HP PSC 750xi - impression of the error.

Similar Questions

• impression of the error

  I have a printer HP PSC 2350 all-in-one that displays now an error message printing error every time I try to print something.  I have havechecked the updates and installed all of them.  I have copy of PSC 2350 series 7 installed as default printer and it is he who will exit.  I checked the link that lets me know that the printer is ready.  When doing a printhead cleaning proocedure page prints after correctly.  Every time for the first time, to send information to the printer the link of the printer on the default page using the printer offline.  After you change to online and try to resume, nothing changes.

  Hello gewarnerhome,

  Welcome to the Forums of HP Support!

  I understand that the PSC 2350 will print a cleaning, but not a real print job sent from the computer. What is the operating system installed on the computer, Windows or Mac?

  Try to run the print and scan, if you use Windows. It will look in the drivers, software and communication of issues that could be the cause.

  Can't wait to hear back on your part.

• When you print it out paper HP PSC 1507 just repeat the error in the print job

  Hi im on MAx OS X 10.6.4 and I got it all in one HP PSC 1507 printer... I don't know why but I have intralled all the drivers n etc. but it keeps just coming with error in the print job just stay

  Any help would be appreciated

  Thanks George

  Good question.  Although it is listed as being supported under Snow Leopard, there is not another print and scan all drivers.

  We will restore the print system and just use the built-in support for your printer:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• impression of the error - FACSYS FAX printer

  My OS is company Windows7 32 bit, I use FACSYS FAX PRINTER, my windows account was in the normal user group, when I try to print test page (or other document), it displays "Error-printing" in the queue for the printer.  "But I add my account to the Administrators group and transform the account control settings" at the lowest level, the slopes of FACSYS FAX PRINTER OK.

  Because users cannot run administrator privileges, how can I solve this problem?

  Hi Dominic,

  I suggest you refer to the article given below to disable user account control and check if it helps.

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-in/Windows7/turn-user-account-control-on-or-off

  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  See also section below.

  Why can I not print?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  If you have additional questions, feel free to post. We're here to help.

• HP psc 750xi: printer psc 750xi stuck in auto test and ink cart move.

  When you reconnect psc 750xi printer for the office, when it is powered on, psc 750xi printer is stuck in the self test and ink cart move. The printer is recognized by the computer so that it seems to be a problem with the printer. Diagnosis of HP is nothing. Restart the computer and the printer does not change. It worked before I unplugged.

  Hi @JMC30,

  Welcome to the Forums of HP Support!

  I see that your HP PSC 750xi all-in-one printer is stuck in a "free test and ink carriage will not move. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  It seems that there might be a power supply problem or there might be a hardware malfunction. Please, try the following steps to see if we can solve the problem.

  Try the steps in the order presented:

  • Unplug the USB cable.
  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet (do not use a hub or a surge protector). This ensures that the printer is full on and can help this situation.
  • Connect the cable USB in once the printer has finished his departure without errors.

  If the problem persists, follow the steps in this guide: print cartridge error.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP psc 750xi - USB connection. for windows7 professional 32-bit. driver does not work.

  HP psc 750xi - USB connection.  New windows7 professional 32-bit.  I downloaded the proposed driver from hp.com but ' the selected printer is not currently supported by this wizard ".  Help

  Hi flojo9,

  Follow the steps below to load the driver for Win 7.

  1. open devices and printer

  2. click on add a printer

  3. replace the USB port and then click Next

  4. click on Windows Update (step 1)

  5. once the update is complete, you will need to select the PSC 750xi driver in the list on the right (step 2)

  

• PSC 2355xi all-in-one gets the error message on screen that begin with 0 x 88

  I wonder how to fix my printer or if I need a new. I hit the button, but it keeps going to a blue screen with errors on it after cycles. the errors all start with 0 x 88 can someone help me. I think the product number is Q5786A

  Here's a link below which may help you with this problem.

  http://goo.GL/gqbPC

  I would like to know if that was helpful, thanks.

• My Dell all-in-one 962 stopped printing all of a sudden. The error messages are that the computer cannot communicate with the printer.

  My Dell 962 All In One Printer suddenly stopped to print. I get an error message that the computer cannot communicate with the printer. The error message suggests that I unplug and plug back the power plug and the USB cable to the printer and make sure that there are no restrictions of firewall to the printer. I did what was suggested and still no printing. I have resinstaled the printer from the CD software, I got with the computer and also installed the latest driver using the software of the software upgrade wizard.

  and also installed the latest driver by using the Software Update Wizard software.

