HP XW6400: XW6400 problem with two quad core Xeon E5335, Intel Speedstep, failing to clock on Linux/Unix processors

Similar Questions

• Can I upgrade Qosmio G50 - 12I with "Toshiba quad core HD processor"?

  I have a Qosmio G50 - 12I which seems that Toshiba HD processor is not included in this model.
  I can update this model with the quad core processor and also can I connect a second HDD?

  Hello

  Seem to be the processor quad core HD from Toshiba is not a part of this model of laptop and I doubt you could improve it with this extra processor. I think the motherboard is different and does not allow these updates.

  > can I hook up a second HDD?
  Checks if the second HARD drive bay contains the HARD drive connectors necessary.
  If there are no connectors, then you will not be able to use the second HDD

• LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  Check your hosts file.  to help with this and more:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

• problem with babylon runing on windows 8-storage initialization failed (error 10)

  problem with babylon runing on windows 8-storage initialization failed (error 10)

  Hi Shlomy,

  1. when exactly you get the error message?
  2. do you have an error message?
  3. are install you authentic version of Babylon?

  This issue would have occurred due to some third-party programs, the origin of the problem. I suggest you perform the clean boot. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  If the problem only occurs with babylon click here to send a request to the Babylon 8 support team.

  Post us the results after trying the steps above.

• Problems with two of my OPOS hardware after upgrade from XP to 7

  I have two HP rp5000 point of sale systems and I'm having a difficult time linking two of my OPOS hardware components.  My receipt printer, A794, even after installing the new drivers still is not recognized by the computer.  The other thing that doesn't connect also the HP Pole display, I think that it's an LD220.  I recently updated the OS from XP to 7 and that's when I had the problem with my computer, try to recognize them.  The pole display is USB and the USB printer to series.  Is there any firmware for the latter to try to make them work again?  I have download the firmware for the Pole display, but that didn't work either.  I don't think I saw one for the printer.   Any help would be useful.  Thank you.

  Npgwi2000, welcome to the forum.

  I'm sorry you have to do another post, but this is the Forum for the POS systems.  Experts it will be able to help with your problems.

• strange problem with two Cruzer 32 GB flash drives on XP Pro

  I have two Cruzer 32 GB discs that will not work on a particular PC running XP Pro SP3.

  The readers work in other PC running XP Pro and PC running Windows 7.

  Now, until someone says, "it's obviously a problem with the PC" I have to say that USB Flash drives other works very well in this PC manufacturers, as does my Seagate FreeAgent Go drive (so it is not a question of power).

  Flash only readers who present a problem are the readers of Sandisk.

  When I insert the Cruzer it flashes slowly then after maybe 20 seconds start blinking quickly and continues to do so as long as she remains inserted in the USB. There is no indication on the screen it was inserted - nothing ofering to the media browser, files, etc.

  The drive appears in my computer as drive F removavble, but no file or folder is visible.

  When I go to administrative tools > computer management > disk management, disk is NOT visible, it is not visible as a removable drive.

  In Device Manager it appears as SanDisk Cruzer USB one, using a device driver Microsoft date 01/07/2001.

  I tried to uninstall this device, removing the Cruzer then turn the PC, but when I plug it in there new detects new hardware - Sandisk Cruzer and drive hard, but then says that it can not work properly and invites me to restart the PC. Subsequently, he then returned to the symptoms described above.

  The TWO Sandisk Cruzer 32 GB disks with the same problem.

  Someone at - it any other ideas?

  Thanks pechter!

  Kies was the problem.

  I followed the instructions in this thread http://forums.sandisk.com/t5/All-SanDisk-USB-Flash-Drives/sandisk-cruzer-blade-problem-troubleshooti... and it cures the problem.

  I must point out that it has not affected any other brand of flash drive I've tried, the incompatibility seems to be only between Sandisk Cruzer and Kies, leads me to conclude that this is a problem of Sandisk.

• Problem with the Apple Core Image?

  Can someone confirm for me that there is a problem with Apple Core Image which has feature to DNG. I have problems with Nikon RAWs converted with DNG Converter. Once changes have been made to these DNG (in Lightroom 2.3) and the metadata and previews updated software (Preview, etc.) based on the main Image don't seem to use the embedded JPG (with applied adjsutments) but well the smallest thumbview, not up-to-date. I do not use the option "convert to linear" when converting.

  >... but Apple OS uses its own rendering system (part of Mac OS) to display

  > previews in Finder. It is completely independent of the melting of LR,

  > or LR of embedded previews.

  Hi Eric - so a software program that uses Apple CoreImage to render a LR

  "adjusted" DNG will be or does not display a picture of the DNG that has been

  cropped.

  Will not. In general, LR settings (e.g., cultures, fill light, etc.) are not

  applied by Core Image. These types of adjustments are specific to each flood

  converter.

  Eric

• About how many machines virtual on a dual CPU Quad Core Xeon 2 .5GHz

  VM how much I'll be able to run on the following material using ESXi 3.5?

  2 x Xeon quad-core clocked at 2.5 GHz

  16 GB OF RAM.

  The virtual machine will be different Windows Server 2003, 2008, Ubuntu Linux operating system. Mainly used as Web servers and a few database servers, hosting CRM.

  Thank you

  Tony

  We use VKernel capacity Analyzer

• problems with two stray files - automatic and custom

  Hello

  I've been tinkering with and deleting files that I should go far, and one of the effects is that I have now two folders (containing the MS files with encrypted file names) are no longer in their home for good. I put the someplace temporary where I can always find them again, but I need to know where they both came in the first place not least because they may (or may not) involve different problems that I had with my programs since I've messed around with the files, that I should not have. Two records are called 'AutomaticDestinations' and ' CustomDestinations. Can someone enlighten me please know where should I send these two files? Thanks, davidc

  Hello DAVID CORKINDALE,.

