After replacing a hijacked homepage, the Google logo is no longer there, even Google, or even diverted serarch?

Similar Questions

• Help - my p6142p stopped at the HP logo for a long time...

  Has started last night, my HP p6142p landed on the screen of the HP logo for about 15 minutes before he proceeded to the Nvidia Raid control and continuation to Windows7.

  There is no hardware / software changed.

  I had disabled the HP logo screen once I'm in the Bios setting and reloaded the default bios setting but the same result.  He detected cpu, ram, hd and usb then deadlock (10-15 minutes), before continuing.

  Anyone have this problem?

  Wasabi

  I thought of it and the cause was my Espon all-in-one, for some reason, the reader on the printer did not cause the USB mass storage device error in card device manager.

  I had not plugged and and reset my printer and my pc boot normally again.

  Big_Dave, thanks for the quick response.

• updated PS, 2014 for the CC update in the menu bar on the Mac, or so I thought, but even after reboot I still have the old version, despite 'about' saying there is no update.  Any ideas?

  In the Mac, the Update icon told me that there are many updates.  I had install them all and they did, apparently with success.  However, after I opened PS, it is still the old version and if I go to help and click on updates, it says I have the latest version, but it is still 14.2 what is happening?  Thank you.

  Found the old version of PS CC and new 2014 a.  Removed the old and now corrected a problem.

• Satellite A135: Vista will not start after replacing HARD drive using the recovery disk

  Toshiba Satellite A135-s7403 HARD drive failed, I have replaced the 80 GB with a WD Scorpio blue 250 GB hitachi. When I try to restore with recovery disk came with the laptop, it passes through two discs 1 and 2 and starts with the start-up of windows for the first time and then runs to the greenish with the spinner blue screen please wait... thne black screens for a second or 2 and then back to spinner, please wait and then it appears the box "installation of windows could not configure windows to run on hardware. This computer' only option is to click OK.

  Where to click ok, you get an another msg that says "windows could not complete the installation, install reinstall windows. I tried like 50 times now. Startup Repair indicates the root = failure cause while the installation program is underway. I know that my drive are good, as I adjusted used then about a month when I upgraded the memory because the original memory 512 MB was not enough o well running vista.

  Hello
  To be honest I n don't know what the problem is there but can you get the original installation disc of Microsoft and try to install the OS, just to see if the OS installation will complete successfully?

• Windows Update does not not after replacing hard drive in the laptop

  I had to replace the hard drive in my HP Pavillion DV6911OM. Everything works except Windows update. I tried all the recommended fixes I could find on any site without success. Any ideas anyone?

  Hello

  (1) you get an error message?
  (2) what exactly happens when you try to update Windows?

  See the methods mentioned below and check if that helps

  Method 1:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  See also:
  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

• I forgot the password of Windows. After Windows starts, boot, shows the DELL logo and is our user name, ANNE and under that must enter PW

  Dell Innspiron M5030, Win 7, 64 bit. Did enter the United Nations, ANNE and pw?   can't remember, used about 9 months ago after the failure to remember and put aside to wait to call Dell last. Now out of warranty and their first service unaffordable fees. If anyone can help?

  How I would enter as an administrator in Mode safe? I would like to explore this option.

  It seems that you skipped a lot of security options that Microsoft has integrated into Windows 7 in order to protect you from the forgotten passwords.

  If you have already enabled the administrator account, then it becomes automatically visible on the login screen during the boot without failure. You can see in Mode safe?

  If you can't, then it is a complex process that allows you to reset a password. She relies on you start the machine in Repair Mode, using your CD to repair Windows. You burn such a CD? If you do not, you can burn it on another computer? Please report here to get further instructions after that you are able to start your machine in a Mode of repair with this CD.

• After using deny permissions of the folder security, is no longer able to access the folder from anywhere

  Hi, this is how things went wrong: I tried to restrict access to a folder on our server by using the permissions denied, file security.  When I try to locate the file for other machines connected to the server I can not see it now, which is kind of what I was aiming for. However, I am not sure what I have done because even though I can see the folder by using the server machine, I can't actually access.

