probably during some polishing of the watch or other routines (because the stripes are mainly on the curves of the screen and pointing in the same direction). Really in trying to decide what to do about... Some of you SS series 2 owners would be so good to check that out and let me know what your watch in bright light looks like? Once again: it is very difficult to see if you need to use your iPhone light therapy lamp or other direct light source. I read a few threads on the coating that was applied to the screen (also described in the manual). Some suspect that this coating scratches easily, however I think it is strange that the watch is delivered striped out of the box. Especially since this Sapphire screen must be very hard to scratch.

  Make an appointment at the Genius Bar in Apple for the service. If you need a Apple Store - find a store - Apple. Take it within 14 days from the date of purchase for Exchange do for a not scratched. We cannot help you here, and these forums aren't complaints because Apple isn't here. We are all of the users like you.

• iPad dead out of the box

  My brand new iPad mini 4 is dead out of the box. I had for more than 10 hours, but no sign of life. Clues on what this is and what I should do next?

  That I would take at the Apple Store for further diagnosis. If that's all new device to take to the store as soon as possible.

  You can also see a few suggestions here If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

• NB250 restore out of the box after upgrading Win8

  Hello

  I have improved my NB250 Notebook for windows 8 (it came with windows 7 starter).
  Now, I want to go back to the out of the box again with windows 7 starter.
  The manual said to do I need to press the 0 (zero) key all turning on my pc. (I did before once).
  http://support.Toshiba.com/support/staticContentDetail?ContentId=2728214&isFromTOCLin k = false
  Page 49.
  Now when I press 0 simply freeze the first toshiba screen and has no effect until I have unlock the key.
  I suspect its power because I installed the windows 8.

  Can someone help and find a solution?
  Is it possible to manually run the toshiba recovery software?
  Or maby a way to recover the disk storage internal in another way?

  Thank you
  Dolev

  Hello

  I don't know if your note is a US or European but manual model displayed must be the American version.
  In any case, its operation is quite similar.
  Laptop comes with preinstalled OS (recovery image) also saved original recovery image on the HARD drive.
  If long HDD is not defective and laptop to factory settings you will be able to install the HARD drive recovery image.
  If you check this page 56 s manuals, you can see explanation and detailed instructions how to create a recovery media (USB) that you can use if the HARD drive is faulty or the installation of HARD drive recovery won start t (your situation).

  I presume you didn't create this recovery USB support so now you have a problem. After your own installation of OS version your NB does not have factory settings anymore and you will not be able to access the recovery image recorded and the ability to boot the recovery image installation. Only way to have once again is installation of recovery using recovery media image.

• Tecra R940 - 1 hr: what happens to work out of the box with Linux?

  I'm considering buying a laptop Tecra R940 - 1 hr.
  I'm going to use it with linux (ubuntu) system.

  What happens to work out of the box?
  Should I expect any problems with the display/network/wifi/sound?
  What about camera, usb 3.0 and bt?

  What is possible to work? Suspend? Function keys? Fingerprint reader? SD reader?

  What's not to work?

  I run Ubuntu Studio (12.04) on a Tecra A11-ST3504, and everything works perfectly.

  However, your computer probably has the latest UEFI instead of the BIOS, and this causes problems for some with start-up and installation.

  If the live system starts and runs, I'd go for it.

  I'll put the admins the trouble to make their usual warning: "of course, Linux is not supported by Toshiba."

  Enjoy!

• HP Pavilion 17 Laptop Touch t: brand new out of the box HP Pavilion 17 t Touch M7H91AV laptop is so slow

  Last night, I took my laptop HP Pavilion 17 t Touch brand new out of the box and it is so slow.  The startup is slow.  All operations running slow.  The use of the internet is slow.  I tried to transfer files from Carbonite on this new computer and just the process of realization of this installation took me a half hour.  This morning I had to reboot and it took 5 minutes.  I only know enough about computers to be dangerous, so I don't mess with many settings myself.  This performance unacceptible on a new computer.  This is certainly the slowest computer I've ever owned.  All solutions that anyone can offer (as a reminder, I need instructions step by step)

  MLubb

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about serious problems with your HP PC brand new and wanted to help.
  
  Since it is a machine relatively new, instead of hurt for hours to fix yourself, why not just let HP fix it - for free!
  
  You must contact the HP Customer Support directly so they put you in contact with HP Tech Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  Good luck
  
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.
  Please click on the symbol of the thumbs-up to the left of the answer key to say thanks fopr my help.
  ========================================================================

• How to restore Toshiba NB250 to out of the box?

