HP updates caused my program Weatherbug to stop working.

Similar Questions

• MS Updates caused problems "Media Center has stopped working"

  After the MS Updates this week, we have a problem with our Media Center. We have a HP Touchsmart IQ526 running Vista Home Prem when are connected to the Internet and our local cable system. Everytyhing worked almost without problems because we have installed in January. After that MS Updates this week required a reboot, Media Center stops whenever we change the channel - errors "Media Center has stopped working".  Sometimes when changing positions both with the remote control and with the mouse. Is there anything other than a reinstallation of Vista?  Can you help us?

  Hello Cwray

  Please write to the Microsoft Forums.

  This error message can occur if there is some system files corrupted on your computer. I suggest that scan you a file system [SFC] checker on the computer that would be a search for system files corrupted on the computer and replace them.

  (A) the SFC scan enforcement procedure:
  1. click on the Start button
  2. on the Start Menu, click all programs followed by accessories
  3. in the menu accessories, right-click on command line option
  4. in the drop-down menu that appears, click the "Run as Administrator" option
  5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
  6. in the command prompt window, type: sfc/scannow then press enter
  7. a message is displayed to indicate that "the analysis of the system will start.
  8. be patient because the analysis may take some time
  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue
  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
  11 after the scan finished, close the command prompt window reboot the computer and check.
  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista.
  For more information please visit the link below.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  Check whether the problem is resolved.

  B. I also suggest you to rebuild the Media Center data store.
  To do this, follow these steps:
  1. Click Start, type run in the start search box, then click on run in the list programs.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  2. in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.
  3. in the details pane, right-click right mediacenterdatastore.db and then click Rename.
  4 rename the file in mediacenterdatastore.old
  5. run the file, %systemdrive%\Windows\eHome/mcUpdate.exe
  6. launch windows media center.

  Click on the link below to get more information on media center.
  http://thegreenbutton.com/forums/default.aspx

  C. I also suggest you to check the boot and if you are able to access the Windows media center.
  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Boot stops interference with other third-party software on the computer.
  Steps to perform the clean boot:
  1. click on start, type msconfig in the search box and press ENTER to start the System Configuration utility. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  If the problem is solved, check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• Not Microsoft Windows - bar tasks or the Start button "register Microsoft windows not updated, (he is) Microsoft Windows has stopped working".

  On the computer startup, there is no button or the start task bar.  window appears reading: "Registry Microsoft windows not updated, (he is) Microsoft Windows has stopped working."  I could get on the internet, but I have a blank desktop!  What should I do?  Re-stall the disc?  I have a tower HP w / Vista bought in 2008.  THX, Lizz

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Let us scan SFC and check that it prevents this error to occur.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
  To do this, follow these steps:
  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833
  
  Method 2.
  a. also, you can try again user account if the problem is resolved.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
   
  b. If the problem does not occur in the new account user set your user account damaged. The steps to fix the corrupt user account are given below.
  Fix a corrupted user profile.
  http://Windows.Microsoft.com/en-in/Windows-Vista/fix-a-corrupted-user-profile
   
   
  Let us know if that helps.

• The data execution program continues to stop working Internet Explorer

  Data execution program continues to stop working Internet Explorer

  Hello

  EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
  http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

  The problem might actually be an add-on or another program to the origin of the problem and you should check that
  1st.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
  machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  not better?

  Close IE and try again IE or IE with no Addons

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and it would be
  unusual with Prevx market except for an occasional cookie of low level (not a big deal), update it, then
  run as a scanner.

  http://www.Malwarebytes.org/

  I would add prevx so.

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program under Vista
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  ====================================

  If nothing else works you can try this however I would use as a last resort.

  IE - Tools - Internet Options - Advanced Options - Security Section - clear the check box enable memory Protection to mitigate
  Online - APPLY - OK attacks close and restart IE

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Error message 'Adobe Flash Player Update Service 11.6 r602 has stopped working & has been closed'

  Original title: Adobe flash player

  I get a message 'Adobe Flash Player Update Service 11.6 r602 has stopped working & has been closed'. How can I fix the update service so it will update?

