HP15-af001au: lack of HP logo

Similar Questions

• HP15-f023wm: lack of RAM slot

  Access the user Panel on the back of the laptop shows the card Wifi and the system RAM. There is a stick of 4 GB of RAM, which I assume is installed at the factory. On the section contiguous, next to the RAM already in place, is an area that seems to be able to receive another stick of memory run. However, this area has no location for plug RAM in and the brackets on each side to keep it locked. Is this correct, or is it a factory default? It would be useful to have an another 4 GB of RAM.

  On Baytrail as your N series Celeron processor models, it is only a single memory slot no doubt keep the price as low as possible. Traces are there but not the actual memory slot as you saw. You can install a module of 8 GB in this niche to have total of 8 GB.

• After replacing a hijacked homepage, the Google logo is no longer there, even Google, or even diverted serarch?

  Firefox home page has been hijacked by Bandoo. We went back to Firefox, but lack the Google logo on the home page and the search results. Is it Google, or is another search engine still there since the hijacking? The orange long Firefox box top left went too.

  For the FF button, you can click with the right button on the top of the window and select the Menu for the moment. Reset then.

• iPhone 6 s more, menu at the bottom lack.

  iPhone 6 s more, menu at the bottom lack.

  After trying to RESTART or REBOOT, the menu at the bottom of the screen is missing. Is there a work around for this problem?

  "Reboot or restart"... How?

  By pressing home and power together key and holding them for 10 seconds until the Apple logo appear?

  That's what you should try.

  If not, please tell us exactly what you are doing and what you're seeing (or not see).

• Think that the point that is real protection uss microsoft logo? I can't open the system restore

  original title: point seems that real uss microsoft logo shield antivirus protection is disabled I can't open system restore or take the line

  I have ibm think pad used my pc friend now this program warning me thative been infected big time has already heard about lack of heuristic module when this virus scan runs and of course I have to pay for this assistance

  The system is infected by a rogue security program. Here is a list and the removal of the steps during the major part of the current and previous programs - Rogue
  Virus, spyware, & malware removal Guides Expert MowGreen Windows IT Pro - consumer safety

• Message "you run lack of disk space on RECOVERY (d :))".

  From: Robert judge

  On my new VISTA PC, I tried to use the built-in backup program.  The back-up apparently failed because there is not enough room on the "RECOVERY disk (d).

  Now, when I restart my new VISTA PC, I get this message:

  "Low Disk Space you run lack of disk space on RECOVERY (d). To free up space on this drive by deleting old or unnecessary files, click here... »

  When I "click here," I gave then "disk for RECOVERY (D :). cleanup.  Disk Cleanup offers "Office installation files" and "Basket", but both have "0 bytes" so I can't free up space in this way.

  When I open the backup and Restore Center and try to back up files, the program starts by "creating a shadow copy.  However, I then get a message:

  "An error has occurred...". There is not enough space to save the backup files.

  Free some disk space or change your backup settings. (0x81000005).»

  If I have little space on"RECOVERY", I only need saved Documents.  But even when I check only the 'Documents', I get the same error message.

  I think that I should delete the contents of the D RECOERY and try again.  However, there seems to be some files that are already installed on RECOVERY D.  However, I see a folder called "game 2008-06-08 backup 193208," which I suppose is the backup failed I tried on 6 June.  Should I just remove this folder and try again?  Or y at - it another way I should try to use the program "backup and restore"?  I'd appreciate advice.

  Mickie,

  As Ryan has noted, the recovery disk D should not be used for storage, do you have anything installed to him directly?

  If you're trying to backup, then cancelled or failed, then follow these instructions:

  1. Click on the Logo Windows (start)-> type to start searching the backup status and Configuration
  2. Next to the "automatic backup is currently activated" click on Turn Off
  3. Close the window.

  Then, we will need to remove the incomplete files on your D drive.

  To do this, you will need to click on start click on computer, and then double-click Disk Local (d)

  Here you will find two things, a Mediaid.bin file and a file with the same name as your computer (you can check by finding a backup set inside this folder), you must remove both to get rid of the message. Let us know if you need help, to know the name of this folder.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 lack of drivers acer aspire series m

  Original title:

  I recently bought a used acer aspire series m & it came with windows 7 in it. To get acquainted with it I realized that I have a lot of missing drivers!

