HP Support Assistant unable to complete the download of updates

Similar Questions

• I bought the Adobe Acrobat Standard XI and is unable to complete the download because I already downloanded Acrobat XI pro trial.

  I bought the Adobe Acrobat Standard XI and is unable to complete the download because I already downloanded Acrobat XI pro trial.

  Log, activation, or connection errors. CS5.5 and later versions

  Mylenium

• Error 1500 "another Installation is in progress you must complete installation before continuing this one ' when trying to down load a program always appears. Unable to complete the download

  Error 1500

  Hi Frank,.
  Welcome to Microsoft Windows Forums!

  I would like to gather more information about the issue.

  Ø summers - get you this error during the download or installation?

  Ø what application are you trying to download?

  In the meantime, you try these methods.

  Try to put your computer in clean boot mode and check if the problem persists. To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista or Windows 7 by performing a clean boot.

  Steps to put your computer in a clean boot:

  1. click on Start
  2. type msconfig in the Search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  1. in the general tab, click Selective startup.
  2. under Selective startup, clear the Load Startup items check box.
  3. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  4. click on OK.
  5. When you are prompted, click restart.
  6. after the computer starts, check if the problem persists.

  NOTE: TURN ON YOUR COMPUTER TO A NORMAL STARTUP AFTER TRYING THE STEPS ABOVE.

  Click Start, in the search box to start, type msconfig and press ENTER.
  Select Normal startup, and then press apply and OK

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use
  http://support.Microsoft.com/kb/331796

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Support Assistant unable to complete downloading updates of Compaq Presario CQ60-206US

  Made a recovery using system recovery discs and the newly installed DVD player jumped during just before disc one was through. I closed and tighten the screw for DVD player and on disc 1.

  I did a sytem recovery before on this laptop and no problems. This time I can't even open the Support Wizard.

  The architecture is 32 bits.  I'm sorry I can't be more helpful, but this isn't really my field.  I wish you only good luck to find someone who can actually help, not to mention that inviting you to recover again.

• My computer was 20 installation updates and stopped at 12 of the 20. Are unable to complete the download and it says unable to OFF... what I do?

  Computer has stopped in the middle of installing downloaded updates... It said unable to off... What should I do?

  Give him more time!

  If subsequently you must turn itoff, and you have problems:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I am running vista ultimate SP2 32 bit. I'm unable to complete the installation. Support for koadak says that I need to update my windows install. When I go on the site microst, I don't know that one to download. Help!

  I am running vista ultimate SP2 32 bit.  I'm unable to complete the installation. Support for koadak says that I need to update my windows install.  When I go on the site microst, I don't know that one to download. I am running vista ultimate SP2 32 bit.  I'm unable to complete the installation. Support for kodak says that I need to update my windows install.    Help!

  Update your OS via windows update (start > Control Panel > Security > windows update).

• It keeps saying "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. "When I tried to reinstall Windows Vista Home Premium

  I removed the original defective hard drive and installed a new one in my Desktop HP Pavilion. Then, insert Vista Home Premium Recovery Disk 1, then 2 disc. After the prompt to restart the computer to complete the installation of Windows, I got this error message:

  "Windows Setup could not configure windows to run on this computer hardware."

  I then click OK and then this message:

  "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. »

  I have computer knowledge very very basic.

  Please help me!

  Thank you

  Hello

  You will need to contact HP for the problems with the help of the HP restore procedure is not a process from Microsoft.

  You can also try the Forums of HP Support for assistance.

  http://h30434.www3.HP.com/

  See you soon.

• HP Support Assistant is not complete

  When tune-up running, it never ends. This is what happens:

  Step 1. RESTORE POINT GAME - Pass

  Step 2. Defragmentation of disks Microsoft Windows-

  Once step 2 is completed, steps 3 and 4 never operate, which is:

  Step 3. Scan the computer for hardware and software problems.

  Step 4. Establishment of the list.

  What is the problem?

  Hi Chuck,

  Your HPSA could be trashed.  Just get rid of it and try again with a new installation:

  Control Panel > display icon > programs and features >

  Scroll down, find and uninstall HP Support Assistant.

  Restart your computer after uninstalling the existing version of the Support Assistant.

  Install the latest Version of the Support Assistant

  HP Support Assistant

• My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  They are only updated office or all updates?

  For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

  then manually download and install the same.

  If all updates, perhaps consider the following general tips-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• The system is unable to complete the update of security for Windows XP (KB2661637).

  Original title: update security for Windows XP (KB2661637)

  The system is unable to complete the update of security for Windows XP (KB2661637).  How can I get my system to accept the update?

  Hi Joseph,.

  You receive messages or error codes?

  You can reset the default Windows Update components and check if you can install the update.

  How to reset the Windows Update components?

  You can also try to download the standalone update package and check.

  Update security for Windows XP (KB2661637)

• XP is unable to complete the loading and the power of travel.

  XP is unable to complete the loading and the power of travel. It will restart in Mode safe with no problems and then restart to normal safe mode. All programs and everything seem to work OK. CHKDSK/r was run from the installation disk and indicates disk errors have been corrected. Restart the hibernation or standby also works. Ntbtlog.txt is still crushed by the boot of good last and there is no help. It's very long and repeat the load lines and has-no-charge several times! Any ideas what to watch?

