HP SIM with ESX 3.5 configuration

Similar Questions

• With ESX and ESXi NAS storage configuration

  Hello

  Someone at - it a link to all the useful documents for the implementation of NAS with ESX storage.

  Thanks in advance.

  Find the link below

  http://www.Cognizant.com/HTML/content/bluepapers/vmware_esx_wp.PDF

  Concerning

  Anand

  While it is true the points

• SRIOV support for FreeBSD 8.4/10.1 VM with ESX 6?

  Hello experts,

  Question

  Would like to know if the SRIOV VF drivers are supported on FreeBSD 8.4/10.1 VM with ESX 6?

  Configuration information:

  In my setup, I have Intel 82599 NIC with VF interfaces configured and assigned to a virtual 10.1 FreeBSD computer.

  But claim fails with the following error message:

  ix0: Intel (r) PRO/10GbE Virtual Function Network Driver, Version - 1.1.4 > mem 0xebaf8000-0xebafbfff, 0xebafc000-0xebafffff to the 0,0 on pci3 device

  ix0: MSIX config error

  ix0: failure of PCI resource allocation

  device_attach: ix0 attach returned 6

  pcib4: < ACPI PCI - PCI bridge > camera 21.1 on pci0

  To probe further, pci_alloc_msix() call returns-1, which is unexpected.

  The PF IGB driver on esx 5.5 is 3.21.5

  The ESX version is: ESXi 5.5.0 (Build 1331820)

  If I have a Ubuntu VM affected with a VF of the same physical NETWORK adapter interface, he claims as expected.

  If I live of e/s configured for the Intel 82599 NIC, the 10.1 FreeBSD VM calls for the interface as expected

  Guidance on the support above on ESX 6.0 help.

  Kind regards

  Nirmal

  We do not have a supported guest in 6.0 OS documentation. assuming that since the previous version is not one supported. You can provide your comments to article KB KB VMware: support of the only guest operating system Root i/o Virtualization (SR - IOV).

• Cluster with ESX 3 and HA

  If I have a Cluster with ESX 3 and if one of them, I want to know the process of HA, on which ESX my VM would be transferred.

  We do not have DRS

  I'm looking in config HA, and I don't see the configuration option.

  Thank you

  .. My VM would be transferred on which ESX?

  On others, depending on the resources available to them.

  All I know is there nothing HA settings, where you can specify this. You could set up - which IMO would not have made much sense - the affinity of host for each virtual computer work only on two hosts. You could also spend a host as a failover host.

  I suggest that read you http://www.yellow-bricks.com/vmware-high-availability-deepdiv/ for more information on HA.

  André

• 64-bit guest with ESX 4.0 operating system installation is not possible

  Hello guys,.

  I just installed two servers blade full-height M710 Dell with ESX 4.0.

  They definetely support 64-bit, otherwise I think that ESX 4.0 could not run on that host.

  Well, the installation worked fine, they are also connected to our vCenter charges upgraded to 4.

  I tried to install the virtual first with W2K8 R2 64 bit guest OS machine. But offers installing only the x 86 install wizard.

  VT (Virtualization Technology) is enabled in the BIOS.

  What wrong with my configuration or missing?

  Thanks for any response.

  Best regards

  Timo

  Try to select just 2008 R1 64-bit, not R2, it should work very well.

  ---

  If you have found any of my reviews useful please consider giving points to 'Correct' or 'useful '. Thank you!!!

  www.beyondvm.com

• I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  Sorry, but you can't activate an iPhone without a SIM card installed. It is simply not possible to do.

• Get WVC80N to work with my crazy network configuration

  Hi all

  I come here with great hope and told me that I wouldn't be disappointed.

  I have a small setup hardware multi (Airport express to Apple, Linksyss single router befsr41 wired, ports linksys switch 8).

  So here's my setup as a Time Warner cable modem > BEFSR41 > Apple Airport Express the BEFSR41 is also used so I can reach my TV and decoder via the switch.

  My airport express is used to connect my wireless laptop and I'm talking about the infamous WVC80N to Airport express.

  My problem is that whenever I go through the guided installation, he finds the wireless but does not connect to configure the TZO account I (paid account) in the end.

  I tried to ask the TZO people and they say that I need to talk to apple to port forwarding... I can't seem to find how carry forward in the Airport express.

  To set up the camera I plugged on the switch that is connected to the BEFSR41.

  All in all the Airport express receives its ip address of BEFSR41 (each single device is BEFSR41 ip, I think)

  So, how can I get the camera to talk to airport express...

  If this configuration is confusing you I ask for apology, and I'd better explain.

  Thanks in advance.

  You want to reconfigure the WVC80N so connect the camera with the BEFSR41 and open the BEFSR41 configuration page and click on the status tab, there you will be able to see a sub-tab "Local network"click on that and then click on the button"client DHCP table" here in this chart you will be able to see the IP address of the camera...

  Then open the camera with this IP address configuration page... Do the settings on the camera as on the Airport express wireless and static IP address according to the BFSR41...

  

  Open the page of configuration of the camera again with the new IP address and then provide TZO account information and click "update now"... In addition to allowing the port number 1025...