  I have a laptop Toshiba NB250-108, is a German keyboard layout if it makes a difference. I have no CD drive or the DVD software.
  I tried the system restore to out of the box several times with no luck, hold 0 (zero) button on start up, but only takes me to start modes.
  Any help would be thank you very much.

  > I have tried restoring the system to out of the box several times with no luck, hold 0 (zero) button on start up, but only takes me to start modes.

  try pressing f8 at startup

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  If you can not start a recovery procedure, it means sth wrong with it (deleted/moved)

• Cannot start Satellite L500 - new out of the box

  Help!

  Just the laptop out of the box (new) - lit.
  Windows 7 Administrtaor account is locked and another user will not recognize the password / name.

  Help!

  Hello

  Try this:
  Switch on and press F8.
  Select repair my computer then HARD drive recovery.
  Drive recovery HARD should restart and you should be able to reinstall the OS.

  Good luck

• A wi - fi network reset to "out of the box.

  Hello

  Sorry to ask what may be a very basic question, but how do you define a wireless router - more WiFi settings of your laptop - back to the way they were when they came out the box? In other words, I want wireless and portable routers that I forget they know so that I can set up my wireless network again as if I put for the first time.

  The reason is a little involved, but for the most part, I had a set up wi - fi network and launched from a Terminal Airport Express and it worked very well. During the holidays I then bought an Airport Extreme because I wanted something a little better for my base unit and then I wanted to use the Express as an Extender. How I wanted to now, I had not tinkered with something that was not broken, as the addition of the extreme for the network was not as simple as I was expecting and my wi - fi network everything seems to go wrong, like my internet connection. I had someone to configure two routers (understand I can I have messed up a setting when I was trying to implement) but still no luck - he would work for a bit and then my internet would just go down. Using Airport utility, showed that routers and internet will run for a few seconds and then would stop and I would lose the connection.

  I work and live on a college campus for the internet at home is powered by an ethernet into the wall jack, just as you would in an office. Through contact the COMPUTING helpdesk, they managed to tell me (although partly because of techno speak and a little bit of a language barrier that English isn't the first language here) I got away from. What I could gather was something like the two routers SSID must be different because they were "beating" and this caused the network to automatically shut down at home? Unfortunately they treat only to provide internet service home and cannot help with the problems of wi - fi.

  I am pursuing other means to help (we are a University of science and technology research, after all!), but something I thought was if I could just reset routers and WiFi my laptop 'memory' of the network and start over as if I was there for the first time. I don't want to plug the router and it says something like "this was part of the XX network."

  Anyone know how?

  Thank you very much

  To configure your router from Apple to its "out-of-the-box" configuration, you must perform a ' default ' reset on this subject.

  For the laptop, if it's a Mac, then you will need to follow these steps for "erase it."

  Start with the first steps (1 - 1). If that is not accomplish what you're looking for, go to step 2.

  1a. remove preferred networks

  System Preferences > network > Wi - Fi > advanced > tab Wi - Fi

  Under "Preferred networks", delete the networks you use regularly in the list.

  1B. Airport deleted keychain entries

  Launch the application "Keychain Access", located in Applications/Utilities.

  In the windows on the left side: Select login for keychains and "All items" category.

  Click on the 'Genre' filter at the top and search all "AirPort network password" entries... and remove them.

  1 c. Add Network favorite (s)

  System Preferences > network > Wi - Fi > advanced > tab Wi - Fi

  Add preferred networks using the button «+»

  Restart or disconnect you, then back in.

  2. move the System Configuration files

  (Note: you will need to restore your network connection settings.)

  Go to Macintosh HD/Library/Preferences

  Move the SystemConfiguration folder on the desktop.

  Restart your Mac. (Note: OS X will rebuild the folder & files that are now sitting on your desk in the library > location of preferences.) If this does not resolve the problem, you can move the folder back to its original location.)

• Reset to out of the box

  Bought one out of the box from HP all-in-one of Cosco.  In the name of the previous owner and files.  Do not have the administrator password.  How can I reset?  Or should I return it?

  Hello

  Try to do a "factory Reset" by pressing the f11 button as soon as you turn the machine to run Recovery Manager - for more details, see the link below.

  Recovery options - Windows 8

  Recovery options - Windows 7.

  Kind regards

  DP - K

• Toshiba satellite L755-S5170 how to recover out of the box state

  How to get out of the box state. I know that it will not be that difficult, I had products HP which makes this task easier!

  Moved to windows

  Hello

  Regarding your question, it is out of our reach and you can contact your computer manufacturer.

  Thank you.