HP PSC 1610 malfunction

Similar Questions

• PSC 1610 all-in-one

  Can I e-print to my HP PSC 1610 all-in-one?

  Hi JudithAMorrison,

  Just to add some additional information for you, your PSC 1610 is not able to ePrint, as it was released before that HP has applied the ePrint technology for their printers. All new printers are usually capable ePrint, so if you are wanting to acquire a range of HP active ePrint printers, you can contact HP Technical Support at the 1-800-474-6836 and see what kind of offers, they have to get you an active ePrint printer.

  If you need anything more, please let me know. Have a great day!

• How to remove memory card from my digital camera to a PSC 1610 all-in-one

  I first took my Sony Cybershot memory card and it is stuck in the slot of the PSC 1610. It seems that the printer/scanner read the card properly because I was able to print a photo proof.

  I tried to use Picasa on my MacBook Pro to transfer the images from the memory card in the printer to the laptop. That doesn't seem to work, so I would get the card memory of the printer/scanner. I don't think just pulling on the map, it's the correct procedure... how to get out? I pushed several buttons on the PSC 1610, nothing helps.

  Any suggestions?

  Hello

  1. is not a good idea to copy photos, files on camera, specially made in the shape of these cards memory cards.

  2 normally, just gently push the card once again, and then exit, the card should come out.

  3 you must map the map as network drive until you can access the card of your computer (s). Here's how (valid for all memory cards):

  http://support.HP.com/us-en/document/c00149194

  Kind regards.

• PSC 1610 all-in-one printer: PSC 1610 will not print

  HP PSC 1610 all-in-one

  No including photographic paper feed and the following messages are received: paper jam or paper. This is not correct. Jam has recently replaced; all paper rolls have been cleaned up with water. Any advice would be appreciated.

  Thanks for your reply. I think you are right to say that it is a hardware sensor problem. In the circumstances, I'll buy a new printer/scanner/copier.

• I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer.

  I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer. What could be the problem and how can I fix it?

  Hi Dee,

  Please contact Technical Support for assistance with your printer HP: http://www8.hp.com/us/en/support-drivers.html.

  Good luck!

  Kosh

• HP Psc 1610 all-in-one: Hp psc 1610 without Windows installation

  I'm trying to see if my printer will be able to work without the Windows installation disc. I have a HP PSC 1610 all-in-one printer. I'll buy the cable from Sun to hang it to the top, but I can't find the drive mentioned in the installation program. I don't know if it makes a difference, but I have a MacBook Air with Windows. Comments would be appreciated for what I can determine if I need to buy a new printer.

  Windows 10 has a 1600 integrated printer driver, just us the option to Add a printer in Printers and devices.

• HP psc 1610 install problem - once it is plugged in, the Hardware Wizard takes control and then fails to configuration

  I'm not able to install a hp psc 1610 all in one Windows xp on one of my computer. Once I plug the Hardware Wizard take control and finally Miss installation
  I do installation even on my second computer and done everything very well. I don't know what the problem is! both are wxp 2002 sp3

  Hello

  · You receive an error message or error code?

  You can see the link and search for troubleshooting steps about the error message or error code that you receive the printer.

  Link: http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=37654&tmp_task=solveCategory&cc=us&dlc=en&lc=en&product=390315

• I have a hp psc 1610 all-in-one printer

  my continuous printer give error message paper jam, I checked and there is no paper in the printer you can tell me how to solve this problem, I have windows xp I have uninstalled and reinstalled software but get the same message

  There is a document that addresses the issues of paper jam in PSC 1610. This document can be found here.

  Hope this helps

• Solution Center HP PSC 1610 unable to give ink levels.

  Message "ink level is not available", and I can't get the ink levels.  At the same time he gave me the levels, but now I can't. Tried to uninstall and reinstall the HP Solution file using the DVD and the download, but nothing has been resolved.