  When you try to open the file I get now: \Accounts documents refers to a location that is unavailable, it could be on a hard drive on this computer or on a network. Make sure that the disc is inserted correctly, or that you are connected to the internet or to your network and try agaiun. If it can't be located, the information may have been moved to a different location.

  When I right click and try and go to the tab Essensials in this folder, I get: the required guarantee inforamtion is either unavailable or cannot be displayed.  Help please!

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

  http://TechNet.Microsoft.com/en-us/ms772425

• Program stops immediately after pressing any key on the keyboard.  Can no longer enter data in data fields.

  Program worked great until yesterday.  Whenever I press any key on the keyboard, he immediately leaves the program.  What has changed?

  Hello

  Would you please check with the account of another user with Admin rights to reproduce the problem.

  Kind regards

  Christian

• HP ENVY 17-3290NR: wrong information after replacing the motherboard

  Hello
  I have a problem after replacing my motherboard because the old stop working
  I had a new HP spare parts for my HP ENVY 17-3290NR after installation I realized that in hp say assistance:
  HP pavilion dm3 instead of hp envy, series and product number say 123456789
  so I can't use my drive recovery or the app by default because I've read that I must retatoo the motherboard, but hp do not provide me with dmifit or something similar, then what can do? I call the tech support of hp and they just told me to go back to that motherboard despite the part is correct, he's simply wrong information
  
  so, how can I change the information on the bios?
  
  

  I retattooed my motherboard using dmifit and now everything works fine

• HELP-my x120e is stuck in a boot loop - without reach the bios logo

  Hello world

  I hope to explain clearly what is my (BIG) problem with my x120e.

  Yesterday, I noticed a strange behavior on my bios. I tried to make some changes for example. Switching fn with ctrl key, which allows the charger usb, or AMD - V technology. With f10, I saved and restarted the computer. CTRL-FN keys has not changed. I went into the bios and I saw that nothing has been recorded. I repeated the process, without success. Without stops could be made. As I turned off the computer.

  After a few minutes, I wanted to turn on the computer, but here's the big problem. The computer does not start. After pressing the power button / computer starts (I hear the fan noise and light on the green power button) but, after 6 seconds, without reach the bios logo, it restarts and it will indefinitely until I stopped him keep the power button.

  What I tried after searching the forums was:

  1. remove the battery, keeping the power for 60 years (and 30) button pressed seconds. Re-connect battery. NOTHING

  2. I removed the system memory, put back them. You try to start. NOTHING

  The netbook is 1 month old. It's very frustrating.

  Can someone help me with this? I live in Albania, no here Lenovo support center.

  Thanks to all those who can help you.

  abvasili

  
  

• Acer Iconia A1 - tablet will only power on the acer logo and no more.

  When I try to turn on my Tablet it only goes to the first logo screen.  Usually there is a bigger logo and a logo smaller and powers then on.  It gets stuck on the first screen.  When I turn off, it isn't unusual buzzing noise, lights out.  Any suggestions or should I just throw.

  A1?--

  Try this:

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/30956/~/factory-data-reset-on-the-Iconia-A1-810...

• How to get the video intro off my google home screen I already saw it, where is the firefox logo used to be.

  How to get the video intro off my google home screen I already saw it, where is the firefox logo used to be. I started with the last update that I rebooted.

  Hello
  to change the homepage when opening firefox-press 'Alt' and click on tools-> Options.

  Main menu, you can change the URL.

  If the problem persists, you can follow these simple steps:

  Enter about: config in the address bar and press ENTER. Accept the message of 'dragons' to see the Advanced preferences screen. Use the above search box to enter the below pref.
  

  You can assign an empty string to stop your Firefox to retrieve "extracts" and brandLogo changes the browser.aboutHomeSnippets.updateUrl pref. Right-click this pref and select Edit then clear the value as pref in the box that appears, and then click OK. Who will also disable "snippets" that appear under the container of the research on the default home page.

