HP Laserjet P1102W: I chose the eco mode (less ink) for a print job. Now, default printer for this. How to cancel?

Similar Questions

• Unable to print from other programs like Gimp and the error is "your photos cannot be printed because this error occurred.

  Original title: I can print from other programs such as Gimp, just not windows live photo

  When I first installed Windows Live I could print very well but now I have the same box that says "your photos cannot be printed because this error occurred.  I looked in the forums and found several answers, but none that have the situation corrected.

  Hello

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you can not to print from the program Gimp and the error is 'your photos cannot be printed because this error occurred'. Please let me know if this isn't the problem that you are experiencing.

  I understand the inconvenience caused to you. I'll help you solve the problem!

  Before troubleshooting, I have little information on the issue.

  1. what type of image file?

  2 are you facing this problem with specific program or all programs?

  3. did you of recent changes to the computer before this problem?

  4. What is the serial number and model of the printer?

  Note (1): If you are faced with the question with all programs, try the methods you haven't tried earlier and then check after each method:

  Method 1: Print a test page:

  http://Windows.Microsoft.com/en-CA/Windows7/print-a-test-page

  Method 2: Why can I not print?

  http://Windows.Microsoft.com/en-CA/Windows7/why-cant-I-print

  Note 2: If the problem is with the specific program (Gimp), I suggest you contact the manufacturer of the program.

  http://www.GIMP.org/webmasters.html

  Reference link:

  Picture printing: frequently asked questions: http://Windows.Microsoft.com/en-us/Windows7/picture-printing-frequently-asked-questions

  If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further!

  It will be useful.

• Can not activate win 8 error "the key provided is not for this edition of windows, use either windows 8 setup or enter an activation key for windows 8.

  OT: Cannot activate win 8 on my laptop due to the change of hard disk.

  Hi all

  I have a Samsung np550p5c-s05in and it came installed with 64-bit Windows 8, later, the hard drive developed a few problems and as I had guaranteed him, they were replaced by a new, but this one came with a victory 8 32-bit that is not enabled. Now, I got the product key of victory last 8 I had so I tried using them to activate, but an error came that said something like

  "The key provided is not for this edition of windows,

  Use the installer of windows 8 or enter an activation key 8 windows. »

  So it was logical that the key I had was for a 64-bit win 8, so I installed win 8 64 bits of an image file and then I repeated the same procedure to enter the key and the same error came once again.

  I would ask so you people to please help me with this, because I have no idea whatsoever what to do next.

  Thanks in advance,

  SamizZy

  All laptops with preinstalled Windows 8.1 are OEM version of the product that are modified by computer makers. You cannot activate a product of retail of Windows 8 with an OEM key.

  When get you the computer from the computer. I suggest that you create a recovery disk to help you in the future.

  http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive

• When you try to import photos, I get an error that says that the preview is not available for this file.

  When you try to import photos I get an error that says: Preview is not available for this file. Then when I try to download these files, a gray box returns for each photo with the name of the file, and this error message -Preview is not available for this file but no picture. The files are JPEG files. I use Lightroom CC help?

  Some additional information. I received these photos of my granddaughter of my son with Dropbox. I checked the files under properties and found that they were listed as "some blocked properties" so I checked the box to 'unlock' and click on apply. The blocked message went away. Then, I took the original photos out of the folder of file they were in. I went back to LR and made sure those grey boxes with the Preview is not available for this file was missing. Then I went to the new files with the status of unlock in a new folder and tried to import into LR... same thing happens again! UGH

  Hi rsobieski,

  Could you please copy the images of Dropbox in a new folder on the computer/pictures folder.

  Also, then try again to import images into Lightroom and also please check if you have read and write permissions on the images.

  Kind regards

  Tanuj

• My Vaio has a sound that seems to come from the fan, is a solution for this?

  My Vaio has a sound that seems to come from the fan, is a solution for this?

  
  

• I pay 9.99 usd per month for the Plan of creative photography Cloud.  I use mainly LR... can I download / use the most powerful Photo Store for this award of contract also?

  I pay 9.99 usd per month for the Plan of creative photography Cloud.  I use mainly LR... can I download / use the most powerful Photo Store for this award of contract also?

  Ask for help here.

  Yes, creative photography plan cloud includes photoshop & Lightroom.

  Concerning

  Baudier

• LaserJet P1102w: Address in the wrong place on the envelope of 6 3/4 with LaserJet P1102W

  When I print 6 3/4 envelopes in Word since my Windows 7 64-bit system to a new LaserJet P1102w address is correctly centered from top to bottom, but it is so far to the left half of the address is cut off from the envelope. The same settings printed correctly with my old HP LaserJet 1022nw printer.  Can HPW I fix?

