PSC 1315 + seven 64 bit error scanning

Similar Questions

• HP PSC 1315 all-in-one: error 1632: Temp folder full or inaccessible, when you try to install HP PSC 1315 all in one

  I get the following installation error when you try to install the HP PSC 1315 all in one.

  [code 1632. The Temp folder is on a drive that is full or inaccessible.

  Free space on the drive or verify that you have permission write to the Temp folder.]

  Hi @tasos251,

  I understand that you're seen a message on your temp folder is full, I'd like to help. Please follow the steps below to clean the computer and install the software;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose to save money, save it on the desktop > AIO_CDB_NonNet_Full_Win_WW_140_408 - 4.exe
  4. After that the downloaded software and extracted, open the temp folder once again, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have annon HP computer run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• Error printer HP PSC 1315

  I recently started work on a Dell Windows 7 computer, and it seems that there is some kind of problem (error 0X000000c1) with the printer drivers for the HP PSC 1315 all-in-one that occurred after the installation of MS Office 2010.  The scanner still works fine, so I know this isn't a problem with the USB connection to the computer, but whenever I try to print a test page, this is the error that is displayed.  I tried to reinstall the most recent drivers and nothing seems to work, nor was I able to find anything online for this error.  Any help would be greatly appreciated.

  Thank you Zig, for your very useful and informative answer.  I was actually able to understand it on my own, but only for the benefit of other readers, I'll post below how I did it.

  -Open the menu START, right-click on "Computer" and select 'manage '.
  -Expand the "Services and Applications" tab, select "Services".
  -Scroll down to "Print spooler", then double-click on it to open properties of spooler.
  -Open the "Dependencies" tab to see what specific components that need to be enabled for printer to work properly.
  -Locate each of these components in Services' and either activate or restart the service.
  -Close the window, restart the computer and voila, the printer worked once more.

• PSC 1315 all-in-one: paper jam

  My wife was going to print something from our computer and the printer took several leaves inside. It jammed so she shot just leaves in the front now, our computer said there is a paper jam and will not print we. I went through all the steps of the Glade, restarting, etc. that I've read in hp and others who shared their problems. It copies and analyzes very well. The computer tells me that there is a jam. Could have broke us something by pulling the paper to the front?

  Thank you

  Oldfud

  Hi @oldfud

  Welcome to the Forums of HP's Support. I understand your computer continues to tell you that there is a paper jam. I would like to help.

  It is possible that something has been damaged. Although it could be a "hiccup" with the software on the computer. You can try running the HP Print and Scan Doctor. This will check the software. If the problem persists, try this document a view of the "Paper jam" error HP PSC 1315, 1315v, 1315xi, s and 1318 1315 all-in - One Printer Series.

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

• HP PSC 1315 all-in-One use scanner without ink cartridges

  Hello

  Is it possible to use HP PSC 1315 scanner without ink cartridges? A light ink control is brinking and it won't scan.

  Sorry, you will not be able to scan without changing the cartridge.

  The printer is not working with the lights flashing and an error state.

  So, you will need to have LITTLE ink cartridges to scan.

• Is it possible to set up in windows 7 for my printer HP psc 1315 all in one...?

  .. .or is not possible, and it is best to think about to buy a new printer!

  I was wasting far too much time trying to set up many "good drivers" for this device and will never work ok

  My question is simple: "there is a device that works well with HP psc 1315 all-in-one Windows seven?

  Thanks in advance ;-)

  Peter

  IF this is your printer/scanner - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=374568#N223 then there are drivers W7 32 and 64 bit available for this purpose.

  Everything on the PC concerned with your HP printer uninstall, restart the PC, then download and use the appropriate driver (W7 - 32 or 64 bit depending upon need) and see what happens then.

  Whatever it is, as its apparently supported, you're probably better asking HP if you did not already.