  My question is after discovering that it came stock with windows 8 and not being not not be able to download windows 7 drivers you lack acer site because under the drivers available for my exact model # it offers only windows drivers 8 - WHAT DO I DO? Am I forced to buy windows 8 or I am somehow able to obtain from microsoft or acer?

  Just a wild stab here, do you know if the hidden recovery partition is still intact? Well, you can find, turn off your computer. Now, back on the power and as soon as you see the ACER LOGO, press left ALT + F10 keys. If you see the "loading files screen, then you are to reset your computer to factory default settings, but if you do not, the recovery partition has disappeared and you may need to order a set of. ACER recovery disks.

  How can I restore my computer using the eRecovery Management program?

  http://Acer.custhelp.com/app/answers/detail/A_ID/12869

  Use the following steps for purchasing recovery media.

  1. Visit our Acer http://store.acer.com/store/acerna/en_CA/html/pbPage.eRecovery/ThemeID.30483300/Currency.CAD, then select eRecovery.
  2. Enter your serial number or the SNID, then click submit
  3. Follow the on-screen instructions to make your purchase.

• BSOD after Logo Windows at startup: bad driver, AutoFailover

  I get BSOD after Windows Logo at startup. Said Startup Repair: bad driver, AutoFailover.

  Two weeks ago, that I was getting the same BSOD after logo, but only with the bad driver. I not did something to fix it (or Startup Repair), it's just dissapeard after a few days. Also, the last day that I was getting BSOD, the night when I started my pc, it remained 2 minutes at Intel Boot Agent initialization and also 30 seconds to the black screen that follows (before the windows logo). When this situation occurs I get more BSOD. I tried to restart my pc but I stayed another 2 minutes to the Intel Boot Agent initialization. This problem has been fixed in the next morning, when I started my PC, even once, I don't know how, I did nothing. I remember that it is sometimes used to stay 2 minutes Intel Boot Agent, even when I was on Windows Vista, and it also sets automatically.
  I upgraded my BIOS a few weeks before getting the BSOD, but I don't think that's the problem. In addition, there was no new driver installed before getting the BSOD, drivers have been installed after the first BSOD (even if the event viewer and the reliability monitor do not mention the first BSOD, only those who have followed the installation of the driver I know there's a BSOD before, I'm sure.)
  My system: HP Compaq 8510w (Original with windows vista bussines, did a clean install of 7 ultimate)
  BIOS version: F.20

  C: drive has only 10% free space - 15% free space is optimal for Windows

  Please visit the site Web of the manufacturer of the PC and download/install all drivers.  These are devices that lack the drivers:
  *******
  Controller of communication Simple PCI PCI VEN_8086 & DEV_2A04 & SUBSYS_30C5103C & REV_0C\3 & 21436425 & 0 & 18 that the drivers for this device are not installed.

  Serial port PCI PCI VEN_8086 & DEV_2A07 & SUBSYS_30C5103C & REV_0C\3 & 21436425 & 0 & 1 b, that the drivers for this device are not installed.
  No available ACPI\HPQ0006\2 & DABA3FF & 2, the drivers for this device are not installed.

  Base system device PCI VEN_1180 & DEV_0843 & SUBSYS_30C5103C & REV_10\4 & 118B1C9 & 0 & 34F0 the drivers for this device are not installed.

  Fingerprint Sensor USB\VID_08FF & PID_2580\5 & 1E4845E3 & 0 & 2, that the drivers for this device are not installed.

