HP proliant ML 310 problem with raid

Similar Questions

• Problem with RAID array after replacing defective RAID controller - Volume is currently in INACTIVE/GRADIENT condition

  We have a Dell PowerEdge 840, who had the RAID controller out yesterday - the system has come from a "ERROR!" Faulty card message.

  We replaced the controller with one we had shipped from one day to the next. System has been turned off, we made sure the installed updated Earth, etc etc. As soon as the system voltage, the following message came on the screen:

  ===============================

  Exception of RAID integrated detected:

  Volume (00:130) is currently in INACTIVE/GRADIENT condition

  Enter the SAS Configuration utility to study!

  ABILITY TO REVIEW OF HBA ID LUN SUPPLIER PRODUCTS

  0 free SAS1067-IR 0.10.49.00 NV 25:0 D

  Dell Inc. MPT ROM boot, no device supported found!

  ...

  No available boot device.

  ===============================

  What should I do to rebuild the table and see the data? Apparently, the server crashed some time after the office closed last Friday, but before that backups ran, so that we have not backed up the data on Friday.

  Thank you

  Baskervi,

  Start the BIOS of the controller (CTRL-C)

  Select the controller

  This will bring you to the adapter properties window.

  Use the arrow keys to highlight and select Properties RAID, press on enter.

  This brings you to the window again select array Type, there is now an option to view existing matrix. Using the arrow keys, select view existing array,

  Select the Inactive matrix. Select manage the Array.

  The only options available is to activate the table or delete the table. In order to get this controller to accept the disk configuration, select Activate array by using the arrow keys to highlight, and then press ENTER.

  Confirm Activation.

  Return to the main menu and select SAS topology and check that the two tables are active.

  Let me know how it goes.

• Angelica 2) M3970AM card mother support for ssd seems to have problems with RAID VS achi

  It appears in the bios my hitachi hard drice is set to Raid. When you add an ssd as another hard disk, the bios recognizes it but windows 8.1 does not work. Changing hard drive in AHCI or ide causes the pc does not start. How can I get win 8.1 to recognize the ssd?

  I was able to find a solution. I'll share.
  Boot in the bios, change sata raid mode to ACHI. Save and exit.
  Immediately start in safe mode.
  This will allow drivers to update. Restart the computer.
  Windows 8 coming in now. Manager displays disk SSD.

• Problem with RAID on Dell 720

  So, I try to install ESXi 5.1 on my dell 720.  I use the dell drive.

  My question is he won't see the RAID array and ignore the virtual disk (raid 5 on 4 1 TB disks) but will be able to see the individual drives.

  If I go ahead and install it in one of these drives, it will degrade the raid array, use a drive and ignore the rest.

  I made sure that the array has been initialized and ready to go.

  Anyone have an idea on this one?

  It is a PERC S110 onboard

  Thank you

  Welcome to the community,

  Unfortunately ESXi does not support software RAID controllers, but only real hardware RAID controllers. (see http://www.vmware.com/go/hcl)

  André

• Problem with XServe and XServe RAID via Fibre Channel

  Hello everyone,

  I have a problem with my blended Xserve RAID.

  I see in RAID-Admin and configure it successfully (via Ethernet). Connect with our Xserve via Fibre Channel, but the XServe and XServe RAID do not detect each other.

  The fiber on the Xserve channel LEDs are white on the Xserve RAID completely off and permanent.

  RAID-Admin status of Fibre Channel: 'No connection (1 table)' with a red square.

  If I try to open the utility of fiber channel I get the message: "card Fibre Channel is not found." Utility disk OS X can't, too.

  I changed the card connector cable, and made several reboots. But each time the same thing: they do not detect each other.

  Xserve (2009):

  -2.26 GHz Quad-Core Intel Xeon 5500

  -Map of Apple dual-channel 4 Gb Fibre Channel (LSI7204EP)

  XServe RAID:

  -RAID 5 in an array (only on the left with 5 x 500 GB)

  -1.5.1 Firmware

  -Cable Apple 4 Gb SFP - SFP

  Thanks for your help and sorry for my bad English!

  Hi Mpm-Mainz,

  Check if you have enabled LUN masking. To be able to see, you will need to download raid admin 1.5 not the 1.5.1

  Xserve RAID Admin Tools 1.5

  Have you also tried to use the other controller? Even if there is no disc in there, then it should appear in the preferences of fiber card system.

