Problem with ESXi5 - system freez

Similar Questions

• Satellite C40D-C - problems with the system

  I recently bought an a toshiba satellite C40D-C Series notebook PC as my old satellite - essentially - is dying. After you connect to the internet, I tried to download AVG Antivirus on my computer that I don't have - and never - trust McAfee anti-virus that comes with the computer. Every time downloaded AVG then restart my computer, the computer goes directly into the automatic repair system and doesn't let me do anything but to reset or restore. This has happened even with completely removed McAfee. I've been on AVG directly today (January 15), and they have to do remote set-up for me - with the same results. Yes, I'm aware that McAfee is a selfish cry of a system and refuses to acknowledge any other antivirus, but that this issue happens even with completely removed McAfee shows clearly that it is something that Toshiba has worked in the system. I can't even disable the automatic repair tool. I have to be stuck with a McAfee antivirus which, moreover, does not yet or is Toshiba will make an effort to help solve a problem they caused?

  Why this computer isn't allowing AVG Antivirus work? And why, after each attempt to download AVG, the computer goes to auto repair whenever I shut down or restart? Is this a problem with the system or something, Toshiba has done on purpose?

• OfficeJet pro 8620: officejet pro 8620, error: problem with ink system

  During the initialization of the printer, after that I inserted the ink cartridges, I get the error: "X-problem with ink system... I followed the directions: "lift the latch on the print carriage, reinstall the print head and then remove the cartridges and inspect leaks." Do not use cartridges that leaks. If the cartridges are OK, re - install. After you have reinstalled, turn the printer off and then back on. »

  Well it don't turn off the printer... I get another message: "the printer initialization and the ongoing calibration.» Do not put off the printer or turn off the power during this process. »

  I repeated this process on 6 or 7 times with the same result.

  I use "cartridges Setup" he claims.

  Help, please!

  Thanks in advance...!

  Johnny

  Hi @JohnnyLee,

  Welcome to the HP Forums!

  I understand that you found the error, the problem with ink on your HP Officejet pro 8620 system. I'm sorry to hear that, but happy to help!

  I recommend going through this guide, printers HP - "Problem with print head", "Printer failure", "Ink system failure", or "0 x." r "C2."... "Displays Message error.

  If the guide does not help, please call our hotline at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• Satellite L50D-B-15Z problem with cooling system

  Hi, I have a laptop about a year ago. And for 5 months, I have a problem with the fans. Out and the following message is displayed:

  WARNING: A problem with the cooling system has been detected. Please turn off the power immediately and return it for service.

  The strange thing is that the first time that is spent stopped working a week, then a month and finally stopped working until 3 months there now will not start.
  I have even the implied warranty of the product, but I didn't think to send because it takes virtually every week for classes. I can use it, but if I perform actions that require superior performance as playing the games or download several videos at the same time to start warming up, getting the message and if continuous closed finally down.
  What should I do and how can I solve the problem?

  Sorry if I do not quite understand. I do not speak English.

  There may be dust stuck in the heat sink.
  using compressed air to blow dust through the vent.

• Re: BIOS version 3.30 Tecra A11/M11: problems with Ubuntu systems?

  I just got the updated BIOS version 3.30 on my Tecra A11/M11 invitation.
  I'm still under Win7 now, but plan to add a dual boot with Ubuntu when the next LTS strikes in April.

  Is anyone having problems with the new BIOS?
  Should I upgrade or leave intact 3.20?

  I don't find any evidence of trouble with 3,20.

  Why upgrade BIOS if everything is OK?

  In addition to as much as I know that Toshiba can't stand not the Linux operating system, and I doubt that the new BIOS would improve any Linux performance so, if you are satisfied with the version 3.20, stay with that

• Satellite L500: WARNING: problem with cooling system message

  Dear Toshiba

  Some may perhaps explain to me how that happens.

  We have 2 x L500 computers laptops, one was bought and activated a day of July 2010 (Computer1)
  The other was purchased 1 day later the same store and activated the same day - 1 day later (machine 2)

  Yesterday machine 1 responded with the warning message, there is a problem with the cooling system - please turn the machine off and return it for service.

  Machine 2 responded today with the exact same message, just after turning on after 4 hours OFF... an unusual situation say you or are - this sort of built in: service to generate the functionality?
  I'm not convinced it's a stroke of luck and there is nothing wrong with a machine that I could see.

