HP ProBook 470 G2 portable PC: upgrade Windows 10 for Intel core i7 4510U, BOF 64 - bit Windows 8.1

Similar Questions

• Is it possible to upgrade a Slimline for a core 2 quad s3720y? The LGA 775 socket right?

  Is it possible to upgrade a Slimline for a core 2 quad s3720y?

  On the product information it says that it only accepts the Pentium Dual Core, Core 2 Duo, Celeron, and xenon.

  It would be really nice if I could move my PC to that so I can run WoW at 30 frames per second on the smaller settings of at least.

  It will not be a system bottleneck because I'm adding new GPU, RAM and PSU.

  Probably the Radeon HD 4850 or some other medium to high range GPU.

  Just something better than a Geforce 7100 integrated.

  FYI WoW allows to launch large on this PC, but its getting worse and worse as you get older.

  To tell me if I can upgrade to a Core 2 Quad on this system and perhaps don't pair no a gpu bottleneck in the construction also.

  You don't have to get the right side I can just mod the case cool and fix it.

  And for the love of the Lich King tell me how to clear the RAM to make it run more quickly or some other nonsense like that.

  HE HAS NEVER WORKED FOR ME AND IT WILL NEVER WORK FOR ME!

  Otherwise thanks

  Last thought: my monitor is 1680 X 1050.

  Hello:

  I am attaching the link card motherboard for your PC. A C2Q isn't a supported processor.

  http://support.HP.com/us-en/document/c01357110

  Motherboard supports the following processor upgrades:

• Compaq Presario CQ57-339WM upgrade CPU for Intel Core i3 2310 M?

  Can I upgrade the processor? : http://ark.intel.com/products/52220/Intel-Core-i3-2310M-Processor-3M-Cache-2_10-GHz

  He was given to me by the guardian after that I asked them if they had an available 988 PGA processors

  Hello:

  Here is the link to the service manual for your laptop. Chapter 1 lists the supported processors.

  http://h10032.www1.HP.com/CTG/manual/c02948186.PDF

  Processor Intel Core i3 2310M is not supported, but the 2330 m.

  The Celeron processor you have runs on the chipset Mobile Intel 6 series as either i3.

  http://Ark.Intel.com/products/59570/Intel-Celeron-processor-B800-2m-cache-1_50-GHz

  By the book, I must tell you that it won't work.

  So, you can try to install at your own risk. It may work correctly, or it may not work at all.

  It all depends on if the BIOS has the microcode for the i3-2310 and other firmware supported processor.

• ProBook 470: ProBook 470 poor WiFi after upgrade to Windows 10

  Hi all

  There are so many issues report on WiFi on Windows 10 problems, but I'm not really mine.

  I'm running the ProBook HP 470 with WiFi Atheros 9000 series card. It worked fine with Windows 7 Professional 64 bit.

  A couple of weeks, I decided to upgrade to Windows 10. Everything works fine, except the WiFi. I can connect to the WLAN and network speed and the signal strength is perfect, but after a while (minutes or even hours), he falls abruptly to the bottom and my router WLAN even States disconnected, but he'll fix itself after a while. I can force the "self-repair-speed" of disabling and enabling WiFi again.

  But, this is no good solution, WiFi has to work reliable all the time when not moving and it work perfectly with Windows 7. I was hoping that Microsoft and hardware vendors manage drivers after one year of version 10 of Windows, but seems not to be the case.

  I have already installed the latest driver for HP download site, but it is already a year old, and it was the same thing as Windows / Microsoft has done while Windows Upgrade. Therefore no change to be expected.

  Before that I go down again to Windows 7, what can I do? There are a few other pilots who could interfere with WLAN and might not be updated? (More of the WLAN driver I don't have other day manually because I count for the Windows upgrade process.)

  Volker

  The laptop is to date, according to the release of Windows 10.

  Anyway, it doesn't work well, that's why I decided to downgrade to Windows 7. Now it works again as it is supposed to.

• Driver Bluetooth for HP probook 470 G1 (D9P03AV #UUF) running Windows 8.1 64bits

  Hey guys, I just tried my ps3 controllers to connect to my laptop and I realized its not detecting not not my bluetooth adapter.

  IM on a g1 470 probook with card wifi realtek 8188 EA, is the integrated bluetooth adapter?

