Solution Center HP PSC 1610 unable to give ink levels.

Similar Questions

• Example: HP Officejet 6310: unable to check ink level hp officejet 6310 windows 8.1

  I'm unable to check the ink level on hp officejet 6310 8.1 Windows - HP Solution Center is not available on this PC.

  Hello

  Downlaod and follow the HP printer install wizard below, it will get and the installation of the full features software. This includes the HP Solution Center Software:

  http://ftp.HP.com/pub/softlib/software12/COL50403/MP-122330-1/hppiw.exe

  Please let me know of any changes,

  Shlomi

• in Windows 7 How to check on HP PSC 2210 all-in-one ink levels?

  With Win 7 drivers (and), what is the way to check the ink level in a PSC 2210?

  Thank you!

  [Personal information] HE DIDN'T THERE HAS NO HP PRINT DRIVERS ALLOWED THE WINDOWS PLATFORM 7!  No, natta!

  Installation of the printer software in Windows 7 for wired USB (to READ)

  http://support.HP.com/us-en/document/c01796879

  'Introduction '.

  The drivers for your HP product are already included in the new Windows 7 operating system. You don't need to download the drivers to use the product . Simply connect the printer to your computer with a USB cable, and Windows Update automatically installs the driver for your product. »

• Printing problem after upgrade HP solutions Center / windows 7

  Hello everyone,

  Since I've updated my PC for windows 7 (and a new version of the HP Solution Center), I can print is no longer any document (the only way to get something out of the printer, print a test through the solution Center page).  Communication is Ok (correct ink levels etc.).  Printed materials appear in the print queue, and then disappear as if they are printed, but nothing is (no error message).

  I have Windows 7 Home premium, to C5180 all-in-one USB connection.

  I already tried the HP diagnostic program and uninstall / reinstall.

  Any suggestion is welcome.

  Thank you!

  I would like you to try this.  Unplug the usb cable from the printer and uninstall the printer software.  Then go to this link http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1153481&lc=en&cc=us&dlc=en&lang=en&cc=us select 32 or 64 bit and install this "HP Print fix software when upgrading Vista to Windows 7" then reinstall your WIndows 7 software for this printing.  Let me know if this solves your problem

• HP PSC 2110: need HP solution center software for hp psc 2110 running windows 7 32 bit

  Hello

  The HP Solution Center software has disappeared since I move my laptop HP OS from Vista to Windows 7 32 bit.  I use HP Solution Center for the years software to create PDFs of the documents scanned the printer HP PSC 2110 all-in-one.

  Can you give us the link to download Win 7 HP Solution Center software? I searched on the HP support site using the name of the HP PSC 2110 product, he pointed me to the section of the driver; I followed the instructions, but there is no link to download the software.

  The printer is connected via USB and works fine.  That's all just annoying that I can't use the HP Solution Center software (previously Director of HP) to copy documents scanned to my computer.

  Thank you.

  You are welcome.

  You can download it from the following link:

  http://sourceforge.NET/projects/naps2/files/3.0b1/naps2-3.0b1-Setup.exe/download

  This means that as an older model, its functionality is limited, but there are a few available workarouds. It is surely worth a try.

  For a wireless printer you will need another printer indded, there are many factors to consider and recommend any specific printer, you have specific needs? would be for example you use a fax or not, I guess, it should be a color with a scanner printer... Do you use to print photos or more often good for a daily newspaper, printing and scanning capabilities, these factors may affect strongly any possible recommendation for more information you will find useful.

  However, any current HP device with a scanner supports scan PDF scanning in the HP software.

• HP Photosmart C4480 all-in-One gives the HP Solution Center error

  Hello

  I have a HP Photosmart C4480 all-in-One printer. I also have a laptop HP Compaq Presario CQ60 with Vista.  These two are under the age of one year.

  I just used the ink contained in the supplied start with my printer ink cartridges, so I replaced the. The problem that I was going on even before I replaced the cartridges.

  When I run the HP Solution Center, it says at the top:

  "HP Photosmart series C4400

  Disconnected! »

  When I click on the Toolbox, it gives me an error will appear: "the computer is unable to establish two-way communication with the device.

  Well, it is certainly connected and it prints, copies and scans very well.  I'm used to be able to check on my ink level. Now, the solution Center think my printer is not yet connected.

  Any ideas?

  Thank you!

  HP Envy m7 running Windows 10.

