HP Probook 470 G2: Recovery 8.1 of Windows on a new drive
I have a HP Probook 470 G2. The original disk is fine, but I want to migrate to an SSD. I did a restore USB and replaced with a 120 GB SSD HD. It is much less than the size of the windows on the original disk partition so I don't see a problem with that.
Having exchanged the disks and booted from the USB, I chose "reset windows" and everything seems to go well until 74% when I'm "there was a problem of resetting your PC", with an option to restart.
I found a thread here where there are similar symptoms, but because I am using a new drive I don't think I can replace the drive in the middle of the recovery.
I saw some videos on YouTube that show a HP Recovery Manager in Windows itself (which I don't have) or in the screens according to press F11, and I don't understand that either.
I have to correct, then restart. Choice of troubleshooting, I get Refresh (does not work, because the disc is empty), refresh (arrives at 74% as I said) and advanced. Advanced led system, System Image recovery restore settings, Start Up repair, prompt command or UEFI firmware.
As I have said that there is no HP recovery in Windows itself, I used a Windows procedure, but he said the HP Recovery disc in the middle of the construction so I assumed that he had built himself ok. It's driving me crazy now, should not it lasts migrate to a better record, but I have not found a conclusive answer via Google or HP pages where my post here.
Any ideas? My position of strength, it's that I still have the HARD intact original disc so I did not burn bridges.
OK, so you pouvez use a recovery USB disk to install on a smaller disk. It's just that something was wrong with my recovery USB drive. I have a friend (with the same laptop) to create a recovery on his drive and it worked.
Tags: Notebooks
Similar Questions
-
My computer came with Windows 7. Recently, my hard drive failed. I have four recovery disks that after I bought my computer, I did. These disks can be used to install Windows on the new drive?
YES!
I just did mine 01/01/2016, installed a new WD 500 GB HDD black on my laptop ASUS K52F, took my DVD 4 restore disks and restored to Win 7 Home Premium, more 10 Windows, which is sitting on my old HDD in the trash. I'll stick with my Original OEM OS and never improve to WIN 10 times.
NOTE: The only time the restore disks do not work is when you replace your motherboard.
-
HP Probook 470 G1 recovery disc creation
The company bought laptop Hp Probook 470 G1 E9Y79EA. We would like to do the recovery disks, but Recovery Manager is missing. Can someone help me?
GORDIUS
Hello:
You can order HP recovery media by contacting HP for the country that you live in the link below.
Call the phone number for business PC or use the chat feature.
http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html
If you are located in the USA/Canada, call this number... 1-800-334-5144.
In the United States, if the PC is under warranty the recovery discs are normally sent free.
You will need to provide the serial number of each PC you want a set of disks for.
-
ProBook 470: ProBook 470 poor WiFi after upgrade to Windows 10
Hi all
There are so many issues report on WiFi on Windows 10 problems, but I'm not really mine.
I'm running the ProBook HP 470 with WiFi Atheros 9000 series card. It worked fine with Windows 7 Professional 64 bit.
A couple of weeks, I decided to upgrade to Windows 10. Everything works fine, except the WiFi. I can connect to the WLAN and network speed and the signal strength is perfect, but after a while (minutes or even hours), he falls abruptly to the bottom and my router WLAN even States disconnected, but he'll fix itself after a while. I can force the "self-repair-speed" of disabling and enabling WiFi again.
But, this is no good solution, WiFi has to work reliable all the time when not moving and it work perfectly with Windows 7. I was hoping that Microsoft and hardware vendors manage drivers after one year of version 10 of Windows, but seems not to be the case.
I have already installed the latest driver for HP download site, but it is already a year old, and it was the same thing as Windows / Microsoft has done while Windows Upgrade. Therefore no change to be expected.
Before that I go down again to Windows 7, what can I do? There are a few other pilots who could interfere with WLAN and might not be updated? (More of the WLAN driver I don't have other day manually because I count for the Windows upgrade process.)
Volker
The laptop is to date, according to the release of Windows 10.
Anyway, it doesn't work well, that's why I decided to downgrade to Windows 7. Now it works again as it is supposed to.
-
Hard drive with recovery partition failed, how do I restore Windows on the new drive?
How can I get my sons pc working again?
Hard drive failed and restore vista on a partition on the disk. No backups. Replaced the hard drive but obviously not Vista. I have the genuine key. Can I download the trial or something then activate with the existing key?
Contact the manufacturer. They should provide you with recovery disks.