  RICOH PCMCIA\RICOH-BAY8CONTROLLER-F1B2\1 Bay8Controller the drivers for this device are not installed.
  ******
  Please uninstall ATI Tool - it does not work in Win7 and may be responsible for your BSOD (and its drivers are from 2006).  More info here: http://www.carrona.org/drivers/driver.php?id=ATITool.sys

  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  BSOD BUGCHECK SUMMARY
  The debugging session: 05:54:32.426 Fri 31 August 2012 (UTC - 04:00)
  Loading dump file [C:\Users\John\_jcgriff2_\dbug\__Kernel__\083112-17019-01.dmp]
  By: 7601.17803.x86fre.win7sp1_gdr.120330 - 1504
  System Uptime: 0 days 0:00:08.455
  Bugcheck A, {7bcc, 2, 0, 82afb482}
  ERROR: Module load completed but symbols can be loaded for mssmbios.sys
  Probably caused by: ntkrpamp.exe (nt! DeleteNodeFromTree + 46)
  Error checking code 0000000-a
  Arguments 00007bcc ', memory IRQL bitfie 82afb482 00000000' 00000002',' address
  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
  BUGCHECK_STR: 0XA
  Nom_processus: System
  FAILURE_BUCKET_ID: 0xA_nt! DeleteNodeFromTree + 46
  MaxSpeed: 2200
  CurrentSpeed: 2194
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  The debugging session: 04:17:05.296 Thu August 23, 2012 (UTC - 04:00)
  Loading dump file [C:\Users\John\_jcgriff2_\dbug\__Kernel__\082312-17004-01.dmp]
  By: 7601.17803.x86fre.win7sp1_gdr.120330 - 1504
  System Uptime: 0 days 0:00:11.356
  CD error checking, {8931d 000, 0, 82a271f2, 0}
  ERROR: Module load completed but symbols can be loaded for mssmbios.sys
  WARNING: Unable to verify timestamp for ATITool.sys
  ERROR: Module load completed but symbols can be loaded for ATITool.sys
  Probably caused by: ATITool.sys (ATITool + 2017)
  000000cD Bugcheck code
  Arguments 8931d 000', memory 00000000' 82a271f2 value ', if not 00000000', int Mm
  DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
  BUGCHECK_STR: 0XCD
  Nom_processus: System
  FAILURE_BUCKET_ID: 0xCD_VRF_ATITool + 2017
  MaxSpeed: 2200
  CurrentSpeed: 2194
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  The debugging session: 04:00:26.646 Thu August 23, 2012 (UTC - 04:00)
  Loading dump file [C:\Users\John\_jcgriff2_\dbug\__Kernel__\082312-21933-01.dmp]
  By: 7601.17803.x86fre.win7sp1_gdr.120330 - 1504
  System Uptime: 0 days 0:00:07.675
  Bugcheck 1000007E, {c0000005, 82c2e4a4, 80786888, 80786460}
  ERROR: Module load completed but symbols can be loaded for mssmbios.sys
  Probably caused by: ntkrpamp.exe (nt! ObpLookupDirectoryEntry + 2 b)
  Bugcheck 1000007E code
  Arguments c0000005", ex-82c2e4a4 ', the 80786888 ad', except 80786460', Contex
  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
  Nom_processus: System
  BUGCHECK_STR: 0X7E
  FAILURE_BUCKET_ID: 0x7E_nt! ObpLookupDirectoryEntry + 2 b
  MaxSpeed: 2200
  CurrentSpeed: 2194
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

• Beginner? : printing process and web designed logo

  I could benefit from some wisdom on the workflow to use for intended for display and print output, specifically a logo.  I have CS2 and Macromedia Studio 8.

  The logo that I built (for a local group) was made in FW and then saved as a gif for use in DW for our site.  Recently, I started to learn IT and ID and would like to learn a 'happy' path with these applications 'available' to redo the logo.  This time the planned output is display and printing and at several levels.

  If my path would be even easier and better, I'd be ready to add Acrobat to the list of applications.  So far, I only used Acrobat to convert to simple document.

  Logo graphics are almost completely vector with some small silhouettes as gifs.  Gifs are on the net, so I guess that their ppi for the screen.  (Specfically, they are all black silhouettes a salmon and a horse).  The logo image is attached.

  From there, I guess that the path will be all things vector at Illinois.  Previous support of the Forum, I learned to build the vector closer the final scale as possible and/or favor downward revision during the scaling upward.

  The silhouettes appear to be another matter.  I see that I can integrate vector and rastor to Illinois, but what is it you do for scale to print or display output?  Since I guess rastor isn't as vector, it seems that the path is limited by the 'density' of the image (?) original.