  Simply click on the star

  Thank you

• C6180 scan works very well from the printer to the pc, but hp solution center gives error 4, [(3,42,0)]

  Photosmart C6180 wireless unit connected to your PC running windows 7 64-bit ultimate.

  Scan worked fine but after some update (I have not seen that and when) stopped scan from the hp Solution Center. It gives an error 4, [(3,42,0)].

  If I scan directly from the printer, it works fine, even if I send the jpg for the PC images\Mes traverses the directory.

  I already deleted the hp Solution Center and reinstall it using AIO_cda_FSW_Full_Win_WW_130_140.exe

  Thank you

  hasksm

  Hi there hanksm,

  I'm sorry to hear about your problems with your Photosmart C6180 and Windows 7 scan and notice you receive the error code. I studied the error and found a position with a person with a 'Solution', so hopefully this will help your situation.

  Please see JasonBlake7 post: scanning error

  Please let me know how it goes and if you need help!

  Thank you

• I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer.

  I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer. What could be the problem and how can I fix it?

  Hi Dee,

  Please contact Technical Support for assistance with your printer HP: http://www8.hp.com/us/en/support-drivers.html.

  Good luck!

  Kosh

• I had a request on Windows Live Solution center and request still pending, cannot not find post or even open window Live Solution gives error!

  request lost post on window for e-mail folder

  I post a request on Windows Live Solution center about 27 July give my email name - and request still pending, not found or even open window Live Solution gives error!

  the application in question was: when I put in order my window live folders mail had become unstable, I remove a double folder which appear empty, I moved subfolder of a folder and subfoulders lost.

  I've lost Business-Optus DSL-city of Luigi Swan - Bank - various - Computer.They contain information that was not save on my important document

  My request was if possible to recover them. Happened this week is so cool to be given there.

  Thank you

  Luigi

  Hello

  The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/product.aspx?ProductID=10

• HP psc 1510 all in one "Solution Center".

  Product name: HP PSC 1510 all-in-one

  OS: Windows 8.1

  My HP PSC 1510 all-in-printer software has become non-functional. I need to download a full installation of the software. I am subject to the sites with drivers. The complete program, WITH SOLUTION CENTER needs to be reinstalled. I don't see that accompany the right drivers.

  I found several sites with the complete list of problems and solutions, even if I tried to restrict the search.

  Could someone please locate this complete? A link that includes the center of Solution would be wonderful.

  The original disc is old several years and normally install on the 8.1.

  Thanks in advance for any help. The hair that I'm pulling too thanks!

  Sincerely

  franm

  Hi FCiurczak,

  Don't pull your hair out, I'll have you happy that you didn't want in no time

  This download includes the HP Deskjet and Officejet Software Suite (advanced imagery and product functionality) and driver. HP Deskjet and Officejet full feature software and drivers.

  Having said that it is version 14.8 so I'm almost certain, that there the Solution Center. Please let me know if that solves the problem.

• HP PSC 1315 scanning painfully slow with HP 13.1 on Windows 7 Solution Center

  I just upgraded to Windows 7 Premium 32 bit XP and installed the HP Solution Center 13.1 software.  I created my preferences of scanning for documents at 200 dpi with shades of gray and when I scan a document, the scanner is extremely slow and it looks like it would if I were scanning at 1200 dpi.  He never used to do this with the older XP HP Solution Center.  Y at - it a fix for this problem.

  Well, the client replied by a PM to confirm the following information:

  Previous analyses is produced in 5-7 seconds, current scans take longer than 50 seconds in PDF format. Copies to print during the normal 5-7 seconds.

  You can acess Windows Fax and Scan and try to make an analysis of this program or MS Paint to let me know what the time is for a WIA (Windows Image Acquisition) scan?

  Get back to me after that and I'll repson with as much information and assistance I can!

  -Spencer

• All-in - one Photosmart C8180: I'm unable to use the HP Solution Center to scan a document into the computer.

  I downloaded the updated driver that is located on the HP site for this printer. I uninstalled and installed this driver three times. I keep getting an error message when I use the HP Solution Center to scan a document to a PDF file. I restarted the program, rebooted the computer and reinstalled the software, as had been suggested in the error message.  I'm losing my patience! Anyone have any ideas as to the cause and the solution to this problem?

  Hi @AMDK,

  Thanks for getting back to me.

  This is a document of support that has alternatives for scanning when Windows 10 does not work with the software of the printer - Scanner without HP (Windows 10) software.

  If it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

• Unable to get the HP Solution Center to load. I uninstalled and installed printer three times.

