HP Psc 1200 all in a series cartridge error

Similar Questions

• PSC 2410xi all-in-one: check cartridge error messages

  My printer started recently flashing error message saying "check and delete (I think) of print cartridges. When I take out them and put back them in the error message disappears, but returns in a day or two. So I replaced the cartridges ($90) and am still having the same problem. I'm lucky that I can still get to print, but I'm worried.   I didn't clean the cotacts of the printer on the computer because I do not see how to do it yet, but I read through old messages on this problem but can't see where a solution has been found...

  Does anyone know of this problem being solved far from being a new printer?

  The links used to point out and a little more visible. Click on the link above or here and it will open the document in a new tab or... Click here and it will be open to this page.

• HP PSC 1510 all-in-one: ink cartridge for HP PSC 1510 all-in-ONE - no dealers found

  Hello

  I am looking for black HP 92 (C9362W), but your body just says there are no resellers found. Is - this saying that I can not find this cartridge can? If Yes, what ink cartridge can use HP PSC 1510 all-in-one model?

  Thank you

  Erika

  Hello

  Please try (Canada):

  http://www.shopbot.ca/pp-HP-C9362WC-compatible-price-133571.html

  http://www.shopbot.ca/pp-HP-C9362WC-HP-price-35399.html

  http://www.myprintershop.ca/HP-c9362w-92-ink-inkjet-cartridge-black.html

  Kind regards.

• HP 1200 All in One Printer getting error this printer is blocked

  A very old printer. My disc is cracked and are no longer available to buy even HP.

  I get an error message, the printer is blocked. I have not checked, no jam and reset the same mistake remember coming upwards, and still unable to print.

  You may be able to download the drivers from HP here site:

  http://www8.hp.com/us/en/support-drivers.html .

  However, since you did not provide the version of Windows that you are using or the full model No. the printer (HP PSC 1200 for example), I can't give you more details.

• PSC 1401 all in a series

  My printer makes copies, but it will not be printed. It shows paper jam, but I took on the back and checked for any excess paper, none is. I unplugged the cable from the back and replugged. I checked all other strings, and they were ok. I don't know where else to go, as I said, the printer makes copies but does not print them from the computer. Any help would be appreciated. Of course I don't want to buy a new printer, but I might just have to, if I can't solve the problem.

  Hello

  You can try the steps listed in this document cannot print? Stuck print jobs

• HP psc 2175 all-in-one 'internal unexpected error"msg when I try to scan

  I've uninstalled and reinstalled the driver three times as well as restarting the program and my PC and I still have this error. I get the error no matter what program, I am trying to scan to.  However, I can copy documents so the scanner works - it just won't ommunicate to other software programs.

  When I ran the HP print and Scan doctor, I was instructed that the driver is unable to communicate with the product, but this has not been resolved by uninstalling & reinstall the driver such as already mentioned.

  He said also the "Twain" component may be damaged and a problem was found with the HP Digital Imaging Monitor.  Still, the uninstalling/reinstalling does not fix this problem.

  Help!

  Hello, SEF,

  You can try the steps of a solution in this document:

  http://support.HP.com/us-en/document/c01162234

  If the problem persists after you perform the steps described in the document, try to scan via printers & faxes if you have Windows XP or devices and printers, if you have Windows 7/8. You can find it via the control panel. Here, you should have an icon for the scanner PSC 2175 (he probably called something like PSC 2170 series).

  Kind regards

  Pontus.

• HP PSC 1600: "Remove and check right cartridge" Error Message

  First had error message with a reremplie cartridge.  Could not see something wrong and could not erase message so bought a new cartridge.  It worked once or twice, now have the same message.  I have removed and replaced several times without success.   What I'm looking for? Have turned off printer for days, but when lit, same message comes.  I can't wait to go buy a cartridge if the same thing will happen.

  This document explains How to fix the errors of rejection cartridge with the printer. If after completing the document, you still have the same error, the printer must be replaced. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

  Please let me know the results after following the above.

• PSC 2355xi all-in-one gets the error message on screen that begin with 0 x 88

  I wonder how to fix my printer or if I need a new. I hit the button, but it keeps going to a blue screen with errors on it after cycles. the errors all start with 0 x 88 can someone help me. I think the product number is Q5786A

  Here's a link below which may help you with this problem.

  http://goo.GL/gqbPC

  I would like to know if that was helpful, thanks.