  Have you tried to do a system restore to a time before making changes?  Please let us know status.

  System Restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

• Some subtle problems with two monitors on Windows 7

  I used two monitors with your Windows 7 Desktop for quite awhile and I just had to replace a.  This is a problem which is probably easy to fix, but I don't know how to do it.

  I figured out which monitor, I wanted to just in front of the keyboard (the larger one) and that I wanted on my right.  The new is more.  They both work very well, but there are two problems:

  1. the office and the taskbar are in the older monitor to the right - I do not know how to move.

  2. the mouse is confused.  He considers that the monitors are in the reverse position.  In other words, when the mouse is moved on the screen to the right, I have to move it OFF THE RIGHT EDGE OF the SCREEN to enter the screen on the left.  I know that I can get used to this, but I'd rather not have to.

  Thanks in advance.

  DK

  Right-click on an empty space on the desktop and choose "Screen Resolution."

  (or Panel of-> screen-> the resolution).

  Above under 'Change the appearance of your screens', you should see two icons of the screen display.  Simply slide one on the right to the left of the icon on the left (so that they switch positions). Then press "OK" your way out.

  To select the screen that contains the task bar, select the icon for this monitor in the same screen as above and a small box should appear below the "Multiple displays" line that says 'Make this my primary monitor '.  Just check this box and OK your way out.

  HTH,

  JW

• Problem with two Logitech F710 on Windows 7 x 64

  Hello world! I have a strange problem.

  Let me start from the beginning - I have 2 Logitech; s f710 and I was playing on them perfectly, when I had 32-bit Windows. I played with my friend in superhero marvel lego arkham city and etc. Then I changed my OS to Windows 7 64 bit and that's when my problem started.

  First I used this guide to install my F710 - it check out - http://blog.plee.me/...input-driver/

  After all the manipulation my controller was working perfectly, but then I tried to play with my friend in Mortal Kombat, one on one, or scale of tag and I discovered that this game is grateful to my two controllers AS a. Two of us could play a hero. When I tried to make one - I pressed a button on a carpet, and when I'm picking a second player - the game telling me this controller "dispositif device already in use, please select another device"!

  The same problem in Lego marvel heroes - we can not play together more.

  How can I solve this problem? You will appreciate all help!

  PS has also tried installing the emulator, but it has not fixed my problem, maybe I did something wrong?

  Hello

  Have you tried to download and install the pad Logitech Gaming Software and wireless F710 Connect Utility from the Web from Logitech website game?

  If this isn't the case, I recommend that you download and install these software and check if the problem persists.

  Wireless Game pad F710 Web site.

  I also recommend that post you the question on the Forums of Logitech you can receive assistance from their purpose as well.

  Hope that the information provided is useful. Let us know in case you need more help.

• Problem with ksoap2-j2me-core - 2.1.2.jar

  Hello

  I am developing an applliaction that will get some values from the DB server and submit button it will update the DB again.

  I tried with the pre-audit ksoap2-j2me-core - 2.1.2.jar. But it gives me an error during construction

  "org.kobjects.base64.Base64: error!: lack of card from the pile to the label: 165.

  I guess that the .jar file is having a problem. Someone can give me the pre-audit file or is there another solution.

  Thank you

  Rakesh

  Hi Rakesh,

  Have you looked at the HEART, it can help you.

  http://www.BlackBerryForums.com/developer-forum/155972-BlackBerry-ksoap2-tutorial.html

  TNX.

• Problems with two sites; they have worked OK until some time ago.

  (1) a day (there are several versions of FF) Firefox could not load more http://dictionary.reference.com/ (However it still load sister website http://thesaurus.com), so I have to use the IE engine.
  (2) since the last update FF13.0.1, it loads http://www.bloomberg.com/tv/ but LIVE TV does not work (it does not). Again, it works when you turn the engine of IE.
  Just to save time: no cache, cookies or other problems 'cleaning up', I tried all.
  Thank you.

  First of all, try resetting Firefox. Refresh Firefox – reset settings and Add-ons. This simple step will eliminate the many problems in Firefox with just one click.

  A few other basic problems you can try things is the following:
  Run all Windows updates, install all required service packs, etc.

  Updating your graphics driver (Firefox uses the graphics card for rendering and an outdated graphics card driver can cause problems. Update your graphics drivers to use hardware acceleration and WebGL

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• NEITHER USB-232/4 works incorrectly with HP Quad CORE and XP SP3 and PPP

  I replaced my dual core PC with XP SP3 with a QuadCORE HP XP SP3.

  After that my NI USB 232/4 does not work with the PPP more.

  Do this with COM1 of the HP works.

  Solution: I replaced the NiSerial with Version 3.3 3.4 pilot.

• OfficeJet Pro 8620: Problem with two-sided printing by default settings Officejet Pro 8620.

  On my MAC, I opened the preferences system - print & Scan - Options & supplies, the pop up window only contains two tabs: Gerneral and power levels. The other tabs such as the default settings are not displayed. So I can't set default 2 Facer of printing. In such a case, I find that I can always print both ways in the face of some software where I can change the settings for print specifically in this software. But I can't change the settings of the printer in Adobe Acrobat format, because change is always through the same interface as I mention above. How I solve the problem? I am connected to my printer via wifi. Thank you.

  

  Hello

  In Adobe Acrobat, open the print dialog box, and then click on the "Printer" button... "to access the print dialog box standard operating system.

  There should not be a default on a Mac tab, the settings can be saved as default recording these as a preset in the print dialog box, then a used preset will be default.

  Shlomi