HP15 startup: error code 59571929

Similar Questions

• Yet the startup error code: 1

  Hello. I have a problem. When I start again I get an error: "Configuration error, please reintall the program" I have reinstall but it did not help.

  Pre-training system:

  -Windows 7 64 bit Service Pack 1

  Please help really is important!

  

  (Polish language)

  Error code: 1

  I don't know what you have tried since there are several options to these links.

  You reinstall? If so, have you run the cleanup tool after uninstalling?

• Startup error code: 0xc0000225.

  After restarting my laptop once, windows 7 just sitting in either a screen empty or sitting at the "Starting Windows" screen.

  I restarted my laptop and receives the status code: 0xc0000225 and then told to launch the repair from the installation disc.

  I have created a disk of my office repair, inserted into the laptop, and now he can't seem to recognize the repair disk, always encouraging me to insert it.

  So now do I track down an installation disc to see if that is different from the repair disk, or is there something else I can do?

  Here is an image of the error screen: http://imgur.com/wEUBqfQ

  It's on a Pavilion dv7.

  Thank you

  Hi Clauy,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I saw your message with the error on booting. From my research, it seems that need you an installation disc if the repair disk does not work. I found only a few detailed steps on this problem of fixing on this third-party site. They double boots of origin displays with Linux, but you can just skip this part. The repair disc, you have created the exact same operating system of Windows 7? For example, you do not need to use a Windows 7 Basic to repair a Windows 7 Home Premium.

  Thank you

• startup error codes

  I get this message at startup 'c:\Windows\system32\config\systemprofile\AppData\Local\omonubil' access denied.  It doesn't seem to affect the operation of my computer, but it's annoying, someone knows how to fix this?

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• The configuration of your Pc startup data is missing or contains errors: 0x000014c error code

  Hello

  See if any body can help here... I get this blue screen:

  ************

  RECOVERY

  Your PC needs to be fixed:

  The Configuration of your PC startup data is missing or contains errors.

  file:\\EFI\Microsoft\Boot\BCD

  Error code: 0xc000014c

  You will need to use the tools of recovery on your installation media. If you do not have any installation media (like a disk or a USB device), contact your system administrator or the computer manufacturer.

  Press ESC for UEFI firmware settings

  ******

  First of all, I could enter option 11 and run the factory reset, I was so happy because I thought it won't be easy... but then after I did the factory reset... I get this blue screen. If I press ESC I get into this next screen:

  F1 system information

  F2 System Diagnostics

  F9 boot device Options

  F10 BIOS Setup

  F11 recovery system

  ENTER - continue starting.

  This is what happens when I click on one of these options:

  F1, I enter the system of information without any problem, then I click on to continue and return to the screen last... so I press F2 and super, I'm able to run the Test of memory and hard drive check 100% without any problem in one of those who, after that I'm done with my tests I press exit and I'm back to F1 , F2, menu etc... now I want to try F9, F10 or F11. disappointment in this option 3 I go back to the blue screen described at the beginning of this post. (I already plug in a USB key with a bootloader, which works perfectly)

  so I can't do anything, nothing at all! crazzines.

  So what I did to check why I can't enter BIOS or at least to boot from my USB... I removed the lid of my laptop botton and removed the hard drive and is then, how I was or I am able to log in the BIOS - I made the changes to start USB first, then the HD and that's how I was able to boot from USB - BUT if I connect the hard drive back I'm not able to enter the BIOS or boot from USB - so basically I'm stuck in this blue screen and I can't boot from a USB key, if I connected HD... I can't use any option... no BIOS, nothing... So yet again, I disconnect the HD.

  This is one:

  HP ENVY Sleekbook TS 4

  If you can't access BIOS with the HDD connected, you certainly won't be able to start on the recovery USB. This is indicative of a failing hard drive.

  Install a new drive hard and then start on the recovery key.

• error code 2718 at system startup

  Original title: error code 2718

  I tried to install a HP scanjet 2200c scanner and couldn't make it work. I then uninstalled! Now, when I turn on the computer, I get an error message 2718! It is annoying and would like to know how to solve this problem!

  Hi Boltman619,

  Try these steps and check the result.
  Step 1: Re-enter the Setup engine
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:
  MSIExec /Unregister
  MSIExec/regserver
  c. start the computer and check the difference.