• All-in-one 5610 cartridge error message

  I get a message saying that I use the wrong cartridge when I try to print a document, but I have been using the two ink cartridges for awhile with no problems.  I'm sure they are good!  Can someone help me fix this or reset my printer?  Thanks for any advice you can offer.

  The troubleshooting steps that are described in the page here may help.

• HP PSC 1210 all-in-one: could not open the HP Director icon to the desktop

  I installed the CD software for this fairly old printer on my laptop Windows 10 (64-bit). Everything seems to work fine except that I can't access the HP Director. I tried to check on the resources from HP site, but it does detect not all HP products on my laptop even if the printer is plugged in and on. Also, I searched for the car and the road status update on the site of HP tools. Even if I see my printer listed on the player page, it has no download button click next to my model. I was trying to see if the drive indeed download when I installed the software.  Again I don't know even though most everything works except for no access to the HP Director. I guess that the fundamental question is whether or not this now old enough (but still very good printer) can run on Windows 10. I used it before on XP. I'd appreciate any help with any of these issues. Thanks, Peggy

  Hello

  HP Director is not intended for Windows 10.

  The original CD was made several years earlier version 10 of Windows.

  Right click on the start icon and select programs and features, and then delete any software installed client the HP of your printer.

  Install the software by following the steps below:

  http://support.HP.com/us-en/product/HP-PSC-1200-all-in-one-printer-series/90763/model/90765/document/c01796879/

  Be aware that no full functionality is available for Windows 10 since it is an older model, scan and pritn base drivers are provided by the operating system itself.

  See "I have always used the HP and the HP Toolbox Solution Center. What I use now? "in the document for more information.

  Shlomi

• More HP psc 1200 series (all-in-one)

  MI more HP psc 1200 series all in a no prints porque el sistema reported that no tiene papel. He puesto cantidades of papel, pero continua respond that no papel tiene distintas. MI PC desktop are HP y tiene Windows 7 Ultimate. Gracias.

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace:

  http://support.Microsoft.com/common/international.aspx

  Gracias.

• HP psc 2410 photosmart all in one series, all of a sudden takes an hour to photocopy or print a page...

  HP psc 2000 series, model 2410 photo smart all-in-one series. Windows 7 operating system. Suddenly takes an hour for photocopying or printing. no error message. Transport print access door may have been opened during a previous print session. Power unit failure and restart and remove and reinsert the cartridges has no effect.

  This is caused by the failure of one of your cartridges. I don't remember if the PSC 2410 will support printing (do not copy) with a cartridge removed in reserve mode, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• Black cartridge HP PSC 950XI all-in-One HP 78XL mark stop error messages.

  Black cartridge HP PSC 950XI All - In - One HP 78XL mark stop error messages "" error: installed incorrect color cartridge ";" "" Install the color cartridge"and"install the color cartridge. I cleaned the contacts on the printer and cartridge and printhead. Cannot make it work.

  I've tried everything and still get error messages that continue to change so I can say that things are get cleaned but this cartridge is just not good. I ordered more than HP 78 and 78XL cartridge. If they show mistakes I'll let you know. Thanks for the suggestions, there was one that I had not tried before so I will certainly remember.

• Cartridges Stuck on HP psc 2210xi all-in-one

  I have a HP psc 2210xi all-in-one. When I turn it on, the ink cartridges get stuck on the right side of the transport, makes the machine a rattling as he wants to go, but does not work. How can I free cartridges, so they move backward on the transport? Under Windows XP. Receive no error message.

  Looks like it could be a blockage of the cart.  This give a try.

  http://support.HP.com/us-en/document/c00042632

• HP Deskjet 2540 all-in-one series printer need all the model compatible ink cartridge

  Need of compatible cartridges for HP Deskjet 2540 all-in-one series printer. Need all the compatible ink cartridge model #' s. hard to find here in Tahiti (Moorea).

  Hello @bubbamoorea,

  Welcome to the HP Forums!

  I understand that you need compatible ink cartridges for the Deskjet 2540. I will do my best to help you. I recommend the continuation of this entire HP document on cartridges. You can go to the website of HP SureSupply here, which shows the compatible ink for your printer cartridge (HP 61 black and tri-color 61).

  You can also buy these cartridges on this Web site. If you have any further questions, please let me know. Have a good night!