After you start the HP Vista laptop, the user account shows as a user of kiosk

Similar Questions

• After you start the computer, I get the error msg: "ProfileCnt.Exe has encountered a problem should be closed.

  After you start the computer, I get the error msg: "ProfileCnt.Exe has encountered a problem should be closed" can someone help me?

  Hello

  Some research suggests that ProfileCnt.exe belongs to a wireless card or

  Ethernet card.

  Work using the boot minimum troubleshooting to identify the troublesome program,

  then uninstall/reinstall this program.

  331769-how to perform a procedure to clean boot (XP & Vista)
  http://support.Microsoft.com/kb/331796

  Alternatively, looking for C:\Program Files for the file ProfileCnt.exe can tell you

  What program is involved.

  Don

• results after you start the netbook with the bootable usb key

  do you do after you make the bootable USB key and start your netbook and just windows 7 Professional can't choke and it want let me to upgrade or to perform a custom installation?  & What drivers should I install?

  If you want to upgrade your Netbook Windows 7 Starter to Windows 7 Professional, you must use the upgrade wizard Express Windows as well as the key to Windows 7 Professional.

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade from Windows 7 Starter to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation).

  Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

• Click of the mouse stops working after you start the first application

  Hard to explain this problem.  First time I click on what either in an application after computer startup (Word, Excel, etc.) the arrow of the mouse moves, but the click does not, anywhere, not on the desktop, taskbar anywhere.  Accentuates not delayed anything either.  But when I press ctrl-alt-delete, move the arrow down to start the Task Manager and click here, then click Start to work and things get even once highlighted and everything seems normal.  HP Pavilion dv9000t Vista Home Premium 32-bit Intel Core 2 duo, 2 GHz, 2GBDDR, this is going on for about 6 months now.  I just noticed, I installed a trackball logitek, and after installation, it does the same thing.

  Hello

  ·         What is the brand and model of the computer or the mouse?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to run the Microsoft fixit from link and check mentioned below.

   

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   

  Method 2: I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the results.

• After you start the desktop, nothing works.

  Original title: Windows Desktop does not.

  Hello. my laptop has a problem that is unusual. Yesterday it stopped responding by itself and I had to power off by removing the batteries. Now when I start my laptop, so that I can connect my windows account, but when he brings me to the office, that nothing works at all! I tried to restart my laptop, millions of times and nothing works at all!

  I left my laptop on stand-by and when I woke up now, there was a small note saying:
  Windows 7
  Build 7601
  This copy of Windows is not genuine.
  I'm surprised that why he said that to me when this window is 101% genuine and this does not let me do my job.
  Please help me ASAP! :)
  Karl

  Hi Karl,

  If you receive the error code 0 x 80070005 with the message, you can follow this link:

  Windows 7 displays "Windows is not genuine" with a 0x80070005 error code

  Hope the helps of information.

• Deleted documents/records office after you start the computer

  I start the computer as usual, and when it has finished loading, it had deleted everything on my desk with the exception of My Documents, desktop and Adobe Acrobat Pro 9 icons. It was a random event that I had no problems with my computer. Anyone know what's happened and how I can restore everything I had?

  Hi sa521,

  ·         You have all your documents?

  ·         You receive an error when you connect to the desktop computer?

  ·         Were there a change made recently?

  Method 1: Restart the computer to see if it boots normally with your user account.

  Method 2: Try to start the computer in safe mode and check the number.

  Just reply with the results.

• OutOfMemoryError immediately after you start the server from SOA

  Hello
  
  I have installed SOA suite 11.1.1.5 and weblogic 10.3.5 on my 64-bit machine Windiws 7 with 8 GB of Ram.
  
  I defined the following system variables:
  EXTRA_JAVA_PROPERTIES:-Xms512m-Xmx512m
  path: C:\Program Files\Java\jre7\bin
  
  I started Weblogic without any problem. When I try to start the server of SOA, it displays the following error.
  
  Health > < < critical > < BEA-310003 > < free memory in the server is 4 708 696 bytes. There is a danger or an exception OutOfMemoryError >
  
  
  Has defined the size of memory segment correctly. Please notify.
  
  Published by: 952205 on January 31, 2013 02:55

  Change it as below.

  EXTRA_JAVA_PROPERTIES:-Xms512m-Xmx512m

  EXTRA_JAVA_PROPERTIES:-Xmx1024m-Xms512m

• I have a problem with the connection to the computer after you change the user name.

  Original title: HELP

  I changed the username on my laptop and it is not letting me log

  I changed the username on my laptop and it is not letting me log

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you have changed the user name.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• Windows Wireless Network must be started manually after you start the computer to the top.

  Have been able to automatically connect to my home wireless network for 3 years.
  All of a sudden the wireless connection fails to start. Right clicking and selecting 'Diagnose and fix' update option 'start Wireless Network '. By clicking on this solves the problem until the computer is restarted.
  So, how can I make it permanent as it used to be? (Note: bluetooth and WiFi lights are light up front and aftering diagnosis)
  Of course some service, etc. has changed, but I can't understand which should be set to 'automatic' or missing etc service/process.

  Notes:
  I put everything as advised by the site of Black Viper for Vista Ultimate SP1 standard (sevices.msc).
  Startup is normal (msconfig)
  Network and sharing Center is attributed to all (except password protected sharing)

  System: Dell XPS M2010 (no hardware changes - all original)
  OS: Vista Ultimate with XP1 update (not install them, re-installed original)

  Any advice greatly appreciated.