  I uninstalled and installed three times and it shows loading, but when I click on Solution Center, I receive an error message that reads, aircraft No. HP was detected. HP Solution close now. All the answers?

  only 2 possibilities...

  1. fire barrier blocking solutions-solution Center: temporarily disable the firewall for insulation

  2 - PC registry problem-solution:

  Click Start > run and type sfc/scannow, and then click OK.
  Note the space between the c and the /.
  You may need your Windows XP CD so that it is ready.
  If you have Service Pack 2 (SP2) or installed SP3, you will need the SP2 or SP3 version of the CD version. This can be done with a CD borrowed, if you do not.
  Allow the analysis to run, and once completed, restart the system.

  If not resolved, reformat the pc & then install the software before any other hp software. Make sure you backup all your files...

• HP Photosmart C4700: unable to scan to HP Solution Center in Windows 10 PC

  I am able to print on my printer and make copies directly on it, but whenever I try to scan to my PC I get a message saying: could not perform the analysis because another program or computer using the networked HP imaging device. Try again later.

  Extended error information are 8, [(0, 18,-2147467259)].

  I have tried electric bike on the printer and have even restarted the computer, but I still get the same message.

  There is no other printer connected to the PC.

  Hi @marybary,

  I see that you can print and copy, but you can't just sweep your computer running Windows 10. First of all, I would like you to run printing HP and doctor Scan.  Printing HP and doctor Scan is a free utility (tool) that allows to quickly identify and fix common printing, scanning and connectivity problems, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  If you have trouble let me know and I will do everything I can to help. Also, during printing and scanning doctor closes you will see a window of the survey, please complete this survey to help us help you. All feed back is appreciated and valued.

  Thanks, I look forward to hear from you and work toward a solution.

• Problem with my HP PSC 1610 all in one printer of the series which is printing pages in the right order.

  Basically I have the HP PSC 1610 all in one printer. I know not what has happened, but in some way, when I go to print a document of site Web etc, use the printer to print the last page first and keep printing until the 1st real page printed would be changed, which would print on top printed pages.

  My problem is now, it's actually print the path opposite, now it prints the 1st page of first and last last page, which means when I pick up all the printed pages, I then have to sort the page numbers in the correct order.

  Now, I use my printer waste dumps, I print a lot of game documents such as guides etc.. Now if I was just printing pages 1-5, I'd be fine with it, but at this current moment, I was printing guides with more than 50 pages, which really saddens me to have to keep sorting out pages of paper for good order.

  I must say that it does print no pages in a random order, which means like printing, for example, 10 pages, it does not print the page number 6, 2, 5, 8, 3, 10, 1. It is actually printing the pages in the following way, page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10. (When it's over, page 10 is one who is on top of the stack), but I really need to put it so that it will print the pages in the following order, p. 10, 9, 8, 7, 6, 5, 4, 3, 2, 1. (So at the end of printing, the pages of issue 1 is actually on top of the battery), which will allow me to simply staple the pages without the need of haviing re - sort the order of the pages in the correct format.

  I have all my print programs installed as Director of HP and others, so I can change main settings of printers, but I looked through all the preferences main page tabs and I don't find the option to change the printing order of pages.

  I really need help to set my printer settings to print order in the way I need to, but I don't know where the actual parameters are to change this option, and I tried to do an actual search on Google, but I use too many words, search results do not end up giving me instructions that I need He is always giving me other things, more like excavations at random on everything related to my printer and I can't be bothered, working all day to get the good looking, lol. Can someone give me please the instructions I need to set the print order, I need it to be.

  Thanks in advance for all who are able to provide me with assistance.

  Thank you

  Alison Black.

  LIVE FAST, FIGHT HARD CLOSE.
  HUSTLE, LOYALTY, RESPECT

  John Cena (WWE Wrestling Heavyweight Champion)

  Hey

  HP have the customer.

  has attempted to call them abt the question because I'm clearly useless with this technology * beep *.

  but fisgured this is a setting of the printer.

  so if you have the HP SOLUTIONS CENTER's new installed.

  down the down theres a SETTINGS tab click on it.

  go to the PRINTER SETTINGS, once you have clicked on a new dialog box appears.

  the first tab (by following my printer settings ive got a HP PSC 1311) must be ADVANCED

  Click on that, the last option should be OPTIONS AVAILABLE and bloody, WHICH PAGE ORDER WE WERE looking for THAT PERSON DO CAN TELL US ABOUT.