ProBook 470 G2: HP Probook 470 G2 10 problem Windows

Similar Questions

• 4540 proBook s Sleep Mode problem Windows OS 8.1

  Good evening
  
  I have some problems with my Probook s 4540 in Windows 8 (the problem only occurs in Windows 7) during my sleep, he wakes up with a black-Sault llaptop screen caps lock light work lights are all normal, it's just the screen becomes black.
  I have switchable graphics:
  1 Intel HD Graphics 4000
  2 AMD Radeon HD 7650 M

  I don't know what to say I have a 64 bit OS I downloaded the drivers from the official site of HP and I have also tried donwnloading drivers in official sites AMD and Intel. I don't think that I have problems with graphics.
  And sometimes, when my screen stays off for a long time, it displays a warning in the task bar that the AMD driver is not resonding for more information please feel free to ask.
  
  After reading this, I want to thank you for you time I really appreciate it.
  
  Here is the proof that my drivers are ok:

  

  OK, the sleep problem is fixed now repair it just didn't download the drivers from offical HP Driver download page, update your drivers in Device Manager (restart your pc if you having any difficulties updating).
  
  If you have already downloaded the drivers try to use system restore or install a new copy of windows.

• HP Probook 4530 s Audio problems Windows 8.1 (64-bit)

  Hello

  I'm having a problem with my HP Probook s 4530 where sound sometimes will not play. I downloaded the audio driver for my computer approriate. If I click on an application that requires administrator permissions, and user account control appears, it won't play the sound system as he normally does. If I click on the speaker at the bottom icon right and adjust the volume slider is not a sound. I also noticed that when I listen to any type of Internet video, the video will not play until the sound is working again. The video sometimes plays with no sound, then the sound catches up. I have tried many differnet browsers but the issue keeps happeneing regarless.

  When my computer Windows 7, the audio worked fine. Videos always played and sounds performed system always spot him. My motherboard was replaced late last year due to overheating so I don't think it's a hardware problem. The strange thing is that this problem is not consistent. One minute the sound could be working perfectly, but two minutes later the sound stops just work. If you could provide no details on what it is (my theory is that it is the driver) I would really appreciate it.

  I could try to capture a video of the issue, I'll have and post it on Youtube, but it is difficult, since the issue is sporadic. If I get a video of it, I'll be sure to post the link.

  Thank you!

  Hello @ebaum84,

  To get your question more exposure I suggest you post in the trade forums since the PC portable HP ProBook s 4530 is a commercial product. You can do this at for laptop - HP ProBook, EliteBook ZBook, Compaq, slate/Tablet PC, Armada, LTE.

  The support of your product page can be useful in the meantime:
  HP ProBook 4530 laptop s PC.

  I hope this helps!
  Thanks for posting on the HP Forums.

• HP Probook 470 G1 wireless problem

  Hi, I just bought a HP Probook 470 G1. I installed Windows 7 Professional 64 bit and I cannot get my wireless to work card. The problem appears after an amount all or random that long, it can be 2 minutes or 1 hour 5 minutes. The problem arises when I use wireless networks simply can't access addresses and had to wait about 5 minutes for wifi adapter can connect to available networks, strange thing is I can see the networks but it is unable to communicate with them, even if they are the passwords or whithout a password I received a message windows cannot connect to the wifi network tried to different access points, routers and the same problem, tried to install other OS like windows 8 or 8.1 of windows and the problem persist. 2 of my friends also have this NB and have the same problem.

  I do not understand this problem only with Mediatek (Mediatek MT7630E is installed) adapter wi - fi or other but we all have the same problem and cannot locate the kernel of the problem because it appears randomly every time...

  Product mobile no.: E9Y68EA #ACB.

  Guys,

  Here is the link to the FTP site with the new driver, as you can see that there is now a dedicated Windows 8.1 driver.

  FTP://wln45070:CK * [email protected]

  Solved my problem! A disconnects every 15 minutes. They are now completely gone!

• S HP ProBook 4530 video card problem

  Today, I bought my new laptop - HP ProBook 4530 s with i5 and radeon 6490M. Unfortunately, after I installed windows 7 64 bit on it (as it came with SUSE Linux). Now, I can't do my 6490M work. Only the embedded video works. Can you tell me what I need to download drivers? I tried everything on the ati site, but it tells me that this combination of OS and video card has no driver available.