  I tried all THE drivers on the support page says bluetooth realtek driver for win 8.1 which do not have a realtek bluetooth adapter.

  My probook 1 470 t even no bluetooth?

  or is it a problem of windows 8.1 driver

  Thank you hp

  Hello:

  The number for your specific product 470 G1 does not come with built-in bluetooth.

  I can tell because the Realtek wireless card uses your laptop is a single band, bluetooth card.

  If you want a card with BT wireless, see Chapter 3 of the the service manual for the list supported without wireless/bluetooth combo cards and replace the Realtek card.

  You need to get one of the maps in the maintenance manual and it must have the part number HP on it or more likely won't work.

• ProBook 470 G2: HP Probook 470 G2 10 problem Windows

  Hello

  I bought a laptop Hp ProBook 470 G2 with windows 8.1.  I upgraded the Windows Windows 10. Everything is working great except for the fact that the Fn key does not work with F3, F4, F9 and F10. The only combination that works is with Fn + F6 and F7 for the sound. For HP Probook 470 G1 model there is a driver for the HP Hotkey support keyboard but is not compatible with the G2 model. I have the latest drivers for the video. Cheked all. If you can help me or give me a HP Hotkey Support driver that is compatible with this model, it will be nice.

  Thank you in advance.

  Try to install the sofpaq following Hotkey for Windows 8.1 in compatibility mode.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943843&swItemId=ob_142323_1&swEnvOid=4158#tab3

• ProBook 470 company G1 64-bit drivers

  Hello

  I am currently undertaking a task of building of a HP ProBook 470 G1 on Ent of Windows 7 64 bit...

  I'm having problems with the drivers for it (as expected), I wonder if anyone can help with the driver either exact or compatible for:

  Hardware ID;

  \VID_0E8D&PID_763E&REV_0100&MI_00 USB - shows just as BT in device management

  PCI\VEN_8086 & DEV_8C3A & SUBSYS_1940103C & REV_04 - PCI Simple communications controller

  PCI\VEN_8086 & DEV_8C31 & SUBSYS_1940103C & REV_04 - USB controller (USB 3.0 I think)

  ACPI\HPQ6007 - unknown device

  Thanks in advance for any info/help people can offer

  Pete

  Hi, Pete:

  Here are links to the drivers you need:

  PCI\VEN_8086 & DEV_8C3A

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123657_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  PCI\VEN_8086 & DEV_8C31:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_128883_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  ACPI\HPQ6007:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_127112_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  \VID_0E8D&PID_763E USB:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_127978_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• ProBook 470 4: G4 470 Probook HD-support

  I'm about to order a probook 470 G4 with 256 GB SSD. I want to add the hard drive of my old laptop has died to add some disk space in case I need it (I have the disk anyway). Watching the service manuals for G3 and G4 of the Probook 470 versions I see 2 different numbers for media:

  In the G3 manual I see 828147-001, it says in the manual of G4 906002-001. Part numbers for him are however the same for both revisions of the 470. This suggests that it is the same or similar part.

  I can't find the number for the G4 online (except Eastern Europe). the G3 version however is available here in the Netherlands. can someone explain the difference? The 828147-001 will fit in the G4?

  When all else fails, look at the photos-G4 and G3

  

  

  Just as I described above, these devices are similar because they are a rectangular metal frame that is screwed on a hard disk of 2.5 inch laptop, but they are different. See how the mounting holes and flanges are different? They mount in the chassis of the laptop in different ways. You could maybe take a set of slender beak clips and remove the small clamps and sealants and make one of these work in space designed for each other, but which would defeat the purpose of firmly bolting the drive hard to the framework so it transfers the shock on the framework and not on your hard drive.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP ProBook 470 G3: upgrade memory and storage in the HP ProBook 470 G3 17.3 "

  Hello

  I would like to buy HP ProBook 470 G3 17.3 "after reading the review of this laptop in Notebookcheck.net site,

  The laptop has a large 17.3 display, I think in ZBook but is too expensive so I need Quadro GPU or CPU high range this ProBook G3 17.3 "is the best choice as I thought... by the way

  My question on the model with the product number: T6D90UT

  CPU: Intel® Core™ i7-6500U with Intel HD Graphics 520 (2.5 GHz, up to 3.1 GHz with Intel Turbo Boost Technology, 4 MB cache, 2 hearts)

