HP psc 1210 with Snow Leopard not scan

Similar Questions

• My PSC 1210 all-in-one not Scan after the recent software update

  There is no if long software update asked me to install the last change of HP software. Which is curious, because when I look in the download, the last of them for OS10.6 section, which I run, was released in 2009.

  Before, I scanned successfully by using the Print & Fax system preferences.

  When I did it today, thogh, after choosing the option to Scan and then open Scanner, I would get the message that there is 'no scanner not selected', although HP psc 1200 series at the top of the screen. I tried scanning several times and got the same result every time.

  What can I do to get this working again?

  Hmmm, that seems strange that you will receive an update for a PSC 1210, because I do not think that there has been updates this software for years.

  Have you tried to uninstall the driver and then reinstall?

  You can find the instructions to uninstall here: http://support.hp.com/us-en/document/c02259020

  And then re-install the driver by clicking on: http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&docname=c02259020&lc=en&os=219&product=90764&sw_lang=

  Click on drivers & downloads and select your operating system (Mac OS X) from the drop-down list and click Next.  Expand the sign next to the driver - product Installation software (8) + and then download/install the driver for 10.6.

• PSC 1210 and Snow Leopard

  That's what I've done so far - unfortunately without success.

  Uninstalled all HP pre - SL software. Downloaded the latest driver from HP for my PSC 1210. Driver installed. Restarted the MacBook and connected the printer.

  The pilot appeared to acknowledge that the printer is connected/disconnected.

  Tried to print a simple document to MS Word for Mac / Adobe Pdf / listen to extracts; the printer driver starts and loads the document in the queue then nothing...

  Since then I repeated the installation process twice. Still no luck.

  Any help would be appreciated.

  Thank you.

  Have you deleted and added the printer in the print queue?  Let's try it:

  -Sys Prefs, Print & Fax

  -Select the printer in question and click the sign less down the list

  -Select the sign and add it again.

  If this does not work, do the same thing, only instead of the second stage, right (control), click the box of the print queue and select Reset Printing System.

• HP All in One Photosmart C7280 scan issue with Snow Leopard

  Hello

  I bought my wife a new cool Mac mini. So it comes with Snow Leopard. We use it for our activities with an HP printer all in one Photosmart C7280. Unfortunately the scanner does not work. I did the mistack to install HP driver from the HP website and read after documentation of the HP Web site (probably like all users). So I decided to completely re-installed the machine (as it was new) and follow the installation procedure for HP who, to say that the pilot is coming up with Snow Leopard. After the new re - install, so I installed 10.6.1 patches and last HP driver from the site Web Apple as mentioned in the forum. (version 2.2)

  The printer is correctly detected, but there is no way mak it work the scanner on HP procedures. The scanner is not recognized at all, and the printer configuration window is not appearing the scanning tab as it is supposed to. It seems that the scan part it does not work in one.

  We love HP printer and it will be great to see it fixed.

  My network configuration is very simple:

  -192.168.0.176 is the IP address of the HP printer with 255.255.255.0 netmask

  -192.168.0.106 is the MacMini (3.1) IP address mask subnet even

  All connected using a router D-Link (5 ports).

  Printer/scan function works perfectly on our other Mac systems that are under Leopard. I tried to install Leopard on the new mac mini, but the installation DVD that we have (10.5.4) does not start successfully on the machine. We are so stuck.

  Any help really appreciated

  Jean-Marie

  Hello

  Good news, it worked. But I think that the problem came from the D-Link router that I used. Upnp has been set to allow, and it seems he mistook the discovery of the device. I proceed to turn off and the live showed you me overdrawn the printer on the network. I installed it, and the scanner has been recognized.

  If I turned my back to Activate Upnp, the scan function is dead. Thus, it probably is a problem of compatibility between the leopard to snow and this Protocol. What is strange, is that our whole system of leopard work with upnp enable or disable.

  Anyway thanks a lot for your help!

• OfficeJet 6210 does not work with snow leopard

  My officejet 6210 worked very well on Mac OS 10.5. Now that I have snow leopard, when I try to choose my printer in system preferences, it says some software are absent, and the service program does not open. When I try, I can't print from MS Word and get the error "could not start the filter" / Library/Printers/hp/cups/filters/commandtohp.filter/Contents/MacOS/commandtohp "-operation not permitted.» Stoppage of work because the Scheduler could not run a filter".

  I installed new software/drivers on the web for Mac OS 10.6, even if the software/drivers are supposed to come with snow leopard. I tried all versions of deleting and adding the printer, restart the mac and printer, etc.

  Help! Ideas in addition to give up and go back to the old operating system or buy a new printer?

  You always had the hp for 10.5 software on your Mac.  Either uninstall or install the new software does NOT uninstall the 10.5 software correctly.

  Try this:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  If this does not work, install the wrong since the CD software (for 10.5 and earlier versions) and above of uninstall routine to run the extraordinary.

  After you get it to work, I would recommend against installing the HP software for your printer.  Scan by using the Capture of Image application into your Applications folder.

• NAT with Snow Leopard issue

  For the poster who will say "Google is your friend", no it is not, or I wouldn't be here.

  I tried for a while now to solve the only problem I have with Snow Leopard Server.

  MySql has fallen lion and, apparently, no one knows how to use postgrl so I installed MySql and plundered with her for a few hours to get this working.  There were various other issues with Lion.  Finally, I went to Yosemite.  Hey Apple, where is the GUI?  Then at el Capitan and finally tried Sierra (no server app at all yet).

  For me, each 'step-up' taking things and running weaker than the last.

  Welcome to Snow Leopard.  I'll stick with it for a while to come.