  Thank you
  Owen

• RAID 5 problem with R410 Perc 6 / i controller

  I have a Setup RAID 5 on a Dell PowerEdge R410 (4-300 GB Hard Drives).  I'm moving hard disk of 300 GB to 600 GB hard drives, so I can increase the available storage.  I replaced the drive in the Groove #2 with a 600 GB drive first, because he was already in a failed State.  After the reconstruction, I waited til the next day for the replacement of the other drives 600 GB drives.  When I replaced the drive at location 0 #, the drive into the #2 Groove entered the predicted state failure during rebuild.  So, after the reconstruction, I replaced the drive in the #2 Groove a 2nd time with another 600 GB hard drive.  During this rebuild, the reader Slot #0 also entered a predicted failure State.  So I let the server run for a few days.  And now the two Slot #0 and #2 (the ones with the new 600GO drives) are in a State of predicted failure.  I can't believe that I would have 3 bad drives in a row.  I use all Dell certified readers.  Can advise you, what do I do then?  Update the firmware? Going back to the old drive?  It is a critical production server, so I need to minimize all the time as much as possible.

  Thanks in advance,

  Byron

  Hello

  A predictive failure is reported on a drive when there is excessive bad blocks on the disk. Since you have rebuilt the drive in the existing table, most likely other readers had bad blocks that were copied to the new drive. What operating system do you use? There is not a way to get readers off predictive failure, once they are reported. There is potentially a much larger problem with the table. I recommend you make a backup of all data files.

  http://www.Dell.com/support/article/us/en/04/438291/en

• Problem with optical drive SATA with ESX 3.5 on HP Proliant ML 350

  Recently installed ESX 3.5 on 60 day trial on the new server, HP Proliant ML350 G5, found that what connection by customer VMWare Inf as not able to see the host Sata optical drive, ditto even VMS applies when creating new virtual machines, must use emulated local laptop computer client IDE drive to see the ISO image.

  Connected call with HP and they came with http://tinyrul.com/qpzrb5 article which indicates the known problem though on DL385 - "HP works with VMware to correct the incompatibility with the SATA device driver that is causing the problem with the optical CD/DVD drive.

  Another link on the same issue http://www.vmware.com/support/vi3/doc/drivercd/esx350-ahci-350.1.2-146051.html

  I asked HP if possible buy an IDE DVD player but my image processor designed to work only with this model.  Then appears stuffed that not a not support contract with VMWare to connect problem I'm have sent customer service online application to see if they can help you

  popular ideas

  Regarding the browser data store.  Toggle the display of data warehouses in the vi client.  Or press ctrl-shift-d.  Here, right-click on your data store, and then select Browse datastore.  When that opens, add at the top of your taskbar, next to the folder icon, is a download icon, a disc with an arrow.  This will allow you to download files to your data store.  Navigate to a folder in your data store and download the ISO to.

  It is a roundabout process, but will work if other methods fail.  With the ILO.  You can map your local cd through the ILO on a drive on the local ESX host.  This will make your local client drive, walk of the esx.  With one side mounted ESX host, in the settings of your virtual machine, you can edit the cd and this time, instead of customer, you can select the host device.

  -KjB

  VMware vExpert

• Problems with Adaptec RAID followed after update02 arcconf

  Hello NG,.

  We have problems with a 5.1 ESXi host.

  It worked fine with 5.1_update01.

  After that we did a upgrade to Adaptec arrconf tool 5.1_update02 gives us an error message saying:

  Inspectors found: 0

  Invalid controller number.

  We suspect that the driver Adaptec SCSI (vmware-esxi-drivers-scsi-aacraid-510.5.2.1.29900.-1.1.5.799733.x86_64.vib) has been replaced by the hotfix.

  Any who have had a similar problem?

  What can we do? How to find the old driver?

  Kind regards...

  Hello

  to install VIB/driver to take effect, you must restart you host. If something goes wrong don't worry, you can use alt-bootbank to restore any changes made by the installer.

  To use successfully restore to the previous picture SHIFT + R during the process of start-up of ESXi.

  _________________________________________________________________________________________

  If you have found this device or any other answer useful, please consider to award points. (use the Correct or useful)

  Kind regards

  P.

• Problem with ESXi5 - system freez

  Hello

  I have a problem with my server ESXI5.