  Then you must open the folder of your profile, via help > Troubleshooting Information > profile folder > > button view folder. Then close Firefox. Your profile file open with Firefox closed (Firefox '3-bar' menu key > exit/Quit), wait or two minutes, then remove the storage\moz-safe-about + home folder in the Firefox profile folder to remove the brandLogo and stored in IndexedDB code snippets to make Firefox use the default brandLogo and a defined default code snippet.

  If you later change your mind about these changes, you can reset the pref browser.aboutHomeSnippets.updateUrl via the context menu and Reset allows to retrieve the default value using the storage\moz-chest-fort-about + home folder again.

• Satellite M100-233: stops right after the "XP" logo

  Hello
  I have a Satellite M100-233 with XP Home Edition SP3 (in Portuguese)
  When it is connected to the mains and the battery is not fully charged, sometimes the yellow light does not shine.
  Check the voltmeter application when this happens, tells me that the battery is on, the energy source is the sector, but the battery runs down.
  As I continue to use the laptop, the amount of the battery is reported as progressively less, until he tends to zero, then the laptop just turned off, as if she was not connected to the mains.
  Even if I start with the battery charged to 100%, after a couple of hours (sometimes more, sometimes less) the same thing happens.

  From an authorized dealer, they told me that it was probably a short battery shorted out.

  Get not that: * if she take the battery out of the laptop and turn it on:
  -Most of the time it turns off right after the "XP" logo.
  -It seems that this happens more often when the battery was fully charged the last time that I used it (strange! "I imagine this?)
  -Also sometimes happens after that I use the laptop for a while

  The only unusual bios message I get is "no TPM or TPM has a problem." I guess it has to do with the cryptographic protection, so I imagine that this has nothing to do with this issue.
  About two years ago, there was a problem with the battery (it ceased to be recognized as present by the laptop) which has been repaired under warranty: they told me that they had replaced the motherboard then. However, at this time there that I could continue to work normally without the battery, which is not the case now.

  I would be grateful for any advice. The most annoying is that this problem follows an irregular pattern, and the diagnosis, the dealer gave me seems hard to believe. As I use my laptop to collect data for research abroad, it is quite a risk for me to use it if I can't be sure when it will turn off on its own.

  Hello

  To be honest, I doubt that anyone here in the forum would be able to provide an exactly the answer to this question
  I think that it of almost impossible to say what's wrong without running any hardware checks.

  But to me it looks like a card mother number possibly it s power of electronic power supply which is part of the motherboard.

  What to say, maybe you need a new motherboard, but the new mobo is an expensive item, and in my opinion, you should first check if it is s to replace the motherboard or buy a laptop second hand for the same money.

• My home page is Google, but the club logo and the research seems higher on the page than normal... can I adjust the position?

  I had to set the parameters on Google to not use Google Instant in their search parameters as no cursor showing on the google search field. After the change, it seems that the logo and Google search box seems higher on the page of Firefox. I would like to be able to adjust the height of the logo/Google search box. Please tell me if I can make that adjustment.

  Reset the page zoom on pages that cause problems: view > Zoom > reset (Ctrl + 0 (zero); Cmd + 0 on Mac)

  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• Search engine continues to change the logo of firefox with 'Search The Web' and takes me to different search engines, Bing or Google so far. I don't want to. It used to be always on the Google, and I want to again permanently on Google. Help?

  Just like the States mentioned above. This refers to the search bar on the right. I don't want to remove it, I like to use. I want to get back the Google value permanently. Even if I turn it on to Google in the drop-down menu, when I restart Firefox, it changes back. Once again, instead of any other logo of search engine, it has a small logo of Firefox, saying 'Web search' next to him in grey if no text is entered. He often gives Bing search results, even if I deleted Bing in search engines installed.

  I also checked the default search engine in topic: config, and despite what I describe above, the default value is still on Google.

  Why this is happening and how to fix it? It didn't happen until the other day here, so it would be after the update to Firefox 6.

  Go to your add-ons Manager and disable extensions test pilot.

  Fixed a problem. Someone should pay me now!