  At the same time I noticed that many of the same series probook laptops are sold with windows 7, so it seems illogical that there is no driver available. If this is the case that I must return the laptop - I won't need it if there is no way to use discrete graphics under windows.

  Hello:

  You cannot use the drivers from the ATI site for your switchable graphics. They work only for laptops that have only the ATI graphics card and no other additional.

  You can install the graphics driver HP laptop with switchable graphics.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&prodNameId=5060882&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-95167-1

  Paul

• ProBook 470 G2: HP Probook 470 G2 graphic problem

  Hello guys,.

  Two days back I buy new computer notebook probook 470 G2 with R5 M222 RADEON graphics card and I have the problem. I have download the drivers from our HP page for this laptop and do not work. I paste it the screen which is the problem I have.

  Can someone help me this?

  

  I don't know how to fix this and will work my graphics card.

  Thanks for help

  Dejan

  Hello:

  It seems that you need to install the graphics drivers from Intel and AMD.

  First, install the Intel graphics driver and restart.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943843&swItemId=ob_146005_1&swEnvOid=4059#tab1

  Then try the other review of the AMD graphics driver and restart.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_143809_1

• HP Probook 470 G1: update to Windows 10

  Originally, the PC came with Windows 8
  I've updated to 8.1
  And I want to know if there is a problem also update 10

  And I wanted to know about recovery option,
  I discovered after the update 8.1 recovery does not,
  Whether it will be after the update 10?

  So how do you restore the recovery to normal?

  Thank you

  You can use the snap-snap-in management of Windows disk to enable the recovery partition if you want to make an image recovery plant. As long as the recovery partition is still present, the possibility of using it still exists.

  Once you make it active and restart the computer, it should boot straight into the Recovery Manager. Don't do it unless you really need to run a recovery.

  In the Recovery Manager, you can perform the factory image recovery.

  You can use a third-party program to create an image on a support of external storage to use for emergencies in 8.1 for Windows or Windows 10.

  My preference for training ISO image is of software Paeragon disk copy or disk management utilities.

  You can also use clean Windows built in refreshment of imaging utility of creation to create an image in Windows 8, 8.1 or the next Windows 10. Read the tutorial at the following ADDRESS.

  http://www.howtogeek.com/167831/everything-you-need-to-know-about-creating-custom-recovery-images-for-Windows-8/

  WARNING:

  Software Paragon offers me copies NFR (resale) of their software to use and evaluate no cost to me.

• HP Probook s 4320 - wifi problems

  Thanks in advance for reading and pay attention to this frustrating problem I have.

  I use a HP Probook s 4320 and just reinstalled Windows 7, as well as all pilots & assistant wireless etc.

  At home, I have a broadband thanks Talk Talk (UK), through a router D Link N ADSL2 +, who works currently with no problem on a number other devices, laptop (Win Vista) Samsung, PS3, iPhone etc.

  I've used the wifi on the laptop with no problems.

  After reinstalling and coming to set up my wifi network, it recognizes my network and many others around me, I choose mine & try to enter my passowrd - unauthorized, then press the button on the router & go through it - everything seems to work ok.

  After you connect to the internet for about 10 minutes, the connection drops and when I click the icon at the bottom of the taskbar wireless, my network is displayed at the bottom of the list with a red X next to it and I can not connect.

  When I try, it says: -.

  'The settings saved on this computer for the network do not match the requirements of the network.

  When I right click on the wireless icon and select '' problems of disorder shoot, '' he says: -.

  "Check your wireless security type.

  I can connect to the internet without any problem using the wired connection through the router.

  When I go to security settings, they are:-

  -WPA2-Personal security type

  -Type of AES encryption

  Network - correctly-entered security key

  Please could someone help me to be able to use wireless correctly, I would be very grateful!

  Thank you.

  Hello:

  What model of wireless card you have (make and model)?

  There must be a newer there than in 2009 driver.

  It's probably the main issue.

  After you let me know that you install the updated driver, delete the network connection and it restore from scratch.

• ProBook 4430 s Boot problems

  Hello

  I have a HP ProBook s 4430 running Windows 7.