-
HPm9400z crashed and I thought that it is a good time to put in a bigger hard drive. Installed a 1000 g and 300g original discs. I used the recovery disks that I sent there for (recovery hard disk does not work) to start a new one. Install windows on the new drive of 1000g. Recovery went well, windows vista, it works... BUT hard drives now only shows 50g and 15g each. How can I fix it? I tried to make a bootable DVD to reformat the drive HARD 2 (old school?) but could not figure out how to do this in Vista. Any suggestions? Or should I just get a Mac?
Go to administrative tools-> computer management, and then select on the left disk management. Fully develop the window. You can try the right mouse click on your C drive and you should see a selection of Extend. You could also a space not formatted in the main window.
-
HP Probook 470: How to remove the fingerprint reader
How can I completely remove the software from the fingerprint of my Probook 470 scanner? It always requires 10 to 20 shots before he let me. It is a good idea in theory but boring in practice.
I could exit the fingerprint enabled option and just ignore it - but unfortunately it is bloatware. Whenever I go to the connection, it keeps the box frozen for several seconds, and then it will allow me to start typing my password.
I would go back to this nice simple Windows 7 connection that the HP software has hijacked unfortunaetly.
Sucess. I have it solved, but it is quite difficult.
First of all, I have tried to uninstall HP customer Security Manager but got the following error:
error 1325.hewlett - packard is not a valid short file name.
To work around this, I went into control panel / Device Manager and disabled the driver CD-ROM/DVD-ROM (no! I don't know why).
Then, I tried once more to uninstall HP Client Manager Security. This time he says that I need to first uninstall the following:
-HP Device Access Manager
-HP File Sanitizer
-Recovery of stolen computers HP
-HP Drive EncryptionThen I uninstalled the four of them in turn, rebooted and then uninstalled the HP customer Security Manager - which this time did actually uninstall.
The result has been successful. When I start my PC now, I can type my password instead of having to wait a few seconds while the HP bloatware gets himself sorted immediately.
Oh, and I also re-enabled my CD-ROM/DVD-Rom driver.
Weird.
-
HP Probook 470 go cancel the loading image and then start boots motorcycle option
My HP Probook 470 GO
Suddenly I appeared cancel loading image and then start option boots on the output screen and can not do anything further to will not windwos raise.
When the father of the F7 to do an iybaci my spare key hp not registered recovery recovery
Hi @mdcom,
Once access you the link provided discussion forums should be the category where you can ask your question.
Kind regards
George -
HP 470 g3: Wich M.2 probook 470 g3 SSD
I would like to know which M.2 SSd is suitable for Probook 470 G3?
Connector of 2280 B & M from edge of key or something else?
M.2 2280 SSD (NGFF), SATA-3
Supports the following readers:
- 256GO TLC
- 128 GB TLC
Defined as peripheral if on primary storage.
SSD drive, m2
256 GB, TLC
827583 001
128 GB, TLC
827053 001
Ordering parts certified HP with HP PartSurfer
http://support.HP.com/us-en/document/c00372736
Maintenance and Service Guide
http://support.HP.com/us-en/product/HP-ProBook-470-G3-notebook-PC/7834620/manuals
HP ProBook 470 G3 Notebook PC - videos to remove/replace
REO
-
HP ProBook 470 G2: My laptop is plugged in, but it does not load
I bought a new laptop 8 days ago (HP ProBook 470 G2), and I have a problem. When I plugged the adapter in, my laptop show me this message: "plugged in, not charging. Please send me the answer to the solution of the problem. I thank in advance.
Hello Lala33:
Welcome to HP forum. Why even bother messing around with it. Just go back to the store and Exchange. Leave the store address Dirrect HP support. Most of the stores have a 30 day return policy. You aren't the only one with this kind of problem with the defective battery on a new computer. If you deal with Direect Support HP to fix it your self you'll be with a computer for at least six weeks. Your computer comes with a one year warranty, so HP Dirrect support are those to contact about a battery replacement or fix the problem with the hardware inside the computer. Why do business with mares of night to support Direct from HP when you don't need to. Just return it even if you are also just rent Exchange it.
In addition this does ' t HP not even cover the steps of troubleshooting your system for your laptop battery. I just checked in case you wanted really badly to turn your self. How lame is that.
Start page for your computer:
http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/performMaintResults/?sp4ts.Oid=6943842
I don't see anything that covers the battery for troubleshooting. Just so return it and exchange it. Less you have a new computer, when you do the same day against waiting for six weeks with a minium. Not to mention that I am fully aware of how the poor live from HP support is. It cost me $1,1000.00 to fix their screwed up they are gone when my Computer has been returned by them for the sixth straight time. That's how badly they have screwed up my computer.