  The system is a HP ProLiant ML115 G1 server. PowerEdge is a bit Adaptec ASR 6805E 4 x 500 GB 24/7 SATA Raid 10 and 2 x 500 GB Raid 1. After some time, stop the server. All the VM can be reached.

  This text written by journal:

  SCSILinuxAbortCommands:1798: failure, Driver aacraid, vmhd1

  I don't know how I can solve this problem.

  Greetings nero

  Hi and welcome to communities,

  Have you tried the http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2011436 patch

  Looks like a perfect adjustment of the question, you are facing

• Install windows on mac pro (early 2008) in other SSDS with RAID card

  Guys, good evening to all the same time.

  I get out of this crazy short, I ask humbly help.

  I explain my problem:

  I have a Mac Pro (early 2008), with RAID CARD MEDIA

  He does not then I "gave" to my mother who must use windows for work.

  I'm out all 4 disks in RAID installed and mounted 2 - SSD OCZ Agility 256 GB.

  one of them is installed OSX Yosemite. on the other hand, I want to install WINDOWS.

  and here the problems begin:

  When I insert the win8.1 to proceed installation standard dvd (EFI not talked since the beginning of 2008), I get, when I have to decide on which disk to install and format windows, does not reveal the installed drives

  After 2 days of tweaking, I was able to understand that this is a problem due to the RAID card installed, I also read that you just remove it and connect the SSD in one of the two doors empty ODDsata (and not in the 4 planned the raid card slots)

  but still does not see the attached HDD / SSD, so keep trying and I think it's a driver problem and I need to install the AHCI driver, now, I'm pretty Nerd, but I still can't get.

  Someone could want explain step by step what I need to do to install this * win on MacPro 8.1 designed for RAID card?

  Thank you so much in advance.

  A welcome message

  Ruggero

  If you remove the card RAID Apple on the Mac, you MUST connect the iPass cable on its location on the motherboard, or all four bays are unusable:

  

  .

• Problem with Windows Media Player Audio sync DivX playback in full screen

  Hello

  I have found lately that when playing videos on Windows Media Player divx mode full screen audio is out of sync.  If the video is played in window mode, there is no problem.  I had no such problem in the past, but now for about 1 month or so, I have this problem.

  I have fitted iq508a to vista 64-bit, with the latest drivers delivered HP installed (using the HP update utility)-does anyone else have this same problem too?

  Thanks in advance

  Jim

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  I can't believe! I solved the problem with this problem of video audio sync during playback in full screen!

  While watching the Pineapple Express, I thought WTF I'll take another closer look at this, and while they were smashimg their cell phones so that they could not be found by triangulation, (don't ask - u just I have to watch - stoner movie )...

  in any case, I looked under tools options in WMP.  I unchecked the option on the performance tab "use video smoothing"-the video as reloaded and bingo! everything in harmony!

  BTW, I checked my another PC running Vista 32 bit and the option ' use video smoothing ' also exists and it is checked if this seems to be a problem with WMP works on Vista 64 bit or running desktop Touchsmart of WMP... In case I am much happier now...

• Problems with the installation of recovery - Satellite A300D - BSOD

  Hello

  The laptop in question (TOSHIBA Satellite A300D) recently stopped starting (BSoD).

  So, I tried using the recovery disk, but there is no help. What happens is:
  -After about 10 minutes of waiting, the first language menu load, so I click on "next".
  - Then I again click Next and accept the message that my HARD drive will be erased
  - Then I see a cmd prompt that says "try to remove all the letters of partitions possible...". »
  -There is also a minimized command prompt that says something like "RAID failed to initialize."
  -And then nothing happens.

  Is this a hardware problem? I also tried a full installation (instead of recovery), which, even once, is simply not. None of the errors is - it just freezes.

  Any help appreciated.
  Thank you.

  It is not easy to tell what can be the problem, but if you were not able to install the OS by using two different facilities CDs/DVDs, so there must be a problem with the HARD drive.

  The warranty is still valid?
  I mean you can contact the nearest Toshiba authorized service provider and explain the situation. They can swap the HDD and again test the recovery procedure.
  Can you get somewhere 2,5 SATA HDD for testing?

• Problem with safari loading

  Hello. I was searching on the web and I don't know how, but I could not load other pages.

  The problem is: my site camputer will complete but after that show noting loading. Only a blank page.

  so I opened firefox on mac, but still noting rest then my camputer but has changed and after that I stopped and reset and then reset smc, finally, I ran disk utility and no thing changed.