  Wayne

  Hi James

  Tried SFC/scannow - no problem found.

  I tried services.msc - noticed WLAN on manual, set to auto, rebooted, the problem seems to be solved.

  The big question is how does 'manual' - no account required to this idea is the only way that it connects to the home network and Internet.

  So just to let it auto update do its thing and reload the Windows updates that may have been cancelled.

  Grateful for your assistance.

  Concerning
  Wayne

• a few minutes after you start the computer I find a stream somewhere cannot know where or turn it off

  It seems to be a sort of radio or television feeds, but change little each bar display minutes as no flow tools only RSS or web slices not just images overides sound all other sources

  Launch your browser, and then (for IE) tools > Internet Options > advanced > Multimedia > uncheck "play sounds in Web Pages" > Apply > OK.

  Then:

  Run your antivirus, malware, spyware or programs. Remove extra.

  Launch your Web browser and check out the plugins. Delete everything that you never asked to be installed. Close the browser and reopen it. If the sound of the radio is gone, you can tick "Ion sounds Web Pages"

  See you soon,.

  Jerry

• Error after you start the stand-alone weblogic Server

  < 22 January 2011 19:32:36 AST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >
  < 22 January 2011 19:32:36 AST > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >
  IntegratedWebLogicServer start time: 311391 ms.
  IntegratedWebLogicServer has begun.
  Manager of the < logger > < error > ServletContainerAdapter not initialized successfully.
  
  Help, please...

  Ignore the error
  See logging and auditing 361988
  http://download.Oracle.com/docs/CD/E13217_01/WLOC/docs10/notes/known_resolved.html

• 500-internal Server Error - after you change the user public apex

  Hello

  I executed change order use to change the password for apex_public_user new password but he beat Apex earpiece and entire work of workspace cant Apex now, how can I solve this problem?

  Apex 4.2.4,

  Thank you.

  Tony,

  When I run the apex.war file and specify the same values as before / previous samples below will suffice that or ive to modify other files after that because we already have existing environment with application developed, but I don't want anything an impact?

  java-jar apex.war of installation

  May 1, 2014 11:36:03 oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder

  INFO: Using the configuration file: / u01/app/oracle/apex_listener/apex

  Enter the name of the server database [localhost]:linux03.vbox

  Enter the database listening port [1521]: 1521

  Enter 1 to specify the database service name, or 2 to specify the SID database [1]: 1

  Enter the database service name: snap11g

  Enter the database user name [APEX_PUBLIC_USER]: APEX_PUBLIC_USER

  Enter the password for the database for APEX_PUBLIC_USER:password1

  Confirm the password:

  Enter 1 to enter passwords for users of database Services RESTful (APEX_LISTENER, APEX_REST_PUBLIC_USER), 2 to use the same password that you used for the APEX_PUBLIC_USER, or 3 to skip this step [1]: 2

  Update may 1, 2014 11:37:12 oracle.dbtools.common.config.file.ConfigurationFiles

  INFO: update of configurations: by default, apex, apex_al, apex_rt

  Thank you.

• Qosmio G50 - 12 q - Vista does not load after you connect the external USB keyboard

  I could acquire an enermax acrilux usb keyboard and have connected the keyboard taken 12 q at the same level where another keyboard was attacked the qosmio g50 usb and it worked without problem.

  After to start the PC with keyboard eneramx connected the qosmio has not loaded windows vista Ultimate edition and the inside wheels have been activated.
  Never happened before. I doubted the enermax

  Reconnected to the position of the qosmio USB, there on the back not granted to start-up of turbines problems
  As the enermax, that he has never blocked the startup of the operating system and to activate turbines also have plugged into the same USB port to which priority was connected a keyboard?

  Tank you

  Hi mate

  Sorry, but you message I am really hard to understand
  What I understand is that you connected an external keyboard on the Qosmio and now the laptop will not boot properly. Is this good?

  What to say; Maybe you disable USB legacy mode in the BIOS.
  Please check this!
  To enter the BIOS press F2 and everything by turning on the laptop.

• After I start my computer dell laptop I connect the LAN cable to run internet ON my laptop but it doesn't detect LAN cable

  Hello..

  After I start my computer dell laptop I connect the LAN cable to run internet on my laptop but it does not detect the LAN cable, using the ultimate32 bites. (But if I connect LAN canble then start computer it works fine)

  Hello

  1 windows operating system is installed on the computer?

  2. do you think that no matter what error message in Device Manager? If Yes, what is the full and exact error message?

  3. What is the number of brand and model of the computer?

  Method 1:

  If you are using Windows 7, I suggest to see the link and try to run the troubleshooter and check if it works.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  The link applies to the Windows Vista and Windows 7 operating system.

  Method 2:

  Check the link and try using the network troubleshooter to fix the problem.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also:

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Method 3:

  See the link and check if it helps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps.

• Windows Vista, it will not move in front of the 'Welcome' screen after you enter the administrator login password.

  After you have installed an in place upgrade to Windows Vista, it will not move beyond the 'Welcome' screen after you enter the administrator login password.  The computer works fine in safe mode with network, however I am unable to boot normally without hang on the screen 'welcome. '

  (the system is running pre - SP1)

  Hello

  Start the computer to boot in safe mode with network and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.