  RAM: 8 GB of SDRAM DDR3-1600 (1 x 8 GB)

  Internal drive: 1 TB 5400 RPM SATA

  Display: 17.3 '' diagonal backlit flat antireflection FHD LED (1920 x 1080)

  GPU: AMD Radeon R7 M340 - 2048 MB, Core: 1021 MHz, memory: 1000 MHz, DDR3, 64 bit interface

  Website of notebookcheck and HP site says the laptop has DDR3-1600

  http://www.notebookcheck.NET/HP-ProBook-470-G3-core-I7-6500U-Radeon-R7-M340-notebook-review.155142.0...

  http://store.HP.com/us/en/PDP/laptops/HP-ProBook-470-G3-notebook-PC-%28energy-star%29-t6d90ut-ABA#SP...

  While the HP parts store said that the portable DDR3L?

  Memory module 8 GB 1600 MHz, DIMM DDR3L PC3L-12800 (SHARED)

  Reference number: 693374-001

  Visit this link please

  https://parts.HP.com/hpparts/Search_Results.aspx?mscssid=709EC0F980AD4FC3A887C0C5C3DB5C46&SearchIn=P...

  It's great so far but what make me confuse is the price of RAM, there are two parties with the same name, the two net price is $209.00 (it's too expensive there technical error or what)

  I can buy 16G. B (8 x 2) Kit from Newegg in the 57 to 100 such as price range below

  CORSAIR Vengeance Performance 16 GB (2 x 8G) 204-pin DDR3 SO-DIMM DDR3L 1600 (PC3L 12800) laptop computer memo...

  Priced at $ 69.99

  Case latency: 9

  Time: 9-9-9-24

  Voltage: 1.35v

  Multi-channel Kit: Dual Channel Kit

  Model #: CMSX16GX3M2B1600C9

  Item #: N82E16820233587

  But I say that if I could, but the same part in HP it will be better for the stability and the use of long date because the series HP's ProBook made with too many test and the part use inside, he is selected to make the laptop to run higher stability.

  If the price is right and it's expensive so can I but the corsair with latency case kit Timing: 9-9-9-24 and tension: 1.35v, is also the RAM inside the laptop DDR3L with voltage: 1.35v

  Another question if I want to use the SSD for the system slot m2 inside the laptop only used there not I think to buy

  SSD Samsung 950 PRO - Series 256 GB PCIe NVMe - M.2 SSD internal 2 inches MZ-V5P256BW

  and as a primary partition for the windows system and the 1 TB drive will be secondary disk for my files is that fine or the laptop works with some LAGS and slow.

  Here is the Service Manual:

  Manual

  It has doors on the bottom so is very easy to upgrade. It takes DDR3L-1600 low voltage (1.35) up to 2 x 8 modules for total 16 concerts. It is the specified memory:

  8 GB (PC3L-12800 1600 MHz, DDR3L) 670034-001

  It has a slot of the WSSD m2 using modules with this form factor:

  

  If you need assistance more let us know.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• ProBook 4520 s: lack of features on a ProBook 4520 s after upgrade Windows 10

  Hello dear community

  Long story short: I have a HP ProBook 4520 s and yesterday I upgraded manually (with the tool provided by MS) Windows 7 Pro to Windows 10 Pro. Everything went very well and smooth and it works perfectly well until now.

  The problem is that some of the features of the laptop no longer work. Here are some examples:

  -Highlight the option on touchpad

  -built-in camera

  -Some FN buttons like the one for the brightness of the screen while others (for example, the volume and email) working

  My reasoning is that it lacks certain drivers or these functions are somehwat is not compatible with the new OS (it's a 5 + year old PC after all), but I could be wrong. I'd like to hear some suggestions and opinions on this.

  If someone needs to my specifications complete, there are:

  Operating system: Windows Pro 64-bit 10
  CPU: Intel Core i3 330M @ 2.13 GHz 61 ° C Arrandale 32nm technology
  RAM: 4.00 GB Dual - Channel DDR3 @ 532 MHz (7-7-7-20)
  Motherboard: Hewlett-Packard 1411 (CPU 1)
  Graphics card: monitor generic PnP (1366x768@60Hz)
  512MB ATI Mobility Radeon HD 4500 Series (HP)
  Storage: 1043GB Western Digital WDC WD1001X06X-00SJVT0 (SSD) 42 ° C Black2
  Optical drives: DTSOFT device CdRom virtual hp DVDRAM GT30L
  Audio: AMD High Definition Audio Device

  Thank you for reading. All the tips and comments are appreciated.