  After all the suggested me has given on the Forum, I finally uninstalled the PSC 1610 printer software and other printing software (model 3050 a) that had previously been uninstalled). By restarting the computer, I found a message about the problem starting with the 3050 a sotware which I thought was deleted (uninstalled too).  After searching around for a solution, I stumbled upon the startup file that had a file 'monitor ink levels ". I deleted this file.  After you have reinstalled the software PSC 1610 using the HP DVD I bought, I was FINALLY able to get the graph of ink level HP Solution Center!  Perhaps my accidental solution can help someone else, so I write this message.

• Not printing color (only BW) when using PSC 1610 Pro Mac OS x 10.9

  PSC 1610 attached to the Mac Pro OS x 10.9 for the first time (printer was already used successfully with Snow Leopard on MacBook).

  First, I changed the ink cartridges. Test the printer print is successful and shows the colors.

  Printing a photo or a computer page is only in BW. I don't see any color in display control Printers & Scanners or in file/print.

  I need help! Thank you!

  Hi Reg1nald

  Generally, you have nothing to do when you upgrade, but you are missing the options for color with this driver.

  I would like to Uninstall the old software since you have migrated the files and the wrong driver could be installed. You can install the software by following this document.

  Check and see if you have different options in the driver now.

  Let me know.

• Relocation of the HP PSC 1610 printer

  I accidentally deleted the necessary program for my HP PSC 1610 all-in-one work on my computer. I have the original and the inserted disc when asked by the installation wizard.  But then he asked "cd hp", which I can't find. Is there any way I can recover what I removed from "Add or remove programs"?

  Hello

  One option is to use Windows restore to restore the system back. Another option is to download files from HP and reinstall them. Here is the link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=390315

  Kind regards.

• Remove and check color HP PSC 1610 printer cartridge error message.

  Original title: remove and check color cartridge

  My printer HP PSC 1610 rpet 'Remove and check color cartridge'. After that, I press 'ok' and the message still appears. What is the problem with the printer? Thank you.

  Hey cobra10,

  Fortunately, there is an article by HP Knowledge Base that talks about this problem. Please follow the solution provided in the article below to solve the problem.

  Remove it and check [color / black / photo] error message appears on the screen of control of product and the product does not print.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Receive error message when printing on printer HP PSC 1610

  Original title: I use a HP PSC 1610 printer. Whenever I try to print I get an error message. I have already uninstalled and reinstalled the printer, but keep getting the same results.

  Whenever I try to print I get an error message. I have already uninstalled and reinstalled the printer, but keep getting the same results.

  Hi RLindorff,

  1. When did you start to question?

  2. you remember to make changes to the computer recently?

  3. What is the exact error message you get?

  4. does this happen when you try to print to a specific application?

  You can visit the following links and try the Fixit or consult the solutions to some common problems with printing:

  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forumand let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unrecognized PSC 1610

  Please help, my cousins computer does not recognize the printer. I tried hp doctor, the patch and driver installation.the computer is a printer hp pavilion p6654y running windows 7 is a hp psc 1610 all in one printer copier and scanner. Also bought a new usb cord the computer reports when I connect but is not communicating with the printer.

  Hello

  Welcome to the HP Forums!

  I understand that your HP PSC 1610 is not recognized on your computer Windows 7, and I'm happy to help with this problem!

  Please have a look through this installation guide. Windows: "Device Setup has not completed" or the "Unknown device" Message appears on the computer during the Installation USB.

  Hope this fixes your problem and have a nice day!

• PSC 1610 now scans and copies black Uni. Prints very well.

  My HP PSC 1610 all-in-one lost the feature since I replaced my iBook G4 with OS X 10.4.11 on an iMac with OS X 10.7.1.  Scanned using Capture of Image Preview images are black.  Copies made on the PSC are also black.  I noticed that the first use of these features with my new iMac, but the problem could date back to before the computer change because I scan and copy is rare.  Is there a way to determine if this is a software problem or a hardware problem with the bed scanner PSC?

  Well, we could reset the system to the printer by unplugging the power supply on the back for 30 seconds (do not turn the printer off first), then plug back in and turn on.

  If it still does not work, its probably time for a new printer.