  That would not have been the best idea... but it is unlikely that the cause of your immediate problem.

  The next thread does not make much sense to me, but it describes a situation similar to what you described and the proposed solution is supposed to have worked.  Try it and see--> http://en.community.dell.com/support-forums/peripherals/f/3528/t/19483019

  I suspect that what really happens is that the driver has become corrupted.  In many cases, simply reinstall the driver is not fix things; you have to clean the old corrupt driver before installing the new.  Thus, it is more likely that the part "Uninstall" the related response is what is helping rather than playing with services... but go ahead and follow these directions, just in case.  In fact, I suggest that you run under first antimalware scanners before following the tips in the above link.

  If I had not found the link above, that's what I would have suggested (whichrequires that you have Windows XP):

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs.

  MalwareBytes AntiMalware

  SUPERAntiSpyware

  Use the free version, not the free trials of "pro" versions  Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.

  Do not run the scans at the same time.  Each scan will take a while.  Start one and go do a non-it chore.  Once the scan is finished, leave the program to deal with anything it finds.

  Once done, you can keep or uninstall programs, or both.  If you keep SAS, I suggest to change its default setting does NOT automatically when Windows starts.

  Uninstall all software from Dell to control panel > Add / Remove programs

  Download Microsoft Fixit 50126 impression: http://go.microsoft.com/?linkid=9662904

  Close all running applications (anything with an icon on the taskbar).

  Run the Fixit routine.  Note: The routine Fixit has two modes, light and complete.  It will run in full mode when you check the box "Reset the spooler to print on values."  This will remove all printers, so if you have any other printer installed, I recommend running the Fixit in full mode.  If you have other printers and you do not (necessarily) want to reinstall them, run the Fixit in light mode (box unchecked).  This may work anyway.  You must restart the computer after you run in full mode; you need not restart after the Chase mode.

  After the Fixit has executed and you have restarted if necessary, make sure that the printer is disconnected from the computer and run the installation software.  You will be asked to connect the printer to a suitable place.  You can use the CD that came with the computer or download the software here (which is relatively hard to find, the claims of the main page of the 962 product support it cannot find the drivers)--> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=R89490

• PSC 1315 + seven 64 bit error scanning

  My setup is a Hp Pavilion with win seven 64-bit (with all the latest updates) and a psc 1315.

  It still works fine with the HP software but now I'm trying to scan a document to a pdf file and I the situation below:

  Windows not in use HP scanner, the scanning starts but it is very slow and when she finishes the software gives the error below.

  I try the following without result:

  -changing the mode to save (tiff, jpg, ecc) and the scanning resolution

  -restart the pc and printer

  -uninstalling and reinstalling the driver from hp and corrective software and more recently

  -performing HP print and scan doctor (everything is ok for him)

  The only way to do a scan now is directly with the windows software.

  Any ideas to solve the problem?

  

  Hello, I read the proposed guide, I'm in the first case, all versions of Flash are updates, 12,0,0,77.
  According to the guide, I have only to reinstall Hp software but I just did.

  I also ran the patch that you set (and rebooted) but nothing is changed.

  Edit:

  I am remembered that some time ago I increased the font size in windows (DPI resolution of 100% to 119%).
  Now, I tried to get back to 100% and now the HP software works well.

  At this point, I changed to new resolution to 119%, and however it works well.

• PSC 750xi with osx 10.7.4

  I visit the in-laws who own a HP psc 750xi all in one unit. I have a MacBook Pro running OSX10.7.4. I had installed the drivers who have been transferred from my previous MBP. I was able to print without problem. However, I can't scan to my computer.

  I went through all the troubleshooting steps, restart, update, restart, remove, repair permissions, etc. Now when I try to install the 'latest' version of HP driver my computer tells me it is no longer supported and will not let me install. Is that all there is? No support for 10.7 at all?

  Thanks for any info, ideas, etc.

  Hello.

  Officially, the product is no longer supported on Mac OS 10.6 and higher.

  However, there are a few 3rd party solutions that can allow you to use the device

  For printing, try the HPIJS 3rd party print drivers supporting the product and is compatible with the operating system:

  http://www.linuxfoundation.org/collaborate/workgroups/OpenPrinting/macosxhpijs

  For scanning, you can try Vuescan, a 3rd party software scan that support your scanner:

  http://www.Hamrick.com/VueScan/hp_psc_750xi.html

  Hope that helps,

  Shlomi

• PSC external - VCSA Gets the invalid credentials

  I recently deployed a PSC external, using the device of VCSA 6.0 U1 recently made public.  Beginning of the PSC external deployment took place without a hitch.  No problem whatsoever.  However, when it comes to then deploy the VCSA with a PSC external, I get the invalid credentials.