• Cannot print/connection of Windows 7 for shared PSC 1315 on the XP Machine

  I have a HP PSC 1315, connected to a computer running Windows XP (32 bit).  This printer is shared.  I can access it from other XP machines on my home network.  I can't access it from my computer Windows 7 (64-bit).  I can see the printer is shared on the computer, but when I double click on it, I get the following error:

  "Windows can't find a driver for hp PSC 1310 series on the network."  To locate one manually, click on OK.  Otherwise, click Cancel and consult your network administrator or the printer manufacturer's Web site. »

  Then I tried to download the driver Windows 7 (64 bit) of HP and installed on my Windows 7 machine:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&LC=en&DLC=en&cc=CA&...

  At the end of the installation, it asks to connect the printer to the computer via USB.  Because I'm not physically the printer connected to the Windows 7 computer, I check the box that says I can't login now and go forward at the end.

  Then I tried to connect to the printer and I get the same error.  I try to locate a driver manually.  I point to c:\windows\inf\ without success (I am * if * the driver info might settle there, but I don't know what the name of .inf).  Windows says that it cannot find an appropriate driver.  Maybe I should be looking elsewhere?

  I found some troubleshooters on the HP website, but it does not give "shared printer on a network" as one of the schemes to solve connection problems.

  I'm a little confused on this one.  Hoping that there will be something simple, I missed.

  Thank you!

  Hello

  Kahless wrote:

  I have a HP PSC 1315, connected to a computer running Windows XP (32 bit).  This printer is shared.  I can access it from other XP machines on my home network.  I can't access it from my computer Windows 7 (64-bit).  I can see the printer is shared on the computer, but when I double click on it, I get the following error:

  "Windows can't find a driver for hp PSC 1310 series on the network."  To locate one manually, click on OK.  Otherwise, click Cancel and consult your network administrator or the printer manufacturer's Web site. »

  Then I tried to download the driver Windows 7 (64 bit) of HP and installed on my Windows 7 machine:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&LC=en&DLC=en&cc=CA&OS=4063&product=374568&sw_lang=

  At the end of the installation, it asks to connect the printer to the computer via USB.  Because I'm not physically the printer connected to the Windows 7 computer, I check the box that says I can't login now and go forward at the end.

  Then I tried to connect to the printer and I get the same error.  I try to locate a driver manually.  I point to c:\windows\inf\ without success (I am * if * the driver info might settle there, but I don't know what the name of .inf).  Windows says that it cannot find an appropriate driver.  Maybe I should be looking elsewhere?

  I found some troubleshooters on the HP website, but it does not give "shared printer on a network" as one of the schemes to solve connection problems.

  I'm a little confused on this one.  Hoping that there will be something simple, I missed.

  Thank you!

  Here's a good explanation of how to share a printer from an XP PC to Windows 7 PC on a network home.  It should work since Windows 7 (64-bit) PC can see the partition Windows XP 32-bit.  What you missed was the type of port to use for the network connection.

  Best regards
  ERICO

• Printer HP PSC 1315 and Windows 7 drivers

  Hi guys!

  I can't find Windows 7 64-bit or 32-bit (I use Windows 7 64-bit) drivers for HP PSC 1315 on this page and if I installed the driver more former example Vista 32 or 64 bit installation wizzard could not allowed me I don't know what I can do with that. I need to use this print device. I know that this printer is very old, but I don't have any plan to buy a new one. Now if you'll excuse me I have not good English language skills.

  Message edited by coper471 on 08/19/2009 23:50
  Message edited by coper471 on 08/19/2009 23:51

  This thread has been locked, for more information on HPPIW, please refer to the following support document:

  http://support.HP.com/us-en/document/c02681060

  HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

  To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

• printers HP psc 1315 does not work with windows 7

  BOTTOM of my son recently gave me an Acer computer

  PROBLEM I can't get my printer to work with this computer... I changed the default printer (HP Laser Jet P2050 Series PCL 6) at the mine and get a troubleshooting message... have also a red light flashing next to change cartridge and one beside copies.

  Hello

  ·         What happens when you try to print?