  Step 2: If the problem continues, check if this error is associated with linked any program currently running on the computer. To do this, try the following steps:
  a. open the article: http://support.microsoft.com/kb/310353
  b. method 2, follow steps 1 and 2, and then restart the computer to see if the problem persists.
  c. If the problem does not persist in the boot, then follow step 3 and step 4 to find out which is the origin of the problem, and once you have found the culprit, uninstall the program and check the result.

  Note: Don't forget to follow the steps in the steps to configure Windows to use a Normal startup state"" section.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get the error "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

  original title: NTFS problem
  Every 5 seconds, I get a warning (event ID 136) that says: "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

  Immediately followed by an error (event ID 137) that says "on the C: volume default transaction resource manager encountered a one-time error and could not start. The data contains the error code. »

  I am running windows 7 ultimate in any way to solve this problem?
  

  Hello

  This problem occurs if the Windows file system transaction log is damaged. The Windows file system uses the transaction log to retrieve the system transactions when a file error occurs. The system of common log (CLFS) transaction logs may be left in an inconsistent state. When the CLFS transaction logs are in an inconsistent state.
  To resolve this problem, delete the files .blf and .regtrans-ms in the folder % Windir%\System32\SMI\Store\Machine.
  After you restart the computer, the registry regenerates the deleted files. These regenerated files are in a consistent state.
  1. click on Start , type cmd in the Search box, and then click cmd in the list of programs .

  2. click on run as administratorand then click continue.
  If you are prompted for an administrator password or for confirmation, type the password, or click allow.

  3. at a command prompt, type the following command and press ENTER:
  fsutil resource setautoreset true c:\
  Note these steps assume that Windows is installed in the default location, drive C. If this is not the case, adjust the drive letter of the path of the folder to match your configuration.

  4 restart the computer.

  I hope this helps.

• Pavillion G6 - 1a52nr: my Pavillion G6 - 1a52nr gets error code (ks.sys) at startup

  My computor keeps restarting because of the error code (ks.sys), it automatically restarts and I can't do anything. All of the suggestions.  And I am not able to troubleshoot since I can't keep it long enough. THX

  The computer back and the main problem was that Skype updated and my laptop computer webcam didn't like that. The conflict was between Skype and Webcam.  He took care of that and also replaced the hard drive had a few deaths on an area if I had them replace the hard drive. The hard drive was not the issue, but I replaced it because they had it.

• HP Envy 4520: new HP Envy 4520 error code Oxc4eb800 at startup?

  Very frustrating that the printer is brand new and I even not at the installation stage to add the cartridges or paper. "Error code oxc4eb800 when up... have tried engine ERS power on" method, but does not... I have literally this just taken out of the box and in this case... .Please help... I, m at a loss.

  Welcome to the HP Forums.
  I hope that you are well @Patrik1,

  I read the error message/code you see on your urge for 4520 and I wanted to respond to troubleshoot!

  Please visit the link below and try the reset for this error. If the error persists, call the helpline to discuss a replacement printer.

  "' 0xc19a0005" or similar error screens

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Have a nice day

  HP technical support are available by clicking on the following link:

  http://support.HP.com/GB-en/contact-HP/

  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

• On startup, I get the following error message: Error Code 0x8007007e, stopping me to connect.

  The section "help" on this Web site provide the following workaround:

  Workaround for error 0x800705aa code, 0x8007007e error code and error code 0x80004005

  To work around this problem, replace the file Dpcdll.dll using a clean Dpcdll.dll file has the correct version.

  Note To get the clean Dpcdll.dll file, copy the Dpcdll.dll a new computer installed.

  My problem is that not only I know not what is Dpcdll.dll file but if I did, I don't know where to find one on a new computer or how to replace on my PC.

  Any help would be appreciated. Now, my PC is dead in the water.

  Here is a link that will answer your questions and help you extract the dll file, you must
  http://support.Microsoft.com/kb/815065

• The Startup - ORA-00600: internal error code, arguments: [3700], [1], [15]...