  I have lived with this for a few months and reinstalled XP and then new service Pack 3. Nothing done until this difference

  Hmmm...

  NVIDIA drivers are definitely outdated.

  If the system just stops (literally goes off), I suppose a marginal connection inside, an out-of-date driver or a heat problem.

  You can carefully and without requiring too much force, remove one reinstall all you cable and connection inside including your RAM and all other devices installed just do one thing at the time, so you don't mix.  One thing at a time... Unplug it and plug it in again.

  If she runs in Mode safe, your it would mean that the system uses the default XP video drivers (that is why everything is so GREAT in Mode safe).

  When you start normally and will charge drivers NVIDIA, things will run more hot.  Will increase the time on the CPU and video card.  Make sure that all your fans are running, and the system is properly ventilated and ventilated.

  If the CPU or processor on the video card is a problem of heat it just stop - no warning, no newspaper, no nothing.  Cool that turned off for awhile and it could work again for a bit.

  I use the NVIDIA site and let scan them online take a look at your video system and see what he suggests for drivers and consider their analysis if they offer a new driver.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the address of the NVIDIA page:
  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

  You must be on the 275.33 version and you are now on 178.13 (from you given msinfo).

  6.14.11.7813 driver version<---- nvidia="" version="" 178.13="" from="">

  Your msinfo32, video section should look like this when you are finished:

  6.14.12.7533 driver version<--- the="" latest="" nvidia="" version="">

• Cannot format DVD error "unable to complete the format."

  Original title: Impossible to format error DVDs

  Can anyone help. I have Windows Vista Home Premium 32-bit with service pack 2. I'm unable to format a DVD RW it comes back with an error message saying unable to complete the format. I have tried different brands of DVD, I saw it was a mistake before service pack 2 and there was a fix. I have SP2 and it will not apply the hotfix that is a quite old. Any ideas?

  Hello

  It seems that you are unable to format DVD, you get an error that it is unable to complete the format.

  You format the drive by using the "active file system?

  Here are a few troubleshooting steps that you can try to solve this problem.

   

  Method 1: Run the following fix - it.
  

  Your CD or DVD drive cannot read or write media.
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Method 2: Remove and reinstall the drivers for the CD or DVD drive

  To do this, follow these steps:

  a. Click Start and then click Control Panel. Click system and security, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  b. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK. Restart the computer.

  e. After you restart the computer, the drivers will be installed automatically.

  Method 3: Refer to this link.
  Format a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/format-a-CD-or-DVD

  If you have additional problems, please reply to this post and we will be happy to help you further.

• hard drive died. Unable to duplicate. tried to reinstall disk comes with computer and says unable to complete the installation.

  replaced the hard drive.  Reinstall disk and custom factory

  Toshiba satellite a135. hard drive died. Unable to duplicate. tried to reinstall disk comes with computer and says unable to complete the installation. reinstall again. 5 times and still the same.

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• Windows 7 Home Premium 32-bit OS is unable to complete the installation.

  Windows 7 Home Premium 32-bit OS is unable to complete the installation.

  I have a Dell Inspiron 530 of 2007 which came with Vista and has been updated 2 years later at 7 w. I had to reinstall 7 W... 3 or 4 times since 2010. I guess that my machine can't handle W7 very well.
   
  My current problem started with a BSOD problem. After trying some suggestions Internet on how to solve this BSOD problem that did not work, including repair of Windows, I did a data back up mode without failure and then decide to reinstall Windows 7 from the MS CD. My level of understanding is limited, but as noted, I've done this before with success. What I didn't understand is there seems to be another unsolved problem which does not allow the complete reinstallation of windows.
   
  I did a clean install, then a formatting and in both cases, W7 could not complete the installation. It progresses to the final stage of "complete installation" and then there is a second error message 1 that I can't read... "" a problem has been detected... close... "."  It seems to be a reboot loop.
   
  I have since read that the original BSOD problem and the 'detected problem' could also well be linked to the display driver. And this driver it must be disabled before performing a Windows installation. But I'm not able to access Safe Mode or the control panel to turn it off. If this driver is the problem, is there another way to turn it off?
   
  Or are there any other suggestions on how to complete the installation of the operating system?
   
  Thank you.

  I see that you have posted on the Dell desktop Forums and Robert (rdunnill) gave you a suggestion. He is the expert forum on upgrade/repair of equipment in Dell desktop computers:

  http://en.community.Dell.com/support-forums/desktop/f/3515/t/19632098

• Update failed: unable to extract the downloaded files. Please try to download it again. (U44M1l210) January 2016!

  And here we go again. This time it's January 2016 and yet, there is an update that will give the following error message: unable to extract the downloaded files. Please try to download it again. (U44M1l210) The last time, it took about three frikkin' months to clear up this bug. I am a paying customer and should have to go through this s * t again.

  U44... Update error http://forums.adobe.com/thread/1289956 can help

  or

  A chat session where an agent can remotely look inside your computer can help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html