  Anyway to reset every machine has solved the problem, see how long it takes to return.
  As you may have guessed, two machines are out of warranty by a few months now.

  If any of you have a similar problem, would be happy to hear from you.

  Kind regards

  Ernie

  Hello

  One of my friends had the Satellite L500. As far as I know the laptop works pretty well.

  I do not know if this message was created because of a software problem, but the laptop should automatically stops down if the cooling modules would not work properly and the temperature would goes up to a higher level of m

  So I recommend watching the temp for the next time level and of course, you could get in touch with a Toshiba ASP in your country if notice plu temp or a hardware problem with the module cooling

• What is the problem with my system restore?

  I tried to restore using various available dates and the message is failed to restore.

  [Transferred from Internet Explorer]

  I tried to restore using various available dates and the message is failed to restore.

  [Transferred from Internet Explorer]

  ====================================
  Sometimes other programs installed on your
  system can interfere with the system restore... usually
  a virus scanner.

  Do a restore of the system in Mode safe for a time
  before the problem started, may be worth a try.

  See the following articles:

  (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222

  Safe Mode boot can be tricky... try tapping
  F8 repeated as the computer starts.

  The following article offers another way to start
  in safe mode:

  How to start Windows in Mode safe
  http://www.pchell.com/support/SafeMode.shtml
  (scroll down for: Windows XP / using the system)
  Method of the configuration utility)

  The following article offers instructions in the use
  The system restore.

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

• HP officejet 4620 there is a problem with the system printer or ink 1000008 0x6

  PTR does not print page alighn.  keep saying "there is a problem with the printer or ink system 0 x 6 1000008' I turned market several times."  I unplugged.  I remove and reinsert the ink cartridges. I removed and reinserted the paper AND

  I always get the same message!

  This article should help to resolve the error you get:
  http://support.HP.com/us-en/document/c03081973

  Try the steps and tell us if it helps.

  Good luck!

• Problem with the systems

  Hi, I have a Hp pavillion dv 6426us, recently sometimes it freezes, and I have to turn off manually. I use firefox and it oftens gel too (not), it happens every time I use it for a few seconds or more, I have tried to reinstalled firefox and it still does this. even other programs like anti - virus, yahoo Messenger, nearly every program I use will do (no response) for a few seconds before it works. So I think I have a problem with the computer, what do I do to fix this? Thank you

  I backup your personal data and restore the system to factory condition. This will clear up all software problems.

• Problem with the disk free space.

  I use the power of fire 7100 (the 5.3.0.3 Version of FireSight 5.4.1.7 sensor Version). I have political problems that apply to the device. And is unable to update sensor for the newest version. Cisco support community help me! Thank you! They and I think that this problem can be in the use of the disk.

  What I oh sensor:

  Size of filesystem used Avail use % mounted on
  / dev/sda5 2.9 G 562 M 2.2 G 21%.
  / dev/sda1 99M 37 M 58M 39% / Boot
  / dev/sda7 67 67 G 0 100% but
  No 1.9 G 136 K 1.9 G 1% / dev/shm

  May be the problem with the records of Volume.What I could check and delete? Thank you!

  Hello team,

  * Could you please check the following points: -.

  CD/var/tmp /.

  du-sh *.

  You can clear the/var/tmp/en using the following. Files under/var/tmp temporary files are. :-

  rm - rf *.

  It is a known bug where the but gets completely due to Apply_ files *.

  * Also check the following points: -.

  CD/var/sf/updates

  Remove the old patches if there are.

  * Check the following backup folder and the folder of detection engine too.

  CD/var/sf/upgrade_backup

  du-sh *.

  CD/var/sf/detection_engines

  du-sh *.

  Rate if this helps you.

  Concerning

  Jetsy

• Problems with the system restore

  Try to restore system using System Restore.  getting the error "system restore was not entirely successful.  The system files and settings on your computer did not change.  Details: An unspecified error occurred during system restore.

  Have tried several times and get the same result.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Sound appears choopy on the computer, problem with his system and multiple programs.

  System model: OptiPlex GX620 BIOS version: A07 Dell Inc.

  Operating system Microsoft Windows XP Home Edition Version: 5.1.2600 Service Pack: 3.0

  I started to get choppy sound I think immediately after trying to play dvd on pc Sony mini. I tried all the xp help lines but nothing. So I tried to restore to previous date n that he had failed on 3 different dates with system check points. Any ideas? The sound is choppy on the system of sound waves, music from Media Player, itunes, the journal and disconnection of waves.