  A couple of weeks, I got a blue screen crashes and it seemed to corrupt a part of windows as windows (among other programs) Explorer wouldn't start automatically. I had to start explorer.exe from the Task Manager after the connection. I have searched the forums and tried all the tips/patches, but to no avail.

  I decided to simply reformat the computer and get back to the basics. This is where things went from bad to worse.

  My HP did not come with a Windows CD or a backup CD, and I have not one when I bought it (I've traveled across India at the time). All forumns advised to use HP Recovery Manager or press F11 at startup to access the partition of the hard drive recovery. (D: in my case). My computer doesn't seem to have the Recovery Manager and F11 does nothing to start. Setup does not change how he arrived at the factory, it should always be there.

  Exacerbated, I changed my D: to 'active' to try to boot from the recovery disk... this stuffed all this. Unfortunately, now my computer does not start (it is said there is no OS on D.)

  Then... of ideas? Is my only hope of order recovery disks from HP? do some work? Is it possible to change my boot from D: drive to C: without Windows help? I can't find options like that in the HP Start menu I can access.

  Any help much appreciated.

  Kind regards

  Samuel

  Hi Samuel,.

  Here's another solution, that you can use to reinstall Windows 7.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( it must be of the same exact version of Windows 7 that originally came with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software you need is found from here.

  Kind regards

  DP - K

• ProBook 450 G1: Probook 450 G1 Networking problems

  I recently installed Windows 7 Home Premium (64-bit) on my G1 450 Probook and have the following problems of driver for networking and USB. Where can I find the drivers to install for thie material suite?

  Thank you

  Hello:

  Here is the link to the page of the W7 driver for your laptop...

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5405166 & swLangOid = 8 & swEnvOid = 4059

  You need the following drivers for devices in the order you posted the...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405166 & swItemId = ob_123192_1 & swEnvOid = 4059

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405166 & swItemId = ob_148180_1 & swEnvOid = 4059

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405166 & swItemId = ob_146774_1 & swEnvOid = 4059

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405166 & swItemId = ob_134503_1 & swEnvOid = 4059

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405166 & swItemId = ob_128883_1 & swEnvOid = 4059

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405166 & swItemId = ob_127112_1 & swEnvOid = 4059

  In addition, you will need this bluetooth driver...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405166 & swItemId = ob_126765_1 & swEnvOid = 4059

• ProBook 4530 s: driver for Probook s 4530 after updating windows 10

  Hi all

  I've updated my Probook s 4530 on Windows 10 days back & now three drivers are missing. I tried to auto update in windows update, but it could not find. I know that it is too early to ask for help on the driver for Windows 10 but eager to get a work around.

  Here are details:-

  Pilot 1: Device Base system:-PCI Slot 2 (bus 36 PCI, device 0, function 3)

  Information:-device PCI\VEN_197B & DEV_2393 & SUBSYS_167C103C & REV_30\4 & 2ce17296 & 0 & 03E2 also requires installation.

  Pilot 2: Device Base system:-PCI Slot 2 (bus 36 PCI, device 0, function 3)

  Information:-device PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C & REV_30\4 & 2ce17296 & 0 & 00E2 also requires installation.

  Driver 3:-unknown device:-location on the Pci Bus

  Information:-ACPI\HPQ0004\3 & 33FD14CA & 0

  Thanks in advance.

  Concerning

  Dev

  Hi, Dev:

  Here is the workaround...

  For the first two, use this driver...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060881 & swItemId = ob_116003_1 & swEnvOid = 4132 #tab1

  For the last one, use this driver...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060881 & swItemId = ob_125640_1 & swEnvOid = 4059 #tab1

• ProBook 4520 s: lack of features on a ProBook 4520 s after upgrade Windows 10

  Hello dear community

  Long story short: I have a HP ProBook 4520 s and yesterday I upgraded manually (with the tool provided by MS) Windows 7 Pro to Windows 10 Pro. Everything went very well and smooth and it works perfectly well until now.

  The problem is that some of the features of the laptop no longer work. Here are some examples:

  -Highlight the option on touchpad

  -built-in camera

  -Some FN buttons like the one for the brightness of the screen while others (for example, the volume and email) working

  My reasoning is that it lacks certain drivers or these functions are somehwat is not compatible with the new OS (it's a 5 + year old PC after all), but I could be wrong. I'd like to hear some suggestions and opinions on this.

