Re: update the Bios Z830 Satellite: "this computer is not supported.

Similar Questions

• Update the BIOS, "Current running on a system not supported"

  I'm trying to update the BIOS on a Dell Dimension E521 originally shipped with Win XP, but I recently did a fresh install of Win7 on. When I try to run the installation program, it gives me 'information system' system 'unknown', & "running on a system that is not supported" notice & will not let me continue. What happens with that, & how do I fix the problem?

  Hello

  Latest version of the BIOS for your PC back in 2007 so it will hardly make a difference with Windows 7 performance.

  What are you trying to solve with the update of the BIOS?

  Unfortunately, DELL only offers updates via Windows (XP only, in this case) and not via BACK like many others don't.

  Carlos

• Tecra M10 - update of the BIOS says "this computer is not supported.

  Recently refurbished a M10 - 10I to reinstall the operating system. WinXP install at all so I try to update the BIOS as it seems quite old (V1.5). Most recent version (and is available) for this machine seems to be V3.0. Download and try to run the file "P0065V300" and get the message:

  Package for the TOSHIBA BIOS ver.3.3.0
  This computer is not supported

  What can I do? Its supposed to be for this model!

  Also, prefer a version of boot drive, but hey, I can use a version of Windows, assuming that it runs on Win7.

  Hello

  Tecra M10 - 10I belongs to the series of PTMB1E and according to the page of the Toshiba UE driver, BIOS v3.00 - WIN is the latest BIOS version which is available for this model.

  The BIOS update requires a few additional tools Toshiba as VAP (additional package for Win 7)

  If this driver isn't installed, the update of the BIOS would not work.

• Tecra R10 - 10J: BIOS update abandoned "this computer is not supported.

  Hello

  My laptop is a Tecra R10 - 10J PartNumber PTRB1E-00D002FR, 1.40 BIOS version 11/13/2008.

  I recently bought and installed two modules of 4 GB RAM (8 GB). Enter the BIOS setup, I found 8 GB. Windows 7 64 bit also detects the 8 GB, but uses only 3.80! MemTest and diagnosis of CPU - Z are good for all of the 8 GB. I went from RAM modules from one location to another, but nothing has changed. If I replace a module of 4GB by a 2 GB memory, Windows 7 uses 5.80 is going well. Same result as any module of memory of 4 GB or slot I use.

  I suppose that problem comes from the BIOS. The 1.40 version does not support memory mapped IO functionality.

  So I followed the instructions on "http://fr.computers.toshiba-europe.com/innovation/?download_drivers_bios.jsp?" to find the last good package to update BIOS for Tecra R10 - 10J. I downloaded and ran the BIOS310?. exe, but received the error message "this computer is not supported"?

  Can someone tell me how to upgrade my BIOS or did someone has a better idea to activate the full 8 GB of RAM support?

  Thank you for all!

  Axel Limousin

  Hello

  You must install the VAP (value added package) or if this package is already installed, you must reinstall/upgrade to update it.

  Disable the Antivirus software and disable things of security such as firewalls etc.

  Hope that you're lucky...

• Tecra A10 - 12 H - update BIOS: "this computer is not supported"

  I need to upgrade the BIOS v 1.60 to the latest version of the BIOS. I downloaded from the site of Toshiba bios file (bios - 20091103164158.zip-> P0065v300.exe), but when I try to update comes this question:

  TOSHIBA BIOS PACKAGE VER 3.3.0
  THIS COMPUTER IS NOT SUPPORTED

  My laptop:
  TECRA A10 - 12H
  PTSB1E-01E003IT
  Windows 7 32 bit

  Hello

  Have you installed the VAP (value added package)?

  The VAP is necessary in order to run the BIOS update and Toshiba tools.
  I found a son with the same error message, but the user is using Win XP.

  The problem could be solved by the installation of common Modules (only for Win XP).
  But the VAP is released for Vista and Win 7 and common modules are in the VFR package.

• Tecra R840-PT429E - update Bios message: this computer is not supported

  When I try to install the bios update 12/09/12,3.90-WIN(EC_KBC1.60) I get the following message: this computer is not supported.
  Updated the BIOS, I downloaded from the section of the Bios Toshiba for Tecra R840-PT429E update, windows7 64 bit.

  Hello

  Is the a reason to update the BIOS or you want to update the BIOS simply because the new BIOS is available?
  You have a serious problem with the laptop?

  I have no day BIOS, even if the new BIOS is available for my laptop because I have no problems.

  However, the BIOS requires the VAP (value added package).
  This package can be downloaded from the Toshiba UE driver page
  If there is a problem with the VAP, the update of the BIOS would not start.

  So reinstall the VAP to check if this may help

• Qosmio G30-126 - update Bios message: this computer is not supported

  When I try to install the bios update, I get the following message: this computer is not supported.
  I use win xp pro sp2 and the update of the Bios I downloaded from the Bios Toshiba Update section.

  You try to update the BIOS that is not designed for this laptop!
  If you want to perform an update of the BIOS make sure the BIOS is fully compatible with your notebook series and good!

  Notes; bad BIOS or bad BIOS update procedure can damage the module ROM!