  Thank you

  Tom

  on the workflow to use for production intended both display and print, more specifically a logo

  General rules:

  Design for the first impression, then reuse it to the web, not the other way around. Print is also much more demanding and more varied. You can 'things excessively' for the web at any time. But trying to work in the other direction leads invariably to rework useless.

  Do not do the work to design a logo in Fireworks. Use a vector drawing program designed to be printed (using FreeHand or Illustrator, since you have those.) Fireworks is RGB. To do this, CMYK or spot color. Yes, you can copy traces of fireworks and paste them into FreeHand or Illustrator, but why the hit on the thorns? Simply create the work in an appropriate first program.

  Never use items have "caught on the web. First, there are the problems of ownership, others have already alerted you. In addition, however, a good logo is supposed to be unique(among others). Unless the image captured on the web belongs to you or your client, it is not yours to use in anything, especially something that you want to call a "logo". Even if it is your client, it probably isn't unique. Commercial clipart is also (by definition) not unique.

  Define the contractual terms. Understanding which will provide you the customer, what will charge it and what his rights are. Load correctly for the chart of one's own identity. Considerations of costs should include:

  • Quality of the design itself (e.g.: your own level of creative talent and technical skill)
  • The invloved to work in the production of the foregoing
  • Time spent in research and reflection
  • The time spent in meetings
  • The number of rounds of preliminary sketches related reach a final decision of the customer
  • The scope of the project (i.e.; A mark of identity for a multinational company has more inherent value than a local mom & pop store.)
  • The scope of the rights (e.g..;) Marks of identity should be fully owned by the customer. The client must be frank and clear of any legal obligation make you when / if it needs changes, or get/challenge of usage rights. Charge accordingly for all jobs for which won't let you any property - which you should assume to be the case in the real work of logo design.)

  Not taking into account the foregoing, the General procedure for your specific example:

  1 redraw traces raster images. Make all your paths as simple and clean as possible. Do not include special effects dependent on the application-specific features. If possible, (as in your example) avoid any treatment that requires a pixelation and weight direct hit. Don't include all of the unnecessary elements. (Ex: practice totally amateur drawing of white objects to 'hide' the parts of other objects.)

  2. you use five colors, so your direct is impossible for the color version. Use CMYK colors. Set overprint black items so it does not build with other tiers of record.

  3 convert text to paths. Evaluate the results and clean if necessary. (Ex: the Union text glyphs which overlap.) Beware especially of the results at the level of the plan of TrueType fonts - especially cheap ones. TrueType uses quadratic Bezier curves that should be converted to cubic curves so that they appear the same in most drawing programs. Many TrueType fonts at low prices were initially drawn as Béziers cubes and then "automatically converts" line quadratic, imposing corruptions of form to which the producer is completely unconscious. When you use drawing software again "automatically convert" paths, you can also unintentionally made mistakes. (This is one of the reasons why I would never knowingly contract with option - and then the discovery immediately would "fire" - one of the many too many publishing houses which the self-proclaimed 'pre-press experts' make a routine practice willy-nilly to convert all the text on a page to the railways - practice hideously lazy lover - man often praised in this forum as the "expert" advice.)

  4. a package of good logo must include at least one version for the single color impression. The owner must send the files suitalble for advertising in yearbooks, newspapers, football programs, etc. etc. Then when you are finished, make a copy of the work and convert all colors in grayscale. Not just use automatic conversion to grayscale; your sleep to select appropriate and advantageous contrasts. Use 100% black for text, so that the name seems low compared to the graph.

  5. a good logo package must include at least a version for printing than the line drawings. The owner must send files for printing or engraving on pens, neckties or shirts embroidery, screen printing on T-shirts, embossing or stamping foil on other promotional items, vinyl-cutting or engraving glass to build signs, etc. etc. Leaving the necessary value judgements to the seller of the product individual is madness; It will quickly lead to corruption and the lack of consistency in the treatment of identity - which is antithetical to the objective to have a logo. So when you are finished, make a copy of the work and wisely to create a version that contains only black. Test this version for the readability of very small size.