  The PSC and VCSA are on the same subnet, and I deploy from my office.  There is no firewall between them and no control of the East-West traffic that could be disturbing the communication.  I can telnet to the PSC to my office on 443.  No internal certs are used, just the standard self-signed certs of VMware.

  I do NOT use the PSC HA config where an F5 (or any other load balancing program) comes into play.  Just a PSC and a device of vCenter (with the same configuration in another data center and related enhanced modes enabled... If I ever get to this point).

  Any ideas?  I think I've exhausted all the Vmkware KB and google this thing to death.

  

  I also see these things in the newspaper of the csd, that correspond with invalid credentials messages in the vcsa newspapers:

  2015-09-15 15:17:51] request [INFO] 1151 - [sso: QyUT-UDyA-Okks-RXbt] .validate: receipt.

  [2015-09-15 15:18:12] [ERRO] Ask 1151 - [sso: QyUT-UDyA-Okks-RXbt] .validate: ERROR_GET_DOMAIN_NAME error status: failure to the UNIQUE application of '005F2F80' authentication domain: 58

  [2015-09-15 15:18:19] [INFO] Ask 1153 - [session: session] .ping: receipt.

  [2015-09-15 15:18:49] [INFO] Ask 1154 - [session: session] .ping: receipt.

  [2015-09-15 15:19:19] [INFO] Ask 1155 - [session: session] .ping: receipt.

  [2015-09-15 15:19:47] [INFO] Ask 1157 - [sso: QyUT-UDyA-Okks-RXbt] .validate: receipt.

  [2015-09-15 15:20:08] [ERRO] Ask 1157 - [sso: QyUT-UDyA-Okks-RXbt] .validate: ERROR_GET_DOMAIN_NAME error status: failure to the UNIQUE application of '005F2D18' authentication domain: 58

  [2015-09-15 15:20:08] [INFO] Ask 1158 - [session: session] .ping: receipt.

  [2015-09-15 15:20:19] [INFO] Ask 1160 - [session: session] .ping: receipt.

  [2015-09-15 15:20:49] [INFO] Ask 1161 - [session: session] .ping: receipt.

  [2015-09-15 15:21:19] [INFO] Ask 1162 - [session: session] .ping: receipt.

  [2015-09-15 15:21:49] [INFO] Ask 1163 - [session: session] .ping: receipt.

  [2015-09-15 15:22:11] [INFO] Ask 1165 - [sso: QyUT-UDyA-Okks-RXbt] .validate: receipt.

  [2015-09-15 15:22:32] [ERRO] Ask 1165 - [sso: QyUT-UDyA-Okks-RXbt] .validate: ERROR_GET_DOMAIN_NAME error status: failure to the UNIQUE application of '005F2D70' authentication domain: 58

  [2015-09-15 15:22:32] [INFO] Ask 1166 - [session: session] .ping: receipt.

  [2015-09-15 15:22:49] [INFO] Ask 1168 - [session: session] .ping: receipt.

  [2015-09-15 15:23:19] [INFO] Ask 1170 - [session: session] .ping: receipt.

  [2015-09-15 15:23:44] [INFO] Ask 1173 - [sso: QyUT-UDyA-Okks-RXbt] .validate: receipt.

  While this may be caused by an incompatibility of certificate, in my case, it was a problem with the office network.  While port 443 is open to the ESXi host and the PSC external UDP 123 was not, and did not observe in any newspaper, it seems to have been the problem.  NTP on the PSC itself worked fine.

  As a test, I tried to deploy VCSA w/year embedded PSC.  This deployment also failed NTP citing it as a problem.  Changing the setting to synchronize with the host allowed FRO deployment to continue.  If you have a similar problem with invalid credentials, this can be a good test for you as well to make sure that UDP 123 is accessible from your desktop.  I don't know why it should be, but I can only assume that the place from which you are running the installation acts as a proxy for communication of all kinds.

  So in addition to making sure DNS lookup front and rear work correctly, verify the port 443 to the PSC external target host and if these things are good, try to deploy a device VCSA with the PSC incorporated using NTP for time synchronization.  If this fails, you may need to change your deployment location (unless it's easy for you to get this open port).

