HP t5740e problem update the Bios to v1.04

Similar Questions

• Problem updated the BIOS on Satellite A300

  You update the BIOS in the model of laptop A300 psagce after the update, the device to be exposed to something.

  Please help very necessary

  To be honest, I don't understand how you mean exactly.
  Can you please explain a bit more detailed what you have noticed after updating BIOS exactly?

• Update the BIOS - protected A600 problem

  I'm trying to update my BIOS settings on my laptop (that I was invited to do by the service of Toshiba hardware update).

  I followed all the instructions provided by the program because it extracted and ran the update. However, the computer began the reboot process, but has been 'disconnected' windows (Vista Business) for about an hour now. I don't know how to stop the process without causing serious damage to my BIOS, but this does not seem normal.

  Help, please!

  Hi wilreb...

  I think that the user henharas a bad experience with the BIOS updates.
  I updated the BIOS many times and never had any problems...

  I assume you mean on Tempro software... this software informs you about updates on the Toshiba page. It is not a recommendation for an update, but simply an alert that new updates has been published...

  If your laptop is running properly, then update the BIOS is not really necessary...
  You must follow these tips; never change a running system ;)

  In any case, after the update of the BIOS shouldn't take too long and if she has completed, you should see the new version in the BIOS settings...

  Check it out...

• Problems after updating the BIOS on Satellite Pro P200

  I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

  After updating the BIOS, I have now two problems:

  1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

  2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

  Basically, I want to get everything working again as it should, but cannot find any information on these issues.

  After further review, it appears that the update of the BIOS is not the cause of the problems.

  Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

  After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.

• HP Pavilion Notebook N9R33EA # a: problems with the BIOS update (HP Support Assistant)

  I was offered an update of software SP77359, which seems to me to be an update of the BIOS provided by HP Support Assistant. Version F.82Ap1. Two days ago, I updated the BIOS via the support and, on the report wizard got an other update via the support Wizard. I applied this patch to find that it was still an other BIOS update and now, which has been applied this third update has appeared. Please let know us how I do.
  
  The model number of my machine is actually N9R33EA #ABU (as reported by the Assistant to support) but ths was too long to type in the name of the product.

  Your laptop is a HP Pavilion Notebook - 15-ab208na (ENERGY STAR) for later use.

  I wouldn't update. Simply click the X to remove the download and install the list in the help Wizard.

  The current version on your laptop support portal is F.8.1

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-notebook-PC-series/8499306/model/8942501

• Yet WT8 - after that updating the BIOS 1.6 screen is too bright

  After the update the BIOS to version 1.6, as even the lowest setting of the screen is bright when using the device in a dark environment (e.g. reading in bed). Before the update, I simply set the brightness slider Windows at the lowest level and everything was fine but now it is so brilliant that he hurt the eyes.

  Anyone else with this problem? Is there a solution?

  * Brightness * level is a function of * EC version * (on-board controller).

  There are variants _Two in units shipped: __

  THIS 1.10 + and +-bios 1.20
  THIS 1.20 + and +-bios 1.20

  _After bios upgrade: _

  THIS 1.20 + and +-bios 1.60

  EC 1.10 was 1.20 lower brightness level, 1.10 is so much better in the dark situation, * ask * Toshiba * Europe * to solve this problem.

• Portege R830/PT321E: update the Bios stops with "year error occurred while...» »

  Portege R830/PT321E: update Bios end with ' year error occurred while preparing the environment of update...» »

  Following message appears first

  BIOS version: Worm. current 3.40-> update version 3.70
  THIS Version: worm. current 1.30-> update version 1.50
  BIOS and THIS should be updated

  During BIOS update seems following message:

  + An error occurred during the preparation of the updated environment. You have not given permission to run the update. +

  My settings:
  -BitLocker is turned off.
  -No connection to a docking station
  -Windows 7 is installed
  -Boot mode is enabled? I guess that means:
  "Close all open programs, shut down windows and then turns off your computer."

  Any idea what is the problem?

  Post edited by: ML

  Hi ML

  Stupid question maybe now but why do you want to update the BIOS on this, I think, fairly new laptop model?
  Have you noticed a few issues or hardware issues?

• Updating the BIOS is dead the satellite Pro P300-1AY

  Hi all

  found this forum and really hoping that he can help me!
  I bought a satellite Pro P300-1AY two years ago, it cost me £900 nr so I thought it would be worthy of a purchase.

  A year ago the USBs stopped working, I do it every working solution I could think of anything will do, finally gave up and learned to live without USBs!

  However, a few weeks ago, the laptop at the start stop, I didn't get was the black screen. Probably a video problem I did all the memory check hard drive everything else, however, it was only an intermittent problem, I found if I he tilted on the side she would begin, another thing to live with!

  But two days ago, I heard that if I've updated the BIOS, it could solve all my problems. so I went to the Toshiba site, found the BIOS updated and downloaded, but to halfway through the installation, the laptop froze and I couldn't t he put it off and had to take the battery out to turn it off!

  And ve you may have guessed, he's now won t start. Even its worst, LED lights, and if I put a disc in the cd I can hear it whirring, but that s it.

  Is - this irreparable? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?
  Ty for your time in reading :)

  Hello

  > Is it irretrievably? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?

  Well, usually the BIOS could once again be reflashed, but you would need a traditional version of the BIOS update.
  This version is available for Toshiba FSA.