  6. According to the features of the program you use, make a copy of the work of color as another page or a separate file. Convert the colors to RGB. Once again, simply based on the conversion automatic is often not recommended. Intelligently Choose RGB values to use for each color. (Another widespread amateur; automated simple calibration and color intent are two totally different things.)

  7 export files available. Use the files CMYK, spot color, levels of grayscale and line drawing to export PDF and/or EPSs files suitable for import to current programs of large printed graphics. The RGB file to export any raster images for use on the web and in Office applications.

  8. If is not a good Style Guide of construction for the customer, all least prepare a plain text ReadMe file that lists all the files that you provide and an explanation brief and clearly understand the purpose of each. Include a list specifying the color of all the values used, including at least CMYK, RGB and spot colors. If you know other specific uses, including specifications of color for those as well (ex: sign vinyl and/or embroidery thread colors and/or printing ink).

  JET

• don't want no logo appears on the print page

  Hello
  
  I use the logo in the application that will appear in all pages.
  I have the key "impression" on this page.
  By clicking on the button print the same page opens for printing with logo on top.
  What is the way that the logo is not present on the page to print.
  
  I use this for printing.
  function PrintAndGo()
  {
  var win = window.open
  ("/ apex/f?") p = & APP_ID.:50: & SESSION. (": PRINT: NO.: YES");
  Win.History.Go (0);
  Win.Window.Print ();
  Win.Focus ();
  }
  
  
  Thank you

  var win=window.open("/apex/f?p=&APP_ID.:40:&SESSION.:PRINT:NO::::YES");
  

  Does switch to view printable version, using the page template Print Version, where the table cell containing the string substitution #LOGO # lack the * class attribute .t6ApplicationLogo. Probably the best approach in these circumstances is simply to remove the string #LOGO # the printable version model.

• Header logo photo maische with the rest of the page

  I apologize for my lack of web design skills, im a little new to this. I have my logo as a header and fashion design companies, it looks fine, but when I update the hosting server and refresh the page, superimposed logos main menu navigation and section of the page. I think I could solve it if I just resize the header, but I don't know how. Can someone help...?

  What is c?

  "Featurded Widgets.

  (I'm afraid to ask!)

  And 425K for masthead image? YIKES!

  In any case, change this-

  #header {}
  height: 60px banner;
  line-height: 60px banner;
  }

  on this subject.

  #header {}
  height: 266px;
  }

  and see what happens.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "Rufus65" wrote in message
  News:gl5k53$j8i$1@forums. Macromedia.com...
  > oh my bad im sorry, here's the link:
  >
  > http://techhelp.nxserve.net/index.html
  >

• Lack of App music

  Hi can anyone help solve my problem?  My husband iphone 5 IOS 10.0.2 lacks the music icon, I tried to get into the settings and then reset and then reset homescreen layout but it always appears, I also tried to restart the iphone?  I can not find how to get it back?

  I have the same problem on iPhone 6 and can't seem to find any help online... Please HELP, Miss me my songs...

• PowerMac G4 - Boats only for the Apple Logo. Nothing else.

  Hello

  So I have a PowerMac G4... Yes old enough. Well its been all this time working and I like it a lot.

  But today, it is consumed only until the Apple logo. and nothing else happens. Ive done some methods to try to get it working again. He acknowledged that the HARD drive is there and I can select. But that's about it.

  I should also mention that I have not the keyboard or the original mouse. I have the keyboard of Windows so :/

  Shutdown

  Disconnect all external devices

  start in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  If you did specify that in your "I did some methods' which is without assistance, unless you can specify that only those who were.

• When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please

  When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please

  Hello

  If the software on your watch is being updated, leave your watch and your iPhone until the process is complete (including the not remove your watch on the charger):

  Update the software on your Apple Watch - Apple Support

• photos logo has a small 1 that she

  photos logo has a small 1 by him as if there was a msg but there is not how can I get rid of it

  Thanks Prin

  It is in the Photos icon in the dock?  A number on the icon in the dock for Photos means that someone has added a new photo of a photo album shared you subscriber to the or add a comment. To dismiss this alert, open the 'Activity' album in the Photos and see the new photos and comments.

  You can also disable the badge of the Photos icon in system preferences > Notification.

  Uncheck the button "App Icon Badge" for the Photos.