  Bear with me a moment... My printer is a different model than yours, but here's what I discovered. Firstly a bit of background. My old HP B209 printer would print envelopes card without problem, but when I started using my printer HP Photosmart 6520, it would just spit in the envelope without printing the addresses, even if I chose an envelope of greeting card in the printer properties. HP could not solve my problem and other sources on the HP Forum said that HP just made a blunder in designing is not the printer to print envelopes of greeting cards.

  Finally after a year or two, a member of the HP Forum suggested I have try select the C5 envelope in printer properties and that is, the envelope printed however; the address printed back ok but send it to the address has been out of the envelope with only a partial address display. For some unknown reason, I selected 'options' on the printout of the envelope (a feature I've ever used) and learned that I could work out where the return address and send it to the address were located on the page. When you click the 'Options' button you can adjust the situation where each address appears on the page. You change the 'top' and 'left' numbers you can watch address icons (which appear as straight lines) are moving on the envelope. Pass each address around there where you want it and then try to print the envelope. If each address is too right or too far left or should be raised or lowered just play with the settings until the addresses where you want. Write your settings on a piece of paper and stick it on the side of your computer tower or someother convenient place so you can store these settings in the future.

  Now... don't forget to change the envelope size to the default envelope size you are using in general. I always use a #10 envelope business for my personal correspondence. Otherwise, the next time you go to print a standard envelope (what size is that you are using) the parameters will always be in place for the envelope of 6 3/4 that you use and addresses does not print correctly. You will not need to change the settings of your default envelope size because it will always go to the value by default (unless you change it) hope this solution works for you.

• HP LaserJet P1102w: Cannot install the driver or the printer

  I had this problem on my old PC as well.

  I plugged my printer via the USB port (a port I don't know for sure works) and nothing pops up to auto install or whatever it is. I thoguth that was weird, but I also thought that the pilot would be on the printer, so let's just go to the section of the Control Panel printer. I did it, and the printer is there, but he says that he has no driver. I tried the option to find driver, but that did not work.

  I thought maybe I just need to download it then. Came on the HP site, downloaded the installer for my printer and started running it. He gets to the part where I need my printer and plug it into the USB port. I did, but it will not register in the installation software I did. The USB port works, as I have the ability to eject the printer in the taskbar, but I can not install anything.

  Hello @Kitanya,

  Welcome to the Forums of HP Support!
  
  I understand that you encounter USB connectivity problems during the installation of your HP LaserJet Pro P1102w printer on your computer Windows 8.1. I would like to help you to solve this problem today. Now I see you tried first to install your HP Laserjet Printer simply by plugging the USB cable in order to run the HP Smart Install process. HP Smart Install is the installation program built into your printers of programming. By plugging the USB cable, if own you a CD player on your computer, the printer is supposed to be recognized as a software CD and an installation must be started. However, is there is no problem with the CD drive on the computer or the printer is blocked to be recognized correctly it can cause the HP Smart Install feature does not work correctly. That being said, when you tried to run the installation with the downloaded driver package and were prompted to plug in the USB cable, then because the printer has already been connected "prematurely" with the USB cable already recognized computer connection. Therefore, the computer won't recognize the P1102w related 'recently' if he thinks already that is.

  With that all being said, I will guide you in the faster and easier way to solve this problem. Please follow the steps below.

  Step 1: Uninstall the drivers:

  Even if the installation has not completed successfully a part of the software and drivers can have made their way onto your computer. It is important that we have a nice clean slate to work with, so please follow the steps to remove all traces of your computer printer.

  1. Unplug your USB cable from your printer HP Laserjet, as well as your computer
  2. Open the screen Start by clicking the Windows button on the lower left corner of your computer screen or by selecting the Windows key bottom left of your keyboard to the right of the Ctrl key
  3. In the start screen, type programs and features. Click on programs and features to run
  4. Scroll through the list of population programmes and to locate the HP Laserjet.
  5. Click the HP Laserjet Printer and select uninstall
  6. Follow the instructions on the screen to complete the uninstallation.

  Once the uninstall is complete, proceed to the next step.

  Step 2: Remove temporary files:

  1. Open the screen Start by clicking the Windows button on the lower left corner of your computer screen or by selecting the Windows key bottom left of your keyboard to the right of the Ctrl key
  2. In the start screen, type run. Click on Run to launch the run dialogue box.
  3. In the run box, type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder, once it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Reinstall the drivers:

  1. Please click here to download the appropriate drivers for your printer
  2. Once the site opens click on the download button at the top left
  3. Allow the download to run
  4. Follow the steps on the screen to reinstall your printer
  5. Do not plug in your USB cable until the installation screen invites you to.

  Once the installation is complete, please test printing.

  Please reply to this message with the result of your troubleshooting. Good luck!