  Original title: his jerky

  I have attached the codecs that they did not help. I finally got a restore to work prior to the date that has begun and the problem seems to have disappeared. Then maybe some settings have changed in the background or I had a virus any. Has done a lot of analysis, but nothing came. Do not know if the same thing happened I I put in another dvd mini...

• Huge problem with the system on my laptop Acer s7-391 acer recovery disk

  Hi all, I'm really desperate as my laptop have stopped working for the weeks and I need it back

  First question: I installed the window 10 free upgrade successfully, however, I decided to restore the laptop through the window 10 plant factory restore Start menu because there were a lot of unnecessary files and after the window factory restore, I am unable to start again under the window and I get an error message says "no bootable device detected" and the computer goes into a reboot loop no way to factory restore to new outside the window. I try to reset the battery several times and nothing works!

  Second question: I received my acer restore disk that I got from the acer site because I didn't not create recovery media to when my window was working. So I pop the disk with a usb CD-ROM and I was able to get into recovery by the disc menu. However, when I try to choose the option of disk factory restore, he said to start from legacy mode. However, when I go to legacy mode he gave me an 0xc0000017 error code saying: not enough memory to create the virtual disk. If does not work reinstall drive

  Anyway to solve the above problems, should I do it before I jump into the Acer restore with legacy mode disc? Should I send it to Acer for repair? I really need this phone in working condition.

  Thank you guys!

  A live bootable CD is probably the best option for your situation:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  Download the .iso file
  then use a software to burn CD/DVD or USB flash drive and burn the .iso file
  Once completed, put the CD/DVD/USB on your PC, boot from CD/USB (maybe you need to start under the legacy if you have the UEFI BIOS)
  Press F12 on startup and choose the CD or USB
  at the level of the Office
  Select your HARD drive
  Right-click on the icon for your HARD disk, and then choose Remove all xxxx and click Yes, and then apply
  http://www.partitionwizard.com/help/delete-all-partitions.html#HOWTO
  or wipe your HARD drive completely (it will erase any GPT or MBR at the disk), choose the first option after selecting the clear function.
  Exit the wizard partition, boot from the BIOS, UEFI return of the Legacy (if you have the UEFI BIOS) and boot from media erecovery.

• problems with the system scans

  I wanted to back up my entire computer. Before that, I wanted to make sure that everything was perfect, then I ran sfc scan and there are corrupted files that have been repaired, but there is no repair for later scans keep the same report.  So I ran chkdsk with scan for and attempt recovery of defective and that just hung areas to where I had to make a hard stop.  So, I did a complete diagnosis of my hard drive and those of all the passes.  I decided to do a complete reinstall of windows and found that these same analyse the mistakes of follow-up. So before decide me the diagnostics that my computer manufacturer are somehow blotched.  I need to know how to solve this problem, if I can do a full backup.  I don't have a lot of time because my warranty ends at the end of this year.

  I wanted to back up my entire computer. Before that, I wanted to make sure that everything was perfect, then I ran sfc scan and there are corrupted files that have been repaired, but there is no repair for later scans keep the same report.  So I ran chkdsk with scan for and attempt recovery of defective and that just hung areas to where I had to make a hard stop.  So, I did a complete diagnosis of my hard drive and those of all the passes.  I decided to do a complete reinstall of windows and found that these same analyse the mistakes of follow-up. So before decide me the diagnostics that my computer manufacturer are somehow blotched.  I need to know how to solve this problem, if I can do a full backup.  I don't have a lot of time because my warranty ends at the end of this year.

  If you have a warranty, I doubt that you are using Vista.

  Vista has not been sold for many years and these are Vista Forums you are in.

  It's the informtion for Vista backup:

  If you want to make a complete PC Backup or a backup file only, buy an external hard drive.

  Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

  All editions of Vista can do backups of files.

  Here's how to back up and restore your files:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  http://www.home-PC-help.com/windowsvistabackup.html

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

  This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):

  «How to make a backup of the computer in Vista»

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  "How to restore a full backup of the computer.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  FAQ from Microsoft about backup and restore:

  "Back up and restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

  This program must be purchased:

  "Acronis True Image".

  http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

  These are free programs for the protection of the computer:

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If SFC detects serious flaws, you may need to perform a repair upgrade Installation.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.