  Simply, I built a Windows VM base on the same subnet as my other management/infra peripheral, pushed the .iso from a store of data and mounted on this VM and connected to install it there.  Went off without a hitch.

• E-mail button will not send, get the error pop up

  I tried to add a new button to a pdf file that I had created several months ago.  I was able to raise an "impression" on the PDF button and it works fine.  I googled how to add a button so that we can hit him and send the pdf file to a fixed address.  I followed all the steps and when I hit the button I get an error message stating "at least one required field is empty. Please fill the required fields (highlighted before you continue. "I've not highlighted of fields, I made the fields that have been marked are not required, but it still gives this error message.  What are my options or patches?

  
  

  I was finally able to run. I have recreated the original shape and deleted all the buttons or text boxes and more.

• Adobe creative cloud installation does not work. Get the error code 207. All solutions?

  I recently got the cloud creative adobe and so far I'm not impressed with her. The adobe installer will not download the creative application of cloud. It keeps freezing for a minute and gives me this error message.

  And if you tell me that if I am on a managed network and I need to be wired connection to make it work, I am. I use a wired connection and my internet works perfectly. And I also tried disabling my firewall, antivirus software, basically everything what is perhaps perform the server. Still does not work... I tried everything and nothing works.

  Got it to work, it seems that it is bitdefender, my anti virus program sends me questions. However, I disable the antivirus program trying to get the installer to work and I still get the error. So I just straight up to uninstall bitdefender on my pc and it seems to work perfectly. Hope this helps anyone who has the same problem I did.

  See you soon!

• How to print after the Error Msg: cannot convert the postscript file

  "Maverick", we installed our MacBook Pro and our printer is a HP 8600.  We have failed to get our Adobe Acrobat Professional 8 to print our PDF files.  Instead, we got the error msg: impression: cannot convert the postscript file.  We have used this application for years without any problem.  How do we solve this problem so that our request will BE "convert postscript file" or do we not have to spend several hundred dollars to upgrade?

  I think that we have solved the problem.  Instead of looking for the solution via Adobe, we went to our info from the printer online, which was the HP OfficeJet 8600.  We found the printer drivers special for our system of operating newly installed Maverick for our MacBook Pro.  After having downloaded and installed the new drivers by fashion, we tested print a pdf document, and it was printed without any problems.

• ODI: how to trigger the error return prior to loading in Essbase?

  Hi John... If you read my post, I want to say that you impress me! really, thank you for your blog.
  
  Today, my problem is:
  -J' received a poor quality of extract of ERP data file
  -J' saw the reference table (Source == > target)
  -> > How to trigger the error prior to loading in Essbase!
  
  My idea is this, (first of all, I don't know if it's a good thing, and also I have the problem to do in ODI!)
  -Step 1: make the JOIN between data.txt and cross-reference Table == > create a DATA_STEP1 table in the ODISTAGING schema (columns of DATA_STEP1 are adding data.txt columns than the table of cross references (... there more than 20 columns in my case))
  -Step 2: Control if there is no NULL value in the target column (NULL means that the data.txt file contains the value that are not defined in my Table of cross references) by using the filter (filter = Target_Account IS NULL or Target_Entity IS NULL or...)
  The result of this interface is sent to the queue of reject.txt - if reject.txt file is not empty, then a mail is sent to the administrator
  -Step 3: do the opposite: filter NOT (Target_Account IS NULL or Target_Entity IS NULL...) == > the result is sent in the DATA_STEP3 Table
  -Step 4: run correctly mapping: source: DATA_STEP3 (own and verified data!) with reference Tables and send data into Essbase - NORMALLY, it is not rejected record!
  
  My main problem is: what is the right IKM to send data in the DATA_STEP3 Table, which are the Oracle Table in my scheme of ODISTAGING or DATA_STEP1! I tone with Oracle IKM incremental update but I get error and in fact I don't need an update (which is a time trust), I just need an insert!
  "I'm just lookiing for a ' IKM SQL for Oracle...
  concerning
  Xavier

  Create a sequence in oracle, you use the sequence in the mapping of your target.

  < %="odiRef.getObjectName" ("l",="">","","< d="" ou="" w="">") %>.nextval"

  so, for example, it might be

  <%=odiRef.getObjectName("L","DATASEQUENCE","DATALOGICALSCHEMA","D")%>.nextval

  Make sure that you run the mapping target or intermediary.

  See you soon

  John
  http://John-Goodwin.blogspot.com/