  The only problem I have with Snow Leopard, it's that when it restarts, the NAT will not start upward.  Other than that, it does a magnificent job to maintain my home network.  I searched high and low for an answer without success.  A few posters who have addressed this problem specifically here never got a response.

  As this seems to be about three years or more, since this question was asked and it seems that some have migrated to the SLS, I was wondering if anyone has found a solution.

  As it is now, as soon as there is a need to reboot, I just disable the NAT service, restart and turn it back on.  In the case of a failure of current (longer than the inverter can maintain) or just a random crash, I have to kill the firewall and NAT then the configuration of the gateway of new service that requires fixing the various omissions and errors and I'm good to go again.

  Any help would be greatly appreciated.

  You have posted in the forum of Snow Leopard Client.  I ask that to move this post.  In the meantime, you can see the various forums about this trick:

  http://discussions.Apple.com/docs/doc-2463

• read the format exfat with snow leopard

  I can't read format exfat with snow leopard. I use to be able to with an easilely program found on google, but since I reinstale my Os, I can't find. Someone know where I can find it? Thank you very much

  exFAT, fat32 and ntfs are supported by Snow Leopard as reading only formats without 3rd party software.

  10.6. possible it's not like block size, trying to backup, then fitness.

  or copy the data to another device in another format.

• Cannot synchronize my mac with snow leopard 10.6 with my itunes on iphone

  I use MacBook with Snow Leopard, version 10.6 and sync to my iphone with itunes 6.

  For these last months, the computer commented that the itunes on the iphone was not updated and cannot sync.

  But the itunes on the iphone is the latest version. Is the obsolete software in my MacBook? What should I do?

  Operating system of your computer is obsolete. A device running iOS 9 requires Mac OS X 10.8.5 or newer for synchronization; a MacBook must have an identifier of model at least MacBook5, 1 to run a compatible operating system.

  (143247)

• Is updated to V1.1.00.20 D6200 firmware compatible with Snow Leopard (OS 10.6.8)?

  Before updating the firmware, is the firmware upgrade compatible with Snow Leopard (OS 10.6.8) V1.1.00.20 D620 and there are problems of people had at the time?

  We're already having routing problems (the line is ok, but wifi creates connection problems, loss of packages and huge lag) so I don't want to upgrade my computer will not be able to enter the router system, otherwise it will mess up things more far.

  Hello Shemja

  Yes, you'll be well updated the firmware, it should not affect connection to the modem.

  DarrenM

• Business Inkjet 1200D with Snow Leopard?

  Hello

  I have a HP Business Inkjet 1200D and want to update to Mac OS X Leopard 10.5.8 to 10.6 Snow Leopard. I have discovered so far this printer is not supported by the snow leopard or Gutenprint.

  Could someone please tell me if it will be released a printer for Business Inkjet 1200D driver that can be used with Snow Leopard?

  If so, can you estimate how long it will take until that this driver will be available?

  Thank you in advance!

  best regards mxFred

  If you use the Leopard 10.5 DVD and run the installation of the optional system, you can install the drivers of 10.5 HP and it worked for me. I don't know why HP says it is not compatible because my HP Business Inkjet 1200 works now fine with Snow Leopard.

  Message edited by Paul_H on 04/09/2009 03:31

• Is CS4 after effects of Master Collection Compatible with Snow Leopard 10.6.8?

  Hello Gang

  I've seen different views on the compatibility of the products of the CS4 Suite in 10.6.8 Snow Leopard.

  Does anyone know if CS4, After Effects , of the "Master Collection" is compatible with Snow Leopard 10.6.8?

  Thank you

  Just click the link and scroll down to CS4.  It does not support 10.6.8.

• What Creative cloud compatible with Snow Leopard?

  Hello is creative cloud is compatible with Snow Leopard?

  Hello

  Please see the below Document:-system requirements | Cloud Creative

• I bought CS4 - have the box etc serial # - use an IMac with Snow Leopard - went to use the bridge and a screen came saying Adobe Bridge HOme Service was interrupted to concentrate on other resources... uh, I bought this software and how can we now

  I bought CS4 - have the box etc serial # - use an IMac with Snow Leopard - went to use the bridge and a screen came saying Adobe Bridge HOme Service has been discontinued for focus on other resources... uh, I bought this software and how it can now be 'gone '? Pls help - bridge is very convenient and I paid for it!

  See here:

  Deleted Adobe Bridge Home service

• CS4 compatible with snow leopard?

  Hello

  I'm a little behind the 8-ball and finally research by taking a first step to upgrade my Mac to Snow Leopard 10.5.8 to begin with, but before that I need to know if my CS4 package will work with Snow Leopard.

  Grateful for any help.

  Thank you very much

  Try http://blogs.adobe.com/jnack/files/Adobe-SnowLeopard_FAQ.pdf

• HP OfficeJet J4580 scanning with Snow Leopard

  Hello, yet another problem in Snow Leopard here.

  I've recently updated to Snow Leopard after already installed the drivers under Leopard. The printer was not connected at the time, so no snow leopard drivers have been installed.

  I followed the instructions in this link to make it work under Snow Leopard:

  http://support.HP.com/us-en/document/c01846935

  I uninstalled the software HP previous, then deleted the printer to print & Fax system preferences.

  I then added the printer again and he selected in the list. Drivers have been downloaded and installed by Apple.

  Printing works perfectly, but there is no option to scan anywhere. Not in the Pref, preview or Capture pane. I even tried to delete and Add again with no luck

  If someone could shed some light on why this could happen, it would be much appreciated.

  This seems to have corrected itself with a reboot. Sorry, I'm not used to having to restart my Mac. It is normally a thing of Windows