  If someone needs to my specifications complete, there are:

  Operating system: Windows Pro 64-bit 10
  CPU: Intel Core i3 330M @ 2.13 GHz 61 ° C Arrandale 32nm technology
  RAM: 4.00 GB Dual - Channel DDR3 @ 532 MHz (7-7-7-20)
  Motherboard: Hewlett-Packard 1411 (CPU 1)
  Graphics card: monitor generic PnP (1366x768@60Hz)
  512MB ATI Mobility Radeon HD 4500 Series (HP)
  Storage: 1043GB Western Digital WDC WD1001X06X-00SJVT0 (SSD) 42 ° C Black2
  Optical drives: DTSOFT device CdRom virtual hp DVDRAM GT30L
  Audio: AMD High Definition Audio Device

  Thank you for reading. All the tips and comments are appreciated.

  Cap.

  Hello

• HP Probook HOV84EA #ABU: 1511.10586 windows upgrade

  Hello

  Windows wants to install the 1511.10586 upgrade, but said that HP CUSTOMER SECURITY MANAGER is incompatible and wants to uninstall.  Is it safe to allow?

  HP Probook 455 G 1 2CE322BDL series product HOV84EA #ABU

  iI would appreciate your opinion

  Neville cordially

  Yes, it is safe to uninstall the HP Security Manager Client software.

  It is not necessary to have installed and the operating system Windows 10 will do fine without it.

  The purpose of the HP Client Security software is as follows:

  "HP Client Security Manager provides Windows user name and the Web site single-sign - we enhanced capabilities." Security Manager is also the host of plug-ins HP Client Security and must be installed before other modules of Client Security. This package is provided for the laptop models running a supported operating system. »

• HP Probook 6570b: unusual startup problem

  When my WD Mybook 1130 is connected to a USB 3.0 port, my Probook will not start.  Here is the exact sequence where this happens:

  I do turn my notebook and plug the WD drive.

  The drive is recognized, installed and is fully functional.

  I put my laptop in mode 'sleep' (or I stopped it)

  When I press the power button on the laptop, the splash screen appears, with "Press esc for boot options", and it stays there, non-functional.   It does not start or respond to keystrokes - except the power button, which he died.

  If I unplug the WD drive, then press the power button, the laptop starts normally.

  So, what is a problem of HP, a problem of USB 3.0 or a WD Mybook drive problem?

  I understand - and I have the same situation.  If I connect my external WD passport, the laptop does not start.  But if I connect other readers, it will be.

  There is a conflict between the WD drives that prevents laptops to boot.

  Sorry, but I have been unable to find a "solution" for this.

  Good luck
  
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.
  Please click on the symbol of the thumbs-up to the left of the answer key to say thanks fopr my help.
  ========================================================================

• 4540 proBook s (H6D81ES #ABF): problem of fingerprints

  4540 proBook s (H6D81ES #ABF) 10 64-bit Windows

  Hello, first of all I want to know whether or not that thing in the picture is the fingerprint. If yes why I see something biometric on Device Manager or the BIOS even after I installed the validity sensor driver and chipset one.

  Also I don't have Windows Hello after setting the PIN too.

  

  @Wajdikh

  Wajdikh wrote:
  

  4540 proBook s (H6D81ES #ABF) 10 64-bit Windows

  Hello, first of all I want to know whether or not that thing in the picture is the fingerprint. If yes why I see something biometric on Device Manager or the BIOS even after I installed the validity sensor driver and chipset one.

  Also I don't have Windows Hello after setting the PIN too.

  

  4540 s laptop HP ProBook

  The fingerprint reader is an optional component of your laptop.

  The image you posted shows the Notepad in the image doesn't have a fingerprint reader; small empty coverage shows where the player would be installed.

  Identify components

  Specifications

  How to add a PIN to your account in Windows 10

  Assign a PIN to use with Windows 10 login is no by-itself provide Windows Hello facial or fingerprint login - Windows Hello requires a device to use: 'properly' (high quality) camera, fingerprint reader

  Learn more about Windows Hello and put in place

  What is Windows Hello?

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.