You're welcome frrw. Look at this way less it didn't ignite as my HP DV7t-7000cto is a replacement computer because they couldn't fix my HP DV7 3565dx computer. If it is out of the box pluged in and turned on. That's all she wrote. Pouf!
-
HP ProBook 470 G3: HP ProBook 470 G3 HDD Support
Hello people,
I bought a HP ProBook 470 G3 and I'm trying to insert a second hard drive in the laptop. The first disc is a SSD M2. I discovered that there is no support inside the laptop, so I can't provide hard drive.
I found the material to drive HARD HP 828147-001 Kit, but then I have two different media. One with three screws and the other with four screws. I need one with the four screws.
I hope one of you can help me to find the good one which gets back in my book.
BrokenWing
PS: I'm located in the Netherlands.
Dear customer,
You have found the number on the right side for the HARD drive carrier. 828147-001
You can use this and it is compatible.
For more information, send you the complete guide. Please see the link below.
http://CDN.cnetcontent.com/F0/F9/f0f98127-BEAA-45B0-BB5B-58a10d8ef9a5.PDF
Hope this helps, for other queries in response to the post and feel free to join us again
* Click on the white button on the right to say thank you Thumbs Up *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
Thank you
GBL84
I'm not an employee of HP
-
ProBook 470 G0 network controller drivers
Hello. I have trouble with the drivers for the network for ProBook 470 controller.
After the installation of new windows no driver does not match this device.
Help, please.
Hello:
Here is the link for the driver you need.
I gave you one of a consumer notebook because business PCs site is down and has been walking all weekend.
They must have some problems there.
-
ProBook 470 G3: M2 500 GB (SATA) drives are supported on HP ProBook 470 G3?
Officially, only 128 GB or 256 m2 TLC (SATA, PCIe) readers are supported on HP ProBook 470 G3. However, Crucial says their M.2 MX200 500 GB TLC works fine on the same laptop. Would Samsung 850 EVO 500 GB m2 also work? It is also based at TLC.
HP ProBook 470 G3 Notebook PC - videos to remove/replace
Click the M.2 SSD Mini-Card video and watch what the size of the m2, they go out and replacement.
REO
-
ProBook 470 company G1 64-bit drivers
Hello
I am currently undertaking a task of building of a HP ProBook 470 G1 on Ent of Windows 7 64 bit...
I'm having problems with the drivers for it (as expected), I wonder if anyone can help with the driver either exact or compatible for:
Hardware ID;
\VID_0E8D&PID_763E&REV_0100&MI_00 USB - shows just as BT in device management
PCI\VEN_8086 & DEV_8C3A & SUBSYS_1940103C & REV_04 - PCI Simple communications controller
PCI\VEN_8086 & DEV_8C31 & SUBSYS_1940103C & REV_04 - USB controller (USB 3.0 I think)
ACPI\HPQ6007 - unknown device
Thanks in advance for any info/help people can offer
Pete
Hi, Pete:
Here are links to the drivers you need:
PCI\VEN_8086 & DEV_8C3A
PCI\VEN_8086 & DEV_8C31:
ACPI\HPQ6007:
\VID_0E8D&PID_763E USB:
-
ProBook 470 with 2 unknown devices
I have a HP Probook 470 G2 with W8.1 pro installed.
However, I still have 2 unknown devices, including pilots can't be found.
Below 2 details of the devices.
1 ACPI\HPQ6007\3 & 33FD14CA & 0
2 ACPI\INT33A0\0
HP Netherlands could not provide me with the correct drivers.
Hello:
You need these drivers for devices...
https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23109&lang=eng&ProdId=3470
Maybe you are looking for
-
Printer Spooler says that my printer is in error. How will I know what is the error, so that I can fix it? Printer does not print. I'm lost. Windows could be 64-bit. I do not know.
-
Impossible to uninstall ThinkVantage System Update
Hi I recently installed the latest version of the ThinkVantage System Update on my ThinkPad T61p and for some reason, the program does not work. It does not start, and when I try to uninstall, it does not uninstall either. When I start the program, i
-
I have a genunie product key but it does not work. How to solve the problem?
I bought a PC refurbished which came with license Windows XP Pro renovated the Micro Center near my house. My son got the infected PC and so I decided to reinstall the operating system. I used the product key on the label of license on the PC, but it
-
Why my computer date and time keep changing to 01/01/2003
I change the date and time of my lap top, according to the laptop for a while and turn on the date and time continue to change to 01/01/2003. I have not so much time to change, but... his problem keeps up to date of the.
-
I bought Windows 7, a number of months. I crushed my computer and had to have iYogi help me get back up and running. I wasn't able to get a restore point. We called Dell and they said they would send me a CD for Windows 7. After have been conducted o