  Hello

  This can help you:

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  See you soon.

• The program executable has stopped working

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with... of programs a SSC downloaded for smpt installation
  • Error messages. the program executable has stopped working... a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available
  • Recent changes to your computer. None
  • What you have already tried to fix the problem.no I don't know what to do

  Confirmed that the program is compatible with your version of Vista and the hardware in your computer? http://www.microsoft.com/windows/compatibility/windows-vista/.

  You can try to uninstall the program, download a clean copy (in case where the original has been altered) and re - install the new download and then see if the program works.  If this does not help, try right-clicking on the executable and click on run as administrator and see if that makes a difference.

  I hope this helps.  If this isn't the case, follow the advice implied by Malke response and contact technical support by the manufacturer of software for assistance.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I wanted to update my CS2 programs that don't work, Illustrator and InDesign CS3, so I downloaded them separately.  Then I thought that I would be charged twice, so I sent two programs in the trash, a mistake.  When I tried to download Creative Suite 3 S

  I wanted to update my CS2 programs that don't work, Illustrator and InDesign CS3, so I downloaded them separately.  Then I thought that I would be charged twice, so I sent two programs in the trash, a mistake.  When I tried to download design Creative Suite 3 Standard, the computer says that I had already downloaded Illustrator, InDesign and Photoshop.  What can I do?

  ABC1001,

  It is possible that your CS2 does not work due to the activation server is interrupted. Please visit these links for replacements:

  Activation server stops for Creative Suite 2 and Acrobat 7 product Macromedia

  Replacement download Acrobat 7 and CS2

  Guinot

• Microsoft update caused my Adobe Photoshop does not work

  When I update to Microsoft and downloaded it caused my Adobe Photoshop 7 is not working.  I can't even reinstall the program.  Someone has an answer for me?

  Photoshop 7 is old and no longer supported by Adobe. It is a program that uses low-level access to Windows functions. These functions can be changed at anytime by Windows updates. Programs that depend on them and are not supported by their manufacturers may stop working after Windows updates.

  You can restore updates (and not accept the most recent updates) and let Windows 7 vulnerable, or get a new version of Photoshop or another program that is supported.

• After you download an update from Windows, my audio device stopped working.

  original title: no audio device is installed

  After an update of windows, my audio stopped working.

  I have the cd for my motherboard and installed the driver put it does not appear and all I get is no audio device installed

  I do not use speakers on this computer, I installed with audio sharp screen.

  any suggestions... I do a system restore?

  I use windows vista 64 bit on this machine (at home)

  The motherboard is a classic series intel DG31pr

  4 GB ram corsair

  other than the update it worked very well...

  Hello

  1. what was the number of KB (Knowledge Base) of the update?

  2. at the Vista service pack update?

  Click on the link below, so wasn't the update of Windows Vista Service Pack.

  Information about audio device drivers that are known to cause problems when you install Windows Vista service pack

  Hope this information helps.

• Since I've updated Windows, most of my apps stopped working properly. error is "Inconsistent Application".

  Since I've updated Windows, most of my applications (Adobe Photoshop cs5, Autodesk Sketchbook, Intuos5 small pen and touch tablet) have stopped working correctly.

  None of them open and the usual error is "Application Incompatible."
  They have worked before, but now the same error pops up just.
  What should I do?

  Hello

  Thank you for writing to Microsoft Communities.

  According to the description of the problem, it seems that most of the applications do not work after the update.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. the updates have been installed on the computer?

  2. What is the message full error do you get when you try to open\access these applications?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.

  Method 2: If the problem persists then I suggest you remove an update and check if it helps:

  Remove an update: http://windows.microsoft.com/en-US/windows7/Remove-an-update

  Please follow these recommended steps and post if you still experience the problem.

• How can I download Weatherbug? I get Weatherbug has stopped working on my screen.

  How to download weatherbug.com?  I get weatherbug program has stopped working.