  /usr/lib/Oracle/XE/app/Oracle/admin/XE/bdump/xe_lgwr_2811.TRC
  I have a database of XE for personal use, which lost power today. After starting the machine up, I get the following in the .trc file:
  
  (Unfortunately, I'm a Middleware and Metalink has been no help so far)
  
  Thank you, Jason
  
  Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
  ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server
  Name of the system: Linux
  Name of the node: dignan
  News Release: 2.6.18 - 8.el5xen
  Version: #1 SMP kills Jun 6 00:05:22 EDT 2007
  Machine: i686
  Instance name: XE
  Redo thread mounted by this instance: 1
  Oracle process number: 6
  The Unix process PID: 2811, image: oracle@dignan (LGWR)
  
  NAME OF THE SERVICE :() 2008-12-10 17:45:37.803
  SESSION ID: (46.1) 2008-12-10 17:45:37.803
  2008-12-10 17:45:37.803
  ksedmp: internal or fatal error
  [ORA-00600: internal error code, arguments: [3700], [1], [15], [2], [2], [], [],]

  In fact when I did research for this, I found this bug is very close, but it's for 9i. It looks like a mutation of the same bug.
  The workaround for the problem, is...

  recover the file from backup or rebuild control a :)

  Bug No. 2683298
  UPGRADE FAILS WITH ORA-1103 AND INSTANCE ACCIDENTS WITH ORA-600 [3700]

• Netflix error Code: S7363-1260-00003266

  Someone at - it a glimpse of this Netflix error Code error code: 1260-S7363-00003266

  Thanks in advance.

  I had this problem too and have been on the phone for 3 hours trying to solve their 'engineers' it.

  So apparently it is caused by something taking the DRM crack that Netflix uses to check the content and on the old Mac (by 2014) because they have a different procedure DRM or the chip than the newer ones. So what has eventually occur, it was that they installed some scripts on my computer to reset several thing in safari, caches, cookies etc and we ended up basically restore safari to its state of origin, but even if it we could not lead to a determination.

  So today, I live with the same question, for some reason netflix will work in Chrome but Netflix can't stand either because they Chrome Chrome active have not used high definition on this subject.

  • Things that I can perhaps resolve this for you is to enter in Safari this link 'http://netflix.com/clearcookies' this will only delete cookies from netflix and apparently others have found luck with that.
  • Try to create a new user and try if it works for you.
  • Start your computer in safe mode, what does only system files to run, or file which have been put on the computer during the installation, nothing to the user base. To do this hold down SHIFT key at startup to the top, and it should start as usual, except in red text, you should see safe mode.
  • Last resort: If your adventure feeling always take a backup of your computer and complete a new installation and if this does not work nothing do you will be able to solve this problem with ease.

  I'll try to be useful to you because I am also eager to see what your findings are with this question and this sharing can also be a help to others with the same problem.

  A little more about what operating system do you use on your mac? e.g. 10.11.4?

  And just to clarify, you use correct safari? And if so what version?

  There are a few more things we can try if the first 3 do not work, although if your keen sense to try the last one.

  See you soon

• Error code: BIOHD-2

  * I forgot to put a check mark on the - mail me when someone answers - section *.

  Hello

  I'm helping a friend fix an error message received at startup - error: "echec failed boot drive, enter the system disk and press enter". Pressing F9: Diagnostics - results in all tests pass except the path of the boot: Error Code - BIOHD-2 WARNING: no drive detected.

  System:

  HP Pavilion Slimline mod. s3307c - Prod. # GZ727AA-ABA

  Windows Vista Edition Home Premium

  Seagate Barracuda 7200.10 - 320 GB HDD - P/N 9BJ13G-622

  I also have:

  -Checked to make sure there is no disc in the Atapi DVD Drive

  -Try another SATA - cable and double checked that all the cables are connected properly.

  -Call 800-HP-INVENT - they confirmed that he was no longer under warranty and directed me to their website - hp.com/go/support - am frustrated he then stumbled upon this Forum from HP Support.

  The option of Start Menu does not list even a HARD drive - it lists only the DVD player.

  F11: System Recovery - goes back to the same boot disc failure... screen

  The pc was purchased in 2008.

  How the hell did the average person knows how to solve this problem?

  Any help would be greatly appreciated.

  Maybe a problem with the drive CD/DVD like HERE there are several different drives / Firmware on the driver of the BIOS page here check to determine which drive you have. Or, if you have another computer with a disk that you can use temporarily to try to recover? Doesn't even have to be installed, I simply hooked up to a DVD player for cables and used.

• {Cannot acess Photos in iCloud - "Internal Server Error", "error code": 500}

  Hello. I've always used Photos app inside icloud, but since 2 weeks ago, I just cant. Whenever I try to use photos inside icloud.com app I got the same error ("Internal Server Error", "error code" {: 500}.)