  Cap.

  Hello

• HP Probook 470 G2: Recovery 8.1 of Windows on a new drive

  I have a HP Probook 470 G2. The original disk is fine, but I want to migrate to an SSD. I did a restore USB and replaced with a 120 GB SSD HD. It is much less than the size of the windows on the original disk partition so I don't see a problem with that.

  Having exchanged the disks and booted from the USB, I chose "reset windows" and everything seems to go well until 74% when I'm "there was a problem of resetting your PC", with an option to restart.

  I found a thread here where there are similar symptoms, but because I am using a new drive I don't think I can replace the drive in the middle of the recovery.

  I saw some videos on YouTube that show a HP Recovery Manager in Windows itself (which I don't have) or in the screens according to press F11, and I don't understand that either.

  I have to correct, then restart. Choice of troubleshooting, I get Refresh (does not work, because the disc is empty), refresh (arrives at 74% as I said) and advanced. Advanced led system, System Image recovery restore settings, Start Up repair, prompt command or UEFI firmware.

  As I have said that there is no HP recovery in Windows itself, I used a Windows procedure, but he said the HP Recovery disc in the middle of the construction so I assumed that he had built himself ok. It's driving me crazy now, should not it lasts migrate to a better record, but I have not found a conclusive answer via Google or HP pages where my post here.

  Any ideas? My position of strength, it's that I still have the HARD intact original disc so I did not burn bridges.

  OK, so you pouvez use a recovery USB disk to install on a smaller disk. It's just that something was wrong with my recovery USB drive. I have a friend (with the same laptop) to create a recovery on his drive and it worked.

• 4340 proBook s: 4340 Probook s camara doesn't work anymore after upgrading WINDOWS 10

  Internal to the device doesn't work anymore after upgrading WINDOWS 10.

  All the drivers are up to date.

  I also downloaded the HP device drivers, but they offer several types.  I don't know what device to install.

  Also, I don't know what I can do.

  If someone can help me...?

  Thank you.

  The problem is resolved.

  Not in the way I wanted to (using the internal camera), but I bought an external camera.

  It works without any problem.

  So for me the problem is resolved.

  Thank you for given applications.

• ProBook 470 G0 network controller drivers

  Hello. I have trouble with the drivers for the network for ProBook 470 controller.

  After the installation of new windows no driver does not match this device.

  Help, please.

  Hello:

  Here is the link for the driver you need.

  I gave you one of a consumer notebook because business PCs site is down and has been walking all weekend.

  They must have some problems there.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127448-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 6521374 & sw_lang =

• ProBook 470 G2: Probook 470 G2

  Dear HP

  After the installation of Win 7, two unsolve problems

  1. a PCI driver cannot detect

  

  2. the function and F9 and F10 key cannot adjust the brightness of the screen.

  Please help to solve. I already try the solution below.

  • http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/ProBook-470-with-2-unknown-Devi...

  Hello:

  You need this driver for the dev of pci.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_146748_1

  Have you installed the applicable graphic driver for your laptop?

  You will not be able to adjust the brightness of the screen, unless the graphics driver is installed.

  If you have installed the graphics driver, then the only other suggestion I can offer would be to install the Hotkey Support driver if you have not already done so.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943843&swItemId=ob_154892_1&swEnvOid=4059

• HP Probook 470 G1 - FN key does not!

  Hello!
  
  First of all, sorry for my bad English language.
  
  I just bought new computer HP Probook 470 G1, and I can't do the Fn F7/F8 or F9/F10 command which is useful for the brightness and volume of work.
  Does not work when I press FN + F3 computer go to the mode "sleep", but other functions. I tried to download HP Quick Launch Buttons (International) , HP Softpaq Manager Donload, try changing the options in the BIOS and still nothing...
  
  Someone has an idea how to make these buttons work? I'm going to lose my mind...
  
  Thank you everyone for help!
  
  EDIT: I use Windows 7 ultimate x 64, if that helps.

  Hello @MHorvat9 ,

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forumsfor a better answer.

  Have a wonderful day!

  Mario