  Maurice

  Try this link to download WeatherBug

  http://WW2.WeatherBug.com/downloadclient.asp?zcode=z6167

  You can uninstall the current control WeatherBug Panel\Programs\Uninstall a program

  first of all, then download and install the latest

• The last 3 times I clicked on auto updates of firefox firefox has completely stop working and I have to open the Explorer and again to download firefox.

  I'm afraid to update firefox since the last 3 times I did so firefox stop working and had to be reinstalled.

  I'm glad it works again. This is the important result and thanks for posting back.

  Repeated to uninstall and reinstall Firefox often do not help.
  Clicking on the pop-up of unknown or doubtful origin, it is always a bad idea.

  Screenshots will help if you are still having problems.

  Connects to any future reference is not to the internet, after a new installation may be related to problems with the firewall or your security software not recognizing Firefox.

  • Difficulty of problems connecting to websites after Firefox update
    • Configure the firewall so that Firefox can access the Internet
    • Configure the Windows Firewall to allow access to the Internet Firefox
  • Other issues, see Firefox cannot load websites but other browsers may

• After installing the update tabs 26.0 fox has stopped working

  I have Windows 7 on both of my computers. After updating firefox to 26 my tabs fox has stopped working. It shows that it is enabled, but I get a white screen. I can't edit or save all Web sites to the best sites.

  In fact, the developer has a new version which is awaiting review. If you want to install now until the Add-ons site admins finish to check it out, you can find it on the page of 'Versions' here:

  https://addons.Mozilla.org/firefox/addon/FoxTab/versions/

• Error Code 800706BE and the 800706BE error Code could not update windows. CSP as also stopped working.

  I can't update windows. I get to 800706BA and error Code 800706BE codes. I also get frequent error messages that Cryptographic Services like stopped working. I would really like to fix this way! Thank you.

  OPTION A:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  OPTION B:

  You see the effects of a hijackware infection!

  NB: If you had no installed anti-virus application or subscription has expired at thetime the first machine was infected and/or your subscription has expired since or the machine is not been kept fully patched in Windows Update constantly, don't waste your time with any of the following: Format & reinstall Windows.  A repair install won't help!

  Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

  Otherwise...

  1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

  NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

  2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

  2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

  3. now run a thorough check for hijackware, including registration required before a proper Court, logs don't here. DON'T SKIP THIS STEP!

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• update failed error 80070643 and Setup stops working failed failing msiexec.exe application module msi.dll

  I am running windows 7 Home premium.  The first error was a failure to update office 2007.  several attempts to solve the problem highlighted windows install stopped working.  I was in the service and verified that it was automatic and started, but nothing will be installed using msi.  Here is the log of one of the failures.

  Log name: Application
  Source: Application error
  Date: 2010-10-05 19:14:09
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer:
  Description:
  The failing application name: msiexec.exe, version: 5.0.7600.16385, time stamp: 0x4a5bc3e6
  Name of the failed module: msi.dll, version: 5.0.7600.16385, time stamp: 0x4a5bda99
  Exception code: 0xc0000005
  Offset: 0x0009f9ad
  ID of the process failing: 0xff0
  Start time of application vulnerabilities: 0x01cb64e302b7335a
  The failing application path: C:\Windows\System32\msiexec.exe
  Path of the failing module: C:\Windows\System32\msi.dll
  Report ID: 418c73bb-d0d6-11df-9130-0013a9c04fe6
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1000
      2
      100
      0 x 80000000000000
     
      82378
      Application
      Grace-laptop
     
   
   
      MsiExec.exe
      5.0.7600.16385
      4a5bc3e6
      MSI.dll
      5.0.7600.16385
      4a5bda99
      c0000005
      0009f9ad
      FF0
      01cb64e302b7335a
      C:\Windows\System32\msiexec.exe
      C:\Windows\System32\msi.dll
      418c73bb-D0D6-11df-9130-0013a9c04fe6
   
  

  I can't find anywhere to get a new version of Installer 5.0 for windows 7

  Replace damaged by files in your DVD files:

  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/