  I can still see my photos get updated through photostream and icloud windows app. The problem is the only application of photos inside icloud.com

  IS FATAL

  true

  NAME OF THE APPLICATION

  photos

  TYPE

  Server

  JOURNAL

  Tuesday, February 2, 2016 17:46:18 GMT: WARN: could not send message.

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: rules of polyfill or region no. Intl. Jump RegionFormatter to initialize.

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: running the Application Photos

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: since the passage of null in [Object Photos.PreStartupViewController:object619]

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: send request: GET https://p18-photosws.icloud.com:443/ph/startup? clientBuildNumber = 15 G 78 & tanceId=BFE94A4F-B245-45BF-9445-4A3DD396835C&dsid=1029823930&locale=pt-br&cruuid clientIns = 7 d 091310-0f49-4ff0-b86a-29663ff377d9

  Tuesday, February 2, 2016 17:46:19 GMT: DEBUG :--> request 1: GO to https://p18-1-photosws.icloud.com:443/ph/startup? clientBuildNumber = 15 G 78 & clientI nstanceId=BFE94A4F-B245-45BF-9445-4A3DD396835C&dsid=1029823930&locale=pt-br&cruu id = 7 d 091310-0f49-4ff0-b86a-29663ff377d9, headers: body [object Object],: (omitted)

  Tuesday, February 2, 2016 17:46:31 GMT: ERROR: error recovery/starting. (500) response: {"requestUUID": "a4663688-cb28-43f6-00ff-04f22ae7bbf5", "errorReason": "Internal Server Error", "error code": 500}

  BUILD NUMBER

  15G.98d4967

  HOST

  www.iCloud.com

  USER AGENT

  Mozilla/5.0 (Windows NT 10.0;) WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Safari/537.36 Chrome/48.0.2564.97

  IDDM

  1029823930

  ENVIRONMENT

  PROD

  RECENT JOURNAL POSTS

  Tuesday, February 2, 2016 17:46:18 GMT: WARN: could not send message.

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: rules of polyfill or region no. Intl. Jump RegionFormatter to initialize.

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: running the Application Photos

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: since the passage of null in [Object Photos.PreStartupViewController:object619]

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: send request: GET https://p18-photosws.icloud.com:443/ph/startup? clientBuildNumber = 15 G 78 & tanceId=BFE94A4F-B245-45BF-9445-4A3DD396835C&dsid=1029823930&locale=pt-br&cruuid clientIns = 7 d 091310-0f49-4ff0-b86a-29663ff377d9

  Tuesday, February 2, 2016 17:46:19 GMT: DEBUG :--> request 1: GO to https://p18-1-photosws.icloud.com:443/ph/startup? clientBuildNumber = 15 G 78 & clientI nstanceId=BFE94A4F-B245-45BF-9445-4A3DD396835C&dsid=1029823930&locale=pt-br&cruu id = 7 d 091310-0f49-4ff0-b86a-29663ff377d9, headers: body [object Object],: (omitted)

  Tuesday, February 2, 2016 17:46:31 GMT: ERROR: error recovery/starting. (500) response: {"requestUUID": "a4663688-cb28-43f6-00ff-04f22ae7bbf5", "errorReason": "Internal Server Error", "error code": 500}

  Can someone help me?

  I tried to disable the photos on my iphone app, turn back on, nothing works.

  The strange is that the problem is just on icloud.com. Sync on my ipad, iphone and windows app work perfectly. Does anyone have an idea? Its been going on for 20 days

• Satellite A65-S126: I get error codes 7 and 4 - need to replace the internal RAM

  I was making mistakes first when I boot.
  Windows has a file missing or currupted (isapnp.sys).
  So I try to make a startup disk XP repair and while it is endearing to copy files, I receive other errror ' blah blah error code is 7 or 4.

  I did some research on all three errors and every difficulty unique potintial ram bad or bad Bios settings. I tried to reset the cmos and I've updated since the last version of toshiba. Always the same thing.

  I also replaced the ram with two sticks, that I had. The same problem. I think there must be some on board the cause of ram that I can get out the chip from the bottom and the laptop will always start and says it has installed 256.

  Where and how we replace RAM or what do you think?

  Thank you.

  Have you tested the memory? You can use Memtest www.memtest.org which is a floppy disk or a CD.

  Perhaps the error is just guessing what the problem is. File copy errors can also be caused by a scratched or damaged CD, bad CPU, defective HARD drive, faulty DVD drive or motherboard. If Memtest passes, then test the hard drive for bad sectors.