  I have to say two things:

  some sites like google or wiki will open but page even apple is not.

  I can't open all the pages with windows and iphone so no problem with the network.

  Thank you for helping me

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Problems with the 64-bit on Pavilion a6620f Vista Factory restore

  I had a hard drive failure and restoration on a new hard drive. The original HD is a 500 GB Seagate Barracuda 7200.11 model ST 3500620AS. The new HD is a 500 GB Seagate Barracuda 7200 model ST 3500641AS - RK. I bought a set of restore for this HP computer disks.

  First problem was that disk 1 does not start from the internal CD/DVD drive. My Seagate drive boots fine on the same drive! I used an external USB CD/DVD drive and restore disks worked well on that. I went through the process of factory restore and in the end, I get an error message "installing Windows could not configure Windows to run on this computer hardware." I tried to change the BIOS setting from ACHI and IDE to SATA RAID with no luck. I tried to unplug the USB CD drive before the first reboot. That no longer works.  I unplugged the internal CD drive and tried different combinations with no luck. Need help I have run out of things to try! Does anyone have any ideas/thoughts?

  Hello:

  I don't know how you can get your recovery discs to work.

  Looks like you have tried everything.

  I had problems with mine too and got the same error on a HP Elite 8200 desktop computer business

  It was the first time I've ever had a problem with recovery disks.  It's very frustrating.

  I have a workaround if all goes well, you can use to get Vista on your PC...

  If you can read your 25-character product key MS, you can make your own Windows Vista installation disc. You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them (just before going forward with the actual facility) and they seem to work perfectly.

  Apparently, when you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-VI...

  After you have successfully installed vista, you can download the drivers you need your PC support and driver page.

  Paul

• Problems with ImageAssist on the machines using SSDS m2 (NOT is)

  Hello guys,.

  first of all, I must admit, I am facing ImageAssist the first time, so maybe I m ask stupid or boring. I tried the search within this Forum, but didn t get results...

  Okay, so here´s I want to do... our new generation of material (E7270, E5570, OptiPlex7040 far, precision 7710) must be distributed to our subsidiaries around the world. Sometimes they must implement a customer, so I want to create a Sysprep Image BASE + APPS, which I can send to these guys here.

  Here´s so what I've done (problem follows when restoring my Image)

  for example allows to take the E5570, 8 GB of RAM, 256 SED m.2SSD. I installed Win7x64 Enterprise with a Microsoft ISO in a virtual machine using VMWare Workstation 11. My VM config: 4 GB of RAM, 60 GB HD, network in bridged Mode, turn off sound and VM printer and here my first question:

  Inside VM:BIOS or EFI Mode and drive hard ACHI or SATA Raid or SCSI mode? OK, I m prepared and tried all the...

  so after installing win7 and .net 4.5.2 (VMWare Tools also, for the use of slides &) and 2 Reg settings with regard to our environment (MaxTokenSize = 65535 and EnableLUA = 0) I created my BASE Image/Snapshot.

  After you add a few packages of software, I created my BASE + APPS (always with VMWare Tools).

  Next step, uninstall VMWare Tools... restart, after this judgment. now boot into DELL's PE and I created our MaintenanceImage to a network drive. So far all is working well, so I used the installation without assistance-creator tool and define our values (name & Company, selectable language, workgroup, computer name must be completed by the regional IT guy, and I checked to copy the profile to the default user profile... that s he)

  Validation tool crossed without moaning, capturing also...

  I sliced two of the Image (about 10 GB) to some 2 GB and copied on our USB key for testing purposes...

  Stick plugged USBPort E5570, restored, added DELL drivers CAB files and after restoration, the E5570 started Win7x64 for the first time... everything worked fine, etcpp... devices to about 90 percent of the first boot, I get the message: "Windows cannot configure one or more system components. TI install Windows, reboot, and re-install Windows.

  Hope someone could snap this suspicion to my face :D

  I also tried a BIOS/MBR Installation with the 7710 of precision using a standard 2.5 "SSD... I didn t get an error or a problem with this one... restroing & syspreping went well

  Waiting for lots of helpful tips to fix this :)))

  Best wishes & greetings from Germany

  CHRIS

  Hello Tyler,

  Problem solved, everything works like a charm...

  Thx for your help...

  Got the wrong information of the German support. I tried some things over the weekend, and now it works.

  Kind regards...