  ·         What is the code or an exact error message you get?

  ·         What operating system is installed on the computer?

  Method 1:

  Run the fixit provided in the link below and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:

  I suggest that you install the latest driver for the printer and check if that helps:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=374568

  Method 3:

  You can also uninstall the printer and then install and as a default and check if it solves the problem:

  Add or remove a printer

  Change your default printer

  Method 4:

  You can also check out the link below, because it addresses similar issues:

  http://h30434.www3.HP.com/T5/other-printing-questions/sudden-print-cartridge-error-for-PSC-1315-unsolvable/TD-p/277223

• PSC 1315 all-in-one can be used as a fax machine?

  I thought I had faxed before 1315, ha ve in hook new computer and now it seems that I can't send fax, it is even possible to use while a psc 1315 as a fax?

  Well, no, it isn't. You can see the specs here PSC 1315 specifications. If you had faxed to her, you would have a phone line connected on it.  Maybe you tried an e - fax service and the printer to scan the document.

• PSC 1315 - how to stop test page

  I have a HP PSC 1315 all-in-one printer (no suffix). I keep off when not in use. Whenever I turn it on, it displays a test page.

  How can I disable this feature? I have not found any help about it on the HP website.

  Thank you very much

  Markbo wrote:

  I have a HP PSC 1315 all-in-one printer (no suffix). I keep off when not in use. Whenever I turn it on, it displays a test page.

  How can I disable this feature? I have not found any help about it on the HP website.

  The page is printing is an alignment page printed after a cartrdige is changed.  You must complete the alignment process of loading the page on the scanner and pressing the scan button as shown in your user manual, page 33.

• How to stop a test print page whenever the HP psc 1315 printer is turned on?

  Everytime I turn on my HP PSC 1315 printer automatically prints a test page.  How can I turn this off?  At the same time, I was able to print or copy without a first printing test page.

  I also have Windows 7 ultimate installed with a HP PSC 1310.

  He kept printing an alignment at each start page, so I downloaded and installed the installer of HP PSC 1315 all in one series printer:

  Link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&cc=us&DLC=en&LC=en&OS=4063&product=374568&sw_lang=

  This download works for the 1300 series.

  I ran the printer align cartridge utility, page printed, put in the scanner and used the button "scan" as the 'OK' button and it solved the problem.

  Thanks for the tip of the "scan" button

• HP PSC 1315 does not work on windows 7

  I recently got a new PC with windows 7... I downloaded the driver for my printer (HP PSC 1315) of the HP site, but my PC does not answer with my printer.

  In the HP Solution Center it recognises my printer and shows that it is plugged in and on, but in "Devices and printers" represents a yellow mark at the printer.

  I tried everything, uninstall and re-setup, manual of rights even tried admin identify processes.

  Hello

  Please pass below for the info

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=hardware&p=HP%20PSC%201315%20All-in-one%20Printer&v=HP&UID=Q5765AABA&pf=0&PI=0&s=HP%20PSC%201315&OS=64-bit please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• HP psc 1315 is compatible with Vista?

  Hi, I have an old printer, HP PSC 1315, I used it with my XP OS. I just want to know if I could install it too with an OS like Vista. TIA.

  Hello

  I suggest you go to this web page for some great information that will help.

  Good luck and come back to mark this as an accepted solution if it works.

  Best regards

  Park

• HP PSC 1315 Officejet series: the officejet HP PSC 1315 software installation disc does not start

  I'm trying to install the software for a HP PSC 1315 all-in-one officejet on an XP pc. When I put the disc in the CD/DVD drive, that it will not start. When I click on SETUP. EXE it does not start. Tried the drive in another laptop (Win10) and office (Win10) and the drive would go. I put the diskettes for installation of two other programs in the XP and two ran. I downloaded the Setup file of the Support of HP and he wouldn't either. Anyone know what is happening here?

  Hi @jonessbl,

  That will be better answered by the @Dellpeople.

  Thank you.