• LaserJet P1102w: Laserjet P1102w cannot activate the installation with Windows Vista 32 bit PC computer wireless

  Hello forum HP, I can use the Laserjet P1102w with USB connection on 3 different devices including a portable Apple and PC Windows Vista and Windows 7 laptop computer, but can not perform a wireless installation with the broadband internet connected wireless PC running Windows Vista 32 bit. The main message is that the computer does not find the printer even when using the USB connection. Any help would be appreciated.

  Hi @Kaiser3107,

  Welcome to the HP Support forum.

  I understand that you have a HP LaserJet Pro P1102w printer that connects three thin devices via the USB port, but you can not perform a wireless installation on a fourth device, equipped of Windows Vista 32-bit, because the PC does not detect the printer via the USB port. I would like to help with that.

  Here is a support document which includes 'USB device is not detected by Windows' which can help the issue of detection - Troubleshooting (Windows Vista) USB connections.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP LaserJet P1102w: I do not know my email address for HP EPrint

  Hello

  I have a HP Google Chromebook 14 and I try to my HP LaserJet P1102w EPrint.  I did not initially set up this printer and I need email EPrint to print.  How to find this e-mail address?

  Such an IP address is wrong and will not allow access to the content, the printer or the printer connected to the network.

  Try turning off the printer, make sure it is not located too far away from your router has HOWEVER also ensure there is no less than 1.5 to 2 meters between the printer and the router.

  Turn off the printer, once it is off restart your router by unplugging its power for 10-15 seconds.

  Once you plug in the back of the router allow it 1 to 2 minutes until all lights turns on and you are able to access internet from your chromebook.

  Only, then turn on the printer and leave it a few moments to connect until the blue light turns blue.

  Then print another check for the difference.

  If you see all these addess that starts with 169.254 once again, please specify your model of router, also make it clear if you have any other computer available (this is in order to understand our options if necessary to reconfigure the connection of the printer wireless as such can be done directly from Chrome OS)

  Please let me know the results,

  Shlomi

• I perform a search, results, find the message I was looking for. How can I find this message in my folder structure and subfolder (relatively) complex?

  Hello
  I use structured system subfolder to keep my organized emails (hundreds and hundreds of folders).
  When I do a search, get the list of results and in this list, I found the email I was after, HOW can I find the message? In other words, how can I open the folder that contains this particular email?
  Thank you in advance for your time and effort.

  Right click on a folder, search for Messages, and then click 'Search subfolders', then enter the selection criteria, search, search for a result in the lower pane, then 'open folder '. The message is opened in the Message pane and the containing folder is highlighted in the folders pane.

  It isn't a global search and location does not show the full folder path, but it is another option. Note that the location column can also be displayed in the message search window.

• How can I disable the Google Maps message "Google has disabled the use of maps API for this application? This as Microsoft tries to crush Netscape?

  In the last day or two (8 August 2012) each time I start Firefox (14.01.01) I get a pop up that says "Google has disabled using the maps API for this application. He directs me to Google Maps terms & Conditions, but does not provide a solution to disable the pop up. I tried to disable Google Maps as an Add on Firefox, but still not the context menu.
  It is easy to fix the problem or is this an attempt by Google to force me to Chrome, much like trying to crush Netscape in favour of Microsoft's Internet Explorer?

  I thought about it. It is not the browser itself. It happened that I had two pages that open when I started the browser (at home and at work) and it was one of them who had a Google map. They have had to fix their Web site.
  Sorry Google, to think that you were an evil Empire!

• My daughter is in a wheelchair. Knect does not "see" it. Is the goes to a fix for this in the future?

  Their are a lot of people who can and will continue to use remote controls. However, people like my daughter have a lot of trouble keeping. I know that knect technology is great, but if she can not help any of us, that is this good for?

  Hi, 1.      What is the operating system installed on your computer?       I suggest you to contact the Support of Kinect team for assistance. http://support.Xbox.com/en-us/Kinect/browse?XR=shellnav

• install itunes update gives the error "a program required for this install to complete could not be run.

  Missing package?

  Hello I'm trying to update my itunes to the latest version of the software.  When I start the update process you get about a third or less the way in then an error box appers of reading: "there is a problem with this windows package install." A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ". I am running Windows XP Professional and I have contacted Apple support and they asked me to contact Microsoft.

  Hello

  I suggest you according to the question in this forum and check if that helps:

  https://discussions.Apple.com/community/iTunes/itunes_for_windows

  It will be useful.

• Windows XP SP III, status of the device: a driver (service) for this device has been disabled.

  Windows XP SP III, device status: _ a driver (service) for this device has been disabled.  Another driver can provide this functionality. _ (Code 32)

  Hello; I use a Windows XP SP III; After I entered a CD in my disc drive, I noticed that nothing was happening. So I try to manually click on the disk drive, noting that he had completely disappeared. After checking the status of the device in Device Manager, I found that this note has come:

  A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32). I had removed the device and reinstal it again but still the same.
  Information how to fix this problem would be apreciated

  Try following the steps for Windows XP in the following MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.