• Portege R700 Bios update problem - this computer is not supported

  I tried the update for Portégé R700 Bios with Toshiba Service Station and by downloading the exe of the bios.
  Both say that "this computer is not supported", but the downloaded bios file is correct.

  What should do?

  Hello

  Go to the page European driver Toshiba and download the BIOS package manually.
  Unzip the BIOS and try to run the exe file once more

  But why you need BIOS update? Have you noticed a few problems with the laptop?
  BIOS update is not required if you don t have problems.

• Windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu

  Hello world

  I know, there are several other threads on this topic, but I couldn't find a working solution. I currently have no OS on my DELL XPS 17 L702X. When I try to install from a USB stick bootable Windows 7 Home Premium x 64 I get this error message: windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu.
  I've tried wiping HARD drive and reformat with GParted. I don't really know what I could do.

  I would be very grateful if you could help me

  Hello

  I suggest that you contact the manufacturer of the computer to change the BIOS settings and check if it is has updated the BIOS.

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know the results. We will be happy to help you further.

• Portable CQ58, disk recovery "this computer is not supported by the system recovery media.

  Hello HP,.

  I have a laptop CQ58-bf9WM, which had Windows 8.1.  The 320 GB hard drive died and bought a new SATA 500 GB laptop.  had no CD recovery, went online, enter all the important information, serial No., model #, then purchased through HP recovery disk, received the CD (manufacturer 708896-001, 708895-001 708897-001) and put #1 disc in the CD started and that's what I get: this computer is not supported by the system recovery media.  You will not be able to continue to recover this system with these media.  "Error: 0100-169-1855-188 b" then you have the OK, then when you press OK, the laptop shuts down.  I pressed ESC on POST, then I tested memory and the new hard drive and they both passed.  HELP PLEASE!  Thank you

  Should not have anything to do with the new hard-both disk that is at least equal or greater than original ability, they work. It is 'possible' that you have received the wrong set of recovery.

  Thing of OE to check. Enter the BIOS by pressing F10 immediately after turning on (have to press ESC, then F10 to the menu). Is the serial number, model number.etc all intact?

• The settings saved on this computer does not meet the requirements for the network

  My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

  Hello Tazdmx83,

  Thanks for posting on Microsoft answers Community Forums.

  This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

  1. click on start and control access panel.

  2. double-click on network connections

  3. right click on the wireless adapter and select Properties.

  4. Select wireless networks, click the name of your wireless network and choose Properties.

  5. in network authentication, select open to disable wireless security.

  6. Please try to connect.

  If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

  http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

  Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

  Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• I just bought the rest of photography, then a message popped up on the screen saying that my computer will not support the program. Will I have to pay?

  I just bought the rest of photography, then a message popped up on the screen saying that my computer will not support the program. Will I have to pay?

  Please check the terms of System. Photoshopand unresponsive to your material, please update your computer or cancel the order, for this you can contact customer service

  [Note: make sure that you are connected to the Web site with the valid Adobe ID under which the product is]

  For more information on cancellation: cancel your creative cloud membership

• Updated the BIOS on Satellite A30

  Hello

  I'm about to update the BIOS on my computer Toshiba Satellite A30 laptop (Service Pack 3).
  I downloaded the BIOS updated and decided to update the BIOS from Windows such as recommended on the Toshiba site.

  On the site he mentions before the BIOS upgrade, please ensure the following:

  Laptop BIOS update:

  Before upgrading the BIOS level, please do the following:
  -Portable is in stand-alone mode.
  -Laptop is plugged into the mains.
  -Laptop computer must be in boot mode and not recovery mode.
  -Remove all PC cards.

  1 Windows based BIOS update:
  1 extract the zip file containing the BIOS upgrade to a temporary folder.
  2. ensure that all open files are saved and all applications are closed.
  3 run the *.exe extracted to the temporary folder. Follow the instructions on the screen.
  4. the BIOS update will be done automatically.
  5. after a few minutes, the computer will restart automatically.

  I'm not sure of what he means by laptop computer must be in boot mode and not recovery mode

  What is the startup mode and how to fix my laptop in this mode?
  Can't I just run the file downloaded from my office?

  Thank you;

  As mentioned by Garrett; You must download the package from the BIOS, then unzip it and then you can run the exe file.
  Usually it s no matter where the package was decompressed!

• Impossible to update the BIOS on Satellite A665

  Hello

  I desperately need help with update my BIOS on Satellite A665 that my battery won't charge and the site said to me updated the BIOS, but it is not letting me update battery is less than 10%.

  Please someone help me because I have no way to use the laptop without power still present.

  Hey Buddy,

  Can you charge the battery when the laptop is turned off? Usually battery LED should show you white and orange color to the loading process if the battery is fully charged. And then start the computer and update the BIOS.

  Try to update the BIOS on the pre-installed Windows version?

• Problems after updating the BIOS on Satellite Pro P200

  I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

  After updating the BIOS, I have now two problems:

  1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

  2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

  Basically, I want to get everything working again as it should, but cannot find any information on these issues.

  After further review, it appears that the update of the BIOS is not the cause of the problems.

  Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

  After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.