  

  After all of these settings, you must open the same port on the BEFSR41 router. You must open the port on the BEFSR41, as is the main router...

  

  After making these settings you can use the camera remotely with the TZO account...

  Try these settings certainly it will help you...

• The FVO with ESX 3.0 files

  Hi all

  First of all, sorry if I didn't post this message on the right forum, but I did not know where to write.

  I have an ESX 3.0 with VM important about this. My goal is to migrate those virtual machines on a vCenter 4.1 with ESX 4.1 in order to upgrade this last ESX with a newer version. The problem is that I can't find on VMware Infrastructure 2.0 how to import OVF my VMs files. I can't do: file > export > export lists or maps to export... Is it possible to import OVF file with these versions of ESX and VMware Infrastructure?

  If not, what solution do I?

  Thank you very much.

  
  
  There is no ignorance, there is just a lack of experience

  Hi synchronized,

  The simplest solution would be to use VMware Converter to move you your old ESX to the new VM.

  Good luck!

  Concerning

  Franck

• Is it possible to host ESX 3.5 VMotion with ESX 4 online?

  VMware newbie

  Is it possible to host ESX 3.5 VMotion with ESX 4 online?

  It is possible.

  And it is necessary to do a guest upgrade without interruption of service.

  André

• Anyone running HP DL 585 G1 with ESX 4.0?

  Anyone running HP DL 585 G1 with ESX 4.0?

  Yes I know that it is not taken in charge in the HCL. I need for the work of Storage VMotion. Downtime will not accept being the customer.

  If I remember correctly, this model has a processor specification that would not be supported in the latest version of VMware ESX (in this case, ESX 4.0)

  concerning

  Jose Ruelas B

  http://aservir.WordPress.com

• VM with ESX hosts time synchronization

  I have an environment where we hate some vm value Time Sync vm with ESX hosts and on the other not.

  need to write a script to set the synchronization time vm with ESX Yes on all virtual machine hosts in a given cluster

  If you only want the name of the guests, you can add a Select cmdlet at the end

  $vms = Get-Vm | where {(Get-View -Id $_.Id).Config.Tools.SyncTimeWithHost -eq $true} | Select Name
  

• vSphere 4 perl SDK with ESX 3.5?

  I start a project with the ESX 3.5, although we can upgrade to vsphere in a near future. Is it safe to use perl vsphere SDK with ESX 3.5 for now, or I'm better with the 1.6 VIPerl sdk until I can upgrade to vsphere 4?

  Thank you

  SDK for Perl 4.0 will work against ESX 3.5. There is a compatibility chart in the Installation Guide.

• X 1 PCI-E 1000 Mbps cards exist which will work with ESX 3.5

  Hello

  I currently have two ethernet Intel Pro GT cards, which work well in ESX 3.5. I wonder if you do PCI-E x 1 1000 Mbps cards available which will work with ESX 3.5? All my PCI slots regular are met, namely.

  Thank you

  Hi, take a look at the Intel Pro1000PT series, the single nic will work on a x 1 bus whilest the dual nic and quad variants will run on a 4 x / 8 x / bus 16 x and are on the HCL, just search under the e/s intel and its high - the only weird is that the HCL it graphic adapter States PT , Dual PT and PT quad, but when you go into the details for the PT adapter (which you'd think was the only port), it says its got 2 ports...

  Thank you

  Neil

• MD3000i configuration with ESX 4

  I configured the ESX 4 server, I configured the IP for storage MD3000i (management 2 port & iSCSI 4 port), port all attached to a giga bit switch & I have installed "drive modular storage management client" on my laptop rolled in the same IP subnet & attached to the same switch.

  Now when I try to detect the host (host ESX) of modular machine, it is not able to find any host, I wanted to do it because until unless I get a host machine I can't map a virtual drive to the ESX host...

  Please help me on this issue...

  Note: Side ESX, I configured everythging, like vmkernel, etc...

  First of all, you need to work on your ESX: create the vmkernel for iSCSI (one for each network) interfaces, enable iSCSI on ESX firewall, turn it on and get into the target.

  At this point, you can create the configuration of the host and the virtual disk link.

  See also:

  http://www.Dell.com/downloads/global/solutions/md3000i_esx_deploy_guide.PDF

  André

• HP DL380p G8 with ESX 4.0 and 5.0 of error during installation

  Hello

  I need it please your help to the next question.

  I want to install ESX 4.0 or 5.0 on HP DL380p Gen8 ESX, installation of ESX I received the following error message:

  32.networking - drivers failed to run script and installation cannot continue

  What can be the problem? is it the driver problem if yes how can we add the ESX driver during installation.

  your quick replay is very much appreciated.

  Thanks in advance.

  Default PowerShell restricted running unsigned scripts. To allow them to perform, you must set the ExecutionPolicy setting properly. Depending on your system configuration, you may need to do that with PowerCLI start with "Run as Administrator" see set signature Remote Support properties

  For more information on how to use the Image Generator please read Using vSphere ESXi Image Builder CLI. There are also many available exapmles when you do an Internet search.

  André