  So you will need to get in touch with a local ASP technician that could reflash the Rom BIOS module.
  Eventually, after this update the specifications would be stable.

  Good luck

• How do I update the BIOS on the Tecra R940?

  Are there instructions for BIOS update for my Tecra R940/Win7Pro/64 bit?
  Thank you
  AB - Oz

  On the BIOS Toshiba download page you can download the version of WIN. This means once downloaded BIOS, you must run it under Windows running as all other applications.
  By the way: is there a reason to update the BIOS? Have you noticed any problems with your machine?

• HP Omen: update the BIOS

  HP support assistant shows that there is the following update:

  HP notebook System BIOS update
  Number SoftPaq SP74378
  version F.34Ap1

  tried to download and install without success

  should I worry?

  Thank you

  Hello

  Thanks for posting in the Forum from HP Support.

  No, no need to worry.

  Updated the BIOS/UEFI is not a critical task and I would say that you leave like this for now.

  General recommendation I provided to users/customers is NOT to upgrade the BIOS/UEFI, unless they live any sort of BIOS/UEFI problem specific. Just for updaing and update just for the use of the latest verson is not the solution. Any type of update (no matter what and that relesed it) can solve 2 problems but can introduce more than 10 questions. In addition, upgrading the BIOS (for any provider) are risky more because the BIOS recovery is not that easy compared to updates of typical software IF something goes wrong.

  Update/update IF you have any specific questions that you know have been fixed in the new version or for some serious security issues. Otherwise, keep the existing version as long as possible.

  See you soon!

• Satellite M60 - cannot access the HARD disk but update the BIOS

  Hello

  I want to update the bios on a Satellite M60
  the problem is that I can't access either on my hard drive it still reboot

  So, first I want to try to update my Bios but as I can't work with windos XP I need to do it with a Dos command.

  is there any solution for this?

  Thank you very much

  and why you want to update the BIOS?

  Even if the BIOS is not updated, the laptop should work well and should start the Windows operating system.
  This means that the problem with your laptop is unrelated to the old version of the BIOS.

  Have you tried to check the HARD drive or to reinstall Win XP?

• Portege R700 - cannot update the BIOS

  Hello
  I recently bought a Portege R700 19 M and I downloaded the latest BIOS version available in the Toshiba support page and when I run the .exe file, it does not work with this message: "the computer is not supported.
  And when I look in the HWSetup Toshiba tool, it does not display the BIOS version but some weird characters (letters not usual) so I can't find out which version is installed.
  Thank you for your help

  Hey Buddy,

  You update the BIOS to the version preinstalled Windows from Toshiba?
  Are you logged on as administrator when you try the update?

  To be honest I doubt a problem to update the BIOS because I found other threads where users report that BIOS update was successful.

• Satellite L500-1XC - error while updating the BIOS

  Hi, just download the most recent update BIOS but there is an error everytime I try to update to come... "uefi bios winflash over 210 ac of 10% battery attached"

  Connected AC and battery not charging but tried to leave and remove too. Current bios 1.60
  I tried to find a BIOS flash utility but no permits. BIOS default loaded and tried in safe mode too.

  Any suggestions?

  Hello

  I think that's the problem because the battery is not completely charged so you can't update the BIOS. Can you charge the battery when the laptop is turned off? I mean you can see the battery LED and if the battery is charged it changes the color of the orange in white or green (it s mentioned in the user manual). Can you confirm this?

  On the other side, it would be interesting to know why the BIOS update is important to you. Problems with the computer? If it is not updated the BIOS isn't important, you can forget it. Never touch a running system ;)

• Re: update the Bios Z830 Satellite: "this computer is not supported.

  Hello

  I replaced the Windows preinstalled with an installation of Fedora 16, - which works perfectly btw - and hope
  to solve the "Windows only Bios update problem" with a Windows 7 bootable USB drive, which works again
  great so far, but the BIOS160_EC130_WIN.exe said simply: "this computer is not supported." ...

  Any ideas appreciated.

  Bernd

  Hello

  You cannot update the BIOS under Linux and using a victory based version of the BIOS.
  You will need to use the image of preinstalled Toshiba.

• Satellite Pro 6000 - how can I update the BIOS?

  Hi all

  I have the problem that my laptop does not start 9 of 10 times with the message: * block 1 BIOS is damaged, call your service man.

  I want to update BIOS but for the Satellite Pro 6000 I can only find an update the BIOS from Windows. But my laptop does not start! Rarely the machine starts, but when I try to update the BIOS, I get the message that I already have the latest version of the BIOS

  My questions:
  * Is there a BIOS update file that is a BIOS floppy? (for example the Satellite Pro 6100 has 2 BIOS files, 1 Windows and 1 making a floppy disk)
  * Is it possible to update the BIOS with the same version of Windows?

  Or perhaps there is another solution for this problem? Has no need to update my BIOS?

  Thank you.

  Hans

  Hello

  I agree with Luke.
  The rom Bios module seems to be damage.
  Either it must be replaced or flashed again.

  But you won't be able to do that! The update of the Bios on the Toshiba page focuses on winning and you will not be able to update if the windows are not running.

  You last chance is an ASP that could check the BIOS ROM.
  As I said, most high, maybe new reflash module Rom help but cela can be answered simply by an ASP technician who checked this.